|  | /* | 
|  | * (C) Copyright 2003 | 
|  | * Steven Scholz, imc Measurement & Control, steven.scholz@imc-berlin.de | 
|  | * | 
|  | * (C) Copyright 2002 | 
|  | * Rich Ireland, Enterasys Networks, rireland@enterasys.com. | 
|  | * | 
|  | * See file CREDITS for list of people who contributed to this | 
|  | * project. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation; either version 2 of | 
|  | * the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
|  | * MA 02111-1307 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | /* | 
|  | *  Altera FPGA support | 
|  | */ | 
|  | #include <common.h> | 
|  | #include <ACEX1K.h> | 
|  | #include <stratixII.h> | 
|  |  | 
|  | /* Define FPGA_DEBUG to get debug printf's */ | 
|  | /* #define FPGA_DEBUG */ | 
|  |  | 
|  | #ifdef	FPGA_DEBUG | 
|  | #define	PRINTF(fmt,args...)	printf (fmt ,##args) | 
|  | #else | 
|  | #define PRINTF(fmt,args...) | 
|  | #endif | 
|  |  | 
|  | /* Local Static Functions */ | 
|  | static int altera_validate (Altera_desc * desc, const char *fn); | 
|  |  | 
|  | /* ------------------------------------------------------------------------- */ | 
|  | int altera_load( Altera_desc *desc, void *buf, size_t bsize ) | 
|  | { | 
|  | int ret_val = FPGA_FAIL;	/* assume a failure */ | 
|  |  | 
|  | if (!altera_validate (desc, (char *)__FUNCTION__)) { | 
|  | printf ("%s: Invalid device descriptor\n", __FUNCTION__); | 
|  | } else { | 
|  | switch (desc->family) { | 
|  | case Altera_ACEX1K: | 
|  | case Altera_CYC2: | 
|  | #if defined(CONFIG_FPGA_ACEX1K) | 
|  | PRINTF ("%s: Launching the ACEX1K Loader...\n", | 
|  | __FUNCTION__); | 
|  | ret_val = ACEX1K_load (desc, buf, bsize); | 
|  | #elif defined(CONFIG_FPGA_CYCLON2) | 
|  | PRINTF ("%s: Launching the CYCLON II Loader...\n", | 
|  | __FUNCTION__); | 
|  | ret_val = CYC2_load (desc, buf, bsize); | 
|  | #else | 
|  | printf ("%s: No support for ACEX1K devices.\n", | 
|  | __FUNCTION__); | 
|  | #endif | 
|  | break; | 
|  |  | 
|  | #if defined(CONFIG_FPGA_STRATIX_II) | 
|  | case Altera_StratixII: | 
|  | PRINTF ("%s: Launching the Stratix II Loader...\n", | 
|  | __FUNCTION__); | 
|  | ret_val = StratixII_load (desc, buf, bsize); | 
|  | break; | 
|  | #endif | 
|  | default: | 
|  | printf ("%s: Unsupported family type, %d\n", | 
|  | __FUNCTION__, desc->family); | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | int altera_dump( Altera_desc *desc, void *buf, size_t bsize ) | 
|  | { | 
|  | int ret_val = FPGA_FAIL;	/* assume a failure */ | 
|  |  | 
|  | if (!altera_validate (desc, (char *)__FUNCTION__)) { | 
|  | printf ("%s: Invalid device descriptor\n", __FUNCTION__); | 
|  | } else { | 
|  | switch (desc->family) { | 
|  | case Altera_ACEX1K: | 
|  | #if defined(CONFIG_FPGA_ACEX) | 
|  | PRINTF ("%s: Launching the ACEX1K Reader...\n", | 
|  | __FUNCTION__); | 
|  | ret_val = ACEX1K_dump (desc, buf, bsize); | 
|  | #else | 
|  | printf ("%s: No support for ACEX1K devices.\n", | 
|  | __FUNCTION__); | 
|  | #endif | 
|  | break; | 
|  |  | 
|  | #if defined(CONFIG_FPGA_STRATIX_II) | 
|  | case Altera_StratixII: | 
|  | PRINTF ("%s: Launching the Stratix II Reader...\n", | 
|  | __FUNCTION__); | 
|  | ret_val = StratixII_dump (desc, buf, bsize); | 
|  | break; | 
|  | #endif | 
|  | default: | 
|  | printf ("%s: Unsupported family type, %d\n", | 
|  | __FUNCTION__, desc->family); | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | int altera_info( Altera_desc *desc ) | 
|  | { | 
|  | int ret_val = FPGA_FAIL; | 
|  |  | 
|  | if (altera_validate (desc, (char *)__FUNCTION__)) { | 
|  | printf ("Family:        \t"); | 
|  | switch (desc->family) { | 
|  | case Altera_ACEX1K: | 
|  | printf ("ACEX1K\n"); | 
|  | break; | 
|  | case Altera_CYC2: | 
|  | printf ("CYCLON II\n"); | 
|  | break; | 
|  | case Altera_StratixII: | 
|  | printf ("Stratix II\n"); | 
|  | break; | 
|  | /* Add new family types here */ | 
|  | default: | 
|  | printf ("Unknown family type, %d\n", desc->family); | 
|  | } | 
|  |  | 
|  | printf ("Interface type:\t"); | 
|  | switch (desc->iface) { | 
|  | case passive_serial: | 
|  | printf ("Passive Serial (PS)\n"); | 
