| /* | |
| * Copyright (c) 2013, Google Inc. | |
| * | |
| * (C) Copyright 2008 Semihalf | |
| * | |
| * (C) Copyright 2000-2006 | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #include <common.h> | |
| #include <fdt_support.h> | |
| #include <errno.h> | |
| #include <image.h> | |
| #include <libfdt.h> | |
| #include <asm/io.h> | |
| #ifndef CONFIG_SYS_FDT_PAD | |
| #define CONFIG_SYS_FDT_PAD 0x3000 | |
| #endif | |
| DECLARE_GLOBAL_DATA_PTR; | |
| static void fdt_error(const char *msg) | |
| { | |
| puts("ERROR: "); | |
| puts(msg); | |
| puts(" - must RESET the board to recover.\n"); | |
| } | |
| static const image_header_t *image_get_fdt(ulong fdt_addr) | |
| { | |
| const image_header_t *fdt_hdr = map_sysmem(fdt_addr, 0); | |
| image_print_contents(fdt_hdr); | |
| puts(" Verifying Checksum ... "); | |
| if (!image_check_hcrc(fdt_hdr)) { | |
| fdt_error("fdt header checksum invalid"); | |
| return NULL; | |
| } | |
| if (!image_check_dcrc(fdt_hdr)) { | |
| fdt_error("fdt checksum invalid"); | |
| return NULL; | |
| } | |
| puts("OK\n"); | |
| if (!image_check_type(fdt_hdr, IH_TYPE_FLATDT)) { | |
| fdt_error("uImage is not a fdt"); | |
| return NULL; | |
| } | |
| if (image_get_comp(fdt_hdr) != IH_COMP_NONE) { | |
| fdt_error("uImage is compressed"); | |
| return NULL; | |
| } | |
| if (fdt_check_header((void *)image_get_data(fdt_hdr)) != 0) { | |
| fdt_error("uImage data is not a fdt"); | |
| return NULL; | |
| } | |
| return fdt_hdr; | |
| } | |
| /** | |
| * boot_fdt_add_mem_rsv_regions - Mark the memreserve sections as unusable | |
| * @lmb: pointer to lmb handle, will be used for memory mgmt | |
| * @fdt_blob: pointer to fdt blob base address | |
| * | |
| * Adds the memreserve regions in the dtb to the lmb block. Adding the | |
| * memreserve regions prevents u-boot from using them to store the initrd | |
| * or the fdt blob. | |
| */ | |
| void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob) | |
| { | |
| uint64_t addr, size; | |
| int i, total; | |
| if (fdt_check_header(fdt_blob) != 0) | |
| return; | |
| total = fdt_num_mem_rsv(fdt_blob); | |
| for (i = 0; i < total; i++) { | |
| if (fdt_get_mem_rsv(fdt_blob, i, &addr, &size) != 0) | |
| continue; | |
| printf(" reserving fdt memory region: addr=%llx size=%llx\n", | |
| (unsigned long long)addr, (unsigned long long)size); | |
| lmb_reserve(lmb, addr, size); | |
| } | |
| } | |
| /** | |
| * boot_relocate_fdt - relocate flat device tree | |
| * @lmb: pointer to lmb handle, will be used for memory mgmt | |
| * @of_flat_tree: pointer to a char* variable, will hold fdt start address | |
| * @of_size: pointer to a ulong variable, will hold fdt length | |
| * | |
| * boot_relocate_fdt() allocates a region of memory within the bootmap and | |
| * relocates the of_flat_tree into that region, even if the fdt is already in | |
| * the bootmap. It also expands the size of the fdt by CONFIG_SYS_FDT_PAD | |
| * bytes. | |
| * | |
| * of_flat_tree and of_size are set to final (after relocation) values | |
| * | |
| * returns: | |
| * 0 - success | |
| * 1 - failure | |
| */ | |
| int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size) | |
| { | |
| void *fdt_blob = *of_flat_tree; | |
| void *of_start = NULL; | |
| char *fdt_high; | |
| ulong of_len = 0; | |
| int err; | |
| int disable_relocation = 0; | |
| /* nothing to do */ | |
| if (*of_size == 0) | |
| return 0; | |
| if (fdt_check_header(fdt_blob) != 0) { | |
| fdt_error("image is not a fdt"); | |
| goto error; | |
| } | |
| /* position on a 4K boundary before the alloc_current */ | |
