| /* | |
| * PXA LCD Controller | |
| * | |
| * (C) Copyright 2001-2002 | |
| * Wolfgang Denk, DENX Software Engineering -- wd@denx.de | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| /************************************************************************/ | |
| /* ** HEADER FILES */ | |
| /************************************************************************/ | |
| #include <config.h> | |
| #include <common.h> | |
| #include <version.h> | |
| #include <stdarg.h> | |
| #include <linux/types.h> | |
| #include <devices.h> | |
| #include <lcd.h> | |
| #include <asm/arch/pxa-regs.h> | |
| /* #define DEBUG */ | |
| #ifdef CONFIG_LCD | |
| /*----------------------------------------------------------------------*/ | |
| /* | |
| * Define panel bpp, LCCR0, LCCR3 and panel_info video struct for | |
| * your display. | |
| */ | |
| #ifdef CONFIG_PXA_VGA | |
| /* LCD outputs connected to a video DAC */ | |
| # define LCD_BPP LCD_COLOR8 | |
| /* you have to set lccr0 and lccr3 (including pcd) */ | |
| # define REG_LCCR0 0x003008f8 | |
| # define REG_LCCR3 0x0300FF01 | |
| /* 640x480x16 @ 61 Hz */ | |
| vidinfo_t panel_info = { | |
| vl_col: 640, | |
| vl_row: 480, | |
| vl_width: 640, | |
| vl_height: 480, | |
| vl_clkp: CONFIG_SYS_HIGH, | |
| vl_oep: CONFIG_SYS_HIGH, | |
| vl_hsp: CONFIG_SYS_HIGH, | |
| vl_vsp: CONFIG_SYS_HIGH, | |
| vl_dp: CONFIG_SYS_HIGH, | |
| vl_bpix: LCD_BPP, | |
| vl_lbw: 0, | |
| vl_splt: 0, | |
| vl_clor: 0, | |
| vl_tft: 1, | |
| vl_hpw: 40, | |
| vl_blw: 56, | |
| vl_elw: 56, | |
| vl_vpw: 20, | |
| vl_bfw: 8, | |
| vl_efw: 8, | |
| }; | |
| #endif /* CONFIG_PXA_VIDEO */ | |
| /*----------------------------------------------------------------------*/ | |
| #ifdef CONFIG_SHARP_LM8V31 | |
| # define LCD_BPP LCD_COLOR8 | |
| # define LCD_INVERT_COLORS /* Needed for colors to be correct, but why? */ | |
| /* you have to set lccr0 and lccr3 (including pcd) */ | |
| # define REG_LCCR0 0x0030087C | |
| # define REG_LCCR3 0x0340FF08 | |
| vidinfo_t panel_info = { | |
| vl_col: 640, | |
| vl_row: 480, | |
| vl_width: 157, | |
| vl_height: 118, | |
| vl_clkp: CONFIG_SYS_HIGH, | |
| vl_oep: CONFIG_SYS_HIGH, | |
| vl_hsp: CONFIG_SYS_HIGH, | |
| vl_vsp: CONFIG_SYS_HIGH, | |
| vl_dp: CONFIG_SYS_HIGH, | |
| vl_bpix: LCD_BPP, | |
| vl_lbw: 0, | |
| vl_splt: 1, | |
| vl_clor: 1, | |
| vl_tft: 0, | |
| vl_hpw: 1, | |
| vl_blw: 3, | |
| vl_elw: 3, | |
| vl_vpw: 1, | |
| vl_bfw: 0, | |
| vl_efw: 0, | |
| }; | |
| #endif /* CONFIG_SHARP_LM8V31 */ | |
| /*----------------------------------------------------------------------*/ | |
| #ifdef CONFIG_HITACHI_SX14 | |
| /* Hitachi SX14Q004-ZZA color STN LCD */ | |
| #define LCD_BPP LCD_COLOR8 | |
| /* you have to set lccr0 and lccr3 (including pcd) */ | |
| #define REG_LCCR0 0x00301079 | |
| #define REG_LCCR3 0x0340FF20 | |
| vidinfo_t panel_info = { | |
| vl_col: 320, | |
| vl_row: 240, | |
| vl_width: 167, | |
| vl_height: 109, | |
| vl_clkp: CONFIG_SYS_HIGH, | |
| vl_oep: CONFIG_SYS_HIGH, | |
| vl_hsp: CONFIG_SYS_HIGH, | |
| vl_vsp: CONFIG_SYS_HIGH, | |
| vl_dp: CONFIG_SYS_HIGH, | |
| vl_bpix: LCD_BPP, | |
| vl_lbw: 1, | |
| vl_splt: 0, | |
| vl_clor: 1, | |
| vl_tft: 0, | |
| vl_hpw: 1, | |
| vl_blw: 1, | |
| vl_elw: 1, | |
| vl_vpw: 7, | |
| vl_bfw: 0, | |
| vl_efw: 0, | |
| }; | |
| #endif /* CONFIG_HITACHI_SX14 */ | |
| /*----------------------------------------------------------------------*/ | |
| #if LCD_BPP == LCD_COLOR8 | |
| void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue); | |
