|  | /* | 
|  | * sh.c -- a prototype Bourne shell grammar parser | 
|  | *      Intended to follow the original Thompson and Ritchie | 
|  | *      "small and simple is beautiful" philosophy, which | 
|  | *      incidentally is a good match to today's BusyBox. | 
|  | * | 
|  | * Copyright (C) 2000,2001  Larry Doolittle  <larry@doolittle.boa.org> | 
|  | * | 
|  | * Credits: | 
|  | *      The parser routines proper are all original material, first | 
|  | *      written Dec 2000 and Jan 2001 by Larry Doolittle. | 
|  | *      The execution engine, the builtins, and much of the underlying | 
|  | *      support has been adapted from busybox-0.49pre's lash, | 
|  | *      which is Copyright (C) 2000 by Lineo, Inc., and | 
|  | *      written by Erik Andersen <andersen@lineo.com>, <andersee@debian.org>. | 
|  | *      That, in turn, is based in part on ladsh.c, by Michael K. Johnson and | 
|  | *      Erik W. Troan, which they placed in the public domain.  I don't know | 
|  | *      how much of the Johnson/Troan code has survived the repeated rewrites. | 
|  | * Other credits: | 
|  | *      simple_itoa() was lifted from boa-0.93.15 | 
|  | *      b_addchr() derived from similar w_addchar function in glibc-2.2 | 
|  | *      setup_redirect(), redirect_opt_num(), and big chunks of main() | 
|  | *        and many builtins derived from contributions by Erik Andersen | 
|  | *      miscellaneous bugfixes from Matt Kraai | 
|  | * | 
|  | * There are two big (and related) architecture differences between | 
|  | * this parser and the lash parser.  One is that this version is | 
|  | * actually designed from the ground up to understand nearly all | 
|  | * of the Bourne grammar.  The second, consequential change is that | 
|  | * the parser and input reader have been turned inside out.  Now, | 
|  | * the parser is in control, and asks for input as needed.  The old | 
|  | * way had the input reader in control, and it asked for parsing to | 
|  | * take place as needed.  The new way makes it much easier to properly | 
|  | * handle the recursion implicit in the various substitutions, especially | 
|  | * across continuation lines. | 
|  | * | 
|  | * Bash grammar not implemented: (how many of these were in original sh?) | 
|  | *      $@ (those sure look like weird quoting rules) | 
|  | *      $_ | 
|  | *      ! negation operator for pipes | 
|  | *      &> and >& redirection of stdout+stderr | 
|  | *      Brace Expansion | 
|  | *      Tilde Expansion | 
|  | *      fancy forms of Parameter Expansion | 
|  | *      aliases | 
|  | *      Arithmetic Expansion | 
|  | *      <(list) and >(list) Process Substitution | 
|  | *      reserved words: case, esac, select, function | 
|  | *      Here Documents ( << word ) | 
|  | *      Functions | 
|  | * Major bugs: | 
|  | *      job handling woefully incomplete and buggy | 
|  | *      reserved word execution woefully incomplete and buggy | 
|  | * to-do: | 
|  | *      port selected bugfixes from post-0.49 busybox lash - done? | 
|  | *      finish implementing reserved words: for, while, until, do, done | 
|  | *      change { and } from special chars to reserved words | 
|  | *      builtins: break, continue, eval, return, set, trap, ulimit | 
|  | *      test magic exec | 
|  | *      handle children going into background | 
|  | *      clean up recognition of null pipes | 
|  | *      check setting of global_argc and global_argv | 
|  | *      control-C handling, probably with longjmp | 
|  | *      follow IFS rules more precisely, including update semantics | 
|  | *      figure out what to do with backslash-newline | 
|  | *      explain why we use signal instead of sigaction | 
|  | *      propagate syntax errors, die on resource errors? | 
|  | *      continuation lines, both explicit and implicit - done? | 
|  | *      memory leak finding and plugging - done? | 
|  | *      more testing, especially quoting rules and redirection | 
|  | *      document how quoting rules not precisely followed for variable assignments | 
|  | *      maybe change map[] to use 2-bit entries | 
|  | *      (eventually) remove all the printf's | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | 
|  | */ | 
|  | #define __U_BOOT__ | 
|  | #ifdef __U_BOOT__ | 
|  | #include <malloc.h>         /* malloc, free, realloc*/ | 
|  | #include <linux/ctype.h>    /* isalpha, isdigit */ | 
|  | #include <common.h>        /* readline */ | 
|  | #include <hush.h> | 
|  | #include <command.h>        /* find_cmd */ | 
|  | #endif | 
|  | #ifndef __U_BOOT__ | 
|  | #include <ctype.h>     /* isalpha, isdigit */ | 
|  | #include <unistd.h>    /* getpid */ | 
|  | #include <stdlib.h>    /* getenv, atoi */ | 
|  | #include <string.h>    /* strchr */ | 
|  | #include <stdio.h>     /* popen etc. */ | 
|  | #include <glob.h>      /* glob, of course */ | 
|  | #include <stdarg.h>    /* va_list */ | 
|  | #include <errno.h> | 
|  | #include <fcntl.h> | 
|  | #include <getopt.h>    /* should be pretty obvious */ | 
|  |  | 
|  | #include <sys/stat.h>  /* ulimit */ | 
|  | #include <sys/types.h> | 
|  | #include <sys/wait.h> | 
|  | #include <signal.h> | 
|  |  | 
|  | /* #include <dmalloc.h> */ | 
|  |  | 
|  | #if 1 | 
|  | #include "busybox.h" | 
|  | #include "cmdedit.h" | 
|  | #else | 
|  | #define applet_name "hush" | 
|  | #include "standalone.h" | 
|  | #define hush_main main | 
|  | #undef CONFIG_FEATURE_SH_FANCY_PROMPT | 
|  | #define BB_BANNER | 
|  | #endif | 
|  | #endif | 
|  | #define SPECIAL_VAR_SYMBOL 03 | 
|  | #ifndef __U_BOOT__ | 
|  | #define FLAG_EXIT_FROM_LOOP 1 | 
|  | #define FLAG_PARSE_SEMICOLON (1 << 1)		/* symbol ';' is special for parser */ | 
|  | #define FLAG_REPARSING       (1 << 2)		/* >= 2nd pass */ | 
|  |  | 
|  | #endif | 
|  |  | 
|  | #ifdef __U_BOOT__ | 
|  | DECLARE_GLOBAL_DATA_PTR; | 
|  |  | 
|  | #define EXIT_SUCCESS 0 | 
|  | #define EOF -1 | 
|  | #define syntax() syntax_err() | 
|  | #define xstrdup strdup | 
|  | #define error_msg printf | 
|  | #else | 
|  | typedef enum { | 
|  | REDIRECT_INPUT     = 1, | 
|  | REDIRECT_OVERWRITE = 2, | 
|  | REDIRECT_APPEND    = 3, | 
|  | REDIRECT_HEREIS    = 4, | 
|  | REDIRECT_IO        = 5 | 
|  | } redir_type; | 
|  |  | 
|  | /* The descrip member of this structure is only used to make debugging | 
|  | * output pretty */ | 
|  | struct {int mode; int default_fd; char *descrip;} redir_table[] = { | 
|  | { 0,                         0, "()" }, | 
|  | { O_RDONLY,                  0, "<"  }, | 
|  | { O_CREAT|O_TRUNC|O_WRONLY,  1, ">"  }, | 
|  | { O_CREAT|O_APPEND|O_WRONLY, 1, ">>" }, | 
|  | { O_RDONLY,                 -1, "<<" }, | 
|  | { O_RDWR,                    1, "<>" } | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | typedef enum { | 
|  | PIPE_SEQ = 1, | 
|  | PIPE_AND = 2, | 
|  | PIPE_OR  = 3, | 
|  | PIPE_BG  = 4, | 
|  | } pipe_style; | 
|  |  | 
|  | /* might eventually control execution */ | 
|  | typedef enum { | 
|  | RES_NONE  = 0, | 
|  | RES_IF    = 1, | 
|  | RES_THEN  = 2, | 
|  | RES_ELIF  = 3, | 
|  | RES_ELSE  = 4, | 
|  | RES_FI    = 5, | 
|  | RES_FOR   = 6, | 
|  | RES_WHILE = 7, | 
|  | RES_UNTIL = 8, | 
|  | RES_DO    = 9, | 
|  | RES_DONE  = 10, | 
|  | RES_XXXX  = 11, | 
|  | RES_IN    = 12, | 
|  | RES_SNTX  = 13 | 
|  | } reserved_style; | 
|  | #define FLAG_END   (1<<RES_NONE) | 
|  | #define FLAG_IF    (1<<RES_IF) | 
|  | #define FLAG_THEN  (1<<RES_THEN) | 
|  | #define FLAG_ELIF  (1<<RES_ELIF) | 
|  | #define FLAG_ELSE  (1<<RES_ELSE) | 
|  | #define FLAG_FI    (1<<RES_FI) | 
|  | #define FLAG_FOR   (1<<RES_FOR) | 
|  | #define FLAG_WHILE (1<<RES_WHILE) | 
|  | #define FLAG_UNTIL (1<<RES_UNTIL) | 
|  | #define FLAG_DO    (1<<RES_DO) | 
|  | #define FLAG_DONE  (1<<RES_DONE) | 
|  | #define FLAG_IN    (1<<RES_IN) | 
|  | #define FLAG_START (1<<RES_XXXX) | 
|  |  | 
|  | /* This holds pointers to the various results of parsing */ | 
|  | struct p_context { | 
|  | struct child_prog *child; | 
|  | struct pipe *list_head; | 
|  | struct pipe *pipe; | 
|  | #ifndef __U_BOOT__ | 
|  | struct redir_struct *pending_redirect; | 
|  | #endif | 
|  | reserved_style w; | 
|  | int old_flag;				/* for figuring out valid reserved words */ | 
|  | struct p_context *stack; | 
|  | int type;			/* define type of parser : ";$" common or special symbol */ | 
|  | /* How about quoting status? */ | 
|  | }; | 
|  |  | 
|  | #ifndef __U_BOOT__ | 
|  | struct redir_struct { | 
|  | redir_type type;			/* type of redirection */ | 
|  | int fd;						/* file descriptor being redirected */ | 
|  | int dup;					/* -1, or file descriptor being duplicated */ | 
|  | struct redir_struct *next;	/* pointer to the next redirect in the list */ | 
|  | glob_t word;				/* *word.gl_pathv is the filename */ | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | struct child_prog { | 
|  | #ifndef __U_BOOT__ | 
|  | pid_t pid;					/* 0 if exited */ | 
|  | #endif | 
|  | char **argv;				/* program name and arguments */ | 
|  | #ifdef __U_BOOT__ | 
|  | int    argc;                            /* number of program arguments */ | 
|  | #endif | 
|  | struct pipe *group;			/* if non-NULL, first in group or subshell */ | 
|  | #ifndef __U_BOOT__ | 
|  | int subshell;				/* flag, non-zero if group must be forked */ | 
|  | struct redir_struct *redirects;	/* I/O redirections */ | 
|  | glob_t glob_result;			/* result of parameter globbing */ | 
|  | int is_stopped;				/* is the program currently running? */ | 
|  | struct pipe *family;		/* pointer back to the child's parent pipe */ | 
|  | #endif | 
|  | int sp;				/* number of SPECIAL_VAR_SYMBOL */ | 
|  | int type; | 
|  | }; | 
|  |  | 
|  | struct pipe { | 
|  | #ifndef __U_BOOT__ | 
|  | int jobid;					/* job number */ | 
|  | #endif | 
|  | int num_progs;				/* total number of programs in job */ | 
|  | #ifndef __U_BOOT__ | 
|  | int running_progs;			/* number of programs running */ | 
|  | char *text;					/* name of job */ | 
|  | char *cmdbuf;				/* buffer various argv's point into */ | 
|  | pid_t pgrp;					/* process group ID for the job */ | 
|  | #endif | 
|  | struct child_prog *progs;	/* array of commands in pipe */ | 
|  | struct pipe *next;			/* to track background commands */ | 
|  | #ifndef __U_BOOT__ | 
|  | int stopped_progs;			/* number of programs alive, but stopped */ | 
|  | int job_context;			/* bitmask defining current context */ | 
|  | #endif | 
|  | pipe_style followup;		/* PIPE_BG, PIPE_SEQ, PIPE_OR, PIPE_AND */ | 
|  | reserved_style r_mode;		/* supports if, for, while, until */ | 
|  | }; | 
|  |  | 
|  | #ifndef __U_BOOT__ | 
|  | struct close_me { | 
|  | int fd; | 
|  | struct close_me *next; | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | struct variables { | 
|  | char *name; | 
|  | char *value; | 
|  | int flg_export; | 
|  | int flg_read_only; | 
|  | struct variables *next; | 
|  | }; | 
|  |  | 
|  | /* globals, connect us to the outside world | 
|  | * the first three support $?, $#, and $1 */ | 
|  | #ifndef __U_BOOT__ | 
|  | char **global_argv; | 
|  | unsigned int global_argc; | 
|  | #endif | 
|  | unsigned int last_return_code; | 
|  | int nesting_level; | 
|  | #ifndef __U_BOOT__ | 
|  | extern char **environ; /* This is in <unistd.h>, but protected with __USE_GNU */ | 
|  | #endif | 
|  |  | 
|  | /* "globals" within this file */ | 
|  | static uchar *ifs; | 
|  | static char map[256]; | 
|  | #ifndef __U_BOOT__ | 
|  | static int fake_mode; | 
|  | static int interactive; | 
|  | static struct close_me *close_me_head; | 
|  | static const char *cwd; | 
|  | static struct pipe *job_list; | 
|  | static unsigned int last_bg_pid; | 
|  | static unsigned int last_jobid; | 
|  | static unsigned int shell_terminal; | 
|  | static char *PS1; | 
|  | static char *PS2; | 
|  | struct variables shell_ver = { "HUSH_VERSION", "0.01", 1, 1, 0 }; | 
|  | struct variables *top_vars = &shell_ver; | 
|  | #else | 
|  | static int flag_repeat = 0; | 
|  | static int do_repeat = 0; | 
|  | static struct variables *top_vars = NULL ; | 
|  | #endif /*__U_BOOT__ */ | 
|  |  | 
|  | #define B_CHUNK (100) | 
|  | #define B_NOSPAC 1 | 
|  |  | 
|  | typedef struct { | 
|  | char *data; | 
|  | int length; | 
|  | int maxlen; | 
|  | int quote; | 
|  | int nonnull; | 
|  | } o_string; | 
|  | #define NULL_O_STRING {NULL,0,0,0,0} | 
|  | /* used for initialization: | 
|  | o_string foo = NULL_O_STRING; */ | 
|  |  | 
|  | /* I can almost use ordinary FILE *.  Is open_memstream() universally | 
|  | * available?  Where is it documented? */ | 
|  | struct in_str { | 
|  | const char *p; | 
|  | #ifndef __U_BOOT__ | 
|  | char peek_buf[2]; | 
|  | #endif | 
|  | int __promptme; | 
|  | int promptmode; | 
|  | #ifndef __U_BOOT__ | 
|  | FILE *file; | 
|  | #endif | 
|  | int (*get) (struct in_str *); | 
|  | int (*peek) (struct in_str *); | 
|  | }; | 
|  | #define b_getch(input) ((input)->get(input)) | 
|  | #define b_peek(input) ((input)->peek(input)) | 
|  |  | 
|  | #ifndef __U_BOOT__ | 
|  | #define JOB_STATUS_FORMAT "[%d] %-22s %.40s\n" | 
|  |  | 
|  | struct built_in_command { | 
|  | char *cmd;					/* name */ | 
|  | char *descr;				/* description */ | 
|  | int (*function) (struct child_prog *);	/* function ptr */ | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | /* define DEBUG_SHELL for debugging output (obviously ;-)) */ | 
|  | #if 0 | 
|  | #define DEBUG_SHELL | 
|  | #endif | 
|  |  | 
|  | /* This should be in utility.c */ | 
|  | #ifdef DEBUG_SHELL | 
|  | #ifndef __U_BOOT__ | 
|  | static void debug_printf(const char *format, ...) | 
|  | { | 
|  | va_list args; | 
|  | va_start(args, format); | 
|  | vfprintf(stderr, format, args); | 
|  | va_end(args); | 
|  | } | 
|  | #else | 
|  | #define debug_printf(fmt,args...)	printf (fmt ,##args) | 
|  | #endif | 
|  | #else | 
|  | static inline void debug_printf(const char *format, ...) { } | 
|  | #endif | 
