| /* | |
| * Freescale i.MX28 image generator | |
| * | |
| * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> | |
| * on behalf of DENX Software Engineering GmbH | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #include <fcntl.h> | |
| #include <sys/stat.h> | |
| #include <sys/types.h> | |
| #include <unistd.h> | |
| #include "compiler.h" | |
| /* | |
| * Default BCB layout. | |
| * | |
| * TWEAK this if you have blown any OCOTP fuses. | |
| */ | |
| #define STRIDE_PAGES 64 | |
| #define STRIDE_COUNT 4 | |
| /* | |
| * Layout for 256Mb big NAND with 2048b page size, 64b OOB size and | |
| * 128kb erase size. | |
| * | |
| * TWEAK this if you have different kind of NAND chip. | |
| */ | |
| static uint32_t nand_writesize = 2048; | |
| static uint32_t nand_oobsize = 64; | |
| static uint32_t nand_erasesize = 128 * 1024; | |
| /* | |
| * Sector on which the SigmaTel boot partition (0x53) starts. | |
| */ | |
| static uint32_t sd_sector = 2048; | |
| /* | |
| * Each of the U-Boot bootstreams is at maximum 1MB big. | |
| * | |
| * TWEAK this if, for some wild reason, you need to boot bigger image. | |
| */ | |
| #define MAX_BOOTSTREAM_SIZE (1 * 1024 * 1024) | |
| /* i.MX28 NAND controller-specific constants. DO NOT TWEAK! */ | |
| #define MXS_NAND_DMA_DESCRIPTOR_COUNT 4 | |
| #define MXS_NAND_CHUNK_DATA_CHUNK_SIZE 512 | |
| #define MXS_NAND_METADATA_SIZE 10 | |
| #define MXS_NAND_COMMAND_BUFFER_SIZE 32 | |
| struct mx28_nand_fcb { | |
| uint32_t checksum; | |
| uint32_t fingerprint; | |
| uint32_t version; | |
| struct { | |
| uint8_t data_setup; | |
| uint8_t data_hold; | |
| uint8_t address_setup; | |
| uint8_t dsample_time; | |
| uint8_t nand_timing_state; | |
| uint8_t rea; | |
| uint8_t rloh; | |
| uint8_t rhoh; | |
| } timing; | |
| uint32_t page_data_size; | |
| uint32_t total_page_size; | |
| uint32_t sectors_per_block; | |
| uint32_t number_of_nands; /* Ignored */ | |
| uint32_t total_internal_die; /* Ignored */ | |
| uint32_t cell_type; /* Ignored */ | |
| uint32_t ecc_block_n_ecc_type; | |
| uint32_t ecc_block_0_size; | |
| uint32_t ecc_block_n_size; | |
| uint32_t ecc_block_0_ecc_type; | |
| uint32_t metadata_bytes; | |
| uint32_t num_ecc_blocks_per_page; | |
| uint32_t ecc_block_n_ecc_level_sdk; /* Ignored */ | |
| uint32_t ecc_block_0_size_sdk; /* Ignored */ | |
| uint32_t ecc_block_n_size_sdk; /* Ignored */ | |
| uint32_t ecc_block_0_ecc_level_sdk; /* Ignored */ | |
| uint32_t num_ecc_blocks_per_page_sdk; /* Ignored */ | |
| uint32_t metadata_bytes_sdk; /* Ignored */ | |
| uint32_t erase_threshold; | |
| uint32_t boot_patch; | |
| uint32_t patch_sectors; | |
| uint32_t firmware1_starting_sector; | |
| uint32_t firmware2_starting_sector; | |
| uint32_t sectors_in_firmware1; | |
| uint32_t sectors_in_firmware2; | |
| uint32_t dbbt_search_area_start_address; | |
| uint32_t badblock_marker_byte; | |
| uint32_t badblock_marker_start_bit; | |
| uint32_t bb_marker_physical_offset; | |