| #endif | |
| #if LCD_BPP == LCD_MONOCHROME | |
| void lcd_initcolregs (void); | |
| #endif | |
| #ifdef NOT_USED_SO_FAR | |
| void lcd_disable (void); | |
| void lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue); | |
| #endif /* NOT_USED_SO_FAR */ | |
| void lcd_ctrl_init (void *lcdbase); | |
| void lcd_enable (void); | |
| int lcd_line_length; | |
| int lcd_color_fg; | |
| int lcd_color_bg; | |
| void *lcd_base; /* Start of framebuffer memory */ | |
| void *lcd_console_address; /* Start of console buffer */ | |
| short console_col; | |
| short console_row; | |
| static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid); | |
| static void pxafb_setup_gpio (vidinfo_t *vid); | |
| static void pxafb_enable_controller (vidinfo_t *vid); | |
| static int pxafb_init (vidinfo_t *vid); | |
| /************************************************************************/ | |
| /************************************************************************/ | |
| /* --------------- PXA chipset specific functions ------------------- */ | |
| /************************************************************************/ | |
| void lcd_ctrl_init (void *lcdbase) | |
| { | |
| pxafb_init_mem(lcdbase, &panel_info); | |
| pxafb_init(&panel_info); | |
| pxafb_setup_gpio(&panel_info); | |
| pxafb_enable_controller(&panel_info); | |
| } | |
| /*----------------------------------------------------------------------*/ | |
| #ifdef NOT_USED_SO_FAR | |
| void | |
| lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue) | |
| { | |
| } | |
| #endif /* NOT_USED_SO_FAR */ | |
| /*----------------------------------------------------------------------*/ | |
| #if LCD_BPP == LCD_COLOR8 | |
| void | |
| lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue) | |
| { | |
| struct pxafb_info *fbi = &panel_info.pxa; | |
| unsigned short *palette = (unsigned short *)fbi->palette; | |
| u_int val; | |
| if (regno < fbi->palette_size) { | |
| val = ((red << 8) & 0xf800); | |
| val |= ((green << 4) & 0x07e0); | |
| val |= (blue & 0x001f); | |
| #ifdef LCD_INVERT_COLORS | |
| palette[regno] = ~val; | |
| #else | |
| palette[regno] = val; | |
| #endif | |
| } | |
| debug ("setcolreg: reg %2d @ %p: R=%02X G=%02X B=%02X => %04X\n", | |
| regno, &palette[regno], | |
| red, green, blue, | |
| palette[regno]); | |
| } | |
| #endif /* LCD_COLOR8 */ | |
| /*----------------------------------------------------------------------*/ | |
| #if LCD_BPP == LCD_MONOCHROME | |
| void lcd_initcolregs (void) | |
| { | |
| struct pxafb_info *fbi = &panel_info.pxa; | |
| cmap = (ushort *)fbi->palette; | |
| ushort regno; | |
| for (regno = 0; regno < 16; regno++) { | |
| cmap[regno * 2] = 0; | |
| cmap[(regno * 2) + 1] = regno & 0x0f; | |
| } | |
| } | |
| #endif /* LCD_MONOCHROME */ | |
| /*----------------------------------------------------------------------*/ | |
| void lcd_enable (void) | |
| { | |
| } | |
| /*----------------------------------------------------------------------*/ | |
| #ifdef NOT_USED_SO_FAR | |
| static void lcd_disable (void) | |
| { | |
| } | |
| #endif /* NOT_USED_SO_FAR */ | |
| /*----------------------------------------------------------------------*/ | |
| /************************************************************************/ | |
| /* ** PXA255 specific routines */ | |
| /************************************************************************/ | |
| /* | |
| * Calculate fb size for VIDEOLFB_ATAG. Size returned contains fb, | |
| * descriptors and palette areas. | |