|  | #define final_printf debug_printf | 
|  |  | 
|  | #ifdef __U_BOOT__ | 
|  | static void syntax_err(void) { | 
|  | printf("syntax error\n"); | 
|  | } | 
|  | #else | 
|  | static void __syntax(char *file, int line) { | 
|  | error_msg("syntax error %s:%d", file, line); | 
|  | } | 
|  | #define syntax() __syntax(__FILE__, __LINE__) | 
|  | #endif | 
|  |  | 
|  | #ifdef __U_BOOT__ | 
|  | static void *xmalloc(size_t size); | 
|  | static void *xrealloc(void *ptr, size_t size); | 
|  | #else | 
|  | /* Index of subroutines: */ | 
|  | /*   function prototypes for builtins */ | 
|  | static int builtin_cd(struct child_prog *child); | 
|  | static int builtin_env(struct child_prog *child); | 
|  | static int builtin_eval(struct child_prog *child); | 
|  | static int builtin_exec(struct child_prog *child); | 
|  | static int builtin_exit(struct child_prog *child); | 
|  | static int builtin_export(struct child_prog *child); | 
|  | static int builtin_fg_bg(struct child_prog *child); | 
|  | static int builtin_help(struct child_prog *child); | 
|  | static int builtin_jobs(struct child_prog *child); | 
|  | static int builtin_pwd(struct child_prog *child); | 
|  | static int builtin_read(struct child_prog *child); | 
|  | static int builtin_set(struct child_prog *child); | 
|  | static int builtin_shift(struct child_prog *child); | 
|  | static int builtin_source(struct child_prog *child); | 
|  | static int builtin_umask(struct child_prog *child); | 
|  | static int builtin_unset(struct child_prog *child); | 
|  | static int builtin_not_written(struct child_prog *child); | 
|  | #endif | 
|  | /*   o_string manipulation: */ | 
|  | static int b_check_space(o_string *o, int len); | 
|  | static int b_addchr(o_string *o, int ch); | 
|  | static void b_reset(o_string *o); | 
|  | static int b_addqchr(o_string *o, int ch, int quote); | 
|  | #ifndef __U_BOOT__ | 
|  | static int b_adduint(o_string *o, unsigned int i); | 
|  | #endif | 
|  | /*  in_str manipulations: */ | 
|  | static int static_get(struct in_str *i); | 
|  | static int static_peek(struct in_str *i); | 
|  | static int file_get(struct in_str *i); | 
|  | static int file_peek(struct in_str *i); | 
|  | #ifndef __U_BOOT__ | 
|  | static void setup_file_in_str(struct in_str *i, FILE *f); | 
|  | #else | 
|  | static void setup_file_in_str(struct in_str *i); | 
|  | #endif | 
|  | static void setup_string_in_str(struct in_str *i, const char *s); | 
|  | #ifndef __U_BOOT__ | 
|  | /*  close_me manipulations: */ | 
|  | static void mark_open(int fd); | 
|  | static void mark_closed(int fd); | 
|  | static void close_all(void); | 
|  | #endif | 
|  | /*  "run" the final data structures: */ | 
|  | static char *indenter(int i); | 
|  | static int free_pipe_list(struct pipe *head, int indent); | 
|  | static int free_pipe(struct pipe *pi, int indent); | 
|  | /*  really run the final data structures: */ | 
|  | #ifndef __U_BOOT__ | 
|  | static int setup_redirects(struct child_prog *prog, int squirrel[]); | 
|  | #endif | 
|  | static int run_list_real(struct pipe *pi); | 
|  | #ifndef __U_BOOT__ | 
|  | static void pseudo_exec(struct child_prog *child) __attribute__ ((noreturn)); | 
|  | #endif | 
|  | static int run_pipe_real(struct pipe *pi); | 
|  | /*   extended glob support: */ | 
|  | #ifndef __U_BOOT__ | 
|  | static int globhack(const char *src, int flags, glob_t *pglob); | 
|  | static int glob_needed(const char *s); | 
|  | static int xglob(o_string *dest, int flags, glob_t *pglob); | 
|  | #endif | 
|  | /*   variable assignment: */ | 
|  | static int is_assignment(const char *s); | 
|  | /*   data structure manipulation: */ | 
|  | #ifndef __U_BOOT__ | 
|  | static int setup_redirect(struct p_context *ctx, int fd, redir_type style, struct in_str *input); | 
|  | #endif | 
|  | static void initialize_context(struct p_context *ctx); | 
|  | static int done_word(o_string *dest, struct p_context *ctx); | 
|  | static int done_command(struct p_context *ctx); | 
|  | static int done_pipe(struct p_context *ctx, pipe_style type); | 
|  | /*   primary string parsing: */ | 
|  | #ifndef __U_BOOT__ | 
|  | static int redirect_dup_num(struct in_str *input); | 
|  | static int redirect_opt_num(o_string *o); | 
|  | static int process_command_subs(o_string *dest, struct p_context *ctx, struct in_str *input, int subst_end); | 
|  | static int parse_group(o_string *dest, struct p_context *ctx, struct in_str *input, int ch); | 
|  | #endif | 
|  | static char *lookup_param(char *src); | 
|  | static char *make_string(char **inp); | 
|  | static int handle_dollar(o_string *dest, struct p_context *ctx, struct in_str *input); | 
|  | #ifndef __U_BOOT__ | 
|  | static int parse_string(o_string *dest, struct p_context *ctx, const char *src); | 
|  | #endif | 
|  | static int parse_stream(o_string *dest, struct p_context *ctx, struct in_str *input0, int end_trigger); | 
|  | /*   setup: */ | 
|  | static int parse_stream_outer(struct in_str *inp, int flag); | 
|  | #ifndef __U_BOOT__ | 
|  | static int parse_string_outer(const char *s, int flag); | 
|  | static int parse_file_outer(FILE *f); | 
|  | #endif | 
|  | #ifndef __U_BOOT__ | 
|  | /*   job management: */ | 
|  | static int checkjobs(struct pipe* fg_pipe); | 
|  | static void insert_bg_job(struct pipe *pi); | 
|  | static void remove_bg_job(struct pipe *pi); | 
|  | #endif | 
|  | /*     local variable support */ | 
|  | static char **make_list_in(char **inp, char *name); | 
|  | static char *insert_var_value(char *inp); | 
|  | static char *get_local_var(const char *var); | 
|  |  | 
|  | #ifndef __U_BOOT__ | 
|  | /* Table of built-in functions.  They can be forked or not, depending on | 
|  | * context: within pipes, they fork.  As simple commands, they do not. | 
|  | * When used in non-forking context, they can change global variables | 
|  | * in the parent shell process.  If forked, of course they can not. | 
|  | * For example, 'unset foo | whatever' will parse and run, but foo will | 
|  | * still be set at the end. */ | 
|  | static struct built_in_command bltins[] = { | 
|  | {"bg", "Resume a job in the background", builtin_fg_bg}, | 
|  | {"break", "Exit for, while or until loop", builtin_not_written}, | 
|  | {"cd", "Change working directory", builtin_cd}, | 
|  | {"continue", "Continue for, while or until loop", builtin_not_written}, | 
|  | {"env", "Print all environment variables", builtin_env}, | 
|  | {"eval", "Construct and run shell command", builtin_eval}, | 
|  | {"exec", "Exec command, replacing this shell with the exec'd process", | 
|  | builtin_exec}, | 
|  | {"exit", "Exit from shell()", builtin_exit}, | 
|  | {"export", "Set environment variable", builtin_export}, | 
|  | {"fg", "Bring job into the foreground", builtin_fg_bg}, | 
|  | {"jobs", "Lists the active jobs", builtin_jobs}, | 
|  | {"pwd", "Print current directory", builtin_pwd}, | 
|  | {"read", "Input environment variable", builtin_read}, | 
|  | {"return", "Return from a function", builtin_not_written}, | 
|  | {"set", "Set/unset shell local variables", builtin_set}, | 
|  | {"shift", "Shift positional parameters", builtin_shift}, | 
|  | {"trap", "Trap signals", builtin_not_written}, | 
|  | {"ulimit","Controls resource limits", builtin_not_written}, | 
|  | {"umask","Sets file creation mask", builtin_umask}, | 
|  | {"unset", "Unset environment variable", builtin_unset}, | 
|  | {".", "Source-in and run commands in a file", builtin_source}, | 
|  | {"help", "List shell built-in commands", builtin_help}, | 
|  | {NULL, NULL, NULL} | 
|  | }; | 
|  |  | 
|  | static const char *set_cwd(void) | 
|  | { | 
|  | if(cwd==unknown) | 
|  | cwd = NULL;     /* xgetcwd(arg) called free(arg) */ | 
|  | cwd = xgetcwd((char *)cwd); | 
|  | if (!cwd) | 
|  | cwd = unknown; | 
|  | return cwd; | 
|  | } | 
|  |  | 
|  | /* built-in 'eval' handler */ | 
|  | static int builtin_eval(struct child_prog *child) | 
|  | { | 
|  | char *str = NULL; | 
|  | int rcode = EXIT_SUCCESS; | 
|  |  | 
|  | if (child->argv[1]) { | 
|  | str = make_string(child->argv + 1); | 
|  | parse_string_outer(str, FLAG_EXIT_FROM_LOOP | | 
|  | FLAG_PARSE_SEMICOLON); | 
|  | free(str); | 
|  | rcode = last_return_code; | 
|  | } | 
|  | return rcode; | 
|  | } | 
|  |  | 
|  | /* built-in 'cd <path>' handler */ | 
|  | static int builtin_cd(struct child_prog *child) | 
|  | { | 
|  | char *newdir; | 
|  | if (child->argv[1] == NULL) | 
|  | newdir = getenv("HOME"); | 
|  | else | 
|  | newdir = child->argv[1]; | 
|  | if (chdir(newdir)) { | 
|  | printf("cd: %s: %s\n", newdir, strerror(errno)); | 
|  | return EXIT_FAILURE; | 
|  | } | 
|  | set_cwd(); | 
|  | return EXIT_SUCCESS; | 
|  | } | 
|  |  | 
|  | /* built-in 'env' handler */ | 
|  | static int builtin_env(struct child_prog *dummy) | 
|  | { | 
|  | char **e = environ; | 
|  | if (e == NULL) return EXIT_FAILURE; | 
|  | for (; *e; e++) { | 
|  | puts(*e); | 
|  | } | 
|  | return EXIT_SUCCESS; | 
|  | } | 
|  |  | 
|  | /* built-in 'exec' handler */ | 
|  | static int builtin_exec(struct child_prog *child) | 
|  | { | 
|  | if (child->argv[1] == NULL) | 
|  | return EXIT_SUCCESS;   /* Really? */ | 
|  | child->argv++; | 
|  | pseudo_exec(child); | 
|  | /* never returns */ | 
|  | } | 
|  |  | 
|  | /* built-in 'exit' handler */ | 
|  | static int builtin_exit(struct child_prog *child) | 
|  | { | 
|  | if (child->argv[1] == NULL) | 
|  | exit(last_return_code); | 
|  | exit (atoi(child->argv[1])); | 
|  | } | 
|  |  | 
|  | /* built-in 'export VAR=value' handler */ | 
|  | static int builtin_export(struct child_prog *child) | 
|  | { | 
|  | int res = 0; | 
|  | char *name = child->argv[1]; | 
|  |  | 
|  | if (name == NULL) { | 
|  | return (builtin_env(child)); | 
|  | } | 
|  |  | 
|  | name = strdup(name); | 
|  |  | 
|  | if(name) { | 
|  | char *value = strchr(name, '='); | 
|  |  | 
|  | if (!value) { | 
|  | char *tmp; | 
|  | /* They are exporting something without an =VALUE */ | 
|  |  | 
|  | value = get_local_var(name); | 
|  | if (value) { | 
|  | size_t ln = strlen(name); | 
|  |  | 
|  | tmp = realloc(name, ln+strlen(value)+2); | 
|  | if(tmp==NULL) | 
|  | res = -1; | 
|  | else { | 
|  | sprintf(tmp+ln, "=%s", value); | 
|  | name = tmp; | 
|  | } | 
|  | } else { | 
|  | /* bash does not return an error when trying to export | 
|  | * an undefined variable.  Do likewise. */ | 
|  | res = 1; | 
|  | } | 
|  | } | 
|  | } | 
|  | if (res<0) | 
|  | perror_msg("export"); | 
|  | else if(res==0) | 
|  | res = set_local_var(name, 1); | 
|  | else | 
|  | res = 0; | 
|  | free(name); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /* built-in 'fg' and 'bg' handler */ | 
|  | static int builtin_fg_bg(struct child_prog *child) | 
|  | { | 
|  | int i, jobnum; | 
|  | struct pipe *pi=NULL; | 
|  |  | 
|  | if (!interactive) | 
|  | return EXIT_FAILURE; | 
|  | /* If they gave us no args, assume they want the last backgrounded task */ | 
|  | if (!child->argv[1]) { | 
|  | for (pi = job_list; pi; pi = pi->next) { | 
|  | if (pi->jobid == last_jobid) { | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (!pi) { | 
|  | error_msg("%s: no current job", child->argv[0]); | 
|  | return EXIT_FAILURE; | 
|  | } | 
|  | } else { | 
|  | if (sscanf(child->argv[1], "%%%d", &jobnum) != 1) { | 
|  | error_msg("%s: bad argument '%s'", child->argv[0], child->argv[1]); | 
|  | return EXIT_FAILURE; | 
|  | } | 
|  | for (pi = job_list; pi; pi = pi->next) { | 
|  | if (pi->jobid == jobnum) { | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (!pi) { | 
|  | error_msg("%s: %d: no such job", child->argv[0], jobnum); | 
|  | return EXIT_FAILURE; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (*child->argv[0] == 'f') { | 
|  | /* Put the job into the foreground.  */ | 
|  | tcsetpgrp(shell_terminal, pi->pgrp); | 
|  | } | 
|  |  | 
|  | /* Restart the processes in the job */ | 
|  | for (i = 0; i < pi->num_progs; i++) | 
|  | pi->progs[i].is_stopped = 0; | 
|  |  | 
|  | if ( (i=kill(- pi->pgrp, SIGCONT)) < 0) { | 
|  | if (i == ESRCH) { | 
|  | remove_bg_job(pi); | 
|  | } else { | 
|  | perror_msg("kill (SIGCONT)"); | 
|  | } | 
|  | } | 
|  |  | 
|  | pi->stopped_progs = 0; | 
|  | return EXIT_SUCCESS; | 
|  | } | 
|  |  | 
|  | /* built-in 'help' handler */ | 
|  | static int builtin_help(struct child_prog *dummy) | 
|  | { | 
|  | struct built_in_command *x; | 
|  |  | 
|  | printf("\nBuilt-in commands:\n"); | 
|  | printf("-------------------\n"); | 
|  | for (x = bltins; x->cmd; x++) { | 
|  | if (x->descr==NULL) | 
|  | continue; | 
|  | printf("%s\t%s\n", x->cmd, x->descr); | 
|  | } | 
|  | printf("\n\n"); | 
|  | return EXIT_SUCCESS; | 
|  | } | 
|  |  | 
|  | /* built-in 'jobs' handler */ | 
|  | static int builtin_jobs(struct child_prog *child) | 
|  | { | 
|  | struct pipe *job; | 
|  | char *status_string; | 
|  |  | 
|  | for (job = job_list; job; job = job->next) { | 
|  | if (job->running_progs == job->stopped_progs) | 
|  | status_string = "Stopped"; | 
|  | else | 
|  | status_string = "Running"; | 
|  |  | 
|  | printf(JOB_STATUS_FORMAT, job->jobid, status_string, job->text); | 
|  | } | 
|  | return EXIT_SUCCESS; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* built-in 'pwd' handler */ | 
|  | static int builtin_pwd(struct child_prog *dummy) | 
|  | { | 
|  | puts(set_cwd()); | 
|  | return EXIT_SUCCESS; | 
|  | } | 
|  |  | 
|  | /* built-in 'read VAR' handler */ | 
|  | static int builtin_read(struct child_prog *child) | 
|  | { | 
|  | int res; | 
|  |  | 
|  | if (child->argv[1]) { | 
|  | char string[BUFSIZ]; | 
|  | char *var = 0; | 
|  |  | 
|  | string[0] = 0;  /* In case stdin has only EOF */ | 
|  | /* read string */ | 
|  | fgets(string, sizeof(string), stdin); | 
|  | chomp(string); | 
|  | var = malloc(strlen(child->argv[1])+strlen(string)+2); | 
|  | if(var) { | 
|  | sprintf(var, "%s=%s", child->argv[1], string); | 
