| /* | |
| * (C) Copyright 2013 Atmel Corporation. | |
| * Josh Wu <josh.wu@atmel.com> | |
| * | |
| * Configuation settings for the AT91SAM9N12-EK boards. | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #ifndef __AT91SAM9N12_CONFIG_H_ | |
| #define __AT91SAM9N12_CONFIG_H_ | |
| /* | |
| * SoC must be defined first, before hardware.h is included. | |
| * In this case SoC is defined in boards.cfg. | |
| */ | |
| #include <asm/hardware.h> | |
| #define CONFIG_SYS_TEXT_BASE 0x26f00000 | |
| #define CONFIG_ARM926EJS | |
| #define CONFIG_AT91FAMILY | |
| /* ARM asynchronous clock */ | |
| #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ | |
| #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */ | |
| /* Misc CPU related */ | |
| #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ | |
| #define CONFIG_SETUP_MEMORY_TAGS | |
| #define CONFIG_INITRD_TAG | |
| #define CONFIG_SKIP_LOWLEVEL_INIT | |
| #define CONFIG_BOARD_EARLY_INIT_F | |
| #define CONFIG_DISPLAY_CPUINFO | |
| #define CONFIG_OF_LIBFDT | |
| /* general purpose I/O */ | |
| #define CONFIG_AT91_GPIO | |
| /* serial console */ | |
| #define CONFIG_ATMEL_USART | |
| #define CONFIG_USART_BASE ATMEL_BASE_DBGU | |
| #define CONFIG_USART_ID ATMEL_ID_SYS | |
| #define CONFIG_BAUDRATE 115200 | |
| /* LCD */ | |
| #define CONFIG_LCD | |
| #define LCD_BPP LCD_COLOR16 | |
| #define LCD_OUTPUT_BPP 24 | |
| #define CONFIG_LCD_LOGO | |
| #define CONFIG_LCD_INFO | |
| #define CONFIG_LCD_INFO_BELOW_LOGO | |
| #define CONFIG_SYS_WHITE_ON_BLACK | |
| #define CONFIG_ATMEL_HLCD | |
| #define CONFIG_ATMEL_LCD_RGB565 | |
| #define CONFIG_SYS_CONSOLE_IS_IN_ENV | |
| #define CONFIG_BOOTDELAY 3 | |
| /* | |
| * BOOTP options | |
| */ | |
| #define CONFIG_BOOTP_BOOTFILESIZE | |
| #define CONFIG_BOOTP_BOOTPATH | |
| #define CONFIG_BOOTP_GATEWAY | |
| #define CONFIG_BOOTP_HOSTNAME | |
| /* NOR flash - no real flash on this board */ | |
| #define CONFIG_SYS_NO_FLASH | |
| /* | |
| * Command line configuration. | |
| */ | |
| #include <config_cmd_default.h> | |
| #undef CONFIG_CMD_FPGA | |
| #define CONFIG_CMD_BOOTZ | |
| #define CONFIG_CMD_PING | |
| #define CONFIG_CMD_DHCP | |
| #define CONFIG_CMD_NAND | |
| #define CONFIG_CMD_SF | |
| #define CONFIG_CMD_MMC | |
| #define CONFIG_CMD_FAT | |
| #define CONFIG_CMD_USB | |
| #define CONFIG_NR_DRAM_BANKS 1 | |
| #define CONFIG_SYS_SDRAM_BASE 0x20000000 | |
| #define CONFIG_SYS_SDRAM_SIZE 0x08000000 | |
| /* | |
| * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, | |
| * leaving the correct space for initial global data structure above | |
| * that address while providing maximum stack area below. | |
| */ | |
| # define CONFIG_SYS_INIT_SP_ADDR \ | |
| (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE) | |
| /* DataFlash */ | |
| #ifdef CONFIG_CMD_SF | |
| #define CONFIG_ATMEL_SPI | |
| #define CONFIG_SPI_FLASH | |
| #define CONFIG_SPI_FLASH_ATMEL | |
| #define CONFIG_SF_DEFAULT_SPEED 30000000 | |
| #define CONFIG_ENV_SPI_MODE SPI_MODE_3 | |
| #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 | |
| #endif | |
| /* NAND flash */ | |
| #ifdef CONFIG_CMD_NAND | |
| #define CONFIG_NAND_ATMEL | |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| #define CONFIG_SYS_NAND_BASE 0x40000000 | |
| #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) | |
| #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) | |
| #define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(4) | |
| #define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PD(5) | |
| /* PMECC & PMERRLOC */ | |
| #define CONFIG_ATMEL_NAND_HWECC | |
| #define CONFIG_ATMEL_NAND_HW_PMECC | |
| #define CONFIG_PMECC_CAP 2 | |
| #define CONFIG_PMECC_SECTOR_SIZE 512 | |