| */ | |
| ulong calc_fbsize (void) | |
| { | |
| ulong size; | |
| int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8; | |
| size = line_length * panel_info.vl_row; | |
| size += PAGE_SIZE; | |
| return size; | |
| } | |
| static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid) | |
| { | |
| u_long palette_mem_size; | |
| struct pxafb_info *fbi = &vid->pxa; | |
| int fb_size = vid->vl_row * (vid->vl_col * NBITS (vid->vl_bpix)) / 8; | |
| fbi->screen = (u_long)lcdbase; | |
| fbi->palette_size = NBITS(vid->vl_bpix) == 8 ? 256 : 16; | |
| palette_mem_size = fbi->palette_size * sizeof(u16); | |
| debug("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size); | |
| /* locate palette and descs at end of page following fb */ | |
| fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size; | |
| return 0; | |
| } | |
| static void pxafb_setup_gpio (vidinfo_t *vid) | |
| { | |
| u_long lccr0; | |
| /* | |
| * setup is based on type of panel supported | |
| */ | |
| lccr0 = vid->pxa.reg_lccr0; | |
| /* 4 bit interface */ | |
| if ((lccr0 & LCCR0_CMS) && (lccr0 & LCCR0_SDS) && !(lccr0 & LCCR0_DPD)) | |
| { | |
| debug("Setting GPIO for 4 bit data\n"); | |
| /* bits 58-61 */ | |
| GPDR1 |= (0xf << 26); | |
| GAFR1_U = (GAFR1_U & ~(0xff << 20)) | (0xaa << 20); | |
| /* bits 74-77 */ | |
| GPDR2 |= (0xf << 10); | |
| GAFR2_L = (GAFR2_L & ~(0xff << 20)) | (0xaa << 20); | |
| } | |
| /* 8 bit interface */ | |
| else if (((lccr0 & LCCR0_CMS) && ((lccr0 & LCCR0_SDS) || (lccr0 & LCCR0_DPD))) || | |
| (!(lccr0 & LCCR0_CMS) && !(lccr0 & LCCR0_PAS) && !(lccr0 & LCCR0_SDS))) | |
| { | |
| debug("Setting GPIO for 8 bit data\n"); | |
| /* bits 58-65 */ | |
| GPDR1 |= (0x3f << 26); | |
| GPDR2 |= (0x3); | |
| GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20); | |
| GAFR2_L = (GAFR2_L & ~0xf) | (0xa); | |
| /* bits 74-77 */ | |
| GPDR2 |= (0xf << 10); | |
| GAFR2_L = (GAFR2_L & ~(0xff << 20)) | (0xaa << 20); | |
| } | |
| /* 16 bit interface */ | |
| else if (!(lccr0 & LCCR0_CMS) && ((lccr0 & LCCR0_SDS) || (lccr0 & LCCR0_PAS))) | |
| { | |
| debug("Setting GPIO for 16 bit data\n"); | |
| /* bits 58-77 */ | |
| GPDR1 |= (0x3f << 26); | |
| GPDR2 |= 0x00003fff; | |
| GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20); | |
| GAFR2_L = (GAFR2_L & 0xf0000000) | 0x0aaaaaaa; | |
| } | |
| else | |
| { | |
| printf("pxafb_setup_gpio: unable to determine bits per pixel\n"); | |
| } | |
| } | |
| static void pxafb_enable_controller (vidinfo_t *vid) | |
| { | |
| debug("Enabling LCD controller\n"); | |
| /* Sequence from 11.7.10 */ | |
| LCCR3 = vid->pxa.reg_lccr3; | |
| LCCR2 = vid->pxa.reg_lccr2; | |
| LCCR1 = vid->pxa.reg_lccr1; | |
| LCCR0 = vid->pxa.reg_lccr0 & ~LCCR0_ENB; | |
| FDADR0 = vid->pxa.fdadr0; | |
| FDADR1 = vid->pxa.fdadr1; | |
| LCCR0 |= LCCR0_ENB; | |
| CKEN |= CKEN16_LCD; | |
| debug("FDADR0 = 0x%08x\n", (unsigned int)FDADR0); | |
| debug("FDADR1 = 0x%08x\n", (unsigned int)FDADR1); | |
| debug("LCCR0 = 0x%08x\n", (unsigned int)LCCR0); | |
| debug("LCCR1 = 0x%08x\n", (unsigned int)LCCR1); | |
| debug("LCCR2 = 0x%08x\n", (unsigned int)LCCR2); | |
| debug("LCCR3 = 0x%08x\n", (unsigned int)LCCR3); | |
| } | |
| static int pxafb_init (vidinfo_t *vid) | |
| { | |
| struct pxafb_info *fbi = &vid->pxa; | |
| debug("Configuring PXA LCD\n"); | |
| fbi->reg_lccr0 = REG_LCCR0; | |
| fbi->reg_lccr3 = REG_LCCR3; | |
| debug("vid: vl_col=%d hslen=%d lm=%d rm=%d\n", | |
| vid->vl_col, vid->vl_hpw, | |
| vid->vl_blw, vid->vl_elw); | |