|  | res = set_local_var(var, 0); | 
|  | } else | 
|  | res = -1; | 
|  | if (res) | 
|  | fprintf(stderr, "read: %m\n"); | 
|  | free(var);      /* So not move up to avoid breaking errno */ | 
|  | return res; | 
|  | } else { | 
|  | do res=getchar(); while(res!='\n' && res!=EOF); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* built-in 'set VAR=value' handler */ | 
|  | static int builtin_set(struct child_prog *child) | 
|  | { | 
|  | char *temp = child->argv[1]; | 
|  | struct variables *e; | 
|  |  | 
|  | if (temp == NULL) | 
|  | for(e = top_vars; e; e=e->next) | 
|  | printf("%s=%s\n", e->name, e->value); | 
|  | else | 
|  | set_local_var(temp, 0); | 
|  |  | 
|  | return EXIT_SUCCESS; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Built-in 'shift' handler */ | 
|  | static int builtin_shift(struct child_prog *child) | 
|  | { | 
|  | int n=1; | 
|  | if (child->argv[1]) { | 
|  | n=atoi(child->argv[1]); | 
|  | } | 
|  | if (n>=0 && n<global_argc) { | 
|  | /* XXX This probably breaks $0 */ | 
|  | global_argc -= n; | 
|  | global_argv += n; | 
|  | return EXIT_SUCCESS; | 
|  | } else { | 
|  | return EXIT_FAILURE; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Built-in '.' handler (read-in and execute commands from file) */ | 
|  | static int builtin_source(struct child_prog *child) | 
|  | { | 
|  | FILE *input; | 
|  | int status; | 
|  |  | 
|  | if (child->argv[1] == NULL) | 
|  | return EXIT_FAILURE; | 
|  |  | 
|  | /* XXX search through $PATH is missing */ | 
|  | input = fopen(child->argv[1], "r"); | 
|  | if (!input) { | 
|  | error_msg("Couldn't open file '%s'", child->argv[1]); | 
|  | return EXIT_FAILURE; | 
|  | } | 
|  |  | 
|  | /* Now run the file */ | 
|  | /* XXX argv and argc are broken; need to save old global_argv | 
|  | * (pointer only is OK!) on this stack frame, | 
|  | * set global_argv=child->argv+1, recurse, and restore. */ | 
|  | mark_open(fileno(input)); | 
|  | status = parse_file_outer(input); | 
|  | mark_closed(fileno(input)); | 
|  | fclose(input); | 
|  | return (status); | 
|  | } | 
|  |  | 
|  | static int builtin_umask(struct child_prog *child) | 
|  | { | 
|  | mode_t new_umask; | 
|  | const char *arg = child->argv[1]; | 
|  | char *end; | 
|  | if (arg) { | 
|  | new_umask=strtoul(arg, &end, 8); | 
|  | if (*end!='\0' || end == arg) { | 
|  | return EXIT_FAILURE; | 
|  | } | 
|  | } else { | 
|  | printf("%.3o\n", (unsigned int) (new_umask=umask(0))); | 
|  | } | 
|  | umask(new_umask); | 
|  | return EXIT_SUCCESS; | 
|  | } | 
|  |  | 
|  | /* built-in 'unset VAR' handler */ | 
|  | static int builtin_unset(struct child_prog *child) | 
|  | { | 
|  | /* bash returned already true */ | 
|  | unset_local_var(child->argv[1]); | 
|  | return EXIT_SUCCESS; | 
|  | } | 
|  |  | 
|  | static int builtin_not_written(struct child_prog *child) | 
|  | { | 
|  | printf("builtin_%s not written\n",child->argv[0]); | 
|  | return EXIT_FAILURE; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int b_check_space(o_string *o, int len) | 
|  | { | 
|  | /* It would be easy to drop a more restrictive policy | 
|  | * in here, such as setting a maximum string length */ | 
|  | if (o->length + len > o->maxlen) { | 
|  | char *old_data = o->data; | 
|  | /* assert (data == NULL || o->maxlen != 0); */ | 
|  | o->maxlen += max(2*len, B_CHUNK); | 
|  | o->data = realloc(o->data, 1 + o->maxlen); | 
|  | if (o->data == NULL) { | 
|  | free(old_data); | 
|  | } | 
|  | } | 
|  | return o->data == NULL; | 
|  | } | 
|  |  | 
|  | static int b_addchr(o_string *o, int ch) | 
|  | { | 
|  | debug_printf("b_addchr: %c %d %p\n", ch, o->length, o); | 
|  | if (b_check_space(o, 1)) return B_NOSPAC; | 
|  | o->data[o->length] = ch; | 
|  | o->length++; | 
|  | o->data[o->length] = '\0'; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void b_reset(o_string *o) | 
|  | { | 
|  | o->length = 0; | 
|  | o->nonnull = 0; | 
|  | if (o->data != NULL) *o->data = '\0'; | 
|  | } | 
|  |  | 
|  | static void b_free(o_string *o) | 
|  | { | 
|  | b_reset(o); | 
|  | free(o->data); | 
|  | o->data = NULL; | 
|  | o->maxlen = 0; | 
|  | } | 
|  |  | 
|  | /* My analysis of quoting semantics tells me that state information | 
|  | * is associated with a destination, not a source. | 
|  | */ | 
|  | static int b_addqchr(o_string *o, int ch, int quote) | 
|  | { | 
|  | if (quote && strchr("*?[\\",ch)) { | 
|  | int rc; | 
|  | rc = b_addchr(o, '\\'); | 
|  | if (rc) return rc; | 
|  | } | 
|  | return b_addchr(o, ch); | 
|  | } | 
|  |  | 
|  | /* belongs in utility.c */ | 
|  | char *simple_itoa(unsigned int i) | 
|  | { | 
|  | /* 21 digits plus null terminator, good for 64-bit or smaller ints */ | 
|  | static char local[22]; | 
|  | char *p = &local[21]; | 
|  | *p-- = '\0'; | 
|  | do { | 
|  | *p-- = '0' + i % 10; | 
|  | i /= 10; | 
|  | } while (i > 0); | 
|  | return p + 1; | 
|  | } | 
|  |  | 
|  | #ifndef __U_BOOT__ | 
|  | static int b_adduint(o_string *o, unsigned int i) | 
|  | { | 
|  | int r; | 
|  | char *p = simple_itoa(i); | 
|  | /* no escape checking necessary */ | 
|  | do r=b_addchr(o, *p++); while (r==0 && *p); | 
|  | return r; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int static_get(struct in_str *i) | 
|  | { | 
|  | int ch = *i->p++; | 
|  | if (ch=='\0') return EOF; | 
|  | return ch; | 
|  | } | 
|  |  | 
|  | static int static_peek(struct in_str *i) | 
|  | { | 
|  | return *i->p; | 
|  | } | 
|  |  | 
|  | #ifndef __U_BOOT__ | 
|  | static inline void cmdedit_set_initial_prompt(void) | 
|  | { | 
|  | #ifndef CONFIG_FEATURE_SH_FANCY_PROMPT | 
|  | PS1 = NULL; | 
|  | #else | 
|  | PS1 = getenv("PS1"); | 
|  | if(PS1==0) | 
|  | PS1 = "\\w \\$ "; | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static inline void setup_prompt_string(int promptmode, char **prompt_str) | 
|  | { | 
|  | debug_printf("setup_prompt_string %d ",promptmode); | 
|  | #ifndef CONFIG_FEATURE_SH_FANCY_PROMPT | 
|  | /* Set up the prompt */ | 
|  | if (promptmode == 1) { | 
|  | free(PS1); | 
|  | PS1=xmalloc(strlen(cwd)+4); | 
|  | sprintf(PS1, "%s %s", cwd, ( geteuid() != 0 ) ?  "$ ":"# "); | 
|  | *prompt_str = PS1; | 
|  | } else { | 
|  | *prompt_str = PS2; | 
|  | } | 
|  | #else | 
|  | *prompt_str = (promptmode==1)? PS1 : PS2; | 
|  | #endif | 
|  | debug_printf("result %s\n",*prompt_str); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void get_user_input(struct in_str *i) | 
|  | { | 
|  | #ifndef __U_BOOT__ | 
|  | char *prompt_str; | 
|  | static char the_command[BUFSIZ]; | 
|  |  | 
|  | setup_prompt_string(i->promptmode, &prompt_str); | 
|  | #ifdef CONFIG_FEATURE_COMMAND_EDITING | 
|  | /* | 
|  | ** enable command line editing only while a command line | 
|  | ** is actually being read; otherwise, we'll end up bequeathing | 
|  | ** atexit() handlers and other unwanted stuff to our | 
|  | ** child processes (rob@sysgo.de) | 
|  | */ | 
|  | cmdedit_read_input(prompt_str, the_command); | 
|  | #else | 
|  | fputs(prompt_str, stdout); | 
|  | fflush(stdout); | 
|  | the_command[0]=fgetc(i->file); | 
|  | the_command[1]='\0'; | 
|  | #endif | 
|  | fflush(stdout); | 
|  | i->p = the_command; | 
|  | #else | 
|  | extern char console_buffer[]; | 
|  | int n; | 
|  | static char the_command[CONFIG_SYS_CBSIZE]; | 
|  |  | 
|  | #ifdef CONFIG_BOOT_RETRY_TIME | 
|  | #  ifndef CONFIG_RESET_TO_RETRY | 
|  | #	error "This currently only works with CONFIG_RESET_TO_RETRY enabled" | 
|  | #  endif | 
|  | reset_cmd_timeout(); | 
|  | #endif | 
|  | i->__promptme = 1; | 
|  | if (i->promptmode == 1) { | 
|  | n = readline(CONFIG_SYS_PROMPT); | 
|  | } else { | 
|  | n = readline(CONFIG_SYS_PROMPT_HUSH_PS2); | 
|  | } | 
|  | #ifdef CONFIG_BOOT_RETRY_TIME | 
|  | if (n == -2) { | 
|  | puts("\nTimeout waiting for command\n"); | 
|  | #  ifdef CONFIG_RESET_TO_RETRY | 
|  | do_reset(NULL, 0, 0, NULL); | 
|  | #  else | 
|  | #	error "This currently only works with CONFIG_RESET_TO_RETRY enabled" | 
|  | #  endif | 
|  | } | 
|  | #endif | 
|  | if (n == -1 ) { | 
|  | flag_repeat = 0; | 
|  | i->__promptme = 0; | 
|  | } | 
|  | n = strlen(console_buffer); | 
|  | console_buffer[n] = '\n'; | 
|  | console_buffer[n+1]= '\0'; | 
|  | if (had_ctrlc()) flag_repeat = 0; | 
|  | clear_ctrlc(); | 
|  | do_repeat = 0; | 
|  | if (i->promptmode == 1) { | 
|  | if (console_buffer[0] == '\n'&& flag_repeat == 0) { | 
|  | strcpy(the_command,console_buffer); | 
|  | } | 
|  | else { | 
|  | if (console_buffer[0] != '\n') { | 
|  | strcpy(the_command,console_buffer); | 
|  | flag_repeat = 1; | 
|  | } | 
|  | else { | 
|  | do_repeat = 1; | 
|  | } | 
|  | } | 
|  | i->p = the_command; | 
|  | } | 
|  | else { | 
|  | if (console_buffer[0] != '\n') { | 
|  | if (strlen(the_command) + strlen(console_buffer) | 
|  | < CONFIG_SYS_CBSIZE) { | 
|  | n = strlen(the_command); | 
|  | the_command[n-1] = ' '; | 
|  | strcpy(&the_command[n],console_buffer); | 
|  | } | 
|  | else { | 
|  | the_command[0] = '\n'; | 
|  | the_command[1] = '\0'; | 
|  | flag_repeat = 0; | 
|  | } | 
|  | } | 
|  | if (i->__promptme == 0) { | 
|  | the_command[0] = '\n'; | 
|  | the_command[1] = '\0'; | 
|  | } | 
|  | i->p = console_buffer; | 
|  | } | 
|  | #endif | 
|  | } | 
|  |  | 
|  | /* This is the magic location that prints prompts | 
|  | * and gets data back from the user */ | 
|  | static int file_get(struct in_str *i) | 
|  | { | 
|  | int ch; | 
|  |  | 
|  | ch = 0; | 
|  | /* If there is data waiting, eat it up */ | 
|  | if (i->p && *i->p) { | 
|  | ch = *i->p++; | 
|  | } else { | 
|  | /* need to double check i->file because we might be doing something | 
|  | * more complicated by now, like sourcing or substituting. */ | 
|  | #ifndef __U_BOOT__ | 
|  | if (i->__promptme && interactive && i->file == stdin) { | 
|  | while(! i->p || (interactive && strlen(i->p)==0) ) { | 
|  | #else | 
|  | while(! i->p  || strlen(i->p)==0 ) { | 
|  | #endif | 
|  | get_user_input(i); | 
|  | } | 
|  | i->promptmode=2; | 
|  | #ifndef __U_BOOT__ | 
|  | i->__promptme = 0; | 
|  | #endif | 
|  | if (i->p && *i->p) { | 
|  | ch = *i->p++; | 
|  | } | 
|  | #ifndef __U_BOOT__ | 
|  | } else { | 
|  | ch = fgetc(i->file); | 
|  | } | 
|  |  | 
|  | #endif | 
|  | debug_printf("b_getch: got a %d\n", ch); | 
|  | } | 
|  | #ifndef __U_BOOT__ | 
|  | if (ch == '\n') i->__promptme=1; | 
|  | #endif | 
|  | return ch; | 
|  | } | 
|  |  | 
|  | /* All the callers guarantee this routine will never be | 
|  | * used right after a newline, so prompting is not needed. | 
|  | */ | 
|  | static int file_peek(struct in_str *i) | 
|  | { | 
|  | #ifndef __U_BOOT__ | 
|  | if (i->p && *i->p) { | 
|  | #endif | 
|  | return *i->p; | 
|  | #ifndef __U_BOOT__ | 
|  | } else { | 
|  | i->peek_buf[0] = fgetc(i->file); | 
|  | i->peek_buf[1] = '\0'; | 
|  | i->p = i->peek_buf; | 
|  | debug_printf("b_peek: got a %d\n", *i->p); | 
|  | return *i->p; | 
|  | } | 
|  | #endif | 
|  | } | 
|  |  | 
|  | #ifndef __U_BOOT__ | 
|  | static void setup_file_in_str(struct in_str *i, FILE *f) | 
|  | #else | 
|  | static void setup_file_in_str(struct in_str *i) | 
|  | #endif | 
|  | { | 
|  | i->peek = file_peek; | 
|  | i->get = file_get; | 
|  | i->__promptme=1; | 
|  | i->promptmode=1; | 
|  | #ifndef __U_BOOT__ | 
|  | i->file = f; | 
|  | #endif | 
|  | i->p = NULL; | 
|  | } | 
|  |  | 
|  | static void setup_string_in_str(struct in_str *i, const char *s) | 
|  | { | 
|  | i->peek = static_peek; | 
|  | i->get = static_get; | 
|  | i->__promptme=1; | 
|  | i->promptmode=1; | 
|  | i->p = s; | 
|  | } | 
|  |  | 
|  | #ifndef __U_BOOT__ | 
|  | static void mark_open(int fd) | 
|  | { | 
|  | struct close_me *new = xmalloc(sizeof(struct close_me)); | 
|  | new->fd = fd; | 
|  | new->next = close_me_head; | 
|  | close_me_head = new; | 
|  | } | 
|  |  | 
|  | static void mark_closed(int fd) | 
|  | { | 
|  | struct close_me *tmp; | 
|  | if (close_me_head == NULL || close_me_head->fd != fd) | 
|  | error_msg_and_die("corrupt close_me"); | 
|  | tmp = close_me_head; | 
|  | close_me_head = close_me_head->next; | 
|  | free(tmp); | 
|  | } | 
|  |  | 
|  | static void close_all(void) | 
|  | { | 
|  | struct close_me *c; | 
|  | for (c=close_me_head; c; c=c->next) { | 
|  | close(c->fd); | 
|  | } | 
|  | close_me_head = NULL; | 
|  | } | 
|  |  | 
|  | /* squirrel != NULL means we squirrel away copies of stdin, stdout, | 
|  | * and stderr if they are redirected. */ | 
|  | static int setup_redirects(struct child_prog *prog, int squirrel[]) | 
|  | { | 
|  | int openfd, mode; | 
|  | struct redir_struct *redir; | 
|  |  | 
|  | for (redir=prog->redirects; redir; redir=redir->next) { | 
|  | if (redir->dup == -1 && redir->word.gl_pathv == NULL) { | 
|  | /* something went wrong in the parse.  Pretend it didn't happen */ | 
|  | continue; | 
|  | } | 
|  | if (redir->dup == -1) { | 
|  | mode=redir_table[redir->type].mode; | 
|  | openfd = open(redir->word.gl_pathv[0], mode, 0666); | 
|  | if (openfd < 0) { | 
|  | /* this could get lost if stderr has been redirected, but | 
|  | bash and ash both lose it as well (though zsh doesn't!) */ | 
|  | perror_msg("error opening %s", redir->word.gl_pathv[0]); | 
|  | return 1; | 
|  | } | 
|  | } else { | 
|  | openfd = redir->dup; | 
|  | } | 
|  |  | 
|  | if (openfd != redir->fd) { | 
|  | if (squirrel && redir->fd < 3) { | 
|  | squirrel[redir->fd] = dup(redir->fd); | 
|  | } | 
|  | if (openfd == -3) { | 
|  | close(openfd); | 
|  | } else { | 
|  | dup2(openfd, redir->fd); | 
|  | if (redir->dup == -1) | 
|  | close (openfd); | 
|  | } | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void restore_redirects(int squirrel[]) | 
|  | { | 
|  | int i, fd; | 
|  | for (i=0; i<3; i++) { | 
|  | fd = squirrel[i]; | 
|  | if (fd != -1) { | 
|  | /* No error checking.  I sure wouldn't know what | 
|  | * to do with an error if I found one! */ | 
|  | dup2(fd, i); | 