| #define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000 | |
| #define CONFIG_CMD_NAND_TRIMFFS | |
| #endif | |
| #define CONFIG_MTD_PARTITIONS | |
| #define CONFIG_MTD_DEVICE | |
| #define CONFIG_CMD_MTDPARTS | |
| #define MTDIDS_DEFAULT "nand0=atmel_nand" | |
| #define MTDPARTS_DEFAULT \ | |
| "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ | |
| "256k(env),256k(env_redundant),256k(spare)," \ | |
| "512k(dtb),6M(kernel)ro,-(rootfs)" | |
| #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| "console=console=ttyS0,115200\0" \ | |
| "mtdparts="MTDPARTS_DEFAULT"\0" \ | |
| "bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\ | |
| "bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0" | |
| /* MMC */ | |
| #ifdef CONFIG_CMD_MMC | |
| #define CONFIG_MMC | |
| #define CONFIG_GENERIC_MMC | |
| #define CONFIG_GENERIC_ATMEL_MCI | |
| #endif | |
| /* FAT */ | |
| #ifdef CONFIG_CMD_FAT | |
| #define CONFIG_DOS_PARTITION | |
| #endif | |
| /* Ethernet */ | |
| #define CONFIG_KS8851_MLL | |
| #define CONFIG_KS8851_MLL_BASEADDR 0x30000000 /* use NCS2 */ | |
| #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ | |
| #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE | |
| #define CONFIG_SYS_MEMTEST_END 0x26e00000 | |
| /* USB host */ | |
| #ifdef CONFIG_CMD_USB | |
| #define CONFIG_USB_ATMEL | |
| #define CONFIG_USB_ATMEL_CLK_SEL_PLLB | |
| #define CONFIG_USB_OHCI_NEW | |
| #define CONFIG_SYS_USB_OHCI_CPU_INIT | |
| #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI | |
| #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9n12" | |
| #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 | |
| #define CONFIG_USB_STORAGE | |
| #endif | |
| #ifdef CONFIG_SYS_USE_SPIFLASH | |
| /* bootstrap + u-boot + env + linux in dataflash on CS0 */ | |
| #define CONFIG_ENV_IS_IN_SPI_FLASH | |
| #define CONFIG_ENV_OFFSET 0x5000 | |
| #define CONFIG_ENV_SIZE 0x3000 | |
| #define CONFIG_ENV_SECT_SIZE 0x1000 | |
| #define CONFIG_BOOTCOMMAND \ | |
| "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ | |
| "sf probe 0; sf read 0x22000000 0x100000 0x300000; " \ | |
| "bootm 0x22000000" | |
| #elif defined(CONFIG_SYS_USE_NANDFLASH) | |
| /* bootstrap + u-boot + env + linux in nandflash */ | |
| #define CONFIG_ENV_IS_IN_NAND | |
| #define CONFIG_ENV_OFFSET 0xc0000 | |
| #define CONFIG_ENV_OFFSET_REDUND 0x100000 | |
| #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ | |
| #define CONFIG_BOOTCOMMAND \ | |
| "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ | |
| "nand read 0x21000000 0x180000 0x080000;" \ | |
| "nand read 0x22000000 0x200000 0x400000;" \ | |
| "bootm 0x22000000 - 0x21000000" | |
| #else /* CONFIG_SYS_USE_MMC */ | |
| /* bootstrap + u-boot + env + linux in mmc */ | |
| #define CONFIG_ENV_IS_IN_MMC | |
| /* For FAT system, most cases it should be in the reserved sector */ | |
| #define CONFIG_ENV_OFFSET 0x2000 | |
| #define CONFIG_ENV_SIZE 0x1000 | |
| #define CONFIG_SYS_MMC_ENV_DEV 0 | |
| #define CONFIG_BOOTCOMMAND \ | |
| "setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};" \ | |
| "fatload mmc 0:1 0x21000000 dtb;" \ | |
| "fatload mmc 0:1 0x22000000 uImage;" \ | |
| "bootm 0x22000000 - 0x21000000" | |
| #endif | |
| #define CONFIG_SYS_PROMPT "U-Boot> " | |
| #define CONFIG_SYS_CBSIZE 256 | |
| #define CONFIG_SYS_MAXARGS 16 | |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \ | |
| + 16) | |
| #define CONFIG_SYS_LONGHELP | |
| #define CONFIG_CMDLINE_EDITING | |
| #define CONFIG_AUTO_COMPLETE | |
| #define CONFIG_SYS_HUSH_PARSER | |
| /* | |
| * Size of malloc() pool | |
| */ | |
| #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) | |
| #define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ | |
| #endif |