| }; | |
| struct mx28_nand_dbbt { | |
| uint32_t checksum; | |
| uint32_t fingerprint; | |
| uint32_t version; | |
| uint32_t number_bb; | |
| uint32_t number_2k_pages_bb; | |
| }; | |
| struct mx28_nand_bbt { | |
| uint32_t nand; | |
| uint32_t number_bb; | |
| uint32_t badblock[510]; | |
| }; | |
| struct mx28_sd_drive_info { | |
| uint32_t chip_num; | |
| uint32_t drive_type; | |
| uint32_t tag; | |
| uint32_t first_sector_number; | |
| uint32_t sector_count; | |
| }; | |
| struct mx28_sd_config_block { | |
| uint32_t signature; | |
| uint32_t primary_boot_tag; | |
| uint32_t secondary_boot_tag; | |
| uint32_t num_copies; | |
| struct mx28_sd_drive_info drv_info[1]; | |
| }; | |
| static inline uint32_t mx28_nand_ecc_size_in_bits(uint32_t ecc_strength) | |
| { | |
| return ecc_strength * 13; | |
| } | |
| static inline uint32_t mx28_nand_get_ecc_strength(uint32_t page_data_size, | |
| uint32_t page_oob_size) | |
| { | |
| if (page_data_size == 2048) | |
| return 8; | |
| if (page_data_size == 4096) { | |
| if (page_oob_size == 128) | |
| return 8; | |
| if (page_oob_size == 218) | |
| return 16; | |
| } | |
| return 0; | |
| } | |
| static inline uint32_t mx28_nand_get_mark_offset(uint32_t page_data_size, | |
| uint32_t ecc_strength) | |
| { | |
| uint32_t chunk_data_size_in_bits; | |
| uint32_t chunk_ecc_size_in_bits; | |
| uint32_t chunk_total_size_in_bits; | |
| uint32_t block_mark_chunk_number; | |
| uint32_t block_mark_chunk_bit_offset; | |
| uint32_t block_mark_bit_offset; | |
| chunk_data_size_in_bits = MXS_NAND_CHUNK_DATA_CHUNK_SIZE * 8; | |
| chunk_ecc_size_in_bits = mx28_nand_ecc_size_in_bits(ecc_strength); | |
| chunk_total_size_in_bits = | |
| chunk_data_size_in_bits + chunk_ecc_size_in_bits; | |
| /* Compute the bit offset of the block mark within the physical page. */ | |
| block_mark_bit_offset = page_data_size * 8; | |
| /* Subtract the metadata bits. */ | |
| block_mark_bit_offset -= MXS_NAND_METADATA_SIZE * 8; | |
| /* | |
| * Compute the chunk number (starting at zero) in which the block mark | |
| * appears. | |
| */ | |
| block_mark_chunk_number = | |
| block_mark_bit_offset / chunk_total_size_in_bits; | |
| /* | |
| * Compute the bit offset of the block mark within its chunk, and | |
| * validate it. | |
| */ | |
| block_mark_chunk_bit_offset = block_mark_bit_offset - | |
| (block_mark_chunk_number * chunk_total_size_in_bits); | |
| if (block_mark_chunk_bit_offset > chunk_data_size_in_bits) | |
| return 1; | |
| /* | |
| * Now that we know the chunk number in which the block mark appears, | |
| * we can subtract all the ECC bits that appear before it. | |
| */ | |
| block_mark_bit_offset -= | |
| block_mark_chunk_number * chunk_ecc_size_in_bits; | |
| return block_mark_bit_offset; | |
| } | |
| static inline uint32_t mx28_nand_mark_byte_offset(void) | |
| { | |
| uint32_t ecc_strength; | |
| ecc_strength = mx28_nand_get_ecc_strength(nand_writesize, nand_oobsize); | |