|  | close(fd); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* never returns */ | 
|  | /* XXX no exit() here.  If you don't exec, use _exit instead. | 
|  | * The at_exit handlers apparently confuse the calling process, | 
|  | * in particular stdin handling.  Not sure why? */ | 
|  | static void pseudo_exec(struct child_prog *child) | 
|  | { | 
|  | int i, rcode; | 
|  | char *p; | 
|  | struct built_in_command *x; | 
|  | if (child->argv) { | 
|  | for (i=0; is_assignment(child->argv[i]); i++) { | 
|  | debug_printf("pid %d environment modification: %s\n",getpid(),child->argv[i]); | 
|  | p = insert_var_value(child->argv[i]); | 
|  | putenv(strdup(p)); | 
|  | if (p != child->argv[i]) free(p); | 
|  | } | 
|  | child->argv+=i;  /* XXX this hack isn't so horrible, since we are about | 
|  | to exit, and therefore don't need to keep data | 
|  | structures consistent for free() use. */ | 
|  | /* If a variable is assigned in a forest, and nobody listens, | 
|  | * was it ever really set? | 
|  | */ | 
|  | if (child->argv[0] == NULL) { | 
|  | _exit(EXIT_SUCCESS); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check if the command matches any of the builtins. | 
|  | * Depending on context, this might be redundant.  But it's | 
|  | * easier to waste a few CPU cycles than it is to figure out | 
|  | * if this is one of those cases. | 
|  | */ | 
|  | for (x = bltins; x->cmd; x++) { | 
|  | if (strcmp(child->argv[0], x->cmd) == 0 ) { | 
|  | debug_printf("builtin exec %s\n", child->argv[0]); | 
|  | rcode = x->function(child); | 
|  | fflush(stdout); | 
|  | _exit(rcode); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Check if the command matches any busybox internal commands | 
|  | * ("applets") here. | 
|  | * FIXME: This feature is not 100% safe, since | 
|  | * BusyBox is not fully reentrant, so we have no guarantee the things | 
|  | * from the .bss are still zeroed, or that things from .data are still | 
|  | * at their defaults.  We could exec ourself from /proc/self/exe, but I | 
|  | * really dislike relying on /proc for things.  We could exec ourself | 
|  | * from global_argv[0], but if we are in a chroot, we may not be able | 
|  | * to find ourself... */ | 
|  | #ifdef CONFIG_FEATURE_SH_STANDALONE_SHELL | 
|  | { | 
|  | int argc_l; | 
|  | char** argv_l=child->argv; | 
|  | char *name = child->argv[0]; | 
|  |  | 
|  | #ifdef CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN | 
|  | /* Following discussions from November 2000 on the busybox mailing | 
|  | * list, the default configuration, (without | 
|  | * get_last_path_component()) lets the user force use of an | 
|  | * external command by specifying the full (with slashes) filename. | 
|  | * If you enable CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN then applets | 
|  | * _aways_ override external commands, so if you want to run | 
|  | * /bin/cat, it will use BusyBox cat even if /bin/cat exists on the | 
|  | * filesystem and is _not_ busybox.  Some systems may want this, | 
|  | * most do not.  */ | 
|  | name = get_last_path_component(name); | 
|  | #endif | 
|  | /* Count argc for use in a second... */ | 
|  | for(argc_l=0;*argv_l!=NULL; argv_l++, argc_l++); | 
|  | optind = 1; | 
|  | debug_printf("running applet %s\n", name); | 
|  | run_applet_by_name(name, argc_l, child->argv); | 
|  | } | 
|  | #endif | 
|  | debug_printf("exec of %s\n",child->argv[0]); | 
|  | execvp(child->argv[0],child->argv); | 
|  | perror_msg("couldn't exec: %s",child->argv[0]); | 
|  | _exit(1); | 
|  | } else if (child->group) { | 
|  | debug_printf("runtime nesting to group\n"); | 
|  | interactive=0;    /* crucial!!!! */ | 
|  | rcode = run_list_real(child->group); | 
|  | /* OK to leak memory by not calling free_pipe_list, | 
|  | * since this process is about to exit */ | 
|  | _exit(rcode); | 
|  | } else { | 
|  | /* Can happen.  See what bash does with ">foo" by itself. */ | 
|  | debug_printf("trying to pseudo_exec null command\n"); | 
|  | _exit(EXIT_SUCCESS); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void insert_bg_job(struct pipe *pi) | 
|  | { | 
|  | struct pipe *thejob; | 
|  |  | 
|  | /* Linear search for the ID of the job to use */ | 
|  | pi->jobid = 1; | 
|  | for (thejob = job_list; thejob; thejob = thejob->next) | 
|  | if (thejob->jobid >= pi->jobid) | 
|  | pi->jobid = thejob->jobid + 1; | 
|  |  | 
|  | /* add thejob to the list of running jobs */ | 
|  | if (!job_list) { | 
|  | thejob = job_list = xmalloc(sizeof(*thejob)); | 
|  | } else { | 
|  | for (thejob = job_list; thejob->next; thejob = thejob->next) /* nothing */; | 
|  | thejob->next = xmalloc(sizeof(*thejob)); | 
|  | thejob = thejob->next; | 
|  | } | 
|  |  | 
|  | /* physically copy the struct job */ | 
|  | memcpy(thejob, pi, sizeof(struct pipe)); | 
|  | thejob->next = NULL; | 
|  | thejob->running_progs = thejob->num_progs; | 
|  | thejob->stopped_progs = 0; | 
|  | thejob->text = xmalloc(BUFSIZ); /* cmdedit buffer size */ | 
|  |  | 
|  | /*if (pi->progs[0] && pi->progs[0].argv && pi->progs[0].argv[0]) */ | 
|  | { | 
|  | char *bar=thejob->text; | 
|  | char **foo=pi->progs[0].argv; | 
|  | while(foo && *foo) { | 
|  | bar += sprintf(bar, "%s ", *foo++); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* we don't wait for background thejobs to return -- append it | 
|  | to the list of backgrounded thejobs and leave it alone */ | 
|  | printf("[%d] %d\n", thejob->jobid, thejob->progs[0].pid); | 
|  | last_bg_pid = thejob->progs[0].pid; | 
|  | last_jobid = thejob->jobid; | 
|  | } | 
|  |  | 
|  | /* remove a backgrounded job */ | 
|  | static void remove_bg_job(struct pipe *pi) | 
|  | { | 
|  | struct pipe *prev_pipe; | 
|  |  | 
|  | if (pi == job_list) { | 
|  | job_list = pi->next; | 
|  | } else { | 
|  | prev_pipe = job_list; | 
|  | while (prev_pipe->next != pi) | 
|  | prev_pipe = prev_pipe->next; | 
|  | prev_pipe->next = pi->next; | 
|  | } | 
|  | if (job_list) | 
|  | last_jobid = job_list->jobid; | 
|  | else | 
|  | last_jobid = 0; | 
|  |  | 
|  | pi->stopped_progs = 0; | 
|  | free_pipe(pi, 0); | 
|  | free(pi); | 
|  | } | 
|  |  | 
|  | /* Checks to see if any processes have exited -- if they | 
|  | have, figure out why and see if a job has completed */ | 
|  | static int checkjobs(struct pipe* fg_pipe) | 
|  | { | 
|  | int attributes; | 
|  | int status; | 
|  | int prognum = 0; | 
|  | struct pipe *pi; | 
|  | pid_t childpid; | 
|  |  | 
|  | attributes = WUNTRACED; | 
|  | if (fg_pipe==NULL) { | 
|  | attributes |= WNOHANG; | 
|  | } | 
|  |  | 
|  | while ((childpid = waitpid(-1, &status, attributes)) > 0) { | 
|  | if (fg_pipe) { | 
|  | int i, rcode = 0; | 
|  | for (i=0; i < fg_pipe->num_progs; i++) { | 
|  | if (fg_pipe->progs[i].pid == childpid) { | 
|  | if (i==fg_pipe->num_progs-1) | 
|  | rcode=WEXITSTATUS(status); | 
|  | (fg_pipe->num_progs)--; | 
|  | return(rcode); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | for (pi = job_list; pi; pi = pi->next) { | 
|  | prognum = 0; | 
|  | while (prognum < pi->num_progs && pi->progs[prognum].pid != childpid) { | 
|  | prognum++; | 
|  | } | 
|  | if (prognum < pi->num_progs) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if(pi==NULL) { | 
|  | debug_printf("checkjobs: pid %d was not in our list!\n", childpid); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (WIFEXITED(status) || WIFSIGNALED(status)) { | 
|  | /* child exited */ | 
|  | pi->running_progs--; | 
|  | pi->progs[prognum].pid = 0; | 
|  |  | 
|  | if (!pi->running_progs) { | 
|  | printf(JOB_STATUS_FORMAT, pi->jobid, "Done", pi->text); | 
|  | remove_bg_job(pi); | 
|  | } | 
|  | } else { | 
|  | /* child stopped */ | 
|  | pi->stopped_progs++; | 
|  | pi->progs[prognum].is_stopped = 1; | 
|  |  | 
|  | #if 0 | 
|  | /* Printing this stuff is a pain, since it tends to | 
|  | * overwrite the prompt an inconveinient moments.  So | 
|  | * don't do that.  */ | 
|  | if (pi->stopped_progs == pi->num_progs) { | 
|  | printf("\n"JOB_STATUS_FORMAT, pi->jobid, "Stopped", pi->text); | 
|  | } | 
|  | #endif | 
|  | } | 
|  | } | 
|  |  | 
|  | if (childpid == -1 && errno != ECHILD) | 
|  | perror_msg("waitpid"); | 
|  |  | 
|  | /* move the shell to the foreground */ | 
|  | /*if (interactive && tcsetpgrp(shell_terminal, getpgid(0))) */ | 
|  | /*	perror_msg("tcsetpgrp-2"); */ | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* Figure out our controlling tty, checking in order stderr, | 
|  | * stdin, and stdout.  If check_pgrp is set, also check that | 
|  | * we belong to the foreground process group associated with | 
|  | * that tty.  The value of shell_terminal is needed in order to call | 
|  | * tcsetpgrp(shell_terminal, ...); */ | 
|  | void controlling_tty(int check_pgrp) | 
|  | { | 
|  | pid_t curpgrp; | 
|  |  | 
|  | if ((curpgrp = tcgetpgrp(shell_terminal = 2)) < 0 | 
|  | && (curpgrp = tcgetpgrp(shell_terminal = 0)) < 0 | 
|  | && (curpgrp = tcgetpgrp(shell_terminal = 1)) < 0) | 
|  | goto shell_terminal_error; | 
|  |  | 
|  | if (check_pgrp && curpgrp != getpgid(0)) | 
|  | goto shell_terminal_error; | 
|  |  | 
|  | return; | 
|  |  | 
|  | shell_terminal_error: | 
|  | shell_terminal = -1; | 
|  | return; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* run_pipe_real() starts all the jobs, but doesn't wait for anything | 
|  | * to finish.  See checkjobs(). | 
|  | * | 
|  | * return code is normally -1, when the caller has to wait for children | 
|  | * to finish to determine the exit status of the pipe.  If the pipe | 
|  | * is a simple builtin command, however, the action is done by the | 
|  | * time run_pipe_real returns, and the exit code is provided as the | 
|  | * return value. | 
|  | * | 
|  | * The input of the pipe is always stdin, the output is always | 
|  | * stdout.  The outpipe[] mechanism in BusyBox-0.48 lash is bogus, | 
|  | * because it tries to avoid running the command substitution in | 
|  | * subshell, when that is in fact necessary.  The subshell process | 
|  | * now has its stdout directed to the input of the appropriate pipe, | 
|  | * so this routine is noticeably simpler. | 
|  | */ | 
|  | static int run_pipe_real(struct pipe *pi) | 
|  | { | 
|  | int i; | 
|  | #ifndef __U_BOOT__ | 
|  | int nextin, nextout; | 
|  | int pipefds[2];				/* pipefds[0] is for reading */ | 
|  | struct child_prog *child; | 
|  | struct built_in_command *x; | 
|  | char *p; | 
|  | # if __GNUC__ | 
|  | /* Avoid longjmp clobbering */ | 
|  | (void) &i; | 
|  | (void) &nextin; | 
|  | (void) &nextout; | 
|  | (void) &child; | 
|  | # endif | 
|  | #else | 
|  | int nextin; | 
|  | int flag = do_repeat ? CMD_FLAG_REPEAT : 0; | 
|  | struct child_prog *child; | 
|  | cmd_tbl_t *cmdtp; | 
|  | char *p; | 
|  | # if __GNUC__ | 
|  | /* Avoid longjmp clobbering */ | 
|  | (void) &i; | 
|  | (void) &nextin; | 
|  | (void) &child; | 
|  | # endif | 
|  | #endif	/* __U_BOOT__ */ | 
|  |  | 
|  | nextin = 0; | 
|  | #ifndef __U_BOOT__ | 
|  | pi->pgrp = -1; | 
|  | #endif | 
|  |  | 
|  | /* Check if this is a simple builtin (not part of a pipe). | 
|  | * Builtins within pipes have to fork anyway, and are handled in | 
|  | * pseudo_exec.  "echo foo | read bar" doesn't work on bash, either. | 
|  | */ | 
|  | if (pi->num_progs == 1) child = & (pi->progs[0]); | 
|  | #ifndef __U_BOOT__ | 
|  | if (pi->num_progs == 1 && child->group && child->subshell == 0) { | 
|  | int squirrel[] = {-1, -1, -1}; | 
|  | int rcode; | 
|  | debug_printf("non-subshell grouping\n"); | 
|  | setup_redirects(child, squirrel); | 
|  | /* XXX could we merge code with following builtin case, | 
|  | * by creating a pseudo builtin that calls run_list_real? */ | 
|  | rcode = run_list_real(child->group); | 
|  | restore_redirects(squirrel); | 
|  | #else | 
|  | if (pi->num_progs == 1 && child->group) { | 
|  | int rcode; | 
|  | debug_printf("non-subshell grouping\n"); | 
|  | rcode = run_list_real(child->group); | 
|  | #endif | 
|  | return rcode; | 
|  | } else if (pi->num_progs == 1 && pi->progs[0].argv != NULL) { | 
|  | for (i=0; is_assignment(child->argv[i]); i++) { /* nothing */ } | 
|  | if (i!=0 && child->argv[i]==NULL) { | 
|  | /* assignments, but no command: set the local environment */ | 
|  | for (i=0; child->argv[i]!=NULL; i++) { | 
|  |  | 
|  | /* Ok, this case is tricky.  We have to decide if this is a | 
|  | * local variable, or an already exported variable.  If it is | 
|  | * already exported, we have to export the new value.  If it is | 
|  | * not exported, we need only set this as a local variable. | 
|  | * This junk is all to decide whether or not to export this | 
|  | * variable. */ | 
|  | int export_me=0; | 
|  | char *name, *value; | 
|  | name = xstrdup(child->argv[i]); | 
|  | debug_printf("Local environment set: %s\n", name); | 
|  | value = strchr(name, '='); | 
|  | if (value) | 
|  | *value=0; | 
|  | #ifndef __U_BOOT__ | 
|  | if ( get_local_var(name)) { | 
|  | export_me=1; | 
|  | } | 
|  | #endif | 
|  | free(name); | 
|  | p = insert_var_value(child->argv[i]); | 
|  | set_local_var(p, export_me); | 
|  | if (p != child->argv[i]) free(p); | 
|  | } | 
|  | return EXIT_SUCCESS;   /* don't worry about errors in set_local_var() yet */ | 
|  | } | 
|  | for (i = 0; is_assignment(child->argv[i]); i++) { | 
|  | p = insert_var_value(child->argv[i]); | 
|  | #ifndef __U_BOOT__ | 
|  | putenv(strdup(p)); | 
|  | #else | 
|  | set_local_var(p, 0); | 
|  | #endif | 
|  | if (p != child->argv[i]) { | 
|  | child->sp--; | 
|  | free(p); | 
|  | } | 
|  | } | 
|  | if (child->sp) { | 
|  | char * str = NULL; | 
|  |  | 
|  | str = make_string((child->argv + i)); | 
|  | parse_string_outer(str, FLAG_EXIT_FROM_LOOP | FLAG_REPARSING); | 
|  | free(str); | 
|  | return last_return_code; | 
|  | } | 
|  | #ifndef __U_BOOT__ | 
|  | for (x = bltins; x->cmd; x++) { | 