| /* Pad the FDT by a specified amount */ | |
| of_len = *of_size + CONFIG_SYS_FDT_PAD; | |
| /* If fdt_high is set use it to select the relocation address */ | |
| fdt_high = getenv("fdt_high"); | |
| if (fdt_high) { | |
| void *desired_addr = (void *)simple_strtoul(fdt_high, NULL, 16); | |
| if (((ulong) desired_addr) == ~0UL) { | |
| /* All ones means use fdt in place */ | |
| of_start = fdt_blob; | |
| lmb_reserve(lmb, (ulong)of_start, of_len); | |
| disable_relocation = 1; | |
| } else if (desired_addr) { | |
| of_start = | |
| (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000, | |
| (ulong)desired_addr); | |
| if (of_start == NULL) { | |
| puts("Failed using fdt_high value for Device Tree"); | |
| goto error; | |
| } | |
| } else { | |
| of_start = | |
| (void *)(ulong) lmb_alloc(lmb, of_len, 0x1000); | |
| } | |
| } else { | |
| of_start = | |
| (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000, | |
| getenv_bootm_mapsize() | |
| + getenv_bootm_low()); | |
| } | |
| if (of_start == NULL) { | |
| puts("device tree - allocation error\n"); | |
| goto error; | |
| } | |
| if (disable_relocation) { | |
| /* | |
| * We assume there is space after the existing fdt to use | |
| * for padding | |
| */ | |
| fdt_set_totalsize(of_start, of_len); | |
| printf(" Using Device Tree in place at %p, end %p\n", | |
| of_start, of_start + of_len - 1); | |
| } else { | |
| debug("## device tree at %p ... %p (len=%ld [0x%lX])\n", | |
| fdt_blob, fdt_blob + *of_size - 1, of_len, of_len); | |
| printf(" Loading Device Tree to %p, end %p ... ", | |
| of_start, of_start + of_len - 1); | |
| err = fdt_open_into(fdt_blob, of_start, of_len); | |
| if (err != 0) { | |
| fdt_error("fdt move failed"); | |
| goto error; | |
| } | |
| puts("OK\n"); | |
| } | |
| *of_flat_tree = of_start; | |
| *of_size = of_len; | |
| set_working_fdt_addr(*of_flat_tree); | |
| return 0; | |
| error: | |
| return 1; | |
| } | |
| /** | |
| * boot_get_fdt - main fdt handling routine | |
| * @argc: command argument count | |
| * @argv: command argument list | |
| * @arch: architecture (IH_ARCH_...) | |
| * @images: pointer to the bootm images structure | |
| * @of_flat_tree: pointer to a char* variable, will hold fdt start address | |
| * @of_size: pointer to a ulong variable, will hold fdt length | |
| * | |
| * boot_get_fdt() is responsible for finding a valid flat device tree image. | |
| * Curently supported are the following ramdisk sources: | |
| * - multicomponent kernel/ramdisk image, | |
| * - commandline provided address of decicated ramdisk image. | |
| * | |
| * returns: | |
| * 0, if fdt image was found and valid, or skipped | |
| * of_flat_tree and of_size are set to fdt start address and length if | |
| * fdt image is found and valid | |
| * | |
| * 1, if fdt image is found but corrupted | |
| * of_flat_tree and of_size are set to 0 if no fdt exists | |
| */ | |
| int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch, | |
| bootm_headers_t *images, char **of_flat_tree, ulong *of_size) | |
| { | |
| const image_header_t *fdt_hdr; | |
| ulong fdt_addr; | |
| char *fdt_blob = NULL; | |
| ulong image_start, image_data, image_end; | |
| ulong load, load_end; | |
| void *buf; | |
| #if defined(CONFIG_FIT) | |
| const char *fit_uname_config = images->fit_uname_cfg; | |
| const char *fit_uname_fdt = NULL; | |
| ulong default_addr; | |
| int fdt_noffset; | |
| #endif | |
| const char *select = NULL; | |
| *of_flat_tree = NULL; | |
| *of_size = 0; | |
| if (argc > 2) | |
| select = argv[2]; | |