| return mx28_nand_get_mark_offset(nand_writesize, ecc_strength) >> 3; | |
| } | |
| static inline uint32_t mx28_nand_mark_bit_offset(void) | |
| { | |
| uint32_t ecc_strength; | |
| ecc_strength = mx28_nand_get_ecc_strength(nand_writesize, nand_oobsize); | |
| return mx28_nand_get_mark_offset(nand_writesize, ecc_strength) & 0x7; | |
| } | |
| static uint32_t mx28_nand_block_csum(uint8_t *block, uint32_t size) | |
| { | |
| uint32_t csum = 0; | |
| int i; | |
| for (i = 0; i < size; i++) | |
| csum += block[i]; | |
| return csum ^ 0xffffffff; | |
| } | |
| static struct mx28_nand_fcb *mx28_nand_get_fcb(uint32_t size) | |
| { | |
| struct mx28_nand_fcb *fcb; | |
| uint32_t bcb_size_bytes; | |
| uint32_t stride_size_bytes; | |
| uint32_t bootstream_size_pages; | |
| uint32_t fw1_start_page; | |
| uint32_t fw2_start_page; | |
| fcb = malloc(nand_writesize); | |
| if (!fcb) { | |
| printf("MX28 NAND: Unable to allocate FCB\n"); | |
| return NULL; | |
| } | |
| memset(fcb, 0, nand_writesize); | |
| fcb->fingerprint = 0x20424346; | |
| fcb->version = 0x01000000; | |
| /* | |
| * FIXME: These here are default values as found in kobs-ng. We should | |
| * probably retrieve the data from NAND or something. | |
| */ | |
| fcb->timing.data_setup = 80; | |
| fcb->timing.data_hold = 60; | |
| fcb->timing.address_setup = 25; | |
| fcb->timing.dsample_time = 6; | |
| fcb->page_data_size = nand_writesize; | |
| fcb->total_page_size = nand_writesize + nand_oobsize; | |
| fcb->sectors_per_block = nand_erasesize / nand_writesize; | |
| fcb->num_ecc_blocks_per_page = (nand_writesize / 512) - 1; | |
| fcb->ecc_block_0_size = 512; | |
| fcb->ecc_block_n_size = 512; | |
| fcb->metadata_bytes = 10; | |
| if (nand_writesize == 2048) { | |
| fcb->ecc_block_n_ecc_type = 4; | |
| fcb->ecc_block_0_ecc_type = 4; | |
| } else if (nand_writesize == 4096) { | |
| if (nand_oobsize == 128) { | |
| fcb->ecc_block_n_ecc_type = 4; | |
| fcb->ecc_block_0_ecc_type = 4; | |
| } else if (nand_oobsize == 218) { | |
| fcb->ecc_block_n_ecc_type = 8; | |
| fcb->ecc_block_0_ecc_type = 8; | |
| } | |
| } | |
| if (fcb->ecc_block_n_ecc_type == 0) { | |
| printf("MX28 NAND: Unsupported NAND geometry\n"); | |
| goto err; | |
| } | |
| fcb->boot_patch = 0; | |
| fcb->patch_sectors = 0; | |
| fcb->badblock_marker_byte = mx28_nand_mark_byte_offset(); | |
| fcb->badblock_marker_start_bit = mx28_nand_mark_bit_offset(); | |
| fcb->bb_marker_physical_offset = nand_writesize; | |
| stride_size_bytes = STRIDE_PAGES * nand_writesize; | |
| bcb_size_bytes = stride_size_bytes * STRIDE_COUNT; | |
| bootstream_size_pages = (size + (nand_writesize - 1)) / | |
| nand_writesize; | |
| fw1_start_page = 2 * bcb_size_bytes / nand_writesize; | |
| fw2_start_page = (2 * bcb_size_bytes + MAX_BOOTSTREAM_SIZE) / | |
| nand_writesize; | |
| fcb->firmware1_starting_sector = fw1_start_page; | |
| fcb->firmware2_starting_sector = fw2_start_page; | |