|  | if (strcmp(child->argv[i], x->cmd) == 0 ) { | 
|  | int squirrel[] = {-1, -1, -1}; | 
|  | int rcode; | 
|  | if (x->function == builtin_exec && child->argv[i+1]==NULL) { | 
|  | debug_printf("magic exec\n"); | 
|  | setup_redirects(child,NULL); | 
|  | return EXIT_SUCCESS; | 
|  | } | 
|  | debug_printf("builtin inline %s\n", child->argv[0]); | 
|  | /* XXX setup_redirects acts on file descriptors, not FILEs. | 
|  | * This is perfect for work that comes after exec(). | 
|  | * Is it really safe for inline use?  Experimentally, | 
|  | * things seem to work with glibc. */ | 
|  | setup_redirects(child, squirrel); | 
|  | #else | 
|  | /* check ";", because ,example , argv consist from | 
|  | * "help;flinfo" must not execute | 
|  | */ | 
|  | if (strchr(child->argv[i], ';')) { | 
|  | printf ("Unknown command '%s' - try 'help' or use 'run' command\n", | 
|  | child->argv[i]); | 
|  | return -1; | 
|  | } | 
|  | /* Look up command in command table */ | 
|  |  | 
|  |  | 
|  | if ((cmdtp = find_cmd(child->argv[i])) == NULL) { | 
|  | printf ("Unknown command '%s' - try 'help'\n", child->argv[i]); | 
|  | return -1;	/* give up after bad command */ | 
|  | } else { | 
|  | int rcode; | 
|  | #if defined(CONFIG_CMD_BOOTD) | 
|  | /* avoid "bootd" recursion */ | 
|  | if (cmdtp->cmd == do_bootd) { | 
|  | if (flag & CMD_FLAG_BOOTD) { | 
|  | printf ("'bootd' recursion detected\n"); | 
|  | return -1; | 
|  | } | 
|  | else | 
|  | flag |= CMD_FLAG_BOOTD; | 
|  | } | 
|  | #endif | 
|  | /* found - check max args */ | 
|  | if ((child->argc - i) > cmdtp->maxargs) | 
|  | return cmd_usage(cmdtp); | 
|  | #endif | 
|  | child->argv+=i;  /* XXX horrible hack */ | 
|  | #ifndef __U_BOOT__ | 
|  | rcode = x->function(child); | 
|  | #else | 
|  | /* OK - call function to do the command */ | 
|  |  | 
|  | rcode = (cmdtp->cmd) | 
|  | (cmdtp, flag,child->argc-i,&child->argv[i]); | 
|  | if ( !cmdtp->repeatable ) | 
|  | flag_repeat = 0; | 
|  |  | 
|  |  | 
|  | #endif | 
|  | child->argv-=i;  /* XXX restore hack so free() can work right */ | 
|  | #ifndef __U_BOOT__ | 
|  |  | 
|  | restore_redirects(squirrel); | 
|  | #endif | 
|  |  | 
|  | return rcode; | 
|  | } | 
|  | } | 
|  | #ifndef __U_BOOT__ | 
|  | } | 
|  |  | 
|  | for (i = 0; i < pi->num_progs; i++) { | 
|  | child = & (pi->progs[i]); | 
|  |  | 
|  | /* pipes are inserted between pairs of commands */ | 
|  | if ((i + 1) < pi->num_progs) { | 
|  | if (pipe(pipefds)<0) perror_msg_and_die("pipe"); | 
|  | nextout = pipefds[1]; | 
|  | } else { | 
|  | nextout=1; | 
|  | pipefds[0] = -1; | 
|  | } | 
|  |  | 
|  | /* XXX test for failed fork()? */ | 
|  | if (!(child->pid = fork())) { | 
|  | /* Set the handling for job control signals back to the default.  */ | 
|  | signal(SIGINT, SIG_DFL); | 
|  | signal(SIGQUIT, SIG_DFL); | 
|  | signal(SIGTERM, SIG_DFL); | 
|  | signal(SIGTSTP, SIG_DFL); | 
|  | signal(SIGTTIN, SIG_DFL); | 
|  | signal(SIGTTOU, SIG_DFL); | 
|  | signal(SIGCHLD, SIG_DFL); | 
|  |  | 
|  | close_all(); | 
|  |  | 
|  | if (nextin != 0) { | 
|  | dup2(nextin, 0); | 
|  | close(nextin); | 
|  | } | 
|  | if (nextout != 1) { | 
|  | dup2(nextout, 1); | 
|  | close(nextout); | 
|  | } | 
|  | if (pipefds[0]!=-1) { | 
|  | close(pipefds[0]);  /* opposite end of our output pipe */ | 
|  | } | 
|  |  | 
|  | /* Like bash, explicit redirects override pipes, | 
|  | * and the pipe fd is available for dup'ing. */ | 
|  | setup_redirects(child,NULL); | 
|  |  | 
|  | if (interactive && pi->followup!=PIPE_BG) { | 
|  | /* If we (the child) win the race, put ourselves in the process | 
|  | * group whose leader is the first process in this pipe. */ | 
|  | if (pi->pgrp < 0) { | 
|  | pi->pgrp = getpid(); | 
|  | } | 
|  | if (setpgid(0, pi->pgrp) == 0) { | 
|  | tcsetpgrp(2, pi->pgrp); | 
|  | } | 
|  | } | 
|  |  | 
|  | pseudo_exec(child); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* put our child in the process group whose leader is the | 
|  | first process in this pipe */ | 
|  | if (pi->pgrp < 0) { | 
|  | pi->pgrp = child->pid; | 
|  | } | 
|  | /* Don't check for errors.  The child may be dead already, | 
|  | * in which case setpgid returns error code EACCES. */ | 
|  | setpgid(child->pid, pi->pgrp); | 
|  |  | 
|  | if (nextin != 0) | 
|  | close(nextin); | 
|  | if (nextout != 1) | 
|  | close(nextout); | 
|  |  | 
|  | /* If there isn't another process, nextin is garbage | 
|  | but it doesn't matter */ | 
|  | nextin = pipefds[0]; | 
|  | } | 
|  | #endif | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static int run_list_real(struct pipe *pi) | 
|  | { | 
|  | char *save_name = NULL; | 
|  | char **list = NULL; | 
|  | char **save_list = NULL; | 
|  | struct pipe *rpipe; | 
|  | int flag_rep = 0; | 
|  | #ifndef __U_BOOT__ | 
|  | int save_num_progs; | 
|  | #endif | 
|  | int rcode=0, flag_skip=1; | 
|  | int flag_restore = 0; | 
|  | int if_code=0, next_if_code=0;  /* need double-buffer to handle elif */ | 
|  | reserved_style rmode, skip_more_in_this_rmode=RES_XXXX; | 
|  | /* check syntax for "for" */ | 
|  | for (rpipe = pi; rpipe; rpipe = rpipe->next) { | 
|  | if ((rpipe->r_mode == RES_IN || | 
|  | rpipe->r_mode == RES_FOR) && | 
|  | (rpipe->next == NULL)) { | 
|  | syntax(); | 
|  | #ifdef __U_BOOT__ | 
|  | flag_repeat = 0; | 
|  | #endif | 
|  | return 1; | 
|  | } | 
|  | if ((rpipe->r_mode == RES_IN && | 
|  | (rpipe->next->r_mode == RES_IN && | 
|  | rpipe->next->progs->argv != NULL))|| | 
|  | (rpipe->r_mode == RES_FOR && | 
|  | rpipe->next->r_mode != RES_IN)) { | 
|  | syntax(); | 
|  | #ifdef __U_BOOT__ | 
|  | flag_repeat = 0; | 
|  | #endif | 
|  | return 1; | 
|  | } | 
|  | } | 
|  | for (; pi; pi = (flag_restore != 0) ? rpipe : pi->next) { | 
|  | if (pi->r_mode == RES_WHILE || pi->r_mode == RES_UNTIL || | 
|  | pi->r_mode == RES_FOR) { | 
|  | #ifdef __U_BOOT__ | 
|  | /* check Ctrl-C */ | 
|  | ctrlc(); | 
|  | if ((had_ctrlc())) { | 
|  | return 1; | 
|  | } | 
|  | #endif | 
|  | flag_restore = 0; | 
|  | if (!rpipe) { | 
|  | flag_rep = 0; | 
|  | rpipe = pi; | 
|  | } | 
|  | } | 
|  | rmode = pi->r_mode; | 
|  | debug_printf("rmode=%d  if_code=%d  next_if_code=%d skip_more=%d\n", rmode, if_code, next_if_code, skip_more_in_this_rmode); | 
|  | if (rmode == skip_more_in_this_rmode && flag_skip) { | 
|  | if (pi->followup == PIPE_SEQ) flag_skip=0; | 
|  | continue; | 
|  | } | 
|  | flag_skip = 1; | 
|  | skip_more_in_this_rmode = RES_XXXX; | 
|  | if (rmode == RES_THEN || rmode == RES_ELSE) if_code = next_if_code; | 
|  | if (rmode == RES_THEN &&  if_code) continue; | 
|  | if (rmode == RES_ELSE && !if_code) continue; | 
|  | if (rmode == RES_ELIF && !if_code) break; | 
|  | if (rmode == RES_FOR && pi->num_progs) { | 
|  | if (!list) { | 
|  | /* if no variable values after "in" we skip "for" */ | 
|  | if (!pi->next->progs->argv) continue; | 
|  | /* create list of variable values */ | 
|  | list = make_list_in(pi->next->progs->argv, | 
|  | pi->progs->argv[0]); | 
|  | save_list = list; | 
|  | save_name = pi->progs->argv[0]; | 
|  | pi->progs->argv[0] = NULL; | 
|  | flag_rep = 1; | 
|  | } | 
|  | if (!(*list)) { | 
|  | free(pi->progs->argv[0]); | 
|  | free(save_list); | 
|  | list = NULL; | 
|  | flag_rep = 0; | 
|  | pi->progs->argv[0] = save_name; | 
|  | #ifndef __U_BOOT__ | 
|  | pi->progs->glob_result.gl_pathv[0] = | 
|  | pi->progs->argv[0]; | 
|  | #endif | 
|  | continue; | 
|  | } else { | 
|  | /* insert new value from list for variable */ | 
|  | if (pi->progs->argv[0]) | 
|  | free(pi->progs->argv[0]); | 
|  | pi->progs->argv[0] = *list++; | 
|  | #ifndef __U_BOOT__ | 
|  | pi->progs->glob_result.gl_pathv[0] = | 
|  | pi->progs->argv[0]; | 
|  | #endif | 
|  | } | 
|  | } | 
|  | if (rmode == RES_IN) continue; | 
|  | if (rmode == RES_DO) { | 
|  | if (!flag_rep) continue; | 
|  | } | 
|  | if ((rmode == RES_DONE)) { | 
|  | if (flag_rep) { | 
|  | flag_restore = 1; | 
|  | } else { | 
|  | rpipe = NULL; | 
|  | } | 
|  | } | 
|  | if (pi->num_progs == 0) continue; | 
|  | #ifndef __U_BOOT__ | 
|  | save_num_progs = pi->num_progs; /* save number of programs */ | 
|  | #endif | 
|  | rcode = run_pipe_real(pi); | 
|  | debug_printf("run_pipe_real returned %d\n",rcode); | 
|  | #ifndef __U_BOOT__ | 
|  | if (rcode!=-1) { | 
|  | /* We only ran a builtin: rcode was set by the return value | 
|  | * of run_pipe_real(), and we don't need to wait for anything. */ | 
|  | } else if (pi->followup==PIPE_BG) { | 
|  | /* XXX check bash's behavior with nontrivial pipes */ | 
|  | /* XXX compute jobid */ | 
|  | /* XXX what does bash do with attempts to background builtins? */ | 
|  | insert_bg_job(pi); | 
|  | rcode = EXIT_SUCCESS; | 
|  | } else { | 
|  | if (interactive) { | 
|  | /* move the new process group into the foreground */ | 
|  | if (tcsetpgrp(shell_terminal, pi->pgrp) && errno != ENOTTY) | 
|  | perror_msg("tcsetpgrp-3"); | 
|  | rcode = checkjobs(pi); | 
|  | /* move the shell to the foreground */ | 
|  | if (tcsetpgrp(shell_terminal, getpgid(0)) && errno != ENOTTY) | 
|  | perror_msg("tcsetpgrp-4"); | 
|  | } else { | 
|  | rcode = checkjobs(pi); | 
|  | } | 
|  | debug_printf("checkjobs returned %d\n",rcode); | 
|  | } | 
|  | last_return_code=rcode; | 
|  | #else | 
|  | if (rcode < -1) { | 
|  | last_return_code = -rcode - 2; | 
|  | return -2;	/* exit */ | 
|  | } | 
|  | last_return_code=(rcode == 0) ? 0 : 1; | 
|  | #endif | 
|  | #ifndef __U_BOOT__ | 
|  | pi->num_progs = save_num_progs; /* restore number of programs */ | 
|  | #endif | 
|  | if ( rmode == RES_IF || rmode == RES_ELIF ) | 
|  | next_if_code=rcode;  /* can be overwritten a number of times */ | 
|  | if (rmode == RES_WHILE) | 
|  | flag_rep = !last_return_code; | 
|  | if (rmode == RES_UNTIL) | 
|  | flag_rep = last_return_code; | 
|  | if ( (rcode==EXIT_SUCCESS && pi->followup==PIPE_OR) || | 
|  | (rcode!=EXIT_SUCCESS && pi->followup==PIPE_AND) ) | 
|  | skip_more_in_this_rmode=rmode; | 
|  | #ifndef __U_BOOT__ | 
|  | checkjobs(NULL); | 
|  | #endif | 
|  | } | 
|  | return rcode; | 
|  | } | 
|  |  | 
|  | /* broken, of course, but OK for testing */ | 
|  | static char *indenter(int i) | 
|  | { | 
|  | static char blanks[]="                                    "; | 
|  | return &blanks[sizeof(blanks)-i-1]; | 
|  | } | 
|  |  | 
|  | /* return code is the exit status of the pipe */ | 
|  | static int free_pipe(struct pipe *pi, int indent) | 
|  | { | 
|  | char **p; | 
|  | struct child_prog *child; | 
|  | #ifndef __U_BOOT__ | 
|  | struct redir_struct *r, *rnext; | 
|  | #endif | 
|  | int a, i, ret_code=0; | 
|  | char *ind = indenter(indent); | 
|  |  | 
|  | #ifndef __U_BOOT__ | 
|  | if (pi->stopped_progs > 0) | 
|  | return ret_code; | 
|  | final_printf("%s run pipe: (pid %d)\n",ind,getpid()); | 
|  | #endif | 
|  | for (i=0; i<pi->num_progs; i++) { | 
|  | child = &pi->progs[i]; | 
|  | final_printf("%s  command %d:\n",ind,i); | 
|  | if (child->argv) { | 
|  | for (a=0,p=child->argv; *p; a++,p++) { | 
|  | final_printf("%s   argv[%d] = %s\n",ind,a,*p); | 
|  | } | 
|  | #ifndef __U_BOOT__ | 
|  | globfree(&child->glob_result); | 
|  | #else | 
|  | for (a = 0; a < child->argc; a++) { | 
|  | free(child->argv[a]); | 
|  | } | 
|  | free(child->argv); | 
|  | child->argc = 0; | 
|  | #endif | 
|  | child->argv=NULL; | 
|  | } else if (child->group) { | 
|  | #ifndef __U_BOOT__ | 
|  | final_printf("%s   begin group (subshell:%d)\n",ind, child->subshell); | 
|  | #endif | 
|  | ret_code = free_pipe_list(child->group,indent+3); | 
|  | final_printf("%s   end group\n",ind); | 
|  | } else { | 
|  | final_printf("%s   (nil)\n",ind); | 
|  | } | 
|  | #ifndef __U_BOOT__ | 
|  | for (r=child->redirects; r; r=rnext) { | 
|  | final_printf("%s   redirect %d%s", ind, r->fd, redir_table[r->type].descrip); | 
|  | if (r->dup == -1) { | 
|  | /* guard against the case >$FOO, where foo is unset or blank */ | 
|  | if (r->word.gl_pathv) { | 
|  | final_printf(" %s\n", *r->word.gl_pathv); | 
|  | globfree(&r->word); | 
|  | } | 
|  | } else { | 
|  | final_printf("&%d\n", r->dup); | 
|  | } | 
|  | rnext=r->next; | 
|  | free(r); | 
|  | } | 
|  | child->redirects=NULL; | 
|  | #endif | 
|  | } | 
|  | free(pi->progs);   /* children are an array, they get freed all at once */ | 
|  | pi->progs=NULL; | 
|  | return ret_code; | 
|  | } | 
|  |  | 
|  | static int free_pipe_list(struct pipe *head, int indent) | 
|  | { | 
|  | int rcode=0;   /* if list has no members */ | 
|  | struct pipe *pi, *next; | 
|  | char *ind = indenter(indent); | 
|  | for (pi=head; pi; pi=next) { | 
|  | final_printf("%s pipe reserved mode %d\n", ind, pi->r_mode); | 
|  | rcode = free_pipe(pi, indent); | 
|  | final_printf("%s pipe followup code %d\n", ind, pi->followup); | 
|  | next=pi->next; | 
|  | pi->next=NULL; | 
|  | free(pi); | 
|  | } | 
|  | return rcode; | 
|  | } | 
|  |  | 
|  | /* Select which version we will use */ | 
|  | static int run_list(struct pipe *pi) | 
|  | { | 
|  | int rcode=0; | 
|  | #ifndef __U_BOOT__ | 
|  | if (fake_mode==0) { | 
|  | #endif | 
|  | rcode = run_list_real(pi); | 
|  | #ifndef __U_BOOT__ | 
|  | } | 
|  | #endif | 
|  | /* free_pipe_list has the side effect of clearing memory | 
|  | * In the long run that function can be merged with run_list_real, | 
|  | * but doing that now would hobble the debugging effort. */ | 
|  | free_pipe_list(pi,0); | 
|  | return rcode; | 
|  | } | 
|  |  | 
|  | /* The API for glob is arguably broken.  This routine pushes a non-matching | 
|  | * string into the output structure, removing non-backslashed backslashes. | 
|  | * If someone can prove me wrong, by performing this function within the | 
|  | * original glob(3) api, feel free to rewrite this routine into oblivion. | 
|  | * Return code (0 vs. GLOB_NOSPACE) matches glob(3). | 
|  | * XXX broken if the last character is '\\', check that before calling. | 
|  | */ | 