| debug("vid: vl_row=%d vslen=%d um=%d bm=%d\n", | |
| vid->vl_row, vid->vl_vpw, | |
| vid->vl_bfw, vid->vl_efw); | |
| fbi->reg_lccr1 = | |
| LCCR1_DisWdth(vid->vl_col) + | |
| LCCR1_HorSnchWdth(vid->vl_hpw) + | |
| LCCR1_BegLnDel(vid->vl_blw) + | |
| LCCR1_EndLnDel(vid->vl_elw); | |
| fbi->reg_lccr2 = | |
| LCCR2_DisHght(vid->vl_row) + | |
| LCCR2_VrtSnchWdth(vid->vl_vpw) + | |
| LCCR2_BegFrmDel(vid->vl_bfw) + | |
| LCCR2_EndFrmDel(vid->vl_efw); | |
| fbi->reg_lccr3 = REG_LCCR3 & ~(LCCR3_HSP | LCCR3_VSP); | |
| fbi->reg_lccr3 |= (vid->vl_hsp ? LCCR3_HorSnchL : LCCR3_HorSnchH) | |
| | (vid->vl_vsp ? LCCR3_VrtSnchL : LCCR3_VrtSnchH); | |
| /* setup dma descriptors */ | |
| fbi->dmadesc_fblow = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 3*16); | |
| fbi->dmadesc_fbhigh = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 2*16); | |
| fbi->dmadesc_palette = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 1*16); | |
| #define BYTES_PER_PANEL ((fbi->reg_lccr0 & LCCR0_SDS) ? \ | |
| (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8 / 2) : \ | |
| (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8)) | |
| /* populate descriptors */ | |
| fbi->dmadesc_fblow->fdadr = (u_long)fbi->dmadesc_fblow; | |
| fbi->dmadesc_fblow->fsadr = fbi->screen + BYTES_PER_PANEL; | |
| fbi->dmadesc_fblow->fidr = 0; | |
| fbi->dmadesc_fblow->ldcmd = BYTES_PER_PANEL; | |
| fbi->fdadr1 = (u_long)fbi->dmadesc_fblow; /* only used in dual-panel mode */ | |
| fbi->dmadesc_fbhigh->fsadr = fbi->screen; | |
| fbi->dmadesc_fbhigh->fidr = 0; | |
| fbi->dmadesc_fbhigh->ldcmd = BYTES_PER_PANEL; | |
| fbi->dmadesc_palette->fsadr = fbi->palette; | |
| fbi->dmadesc_palette->fidr = 0; | |
| fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2) | LDCMD_PAL; | |
| if( NBITS(vid->vl_bpix) < 12) | |
| { | |
| /* assume any mode with <12 bpp is palette driven */ | |
| fbi->dmadesc_palette->fdadr = (u_long)fbi->dmadesc_fbhigh; | |
| fbi->dmadesc_fbhigh->fdadr = (u_long)fbi->dmadesc_palette; | |
| /* flips back and forth between pal and fbhigh */ | |
| fbi->fdadr0 = (u_long)fbi->dmadesc_palette; | |
| } | |
| else | |
| { | |
| /* palette shouldn't be loaded in true-color mode */ | |
| fbi->dmadesc_fbhigh->fdadr = (u_long)fbi->dmadesc_fbhigh; | |
| fbi->fdadr0 = (u_long)fbi->dmadesc_fbhigh; /* no pal just fbhigh */ | |
| } | |
| debug("fbi->dmadesc_fblow = 0x%lx\n", (u_long)fbi->dmadesc_fblow); | |
| debug("fbi->dmadesc_fbhigh = 0x%lx\n", (u_long)fbi->dmadesc_fbhigh); | |
| debug("fbi->dmadesc_palette = 0x%lx\n", (u_long)fbi->dmadesc_palette); | |
| debug("fbi->dmadesc_fblow->fdadr = 0x%lx\n", fbi->dmadesc_fblow->fdadr); | |
| debug("fbi->dmadesc_fbhigh->fdadr = 0x%lx\n", fbi->dmadesc_fbhigh->fdadr); | |
| debug("fbi->dmadesc_palette->fdadr = 0x%lx\n", fbi->dmadesc_palette->fdadr); | |
| debug("fbi->dmadesc_fblow->fsadr = 0x%lx\n", fbi->dmadesc_fblow->fsadr); | |
| debug("fbi->dmadesc_fbhigh->fsadr = 0x%lx\n", fbi->dmadesc_fbhigh->fsadr); | |
| debug("fbi->dmadesc_palette->fsadr = 0x%lx\n", fbi->dmadesc_palette->fsadr); | |
| debug("fbi->dmadesc_fblow->ldcmd = 0x%lx\n", fbi->dmadesc_fblow->ldcmd); | |
| debug("fbi->dmadesc_fbhigh->ldcmd = 0x%lx\n", fbi->dmadesc_fbhigh->ldcmd); | |
| debug("fbi->dmadesc_palette->ldcmd = 0x%lx\n", fbi->dmadesc_palette->ldcmd); | |
| return 0; | |
| } | |
| /************************************************************************/ | |
| /************************************************************************/ | |
| #endif /* CONFIG_LCD */ |