| if (select || genimg_has_config(images)) { | |
| #if defined(CONFIG_FIT) | |
| if (select) { | |
| /* | |
| * If the FDT blob comes from the FIT image and the | |
| * FIT image address is omitted in the command line | |
| * argument, try to use ramdisk or os FIT image | |
| * address or default load address. | |
| */ | |
| if (images->fit_uname_rd) | |
| default_addr = (ulong)images->fit_hdr_rd; | |
| else if (images->fit_uname_os) | |
| default_addr = (ulong)images->fit_hdr_os; | |
| else | |
| default_addr = load_addr; | |
| if (fit_parse_conf(select, default_addr, | |
| &fdt_addr, &fit_uname_config)) { | |
| debug("* fdt: config '%s' from image at 0x%08lx\n", | |
| fit_uname_config, fdt_addr); | |
| } else if (fit_parse_subimage(select, default_addr, | |
| &fdt_addr, &fit_uname_fdt)) { | |
| debug("* fdt: subimage '%s' from image at 0x%08lx\n", | |
| fit_uname_fdt, fdt_addr); | |
| } else | |
| #endif | |
| { | |
| fdt_addr = simple_strtoul(select, NULL, 16); | |
| debug("* fdt: cmdline image address = 0x%08lx\n", | |
| fdt_addr); | |
| } | |
| #if defined(CONFIG_FIT) | |
| } else { | |
| /* use FIT configuration provided in first bootm | |
| * command argument | |
| */ | |
| fdt_addr = map_to_sysmem(images->fit_hdr_os); | |
| fdt_noffset = fit_get_node_from_config(images, | |
| FIT_FDT_PROP, | |
| fdt_addr); | |
| if (fdt_noffset == -ENOLINK) | |
| return 0; | |
| else if (fdt_noffset < 0) | |
| return 1; | |
| } | |
| #endif | |
| debug("## Checking for 'FDT'/'FDT Image' at %08lx\n", | |
| fdt_addr); | |
| /* copy from dataflash if needed */ | |
| fdt_addr = genimg_get_image(fdt_addr); | |
| /* | |
| * Check if there is an FDT image at the | |
| * address provided in the second bootm argument | |
| * check image type, for FIT images get a FIT node. | |
| */ | |
| buf = map_sysmem(fdt_addr, 0); | |
| switch (genimg_get_format(buf)) { | |
| case IMAGE_FORMAT_LEGACY: | |
| /* verify fdt_addr points to a valid image header */ | |
| printf("## Flattened Device Tree from Legacy Image at %08lx\n", | |
| fdt_addr); | |
| fdt_hdr = image_get_fdt(fdt_addr); | |
| if (!fdt_hdr) | |
| goto error; | |
| /* | |
| * move image data to the load address, | |
| * make sure we don't overwrite initial image | |
| */ | |
| image_start = (ulong)fdt_hdr; | |
| image_data = (ulong)image_get_data(fdt_hdr); | |
| image_end = image_get_image_end(fdt_hdr); | |
| load = image_get_load(fdt_hdr); | |
| load_end = load + image_get_data_size(fdt_hdr); | |
| if (load == image_start || | |
| load == image_data) { | |
| fdt_blob = (char *)image_data; | |
| break; | |
| } | |
| if ((load < image_end) && (load_end > image_start)) { | |
| fdt_error("fdt overwritten"); | |
| goto error; | |
| } | |
| debug(" Loading FDT from 0x%08lx to 0x%08lx\n", | |
| image_data, load); | |
| memmove((void *)load, | |
| (void *)image_data, | |
| image_get_data_size(fdt_hdr)); | |
| fdt_addr = load; | |
| break; | |
| case IMAGE_FORMAT_FIT: | |
| /* | |
| * This case will catch both: new uImage format | |
| * (libfdt based) and raw FDT blob (also libfdt | |
| * based). | |
| */ | |
| #if defined(CONFIG_FIT) | |
| /* check FDT blob vs FIT blob */ | |
| if (fit_check_format(buf)) { | |
| ulong load, len; | |
| fdt_noffset = fit_image_load(images, | |
| FIT_FDT_PROP, | |
| fdt_addr, &fit_uname_fdt, | |
| &fit_uname_config, | |
| arch, IH_TYPE_FLATDT, | |
| BOOTSTAGE_ID_FIT_FDT_START, | |
| FIT_LOAD_OPTIONAL, &load, &len); | |
| images->fit_hdr_fdt = map_sysmem(fdt_addr, 0); | |
| images->fit_uname_fdt = fit_uname_fdt; | |