|  | break; | 
|  | case passive_parallel_synchronous: | 
|  | printf ("Passive Parallel Synchronous (PPS)\n"); | 
|  | break; | 
|  | case passive_parallel_asynchronous: | 
|  | printf ("Passive Parallel Asynchronous (PPA)\n"); | 
|  | break; | 
|  | case passive_serial_asynchronous: | 
|  | printf ("Passive Serial Asynchronous (PSA)\n"); | 
|  | break; | 
|  | case altera_jtag_mode:		/* Not used */ | 
|  | printf ("JTAG Mode\n"); | 
|  | break; | 
|  | case fast_passive_parallel: | 
|  | printf ("Fast Passive Parallel (FPP)\n"); | 
|  | break; | 
|  | case fast_passive_parallel_security: | 
|  | printf | 
|  | ("Fast Passive Parallel with Security (FPPS) \n"); | 
|  | break; | 
|  | /* Add new interface types here */ | 
|  | default: | 
|  | printf ("Unsupported interface type, %d\n", desc->iface); | 
|  | } | 
|  |  | 
|  | printf ("Device Size:   \t%d bytes\n" | 
|  | "Cookie:        \t0x%x (%d)\n", | 
|  | desc->size, desc->cookie, desc->cookie); | 
|  |  | 
|  | if (desc->iface_fns) { | 
|  | printf ("Device Function Table @ 0x%p\n", desc->iface_fns); | 
|  | switch (desc->family) { | 
|  | case Altera_ACEX1K: | 
|  | case Altera_CYC2: | 
|  | #if defined(CONFIG_FPGA_ACEX1K) | 
|  | ACEX1K_info (desc); | 
|  | #elif defined(CONFIG_FPGA_CYCLON2) | 
|  | CYC2_info (desc); | 
|  | #else | 
|  | /* just in case */ | 
|  | printf ("%s: No support for ACEX1K devices.\n", | 
|  | __FUNCTION__); | 
|  | #endif | 
|  | break; | 
|  | #if defined(CONFIG_FPGA_STRATIX_II) | 
|  | case Altera_StratixII: | 
|  | StratixII_info (desc); | 
|  | break; | 
|  | #endif | 
|  | /* Add new family types here */ | 
|  | default: | 
|  | /* we don't need a message here - we give one up above */ | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | printf ("No Device Function Table.\n"); | 
|  | } | 
|  |  | 
|  | ret_val = FPGA_SUCCESS; | 
|  | } else { | 
|  | printf ("%s: Invalid device descriptor\n", __FUNCTION__); | 
|  | } | 
|  |  | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | int altera_reloc( Altera_desc *desc, ulong reloc_offset) | 
|  | { | 
|  | int ret_val = FPGA_FAIL;	/* assume a failure */ | 
|  |  | 
|  | if (!altera_validate (desc, (char *)__FUNCTION__)) { | 
|  | printf ("%s: Invalid device descriptor\n", __FUNCTION__); | 
|  | } else { | 
|  | switch (desc->family) { | 
|  | case Altera_ACEX1K: | 
|  | #if defined(CONFIG_FPGA_ACEX1K) | 
|  | ret_val = ACEX1K_reloc (desc, reloc_offset); | 
|  | #else | 
|  | printf ("%s: No support for ACEX devices.\n", | 
|  | __FUNCTION__); | 
|  | #endif | 
|  | break; | 
|  | #if defined(CONFIG_FPGA_STRATIX_II) | 
|  | case Altera_StratixII: | 
|  | ret_val = StratixII_reloc (desc, reloc_offset); | 
|  | break; | 
|  | #endif | 
|  | case Altera_CYC2: | 
|  | #if defined(CONFIG_FPGA_CYCLON2) | 
|  | ret_val = CYC2_reloc (desc, reloc_offset); | 
|  | #else | 
|  | printf ("%s: No support for CYCLON II devices.\n", | 
|  | __FUNCTION__); | 
|  | #endif | 
|  | break; | 
|  | /* Add new family types here */ | 
|  | default: | 
|  | printf ("%s: Unsupported family type, %d\n", | 
|  | __FUNCTION__, desc->family); | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /* ------------------------------------------------------------------------- */ | 
|  |  | 
|  | static int altera_validate (Altera_desc * desc, const char *fn) | 
|  | { | 
|  | int ret_val = FALSE; | 
|  |  | 
|  | if (desc) { | 
|  | if ((desc->family > min_altera_type) && | 
|  | (desc->family < max_altera_type)) { | 
|  | if ((desc->iface > min_altera_iface_type) && | 
|  | (desc->iface < max_altera_iface_type)) { | 
|  | if (desc->size) { | 
|  | ret_val = TRUE; | 
|  | } else { | 
|  | printf ("%s: NULL part size\n", fn); | 
|  | } | 
|  | } else { | 
|  | printf ("%s: Invalid Interface type, %d\n", | 
|  | fn, desc->iface); | 
|  | } | 
|  | } else { | 
|  | printf ("%s: Invalid family type, %d\n", fn, desc->family); | 
|  | } | 
|  | } else { | 
|  | printf ("%s: NULL descriptor!\n", fn); | 
|  | } | 
|  |  | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /* ------------------------------------------------------------------------- */ |