|  | #ifndef __U_BOOT__ | 
|  | static int globhack(const char *src, int flags, glob_t *pglob) | 
|  | { | 
|  | int cnt=0, pathc; | 
|  | const char *s; | 
|  | char *dest; | 
|  | for (cnt=1, s=src; s && *s; s++) { | 
|  | if (*s == '\\') s++; | 
|  | cnt++; | 
|  | } | 
|  | dest = malloc(cnt); | 
|  | if (!dest) return GLOB_NOSPACE; | 
|  | if (!(flags & GLOB_APPEND)) { | 
|  | pglob->gl_pathv=NULL; | 
|  | pglob->gl_pathc=0; | 
|  | pglob->gl_offs=0; | 
|  | pglob->gl_offs=0; | 
|  | } | 
|  | pathc = ++pglob->gl_pathc; | 
|  | pglob->gl_pathv = realloc(pglob->gl_pathv, (pathc+1)*sizeof(*pglob->gl_pathv)); | 
|  | if (pglob->gl_pathv == NULL) return GLOB_NOSPACE; | 
|  | pglob->gl_pathv[pathc-1]=dest; | 
|  | pglob->gl_pathv[pathc]=NULL; | 
|  | for (s=src; s && *s; s++, dest++) { | 
|  | if (*s == '\\') s++; | 
|  | *dest = *s; | 
|  | } | 
|  | *dest='\0'; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* XXX broken if the last character is '\\', check that before calling */ | 
|  | static int glob_needed(const char *s) | 
|  | { | 
|  | for (; *s; s++) { | 
|  | if (*s == '\\') s++; | 
|  | if (strchr("*[?",*s)) return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #if 0 | 
|  | static void globprint(glob_t *pglob) | 
|  | { | 
|  | int i; | 
|  | debug_printf("glob_t at %p:\n", pglob); | 
|  | debug_printf("  gl_pathc=%d  gl_pathv=%p  gl_offs=%d  gl_flags=%d\n", | 
|  | pglob->gl_pathc, pglob->gl_pathv, pglob->gl_offs, pglob->gl_flags); | 
|  | for (i=0; i<pglob->gl_pathc; i++) | 
|  | debug_printf("pglob->gl_pathv[%d] = %p = %s\n", i, | 
|  | pglob->gl_pathv[i], pglob->gl_pathv[i]); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int xglob(o_string *dest, int flags, glob_t *pglob) | 
|  | { | 
|  | int gr; | 
|  |  | 
|  | /* short-circuit for null word */ | 
|  | /* we can code this better when the debug_printf's are gone */ | 
|  | if (dest->length == 0) { | 
|  | if (dest->nonnull) { | 
|  | /* bash man page calls this an "explicit" null */ | 
|  | gr = globhack(dest->data, flags, pglob); | 
|  | debug_printf("globhack returned %d\n",gr); | 
|  | } else { | 
|  | return 0; | 
|  | } | 
|  | } else if (glob_needed(dest->data)) { | 
|  | gr = glob(dest->data, flags, NULL, pglob); | 
|  | debug_printf("glob returned %d\n",gr); | 
|  | if (gr == GLOB_NOMATCH) { | 
|  | /* quote removal, or more accurately, backslash removal */ | 
|  | gr = globhack(dest->data, flags, pglob); | 
|  | debug_printf("globhack returned %d\n",gr); | 
|  | } | 
|  | } else { | 
|  | gr = globhack(dest->data, flags, pglob); | 
|  | debug_printf("globhack returned %d\n",gr); | 
|  | } | 
|  | if (gr == GLOB_NOSPACE) | 
|  | error_msg_and_die("out of memory during glob"); | 
|  | if (gr != 0) { /* GLOB_ABORTED ? */ | 
|  | error_msg("glob(3) error %d",gr); | 
|  | } | 
|  | /* globprint(glob_target); */ | 
|  | return gr; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #ifdef __U_BOOT__ | 
|  | static char *get_dollar_var(char ch); | 
|  | #endif | 
|  |  | 
|  | /* This is used to get/check local shell variables */ | 
|  | static char *get_local_var(const char *s) | 
|  | { | 
|  | struct variables *cur; | 
|  |  | 
|  | if (!s) | 
|  | return NULL; | 
|  |  | 
|  | #ifdef __U_BOOT__ | 
|  | if (*s == '$') | 
|  | return get_dollar_var(s[1]); | 
|  | #endif | 
|  |  | 
|  | for (cur = top_vars; cur; cur=cur->next) | 
|  | if(strcmp(cur->name, s)==0) | 
|  | return cur->value; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* This is used to set local shell variables | 
|  | flg_export==0 if only local (not exporting) variable | 
|  | flg_export==1 if "new" exporting environ | 
|  | flg_export>1  if current startup environ (not call putenv()) */ | 
|  | int set_local_var(const char *s, int flg_export) | 
|  | { | 
|  | char *name, *value; | 
|  | int result=0; | 
|  | struct variables *cur; | 
|  |  | 
|  | #ifdef __U_BOOT__ | 
|  | /* might be possible! */ | 
|  | if (!isalpha(*s)) | 
|  | return -1; | 
|  | #endif | 
|  |  | 
|  | name=strdup(s); | 
|  |  | 
|  | #ifdef __U_BOOT__ | 
|  | if (getenv(name) != NULL) { | 
|  | printf ("ERROR: " | 
|  | "There is a global environment variable with the same name.\n"); | 
|  | free(name); | 
|  | return -1; | 
|  | } | 
|  | #endif | 
|  | /* Assume when we enter this function that we are already in | 
|  | * NAME=VALUE format.  So the first order of business is to | 
|  | * split 's' on the '=' into 'name' and 'value' */ | 
|  | value = strchr(name, '='); | 
|  | if (value==0 && ++value==0) { | 
|  | free(name); | 
|  | return -1; | 
|  | } | 
|  | *value++ = 0; | 
|  |  | 
|  | for(cur = top_vars; cur; cur = cur->next) { | 
|  | if(strcmp(cur->name, name)==0) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if(cur) { | 
|  | if(strcmp(cur->value, value)==0) { | 
|  | if(flg_export>0 && cur->flg_export==0) | 
|  | cur->flg_export=flg_export; | 
|  | else | 
|  | result++; | 
|  | } else { | 
|  | if(cur->flg_read_only) { | 
|  | error_msg("%s: readonly variable", name); | 
|  | result = -1; | 
|  | } else { | 
|  | if(flg_export>0 || cur->flg_export>1) | 
|  | cur->flg_export=1; | 
|  | free(cur->value); | 
|  |  | 
|  | cur->value = strdup(value); | 
|  | } | 
|  | } | 
|  | } else { | 
|  | cur = malloc(sizeof(struct variables)); | 
|  | if(!cur) { | 
|  | result = -1; | 
|  | } else { | 
|  | cur->name = strdup(name); | 
|  | if(cur->name == 0) { | 
|  | free(cur); | 
|  | result = -1; | 
|  | } else { | 
|  | struct variables *bottom = top_vars; | 
|  | cur->value = strdup(value); | 
|  | cur->next = 0; | 
|  | cur->flg_export = flg_export; | 
|  | cur->flg_read_only = 0; | 
|  | while(bottom->next) bottom=bottom->next; | 
|  | bottom->next = cur; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifndef __U_BOOT__ | 
|  | if(result==0 && cur->flg_export==1) { | 
|  | *(value-1) = '='; | 
|  | result = putenv(name); | 
|  | } else { | 
|  | #endif | 
|  | free(name); | 
|  | #ifndef __U_BOOT__ | 
|  | if(result>0)            /* equivalent to previous set */ | 
|  | result = 0; | 
|  | } | 
|  | #endif | 
|  | return result; | 
|  | } | 
|  |  | 
|  | void unset_local_var(const char *name) | 
|  | { | 
|  | struct variables *cur; | 
|  |  | 
|  | if (name) { | 
|  | for (cur = top_vars; cur; cur=cur->next) { | 
|  | if(strcmp(cur->name, name)==0) | 
|  | break; | 
|  | } | 
|  | if(cur!=0) { | 
|  | struct variables *next = top_vars; | 
|  | if(cur->flg_read_only) { | 
|  | error_msg("%s: readonly variable", name); | 
|  | return; | 
|  | } else { | 
|  | #ifndef __U_BOOT__ | 
|  | if(cur->flg_export) | 
|  | unsetenv(cur->name); | 
|  | #endif | 
|  | free(cur->name); | 
|  | free(cur->value); | 
|  | while (next->next != cur) | 
|  | next = next->next; | 
|  | next->next = cur->next; | 
|  | } | 
|  | free(cur); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int is_assignment(const char *s) | 
|  | { | 
|  | if (s == NULL) | 
|  | return 0; | 
|  |  | 
|  | if (!isalpha(*s)) return 0; | 
|  | ++s; | 
|  | while(isalnum(*s) || *s=='_') ++s; | 
|  | return *s=='='; | 
|  | } | 
|  |  | 
|  | #ifndef __U_BOOT__ | 
|  | /* the src parameter allows us to peek forward to a possible &n syntax | 
|  | * for file descriptor duplication, e.g., "2>&1". | 
|  | * Return code is 0 normally, 1 if a syntax error is detected in src. | 
|  | * Resource errors (in xmalloc) cause the process to exit */ | 
|  | static int setup_redirect(struct p_context *ctx, int fd, redir_type style, | 
|  | struct in_str *input) | 
|  | { | 
|  | struct child_prog *child=ctx->child; | 
|  | struct redir_struct *redir = child->redirects; | 
|  | struct redir_struct *last_redir=NULL; | 
|  |  | 
|  | /* Create a new redir_struct and drop it onto the end of the linked list */ | 
|  | while(redir) { | 
|  | last_redir=redir; | 
|  | redir=redir->next; | 
|  | } | 
|  | redir = xmalloc(sizeof(struct redir_struct)); | 
|  | redir->next=NULL; | 
|  | redir->word.gl_pathv=NULL; | 
|  | if (last_redir) { | 
|  | last_redir->next=redir; | 
|  | } else { | 
|  | child->redirects=redir; | 
|  | } | 
|  |  | 
|  | redir->type=style; | 
|  | redir->fd= (fd==-1) ? redir_table[style].default_fd : fd ; | 
|  |  | 
|  | debug_printf("Redirect type %d%s\n", redir->fd, redir_table[style].descrip); | 
|  |  | 
|  | /* Check for a '2>&1' type redirect */ | 
|  | redir->dup = redirect_dup_num(input); | 
|  | if (redir->dup == -2) return 1;  /* syntax error */ | 
|  | if (redir->dup != -1) { | 
|  | /* Erik had a check here that the file descriptor in question | 
|  | * is legit; I postpone that to "run time" | 
|  | * A "-" representation of "close me" shows up as a -3 here */ | 
|  | debug_printf("Duplicating redirect '%d>&%d'\n", redir->fd, redir->dup); | 
|  | } else { | 
|  | /* We do _not_ try to open the file that src points to, | 
|  | * since we need to return and let src be expanded first. | 
|  | * Set ctx->pending_redirect, so we know what to do at the | 
|  | * end of the next parsed word. | 
|  | */ | 
|  | ctx->pending_redirect = redir; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | struct pipe *new_pipe(void) { | 
|  | struct pipe *pi; | 
|  | pi = xmalloc(sizeof(struct pipe)); | 
|  | pi->num_progs = 0; | 
|  | pi->progs = NULL; | 
|  | pi->next = NULL; | 
|  | pi->followup = 0;  /* invalid */ | 
|  | pi->r_mode = RES_NONE; | 
|  | return pi; | 
|  | } | 
|  |  | 
|  | static void initialize_context(struct p_context *ctx) | 
|  | { | 
|  | ctx->pipe=NULL; | 
|  | #ifndef __U_BOOT__ | 
|  | ctx->pending_redirect=NULL; | 
|  | #endif | 
|  | ctx->child=NULL; | 
|  | ctx->list_head=new_pipe(); | 
|  | ctx->pipe=ctx->list_head; | 
|  | ctx->w=RES_NONE; | 
|  | ctx->stack=NULL; | 
|  | #ifdef __U_BOOT__ | 
|  | ctx->old_flag=0; | 
|  | #endif | 
|  | done_command(ctx);   /* creates the memory for working child */ | 
|  | } | 
|  |  | 
|  | /* normal return is 0 | 
|  | * if a reserved word is found, and processed, return 1 | 
|  | * should handle if, then, elif, else, fi, for, while, until, do, done. | 
|  | * case, function, and select are obnoxious, save those for later. | 
|  | */ | 
|  | struct reserved_combo { | 
|  | char *literal; | 
|  | int code; | 
|  | long flag; | 
|  | }; | 
|  | /* Mostly a list of accepted follow-up reserved words. | 
|  | * FLAG_END means we are done with the sequence, and are ready | 
|  | * to turn the compound list into a command. | 
|  | * FLAG_START means the word must start a new compound list. | 
|  | */ | 
|  | static struct reserved_combo reserved_list[] = { | 
|  | { "if",    RES_IF,    FLAG_THEN | FLAG_START }, | 
|  | { "then",  RES_THEN,  FLAG_ELIF | FLAG_ELSE | FLAG_FI }, | 
|  | { "elif",  RES_ELIF,  FLAG_THEN }, | 
|  | { "else",  RES_ELSE,  FLAG_FI   }, | 
|  | { "fi",    RES_FI,    FLAG_END  }, | 
|  | { "for",   RES_FOR,   FLAG_IN   | FLAG_START }, | 
|  | { "while", RES_WHILE, FLAG_DO   | FLAG_START }, | 
|  | { "until", RES_UNTIL, FLAG_DO   | FLAG_START }, | 
|  | { "in",    RES_IN,    FLAG_DO   }, | 
|  | { "do",    RES_DO,    FLAG_DONE }, | 
|  | { "done",  RES_DONE,  FLAG_END  } | 
|  | }; | 
|  | #define NRES (sizeof(reserved_list)/sizeof(struct reserved_combo)) | 
|  |  | 
|  | int reserved_word(o_string *dest, struct p_context *ctx) | 
|  | { | 
|  | struct reserved_combo *r; | 
|  | for (r=reserved_list; | 
|  | r<reserved_list+NRES; r++) { | 
|  | if (strcmp(dest->data, r->literal) == 0) { | 
|  | debug_printf("found reserved word %s, code %d\n",r->literal,r->code); | 
|  | if (r->flag & FLAG_START) { | 
|  | struct p_context *new = xmalloc(sizeof(struct p_context)); | 
|  | debug_printf("push stack\n"); | 
|  | if (ctx->w == RES_IN || ctx->w == RES_FOR) { | 
|  | syntax(); | 
|  | free(new); | 
|  | ctx->w = RES_SNTX; | 
|  | b_reset(dest); | 
|  | return 1; | 
|  | } | 
|  | *new = *ctx;   /* physical copy */ | 
|  | initialize_context(ctx); | 
|  | ctx->stack=new; | 
|  | } else if ( ctx->w == RES_NONE || ! (ctx->old_flag & (1<<r->code))) { | 
|  | syntax(); | 
|  | ctx->w = RES_SNTX; | 
|  | b_reset(dest); | 
|  | return 1; | 
|  | } | 
|  | ctx->w=r->code; | 
|  | ctx->old_flag = r->flag; | 
|  | if (ctx->old_flag & FLAG_END) { | 
|  | struct p_context *old; | 
|  | debug_printf("pop stack\n"); | 
|  | done_pipe(ctx,PIPE_SEQ); | 
|  | old = ctx->stack; | 
|  | old->child->group = ctx->list_head; | 
|  | #ifndef __U_BOOT__ | 
|  | old->child->subshell = 0; | 
|  | #endif | 
|  | *ctx = *old;   /* physical copy */ | 
|  | free(old); | 
|  | } | 
|  | b_reset (dest); | 
|  | return 1; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* normal return is 0. | 
|  | * Syntax or xglob errors return 1. */ | 
|  | static int done_word(o_string *dest, struct p_context *ctx) | 
|  | { | 
|  | struct child_prog *child=ctx->child; | 
|  | #ifndef __U_BOOT__ | 
|  | glob_t *glob_target; | 
|  | int gr, flags = 0; | 
|  | #else | 
|  | char *str, *s; | 
|  | int argc, cnt; | 
|  | #endif | 
|  |  | 
|  | debug_printf("done_word: %s %p\n", dest->data, child); | 
|  | if (dest->length == 0 && !dest->nonnull) { | 
|  | debug_printf("  true null, ignored\n"); | 
|  | return 0; | 
|  | } | 
|  | #ifndef __U_BOOT__ | 
|  | if (ctx->pending_redirect) { | 
|  | glob_target = &ctx->pending_redirect->word; | 
|  | } else { | 
|  | #endif | 
|  | if (child->group) { | 
|  | syntax(); | 
|  | return 1;  /* syntax error, groups and arglists don't mix */ | 
|  | } | 
|  | if (!child->argv && (ctx->type & FLAG_PARSE_SEMICOLON)) { | 
|  | debug_printf("checking %s for reserved-ness\n",dest->data); | 
|  | if (reserved_word(dest,ctx)) return ctx->w==RES_SNTX; | 
|  | } | 
|  | #ifndef __U_BOOT__ | 
|  | glob_target = &child->glob_result; | 
|  | if (child->argv) flags |= GLOB_APPEND; | 
|  | #else | 
|  | for (cnt = 1, s = dest->data; s && *s; s++) { | 
|  | if (*s == '\\') s++; | 
|  | cnt++; | 
|  | } | 
|  | str = malloc(cnt); | 
|  | if (!str) return 1; | 
|  | if ( child->argv == NULL) { | 
|  | child->argc=0; | 