| fcb->sectors_in_firmware1 = bootstream_size_pages; | |
| fcb->sectors_in_firmware2 = bootstream_size_pages; | |
| fcb->dbbt_search_area_start_address = STRIDE_PAGES * STRIDE_COUNT; | |
| return fcb; | |
| err: | |
| free(fcb); | |
| return NULL; | |
| } | |
| static struct mx28_nand_dbbt *mx28_nand_get_dbbt(void) | |
| { | |
| struct mx28_nand_dbbt *dbbt; | |
| dbbt = malloc(nand_writesize); | |
| if (!dbbt) { | |
| printf("MX28 NAND: Unable to allocate DBBT\n"); | |
| return NULL; | |
| } | |
| memset(dbbt, 0, nand_writesize); | |
| dbbt->fingerprint = 0x54424244; | |
| dbbt->version = 0x1; | |
| return dbbt; | |
| } | |
| static inline uint8_t mx28_nand_parity_13_8(const uint8_t b) | |
| { | |
| uint32_t parity = 0, tmp; | |
| tmp = ((b >> 6) ^ (b >> 5) ^ (b >> 3) ^ (b >> 2)) & 1; | |
| parity |= tmp << 0; | |
| tmp = ((b >> 7) ^ (b >> 5) ^ (b >> 4) ^ (b >> 2) ^ (b >> 1)) & 1; | |
| parity |= tmp << 1; | |
| tmp = ((b >> 7) ^ (b >> 6) ^ (b >> 5) ^ (b >> 1) ^ (b >> 0)) & 1; | |
| parity |= tmp << 2; | |
| tmp = ((b >> 7) ^ (b >> 4) ^ (b >> 3) ^ (b >> 0)) & 1; | |
| parity |= tmp << 3; | |
| tmp = ((b >> 6) ^ (b >> 4) ^ (b >> 3) ^ | |
| (b >> 2) ^ (b >> 1) ^ (b >> 0)) & 1; | |
| parity |= tmp << 4; | |
| return parity; | |
| } | |
| static uint8_t *mx28_nand_fcb_block(struct mx28_nand_fcb *fcb) | |
| { | |
| uint8_t *block; | |
| uint8_t *ecc; | |
| int i; | |
| block = malloc(nand_writesize + nand_oobsize); | |
| if (!block) { | |
| printf("MX28 NAND: Unable to allocate FCB block\n"); | |
| return NULL; | |
| } | |
| memset(block, 0, nand_writesize + nand_oobsize); | |
| /* Update the FCB checksum */ | |
| fcb->checksum = mx28_nand_block_csum(((uint8_t *)fcb) + 4, 508); | |
| /* Figure 12-11. in iMX28RM, rev. 1, says FCB is at offset 12 */ | |
| memcpy(block + 12, fcb, sizeof(struct mx28_nand_fcb)); | |
| /* ECC is at offset 12 + 512 */ | |
| ecc = block + 12 + 512; | |
| /* Compute the ECC parity */ | |
| for (i = 0; i < sizeof(struct mx28_nand_fcb); i++) | |
| ecc[i] = mx28_nand_parity_13_8(block[i + 12]); | |
| return block; | |
| } | |
| static int mx28_nand_write_fcb(struct mx28_nand_fcb *fcb, uint8_t *buf) | |
| { | |
| uint32_t offset; | |
| uint8_t *fcbblock; | |
| int ret = 0; | |
| int i; | |
| fcbblock = mx28_nand_fcb_block(fcb); | |
| if (!fcbblock) | |
| return -1; | |
| for (i = 0; i < STRIDE_PAGES * STRIDE_COUNT; i += STRIDE_PAGES) { | |
| offset = i * nand_writesize; | |
| memcpy(buf + offset, fcbblock, nand_writesize + nand_oobsize); | |
| /* Mark the NAND page is OK. */ | |
| buf[offset + nand_writesize] = 0xff; | |
| } | |
| free(fcbblock); | |
| return ret; | |
| } | |
| static int mx28_nand_write_dbbt(struct mx28_nand_dbbt *dbbt, uint8_t *buf) | |
| { | |
| uint32_t offset; | |
| int i = STRIDE_PAGES * STRIDE_COUNT; | |
| for (; i < 2 * STRIDE_PAGES * STRIDE_COUNT; i += STRIDE_PAGES) { | |
| offset = i * nand_writesize; | |
