| /* | |
| * (C) Copyright 2010,2011 | |
| * NVIDIA Corporation <www.nvidia.com> | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #ifndef __CONFIG_H | |
| #define __CONFIG_H | |
| #include <asm/sizes.h> | |
| /* LP0 suspend / resume */ | |
| #define CONFIG_TEGRA_LP0 | |
| #define CONFIG_AES | |
| #define CONFIG_TEGRA_PMU | |
| #define CONFIG_TPS6586X_POWER | |
| #define CONFIG_TEGRA_CLOCK_SCALING | |
| #include "tegra20-common.h" | |
| /* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */ | |
| #define CONFIG_DEFAULT_DEVICE_TREE tegra20-seaboard | |
| #define CONFIG_OF_CONTROL | |
| #define CONFIG_OF_SEPARATE | |
| /* High-level configuration options */ | |
| #define V_PROMPT "Tegra20 (SeaBoard) # " | |
| #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Seaboard" | |
| /* Board-specific serial config */ | |
| #define CONFIG_TEGRA_ENABLE_UARTD | |
| #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE | |
| /* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */ | |
| #define CONFIG_UART_DISABLE_GPIO GPIO_PI3 | |
| #define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD | |
| #define CONFIG_BOARD_EARLY_INIT_F | |
| #define CONFIG_BOARD_LATE_INIT /* Make sure LCD init is complete */ | |
| /* I2C */ | |
| #define CONFIG_SYS_I2C_TEGRA | |
| #define CONFIG_SYS_I2C_INIT_BOARD | |
| #define CONFIG_SYS_I2C_SPEED 100000 | |
| #define CONFIG_CMD_I2C | |
| #define CONFIG_SYS_I2C | |
| /* SD/MMC */ | |
| #define CONFIG_MMC | |
| #define CONFIG_GENERIC_MMC | |
| #define CONFIG_TEGRA_MMC | |
| #define CONFIG_CMD_MMC | |
| /* Environment in eMMC, at the end of 2nd "boot sector" */ | |
| #define CONFIG_ENV_IS_IN_MMC | |
| #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) | |
| #define CONFIG_SYS_MMC_ENV_DEV 0 | |
| #define CONFIG_SYS_MMC_ENV_PART 2 | |
| /* USB Host support */ | |
| #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 | |
| #define CONFIG_USB_EHCI | |
| #define CONFIG_USB_EHCI_TEGRA | |
| #define CONFIG_USB_STORAGE | |
| #define CONFIG_CMD_USB | |
| /* USB networking support */ | |
| #define CONFIG_USB_HOST_ETHER | |
| #define CONFIG_USB_ETHER_ASIX | |
| /* General networking support */ | |
| #define CONFIG_CMD_NET | |
| #define CONFIG_CMD_DHCP | |
| /* Enable keyboard */ | |
| #define CONFIG_TEGRA_KEYBOARD | |
| #define CONFIG_KEYBOARD | |
| /* USB keyboard */ | |
| #define CONFIG_USB_KEYBOARD | |
| /* LCD support */ | |
| #define CONFIG_LCD | |
| #define CONFIG_PWM_TEGRA | |
| #define CONFIG_VIDEO_TEGRA | |
| #define LCD_BPP LCD_COLOR16 | |
| #define CONFIG_SYS_WHITE_ON_BLACK | |
| #define CONFIG_CONSOLE_SCROLL_LINES 10 | |
| /* NAND support */ | |
| #define CONFIG_CMD_NAND | |
| #define CONFIG_TEGRA_NAND | |
| /* Max number of NAND devices */ | |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| #include "tegra-common-post.h" | |
| #endif /* __CONFIG_H */ |