|  | } | 
|  | argc = ++child->argc; | 
|  | child->argv = realloc(child->argv, (argc+1)*sizeof(*child->argv)); | 
|  | if (child->argv == NULL) return 1; | 
|  | child->argv[argc-1]=str; | 
|  | child->argv[argc]=NULL; | 
|  | for (s = dest->data; s && *s; s++,str++) { | 
|  | if (*s == '\\') s++; | 
|  | *str = *s; | 
|  | } | 
|  | *str = '\0'; | 
|  | #endif | 
|  | #ifndef __U_BOOT__ | 
|  | } | 
|  | gr = xglob(dest, flags, glob_target); | 
|  | if (gr != 0) return 1; | 
|  | #endif | 
|  |  | 
|  | b_reset(dest); | 
|  | #ifndef __U_BOOT__ | 
|  | if (ctx->pending_redirect) { | 
|  | ctx->pending_redirect=NULL; | 
|  | if (glob_target->gl_pathc != 1) { | 
|  | error_msg("ambiguous redirect"); | 
|  | return 1; | 
|  | } | 
|  | } else { | 
|  | child->argv = glob_target->gl_pathv; | 
|  | } | 
|  | #endif | 
|  | if (ctx->w == RES_FOR) { | 
|  | done_word(dest,ctx); | 
|  | done_pipe(ctx,PIPE_SEQ); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* The only possible error here is out of memory, in which case | 
|  | * xmalloc exits. */ | 
|  | static int done_command(struct p_context *ctx) | 
|  | { | 
|  | /* The child is really already in the pipe structure, so | 
|  | * advance the pipe counter and make a new, null child. | 
|  | * Only real trickiness here is that the uncommitted | 
|  | * child structure, to which ctx->child points, is not | 
|  | * counted in pi->num_progs. */ | 
|  | struct pipe *pi=ctx->pipe; | 
|  | struct child_prog *prog=ctx->child; | 
|  |  | 
|  | if (prog && prog->group == NULL | 
|  | && prog->argv == NULL | 
|  | #ifndef __U_BOOT__ | 
|  | && prog->redirects == NULL) { | 
|  | #else | 
|  | ) { | 
|  | #endif | 
|  | debug_printf("done_command: skipping null command\n"); | 
|  | return 0; | 
|  | } else if (prog) { | 
|  | pi->num_progs++; | 
|  | debug_printf("done_command: num_progs incremented to %d\n",pi->num_progs); | 
|  | } else { | 
|  | debug_printf("done_command: initializing\n"); | 
|  | } | 
|  | pi->progs = xrealloc(pi->progs, sizeof(*pi->progs) * (pi->num_progs+1)); | 
|  |  | 
|  | prog = pi->progs + pi->num_progs; | 
|  | #ifndef __U_BOOT__ | 
|  | prog->redirects = NULL; | 
|  | #endif | 
|  | prog->argv = NULL; | 
|  | #ifndef __U_BOOT__ | 
|  | prog->is_stopped = 0; | 
|  | #endif | 
|  | prog->group = NULL; | 
|  | #ifndef __U_BOOT__ | 
|  | prog->glob_result.gl_pathv = NULL; | 
|  | prog->family = pi; | 
|  | #endif | 
|  | prog->sp = 0; | 
|  | ctx->child = prog; | 
|  | prog->type = ctx->type; | 
|  |  | 
|  | /* but ctx->pipe and ctx->list_head remain unchanged */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int done_pipe(struct p_context *ctx, pipe_style type) | 
|  | { | 
|  | struct pipe *new_p; | 
|  | done_command(ctx);  /* implicit closure of previous command */ | 
|  | debug_printf("done_pipe, type %d\n", type); | 
|  | ctx->pipe->followup = type; | 
|  | ctx->pipe->r_mode = ctx->w; | 
|  | new_p=new_pipe(); | 
|  | ctx->pipe->next = new_p; | 
|  | ctx->pipe = new_p; | 
|  | ctx->child = NULL; | 
|  | done_command(ctx);  /* set up new pipe to accept commands */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifndef __U_BOOT__ | 
|  | /* peek ahead in the in_str to find out if we have a "&n" construct, | 
|  | * as in "2>&1", that represents duplicating a file descriptor. | 
|  | * returns either -2 (syntax error), -1 (no &), or the number found. | 
|  | */ | 
|  | static int redirect_dup_num(struct in_str *input) | 
|  | { | 
|  | int ch, d=0, ok=0; | 
|  | ch = b_peek(input); | 
|  | if (ch != '&') return -1; | 
|  |  | 
|  | b_getch(input);  /* get the & */ | 
|  | ch=b_peek(input); | 
|  | if (ch == '-') { | 
|  | b_getch(input); | 
|  | return -3;  /* "-" represents "close me" */ | 
|  | } | 
|  | while (isdigit(ch)) { | 
|  | d = d*10+(ch-'0'); | 
|  | ok=1; | 
|  | b_getch(input); | 
|  | ch = b_peek(input); | 
|  | } | 
|  | if (ok) return d; | 
|  |  | 
|  | error_msg("ambiguous redirect"); | 
|  | return -2; | 
|  | } | 
|  |  | 
|  | /* If a redirect is immediately preceded by a number, that number is | 
|  | * supposed to tell which file descriptor to redirect.  This routine | 
|  | * looks for such preceding numbers.  In an ideal world this routine | 
|  | * needs to handle all the following classes of redirects... | 
|  | *     echo 2>foo     # redirects fd  2 to file "foo", nothing passed to echo | 
|  | *     echo 49>foo    # redirects fd 49 to file "foo", nothing passed to echo | 
|  | *     echo -2>foo    # redirects fd  1 to file "foo",    "-2" passed to echo | 
|  | *     echo 49x>foo   # redirects fd  1 to file "foo",   "49x" passed to echo | 
|  | * A -1 output from this program means no valid number was found, so the | 
|  | * caller should use the appropriate default for this redirection. | 
|  | */ | 
|  | static int redirect_opt_num(o_string *o) | 
|  | { | 
|  | int num; | 
|  |  | 
|  | if (o->length==0) return -1; | 
|  | for(num=0; num<o->length; num++) { | 
|  | if (!isdigit(*(o->data+num))) { | 
|  | return -1; | 
|  | } | 
|  | } | 
|  | /* reuse num (and save an int) */ | 
|  | num=atoi(o->data); | 
|  | b_reset(o); | 
|  | return num; | 
|  | } | 
|  |  | 
|  | FILE *generate_stream_from_list(struct pipe *head) | 
|  | { | 
|  | FILE *pf; | 
|  | #if 1 | 
|  | int pid, channel[2]; | 
|  | if (pipe(channel)<0) perror_msg_and_die("pipe"); | 
|  | pid=fork(); | 
|  | if (pid<0) { | 
|  | perror_msg_and_die("fork"); | 
|  | } else if (pid==0) { | 
|  | close(channel[0]); | 
|  | if (channel[1] != 1) { | 
|  | dup2(channel[1],1); | 
|  | close(channel[1]); | 
|  | } | 
|  | #if 0 | 
|  | #define SURROGATE "surrogate response" | 
|  | write(1,SURROGATE,sizeof(SURROGATE)); | 
|  | _exit(run_list(head)); | 
|  | #else | 
|  | _exit(run_list_real(head));   /* leaks memory */ | 
|  | #endif | 
|  | } | 
|  | debug_printf("forked child %d\n",pid); | 
|  | close(channel[1]); | 
|  | pf = fdopen(channel[0],"r"); | 
|  | debug_printf("pipe on FILE *%p\n",pf); | 
|  | #else | 
|  | free_pipe_list(head,0); | 
|  | pf=popen("echo surrogate response","r"); | 
|  | debug_printf("started fake pipe on FILE *%p\n",pf); | 
|  | #endif | 
|  | return pf; | 
|  | } | 
|  |  | 
|  | /* this version hacked for testing purposes */ | 
|  | /* return code is exit status of the process that is run. */ | 
|  | static int process_command_subs(o_string *dest, struct p_context *ctx, struct in_str *input, int subst_end) | 
|  | { | 
|  | int retcode; | 
|  | o_string result=NULL_O_STRING; | 
|  | struct p_context inner; | 
|  | FILE *p; | 
|  | struct in_str pipe_str; | 
|  | initialize_context(&inner); | 
|  |  | 
|  | /* recursion to generate command */ | 
|  | retcode = parse_stream(&result, &inner, input, subst_end); | 
|  | if (retcode != 0) return retcode;  /* syntax error or EOF */ | 
|  | done_word(&result, &inner); | 
|  | done_pipe(&inner, PIPE_SEQ); | 
|  | b_free(&result); | 
|  |  | 
|  | p=generate_stream_from_list(inner.list_head); | 
|  | if (p==NULL) return 1; | 
|  | mark_open(fileno(p)); | 
|  | setup_file_in_str(&pipe_str, p); | 
|  |  | 
|  | /* now send results of command back into original context */ | 
|  | retcode = parse_stream(dest, ctx, &pipe_str, '\0'); | 
|  | /* XXX In case of a syntax error, should we try to kill the child? | 
|  | * That would be tough to do right, so just read until EOF. */ | 
|  | if (retcode == 1) { | 
|  | while (b_getch(&pipe_str)!=EOF) { /* discard */ }; | 
|  | } | 
|  |  | 
|  | debug_printf("done reading from pipe, pclose()ing\n"); | 
|  | /* This is the step that wait()s for the child.  Should be pretty | 
|  | * safe, since we just read an EOF from its stdout.  We could try | 
|  | * to better, by using wait(), and keeping track of background jobs | 
|  | * at the same time.  That would be a lot of work, and contrary | 
|  | * to the KISS philosophy of this program. */ | 
|  | mark_closed(fileno(p)); | 
|  | retcode=pclose(p); | 
|  | free_pipe_list(inner.list_head,0); | 
|  | debug_printf("pclosed, retcode=%d\n",retcode); | 
|  | /* XXX this process fails to trim a single trailing newline */ | 
|  | return retcode; | 
|  | } | 
|  |  | 
|  | static int parse_group(o_string *dest, struct p_context *ctx, | 
|  | struct in_str *input, int ch) | 
|  | { | 
|  | int rcode, endch=0; | 
|  | struct p_context sub; | 
|  | struct child_prog *child = ctx->child; | 
|  | if (child->argv) { | 
|  | syntax(); | 
|  | return 1;  /* syntax error, groups and arglists don't mix */ | 
|  | } | 
|  | initialize_context(&sub); | 
|  | switch(ch) { | 
|  | case '(': endch=')'; child->subshell=1; break; | 
|  | case '{': endch='}'; break; | 
|  | default: syntax();   /* really logic error */ | 
|  | } | 
|  | rcode=parse_stream(dest,&sub,input,endch); | 
|  | done_word(dest,&sub); /* finish off the final word in the subcontext */ | 
|  | done_pipe(&sub, PIPE_SEQ);  /* and the final command there, too */ | 
|  | child->group = sub.list_head; | 
|  | return rcode; | 
|  | /* child remains "open", available for possible redirects */ | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* basically useful version until someone wants to get fancier, | 
|  | * see the bash man page under "Parameter Expansion" */ | 
|  | static char *lookup_param(char *src) | 
|  | { | 
|  | char *p; | 
|  |  | 
|  | if (!src) | 
|  | return NULL; | 
|  |  | 
|  | p = getenv(src); | 
|  | if (!p) | 
|  | p = get_local_var(src); | 
|  |  | 
|  | return p; | 
|  | } | 
|  |  | 
|  | #ifdef __U_BOOT__ | 
|  | static char *get_dollar_var(char ch) | 
|  | { | 
|  | static char buf[40]; | 
|  |  | 
|  | buf[0] = '\0'; | 
|  | switch (ch) { | 
|  | case '?': | 
|  | sprintf(buf, "%u", (unsigned int)last_return_code); | 
|  | break; | 
|  | default: | 
|  | return NULL; | 
|  | } | 
|  | return buf; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* return code: 0 for OK, 1 for syntax error */ | 
|  | static int handle_dollar(o_string *dest, struct p_context *ctx, struct in_str *input) | 
|  | { | 
|  | #ifndef __U_BOOT__ | 
|  | int i, advance=0; | 
|  | #else | 
|  | int advance=0; | 
|  | #endif | 
|  | #ifndef __U_BOOT__ | 
|  | char sep[]=" "; | 
|  | #endif | 
|  | int ch = input->peek(input);  /* first character after the $ */ | 
|  | debug_printf("handle_dollar: ch=%c\n",ch); | 
|  | if (isalpha(ch)) { | 
|  | b_addchr(dest, SPECIAL_VAR_SYMBOL); | 
|  | ctx->child->sp++; | 
|  | while(ch=b_peek(input),isalnum(ch) || ch=='_') { | 
|  | b_getch(input); | 
|  | b_addchr(dest,ch); | 
|  | } | 
|  | b_addchr(dest, SPECIAL_VAR_SYMBOL); | 
|  | #ifndef __U_BOOT__ | 
|  | } else if (isdigit(ch)) { | 
|  | i = ch-'0';  /* XXX is $0 special? */ | 
|  | if (i<global_argc) { | 
|  | parse_string(dest, ctx, global_argv[i]); /* recursion */ | 
|  | } | 
|  | advance = 1; | 
|  | #endif | 
|  | } else switch (ch) { | 
|  | #ifndef __U_BOOT__ | 
|  | case '$': | 
|  | b_adduint(dest,getpid()); | 
|  | advance = 1; | 
|  | break; | 
|  | case '!': | 
|  | if (last_bg_pid > 0) b_adduint(dest, last_bg_pid); | 
|  | advance = 1; | 
|  | break; | 
|  | #endif | 
|  | case '?': | 
|  | #ifndef __U_BOOT__ | 
|  | b_adduint(dest,last_return_code); | 
|  | #else | 
|  | ctx->child->sp++; | 
|  | b_addchr(dest, SPECIAL_VAR_SYMBOL); | 
|  | b_addchr(dest, '$'); | 
|  | b_addchr(dest, '?'); | 
|  | b_addchr(dest, SPECIAL_VAR_SYMBOL); | 
|  | #endif | 
|  | advance = 1; | 
|  | break; | 
|  | #ifndef __U_BOOT__ | 
|  | case '#': | 
|  | b_adduint(dest,global_argc ? global_argc-1 : 0); | 
|  | advance = 1; | 
|  | break; | 
|  | #endif | 
|  | case '{': | 
|  | b_addchr(dest, SPECIAL_VAR_SYMBOL); | 
|  | ctx->child->sp++; | 
|  | b_getch(input); | 
|  | /* XXX maybe someone will try to escape the '}' */ | 
|  | while(ch=b_getch(input),ch!=EOF && ch!='}') { | 
|  | b_addchr(dest,ch); | 
|  | } | 
|  | if (ch != '}') { | 
|  | syntax(); | 
|  | return 1; | 
|  | } | 
|  | b_addchr(dest, SPECIAL_VAR_SYMBOL); | 
|  | break; | 
|  | #ifndef __U_BOOT__ | 
|  | case '(': | 
|  | b_getch(input); | 
|  | process_command_subs(dest, ctx, input, ')'); | 
|  | break; | 
|  | case '*': | 
|  | sep[0]=ifs[0]; | 
|  | for (i=1; i<global_argc; i++) { | 
|  | parse_string(dest, ctx, global_argv[i]); | 
|  | if (i+1 < global_argc) parse_string(dest, ctx, sep); | 
|  | } | 
|  | break; | 
|  | case '@': | 
|  | case '-': | 
|  | case '_': | 
|  | /* still unhandled, but should be eventually */ | 
|  | error_msg("unhandled syntax: $%c",ch); | 
|  | return 1; | 
|  | break; | 
|  | #endif | 
|  | default: | 
|  | b_addqchr(dest,'$',dest->quote); | 
|  | } | 
|  | /* Eat the character if the flag was set.  If the compiler | 
|  | * is smart enough, we could substitute "b_getch(input);" | 
|  | * for all the "advance = 1;" above, and also end up with | 
|  | * a nice size-optimized program.  Hah!  That'll be the day. | 
|  | */ | 
|  | if (advance) b_getch(input); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifndef __U_BOOT__ | 
|  | int parse_string(o_string *dest, struct p_context *ctx, const char *src) | 
|  | { | 
|  | struct in_str foo; | 
|  | setup_string_in_str(&foo, src); | 
|  | return parse_stream(dest, ctx, &foo, '\0'); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* return code is 0 for normal exit, 1 for syntax error */ | 
|  | int parse_stream(o_string *dest, struct p_context *ctx, | 
|  | struct in_str *input, int end_trigger) | 
|  | { | 
|  | unsigned int ch, m; | 
|  | #ifndef __U_BOOT__ | 
|  | int redir_fd; | 
|  | redir_type redir_style; | 
|  | #endif | 
|  | int next; | 
|  |  | 
|  | /* Only double-quote state is handled in the state variable dest->quote. | 
|  | * A single-quote triggers a bypass of the main loop until its mate is | 
|  | * found.  When recursing, quote state is passed in via dest->quote. */ | 
|  |  | 
|  | debug_printf("parse_stream, end_trigger=%d\n",end_trigger); | 
|  | while ((ch=b_getch(input))!=EOF) { | 
|  | m = map[ch]; | 
|  | #ifdef __U_BOOT__ | 