| images->fit_noffset_fdt = fdt_noffset; | |
| fdt_addr = load; | |
| break; | |
| } else | |
| #endif | |
| { | |
| /* | |
| * FDT blob | |
| */ | |
| debug("* fdt: raw FDT blob\n"); | |
| printf("## Flattened Device Tree blob at %08lx\n", | |
| (long)fdt_addr); | |
| } | |
| break; | |
| default: | |
| puts("ERROR: Did not find a cmdline Flattened Device Tree\n"); | |
| goto error; | |
| } | |
| printf(" Booting using the fdt blob at %#08lx\n", fdt_addr); | |
| fdt_blob = map_sysmem(fdt_addr, 0); | |
| } else if (images->legacy_hdr_valid && | |
| image_check_type(&images->legacy_hdr_os_copy, | |
| IH_TYPE_MULTI)) { | |
| ulong fdt_data, fdt_len; | |
| /* | |
| * Now check if we have a legacy multi-component image, | |
| * get second entry data start address and len. | |
| */ | |
| printf("## Flattened Device Tree from multi component Image at %08lX\n", | |
| (ulong)images->legacy_hdr_os); | |
| image_multi_getimg(images->legacy_hdr_os, 2, &fdt_data, | |
| &fdt_len); | |
| if (fdt_len) { | |
| fdt_blob = (char *)fdt_data; | |
| printf(" Booting using the fdt at 0x%p\n", fdt_blob); | |
| if (fdt_check_header(fdt_blob) != 0) { | |
| fdt_error("image is not a fdt"); | |
| goto error; | |
| } | |
| if (fdt_totalsize(fdt_blob) != fdt_len) { | |
| fdt_error("fdt size != image size"); | |
| goto error; | |
| } | |
| } else { | |
| debug("## No Flattened Device Tree\n"); | |
| return 0; | |
| } | |
| } else { | |
| debug("## No Flattened Device Tree\n"); | |
| return 0; | |
| } | |
| *of_flat_tree = fdt_blob; | |
| *of_size = fdt_totalsize(fdt_blob); | |
| debug(" of_flat_tree at 0x%08lx size 0x%08lx\n", | |
| (ulong)*of_flat_tree, *of_size); | |
| return 0; | |
| error: | |
| *of_flat_tree = NULL; | |
| *of_size = 0; | |
| return 1; | |
| } | |
| /* | |
| * Verify the device tree. | |
| * | |
| * This function is called after all device tree fix-ups have been enacted, | |
| * so that the final device tree can be verified. The definition of "verified" | |
| * is up to the specific implementation. However, it generally means that the | |
| * addresses of some of the devices in the device tree are compared with the | |
| * actual addresses at which U-Boot has placed them. | |
| * | |
| * Returns 1 on success, 0 on failure. If 0 is returned, U-boot will halt the | |
| * boot process. | |
| */ | |
| __weak int ft_verify_fdt(void *fdt) | |
| { | |
| return 1; | |
| } | |
| __weak int arch_fixup_memory_node(void *blob) | |
| { | |
| return 0; | |
| } | |
| int image_setup_libfdt(bootm_headers_t *images, void *blob, | |
| int of_size, struct lmb *lmb) | |
| { | |
| ulong *initrd_start = &images->initrd_start; | |
| ulong *initrd_end = &images->initrd_end; | |
| int ret; | |
| if (fdt_chosen(blob, 1) < 0) { | |
| puts("ERROR: /chosen node create failed"); | |
| puts(" - must RESET the board to recover.\n"); | |
| return -1; | |
| } | |
| arch_fixup_memory_node(blob); | |
| if (IMAAGE_OF_BOARD_SETUP) | |
| ft_board_setup(blob, gd->bd); | |
| fdt_fixup_ethernet(blob); | |
| /* Delete the old LMB reservation */ | |
| lmb_free(lmb, (phys_addr_t)(u32)(uintptr_t)blob, | |
| (phys_size_t)fdt_totalsize(blob)); | |
| ret = fdt_resize(blob); | |
| if (ret < 0) | |
| return ret; | |
| of_size = ret; | |
| if (*initrd_start && *initrd_end) { | |
| of_size += FDT_RAMDISK_OVERHEAD; | |
| fdt_set_totalsize(blob, of_size); | |
| } | |
| /* Create a new LMB reservation */ | |
| lmb_reserve(lmb, (ulong)blob, of_size); | |
| fdt_initrd(blob, *initrd_start, *initrd_end, 1); | |
| if (!ft_verify_fdt(blob)) | |
| return -1; | |
| return 0; | |
| } |