| memcpy(buf + offset, dbbt, sizeof(struct mx28_nand_dbbt)); | |
| } | |
| return 0; | |
| } | |
| static int mx28_nand_write_firmware(struct mx28_nand_fcb *fcb, int infd, | |
| uint8_t *buf) | |
| { | |
| int ret; | |
| off_t size; | |
| uint32_t offset1, offset2; | |
| size = lseek(infd, 0, SEEK_END); | |
| lseek(infd, 0, SEEK_SET); | |
| offset1 = fcb->firmware1_starting_sector * nand_writesize; | |
| offset2 = fcb->firmware2_starting_sector * nand_writesize; | |
| ret = read(infd, buf + offset1, size); | |
| if (ret != size) | |
| return -1; | |
| memcpy(buf + offset2, buf + offset1, size); | |
| return 0; | |
| } | |
| static void usage(void) | |
| { | |
| printf( | |
| "Usage: mxsboot [ops] <type> <infile> <outfile>\n" | |
| "Augment BootStream file with a proper header for i.MX28 boot\n" | |
| "\n" | |
| " <type> type of image:\n" | |
| " \"nand\" for NAND image\n" | |
| " \"sd\" for SD image\n" | |
| " <infile> input file, the u-boot.sb bootstream\n" | |
| " <outfile> output file, the bootable image\n" | |
| "\n"); | |
| printf( | |
| "For NAND boot, these options are accepted:\n" | |
| " -w <size> NAND page size\n" | |
| " -o <size> NAND OOB size\n" | |
| " -e <size> NAND erase size\n" | |
| "\n" | |
| "For SD boot, these options are accepted:\n" | |
| " -p <sector> Sector where the SGTL partition starts\n" | |
| ); | |
| } | |
| static int mx28_create_nand_image(int infd, int outfd) | |
| { | |
| struct mx28_nand_fcb *fcb; | |
| struct mx28_nand_dbbt *dbbt; | |
| int ret = -1; | |
| uint8_t *buf; | |
| int size; | |
| ssize_t wr_size; | |
| size = nand_writesize * 512 + 2 * MAX_BOOTSTREAM_SIZE; | |
| buf = malloc(size); | |
| if (!buf) { | |
| printf("Can not allocate output buffer of %d bytes\n", size); | |
| goto err0; | |
| } | |
| memset(buf, 0, size); | |
| fcb = mx28_nand_get_fcb(MAX_BOOTSTREAM_SIZE); | |
| if (!fcb) { | |
| printf("Unable to compile FCB\n"); | |
| goto err1; | |
| } | |
| dbbt = mx28_nand_get_dbbt(); | |
| if (!dbbt) { | |
| printf("Unable to compile DBBT\n"); | |
| goto err2; | |
| } | |
| ret = mx28_nand_write_fcb(fcb, buf); | |
| if (ret) { | |
| printf("Unable to write FCB to buffer\n"); | |
| goto err3; | |
| } | |
| ret = mx28_nand_write_dbbt(dbbt, buf); | |
| if (ret) { | |
| printf("Unable to write DBBT to buffer\n"); | |
| goto err3; | |
| } | |
| ret = mx28_nand_write_firmware(fcb, infd, buf); | |
| if (ret) { | |
| printf("Unable to write firmware to buffer\n"); | |
| goto err3; | |
| } | |
| wr_size = write(outfd, buf, size); | |
| if (wr_size != size) { | |
| ret = -1; | |
| goto err3; | |
| } | |
| ret = 0; | |
| err3: | |
| free(dbbt); | |
| err2: | |
| free(fcb); | |
| err1: | |
| free(buf); | |
| err0: | |
| return ret; | |
| } | |
| static int mx28_create_sd_image(int infd, int outfd) | |
| { | |
| int ret = -1; | |
| uint32_t *buf; | |
| int size; | |
| off_t fsize; | |
| ssize_t wr_size; | |
| struct mx28_sd_config_block *cb; | |
