| /* | |
| * (C) Copyright 2011, Julius Baxter <julius@opencores.org> | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #ifndef __ASM_OPENRISC_IO_H | |
| #define __ASM_OPENRISC_IO_H | |
| /* | |
| * Given a physical address and a length, return a virtual address | |
| * that can be used to access the memory range with the caching | |
| * properties specified by "flags". | |
| */ | |
| #define MAP_NOCACHE (0) | |
| #define MAP_WRCOMBINE (0) | |
| #define MAP_WRBACK (0) | |
| #define MAP_WRTHROUGH (0) | |
| static inline void * | |
| map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) | |
| { | |
| return (void *)paddr; | |
| } | |
| /* | |
| * Take down a mapping set up by map_physmem(). | |
| */ | |
| static inline void unmap_physmem(void *vaddr, unsigned long flags) | |
| { | |
| } | |
| /* | |
| * Change virtual addresses to physical addresses | |
| */ | |
| static inline phys_addr_t virt_to_phys(void *vaddr) | |
| { | |
| return (phys_addr_t)(vaddr); | |
| } | |
| /* | |
| * readX/writeX() are used to access memory mapped devices. On some | |
| * architectures the memory mapped IO stuff needs to be accessed | |
| * differently. On the openrisc architecture, we just read/write the | |
| * memory location directly. | |
| */ | |
| #define readb(addr) (*(volatile unsigned char *) (addr)) | |
| #define readw(addr) (*(volatile unsigned short *) (addr)) | |
| #define readl(addr) (*(volatile unsigned int *) (addr)) | |
| #define __raw_readb readb | |
| #define __raw_readw readw | |
| #define __raw_readl readl | |
| #define writeb(b, addr) ((*(volatile unsigned char *) (addr)) = (b)) | |
| #define writew(b, addr) ((*(volatile unsigned short *) (addr)) = (b)) | |
| #define writel(b, addr) ((*(volatile unsigned int *) (addr)) = (b)) | |
| #define __raw_writeb writeb | |
| #define __raw_writew writew | |
| #define __raw_writel writel | |
| #define memset_io(a, b, c) memset((void *)(a), (b), (c)) | |
| #define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c)) | |
| #define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c)) | |
| /* | |
| * Again, OpenRISC does not require mem IO specific function. | |
| */ | |
| #define IO_BASE 0x0 | |
| #define IO_SPACE_LIMIT 0xffffffff | |
| #define inb(port) readb((port + IO_BASE)) | |
| #define outb(value, port) writeb((value), (port + IO_BASE)) | |
| #define inb_p(port) inb((port)) | |
| #define outb_p(value, port) outb((value), (port)) | |
| /* | |
| * Convert a physical pointer to a virtual kernel pointer for /dev/mem | |
| * access | |
| */ | |
| #define xlate_dev_mem_ptr(p) __va(p) | |
| /* | |
| * Convert a virtual cached pointer to an uncached pointer | |
| */ | |
| #define xlate_dev_kmem_ptr(p) p | |
| #define ioread8(addr) readb(addr) | |
| #define ioread16(addr) readw(addr) | |
| #define ioread32(addr) readl(addr) | |
| #define iowrite8(v, addr) writeb((v), (addr)) | |
| #define iowrite16(v, addr) writew((v), (addr)) | |
| #define iowrite32(v, addr) writel((v), (addr)) | |
| #endif |