| fsize = lseek(infd, 0, SEEK_END); | |
| lseek(infd, 0, SEEK_SET); | |
| size = fsize + 4 * 512; | |
| buf = malloc(size); | |
| if (!buf) { | |
| printf("Can not allocate output buffer of %d bytes\n", size); | |
| goto err0; | |
| } | |
| ret = read(infd, (uint8_t *)buf + 4 * 512, fsize); | |
| if (ret != fsize) { | |
| ret = -1; | |
| goto err1; | |
| } | |
| cb = (struct mx28_sd_config_block *)buf; | |
| cb->signature = 0x00112233; | |
| cb->primary_boot_tag = 0x1; | |
| cb->secondary_boot_tag = 0x1; | |
| cb->num_copies = 1; | |
| cb->drv_info[0].chip_num = 0x0; | |
| cb->drv_info[0].drive_type = 0x0; | |
| cb->drv_info[0].tag = 0x1; | |
| cb->drv_info[0].first_sector_number = sd_sector + 4; | |
| cb->drv_info[0].sector_count = (size - 4) / 512; | |
| wr_size = write(outfd, buf, size); | |
| if (wr_size != size) { | |
| ret = -1; | |
| goto err1; | |
| } | |
| ret = 0; | |
| err1: | |
| free(buf); | |
| err0: | |
| return ret; | |
| } | |
| static int parse_ops(int argc, char **argv) | |
| { | |
| int i; | |
| int tmp; | |
| char *end; | |
| enum param { | |
| PARAM_WRITE, | |
| PARAM_OOB, | |
| PARAM_ERASE, | |
| PARAM_PART, | |
| PARAM_SD, | |
| PARAM_NAND | |
| }; | |
| int type; | |
| if (argc < 4) | |
| return -1; | |
| for (i = 1; i < argc; i++) { | |
| if (!strncmp(argv[i], "-w", 2)) | |
| type = PARAM_WRITE; | |
| else if (!strncmp(argv[i], "-o", 2)) | |
| type = PARAM_OOB; | |
| else if (!strncmp(argv[i], "-e", 2)) | |
| type = PARAM_ERASE; | |
| else if (!strncmp(argv[i], "-p", 2)) | |
| type = PARAM_PART; | |
| else /* SD/MMC */ | |
| break; | |
| tmp = strtol(argv[++i], &end, 10); | |
| if (tmp % 2) | |
| return -1; | |
| if (tmp <= 0) | |
| return -1; | |
| if (type == PARAM_WRITE) | |
| nand_writesize = tmp; | |
| if (type == PARAM_OOB) | |
| nand_oobsize = tmp; | |
| if (type == PARAM_ERASE) | |
| nand_erasesize = tmp; | |
| if (type == PARAM_PART) | |
| sd_sector = tmp; | |
| } | |
| if (strcmp(argv[i], "sd") && strcmp(argv[i], "nand")) | |
| return -1; | |
| if (i + 3 != argc) | |
| return -1; | |
| return i; | |
| } | |
| int main(int argc, char **argv) | |
| { | |
| int infd, outfd; | |
| int ret = 0; | |
| int offset; | |
| offset = parse_ops(argc, argv); | |
| if (offset < 0) { | |
| usage(); | |
| ret = 1; | |
| goto err1; | |
| } | |
| infd = open(argv[offset + 1], O_RDONLY); | |
| if (infd < 0) { | |
| printf("Input BootStream file can not be opened\n"); | |
| ret = 2; | |
| goto err1; | |
| } | |
| outfd = open(argv[offset + 2], O_CREAT | O_TRUNC | O_WRONLY, | |
| S_IRUSR | S_IWUSR); | |
| if (outfd < 0) { | |
| printf("Output file can not be created\n"); | |
| ret = 3; | |
| goto err2; | |
| } | |
| if (!strcmp(argv[offset], "sd")) | |
| ret = mx28_create_sd_image(infd, outfd); | |
| else if (!strcmp(argv[offset], "nand")) | |
| ret = mx28_create_nand_image(infd, outfd); | |
| close(outfd); | |
| err2: | |
| close(infd); | |
| err1: | |
| return ret; | |
| } |