|  | if (input->__promptme == 0) return 1; | 
|  | #endif | 
|  | next = (ch == '\n') ? 0 : b_peek(input); | 
|  |  | 
|  | debug_printf("parse_stream: ch=%c (%d) m=%d quote=%d - %c\n", | 
|  | ch >= ' ' ? ch : '.', ch, m, | 
|  | dest->quote, ctx->stack == NULL ? '*' : '.'); | 
|  |  | 
|  | if (m==0 || ((m==1 || m==2) && dest->quote)) { | 
|  | b_addqchr(dest, ch, dest->quote); | 
|  | } else { | 
|  | if (m==2) {  /* unquoted IFS */ | 
|  | if (done_word(dest, ctx)) { | 
|  | return 1; | 
|  | } | 
|  | /* If we aren't performing a substitution, treat a newline as a | 
|  | * command separator.  */ | 
|  | if (end_trigger != '\0' && ch=='\n') | 
|  | done_pipe(ctx,PIPE_SEQ); | 
|  | } | 
|  | if (ch == end_trigger && !dest->quote && ctx->w==RES_NONE) { | 
|  | debug_printf("leaving parse_stream (triggered)\n"); | 
|  | return 0; | 
|  | } | 
|  | #if 0 | 
|  | if (ch=='\n') { | 
|  | /* Yahoo!  Time to run with it! */ | 
|  | done_pipe(ctx,PIPE_SEQ); | 
|  | run_list(ctx->list_head); | 
|  | initialize_context(ctx); | 
|  | } | 
|  | #endif | 
|  | if (m!=2) switch (ch) { | 
|  | case '#': | 
|  | if (dest->length == 0 && !dest->quote) { | 
|  | while(ch=b_peek(input),ch!=EOF && ch!='\n') { b_getch(input); } | 
|  | } else { | 
|  | b_addqchr(dest, ch, dest->quote); | 
|  | } | 
|  | break; | 
|  | case '\\': | 
|  | if (next == EOF) { | 
|  | syntax(); | 
|  | return 1; | 
|  | } | 
|  | b_addqchr(dest, '\\', dest->quote); | 
|  | b_addqchr(dest, b_getch(input), dest->quote); | 
|  | break; | 
|  | case '$': | 
|  | if (handle_dollar(dest, ctx, input)!=0) return 1; | 
|  | break; | 
|  | case '\'': | 
|  | dest->nonnull = 1; | 
|  | while(ch=b_getch(input),ch!=EOF && ch!='\'') { | 
|  | #ifdef __U_BOOT__ | 
|  | if(input->__promptme == 0) return 1; | 
|  | #endif | 
|  | b_addchr(dest,ch); | 
|  | } | 
|  | if (ch==EOF) { | 
|  | syntax(); | 
|  | return 1; | 
|  | } | 
|  | break; | 
|  | case '"': | 
|  | dest->nonnull = 1; | 
|  | dest->quote = !dest->quote; | 
|  | break; | 
|  | #ifndef __U_BOOT__ | 
|  | case '`': | 
|  | process_command_subs(dest, ctx, input, '`'); | 
|  | break; | 
|  | case '>': | 
|  | redir_fd = redirect_opt_num(dest); | 
|  | done_word(dest, ctx); | 
|  | redir_style=REDIRECT_OVERWRITE; | 
|  | if (next == '>') { | 
|  | redir_style=REDIRECT_APPEND; | 
|  | b_getch(input); | 
|  | } else if (next == '(') { | 
|  | syntax();   /* until we support >(list) Process Substitution */ | 
|  | return 1; | 
|  | } | 
|  | setup_redirect(ctx, redir_fd, redir_style, input); | 
|  | break; | 
|  | case '<': | 
|  | redir_fd = redirect_opt_num(dest); | 
|  | done_word(dest, ctx); | 
|  | redir_style=REDIRECT_INPUT; | 
|  | if (next == '<') { | 
|  | redir_style=REDIRECT_HEREIS; | 
|  | b_getch(input); | 
|  | } else if (next == '>') { | 
|  | redir_style=REDIRECT_IO; | 
|  | b_getch(input); | 
|  | } else if (next == '(') { | 
|  | syntax();   /* until we support <(list) Process Substitution */ | 
|  | return 1; | 
|  | } | 
|  | setup_redirect(ctx, redir_fd, redir_style, input); | 
|  | break; | 
|  | #endif | 
|  | case ';': | 
|  | done_word(dest, ctx); | 
|  | done_pipe(ctx,PIPE_SEQ); | 
|  | break; | 
|  | case '&': | 
|  | done_word(dest, ctx); | 
|  | if (next=='&') { | 
|  | b_getch(input); | 
|  | done_pipe(ctx,PIPE_AND); | 
|  | } else { | 
|  | #ifndef __U_BOOT__ | 
|  | done_pipe(ctx,PIPE_BG); | 
|  | #else | 
|  | syntax_err(); | 
|  | return 1; | 
|  | #endif | 
|  | } | 
|  | break; | 
|  | case '|': | 
|  | done_word(dest, ctx); | 
|  | if (next=='|') { | 
|  | b_getch(input); | 
|  | done_pipe(ctx,PIPE_OR); | 
|  | } else { | 
|  | /* we could pick up a file descriptor choice here | 
|  | * with redirect_opt_num(), but bash doesn't do it. | 
|  | * "echo foo 2| cat" yields "foo 2". */ | 
|  | #ifndef __U_BOOT__ | 
|  | done_command(ctx); | 
|  | #else | 
|  | syntax_err(); | 
|  | return 1; | 
|  | #endif | 
|  | } | 
|  | break; | 
|  | #ifndef __U_BOOT__ | 
|  | case '(': | 
|  | case '{': | 
|  | if (parse_group(dest, ctx, input, ch)!=0) return 1; | 
|  | break; | 
|  | case ')': | 
|  | case '}': | 
|  | syntax();   /* Proper use of this character caught by end_trigger */ | 
|  | return 1; | 
|  | break; | 
|  | #endif | 
|  | default: | 
|  | syntax();   /* this is really an internal logic error */ | 
|  | return 1; | 
|  | } | 
|  | } | 
|  | } | 
|  | /* complain if quote?  No, maybe we just finished a command substitution | 
|  | * that was quoted.  Example: | 
|  | * $ echo "`cat foo` plus more" | 
|  | * and we just got the EOF generated by the subshell that ran "cat foo" | 
|  | * The only real complaint is if we got an EOF when end_trigger != '\0', | 
|  | * that is, we were really supposed to get end_trigger, and never got | 
|  | * one before the EOF.  Can't use the standard "syntax error" return code, | 
|  | * so that parse_stream_outer can distinguish the EOF and exit smoothly. */ | 
|  | debug_printf("leaving parse_stream (EOF)\n"); | 
|  | if (end_trigger != '\0') return -1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void mapset(const unsigned char *set, int code) | 
|  | { | 
|  | const unsigned char *s; | 
|  | for (s=set; *s; s++) map[*s] = code; | 
|  | } | 
|  |  | 
|  | void update_ifs_map(void) | 
|  | { | 
|  | /* char *ifs and char map[256] are both globals. */ | 
|  | ifs = (uchar *)getenv("IFS"); | 
|  | if (ifs == NULL) ifs=(uchar *)" \t\n"; | 
|  | /* Precompute a list of 'flow through' behavior so it can be treated | 
|  | * quickly up front.  Computation is necessary because of IFS. | 
|  | * Special case handling of IFS == " \t\n" is not implemented. | 
|  | * The map[] array only really needs two bits each, and on most machines | 
|  | * that would be faster because of the reduced L1 cache footprint. | 
|  | */ | 
|  | memset(map,0,sizeof(map)); /* most characters flow through always */ | 
|  | #ifndef __U_BOOT__ | 
|  | mapset((uchar *)"\\$'\"`", 3);      /* never flow through */ | 
|  | mapset((uchar *)"<>;&|(){}#", 1);   /* flow through if quoted */ | 
|  | #else | 
|  | mapset((uchar *)"\\$'\"", 3);       /* never flow through */ | 
|  | mapset((uchar *)";&|#", 1);         /* flow through if quoted */ | 
|  | #endif | 
|  | mapset(ifs, 2);            /* also flow through if quoted */ | 
|  | } | 
|  |  | 
|  | /* most recursion does not come through here, the exeception is | 
|  | * from builtin_source() */ | 
|  | int parse_stream_outer(struct in_str *inp, int flag) | 
|  | { | 
|  |  | 
|  | struct p_context ctx; | 
|  | o_string temp=NULL_O_STRING; | 
|  | int rcode; | 
|  | #ifdef __U_BOOT__ | 
|  | int code = 0; | 
|  | #endif | 
|  | do { | 
|  | ctx.type = flag; | 
|  | initialize_context(&ctx); | 
|  | update_ifs_map(); | 
|  | if (!(flag & FLAG_PARSE_SEMICOLON) || (flag & FLAG_REPARSING)) mapset((uchar *)";$&|", 0); | 
|  | inp->promptmode=1; | 
|  | rcode = parse_stream(&temp, &ctx, inp, '\n'); | 
|  | #ifdef __U_BOOT__ | 
|  | if (rcode == 1) flag_repeat = 0; | 
|  | #endif | 
|  | if (rcode != 1 && ctx.old_flag != 0) { | 
|  | syntax(); | 
|  | #ifdef __U_BOOT__ | 
|  | flag_repeat = 0; | 
|  | #endif | 
|  | } | 
|  | if (rcode != 1 && ctx.old_flag == 0) { | 
|  | done_word(&temp, &ctx); | 
|  | done_pipe(&ctx,PIPE_SEQ); | 
|  | #ifndef __U_BOOT__ | 
|  | run_list(ctx.list_head); | 
|  | #else | 
|  | code = run_list(ctx.list_head); | 
|  | if (code == -2) {	/* exit */ | 
|  | b_free(&temp); | 
|  | code = 0; | 
|  | /* XXX hackish way to not allow exit from main loop */ | 
|  | if (inp->peek == file_peek) { | 
|  | printf("exit not allowed from main input shell.\n"); | 
|  | continue; | 
|  | } | 
|  | break; | 
|  | } | 
|  | if (code == -1) | 
|  | flag_repeat = 0; | 
|  | #endif | 
|  | } else { | 
|  | if (ctx.old_flag != 0) { | 
|  | free(ctx.stack); | 
|  | b_reset(&temp); | 
|  | } | 
|  | #ifdef __U_BOOT__ | 
|  | if (inp->__promptme == 0) printf("<INTERRUPT>\n"); | 
|  | inp->__promptme = 1; | 
|  | #endif | 
|  | temp.nonnull = 0; | 
|  | temp.quote = 0; | 
|  | inp->p = NULL; | 
|  | free_pipe_list(ctx.list_head,0); | 
|  | } | 
|  | b_free(&temp); | 
|  | } while (rcode != -1 && !(flag & FLAG_EXIT_FROM_LOOP));   /* loop on syntax errors, return on EOF */ | 
|  | #ifndef __U_BOOT__ | 
|  | return 0; | 
|  | #else | 
|  | return (code != 0) ? 1 : 0; | 
|  | #endif /* __U_BOOT__ */ | 
|  | } | 
|  |  | 
|  | #ifndef __U_BOOT__ | 
|  | static int parse_string_outer(const char *s, int flag) | 
|  | #else | 
|  | int parse_string_outer(char *s, int flag) | 
|  | #endif	/* __U_BOOT__ */ | 
|  | { | 
|  | struct in_str input; | 
|  | #ifdef __U_BOOT__ | 
|  | char *p = NULL; | 
|  | int rcode; | 
|  | if ( !s || !*s) | 
|  | return 1; | 
|  | if (!(p = strchr(s, '\n')) || *++p) { | 
|  | p = xmalloc(strlen(s) + 2); | 
|  | strcpy(p, s); | 
|  | strcat(p, "\n"); | 
|  | setup_string_in_str(&input, p); | 
|  | rcode = parse_stream_outer(&input, flag); | 
|  | free(p); | 
|  | return rcode; | 
|  | } else { | 
|  | #endif | 
|  | setup_string_in_str(&input, s); | 
|  | return parse_stream_outer(&input, flag); | 
|  | #ifdef __U_BOOT__ | 
|  | } | 
|  | #endif | 
|  | } | 
|  |  | 
|  | #ifndef __U_BOOT__ | 
|  | static int parse_file_outer(FILE *f) | 
|  | #else | 
|  | int parse_file_outer(void) | 
|  | #endif | 
|  | { | 
|  | int rcode; | 
|  | struct in_str input; | 
|  | #ifndef __U_BOOT__ | 
|  | setup_file_in_str(&input, f); | 
|  | #else | 
|  | setup_file_in_str(&input); | 
|  | #endif | 
|  | rcode = parse_stream_outer(&input, FLAG_PARSE_SEMICOLON); | 
|  | return rcode; | 
|  | } | 
|  |  | 
|  | #ifdef __U_BOOT__ | 
|  | #ifdef CONFIG_NEEDS_MANUAL_RELOC | 
|  | static void u_boot_hush_reloc(void) | 
|  | { | 
|  | unsigned long addr; | 
|  | struct reserved_combo *r; | 
|  |  | 
|  | for (r=reserved_list; r<reserved_list+NRES; r++) { | 
|  | addr = (ulong) (r->literal) + gd->reloc_off; | 
|  | r->literal = (char *)addr; | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | int u_boot_hush_start(void) | 
|  | { | 
|  | if (top_vars == NULL) { | 
|  | top_vars = malloc(sizeof(struct variables)); | 
|  | top_vars->name = "HUSH_VERSION"; | 
|  | top_vars->value = "0.01"; | 
|  | top_vars->next = 0; | 
|  | top_vars->flg_export = 0; | 
|  | top_vars->flg_read_only = 1; | 
|  | #ifdef CONFIG_NEEDS_MANUAL_RELOC | 
|  | u_boot_hush_reloc(); | 
|  | #endif | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void *xmalloc(size_t size) | 
|  | { | 
|  | void *p = NULL; | 
|  |  | 
|  | if (!(p = malloc(size))) { | 
|  | printf("ERROR : memory not allocated\n"); | 
|  | for(;;); | 
|  | } | 
|  | return p; | 
|  | } | 
|  |  | 
|  | static void *xrealloc(void *ptr, size_t size) | 
|  | { | 
|  | void *p = NULL; | 
|  |  | 
|  | if (!(p = realloc(ptr, size))) { | 
|  | printf("ERROR : memory not allocated\n"); | 
|  | for(;;); | 
|  | } | 
|  | return p; | 
|  | } | 
|  | #endif /* __U_BOOT__ */ | 
|  |  | 
|  | #ifndef __U_BOOT__ | 
|  | /* Make sure we have a controlling tty.  If we get started under a job | 
|  | * aware app (like bash for example), make sure we are now in charge so | 
|  | * we don't fight over who gets the foreground */ | 
|  | static void setup_job_control(void) | 
|  | { | 
|  | static pid_t shell_pgrp; | 
|  | /* Loop until we are in the foreground.  */ | 
|  | while (tcgetpgrp (shell_terminal) != (shell_pgrp = getpgrp ())) | 
|  | kill (- shell_pgrp, SIGTTIN); | 
|  |  | 
|  | /* Ignore interactive and job-control signals.  */ | 
|  | signal(SIGINT, SIG_IGN); | 
|  | signal(SIGQUIT, SIG_IGN); | 
|  | signal(SIGTERM, SIG_IGN); | 
|  | signal(SIGTSTP, SIG_IGN); | 
|  | signal(SIGTTIN, SIG_IGN); | 
|  | signal(SIGTTOU, SIG_IGN); | 
|  | signal(SIGCHLD, SIG_IGN); | 
|  |  | 
|  | /* Put ourselves in our own process group.  */ | 
|  | setsid(); | 
|  | shell_pgrp = getpid (); | 
|  | setpgid (shell_pgrp, shell_pgrp); | 
|  |  | 
|  | /* Grab control of the terminal.  */ | 
|  | tcsetpgrp(shell_terminal, shell_pgrp); | 
|  | } | 
|  |  | 
|  | int hush_main(int argc, char * const *argv) | 
|  | { | 
|  | int opt; | 
|  | FILE *input; | 
|  | char **e = environ; | 
|  |  | 
|  | /* XXX what should these be while sourcing /etc/profile? */ | 
|  | global_argc = argc; | 
|  | global_argv = argv; | 
|  |  | 
|  | /* (re?) initialize globals.  Sometimes hush_main() ends up calling | 
|  | * hush_main(), therefore we cannot rely on the BSS to zero out this | 
|  | * stuff.  Reset these to 0 every time. */ | 
|  | ifs = NULL; | 
|  | /* map[] is taken care of with call to update_ifs_map() */ | 
|  | fake_mode = 0; | 
|  | interactive = 0; | 
|  | close_me_head = NULL; | 
|  | last_bg_pid = 0; | 
|  | job_list = NULL; | 
|  | last_jobid = 0; | 
|  |  | 
|  | /* Initialize some more globals to non-zero values */ | 
|  | set_cwd(); | 
|  | #ifdef CONFIG_FEATURE_COMMAND_EDITING | 
|  | cmdedit_set_initial_prompt(); | 
|  | #else | 
|  | PS1 = NULL; | 
|  | #endif | 
|  | PS2 = "> "; | 
|  |  | 
|  | /* initialize our shell local variables with the values | 
|  | * currently living in the environment */ | 
|  | if (e) { | 
|  | for (; *e; e++) | 
|  | set_local_var(*e, 2);   /* without call putenv() */ | 
|  | } | 
|  |  | 
|  | last_return_code=EXIT_SUCCESS; | 
|  |  | 
|  |  | 
|  | if (argv[0] && argv[0][0] == '-') { | 
|  | debug_printf("\nsourcing /etc/profile\n"); | 
|  | if ((input = fopen("/etc/profile", "r")) != NULL) { | 
|  | mark_open(fileno(input)); | 
|  | parse_file_outer(input); | 
|  | mark_closed(fileno(input)); | 
|  | fclose(input); | 
|  | } | 
|  | } | 
|  | input=stdin; | 
|  |  | 
|  | while ((opt = getopt(argc, argv, "c:xif")) > 0) { | 
|  | switch (opt) { | 
|  | case 'c': | 
|  | { | 
|  | global_argv = argv+optind; | 
|  | global_argc = argc-optind; | 
|  | opt = parse_string_outer(optarg, FLAG_PARSE_SEMICOLON); | 
|  | goto final_return; | 
|  | } | 
|  | break; | 
|  | case 'i': | 
|  | interactive++; | 
|  | break; | 
|  | case 'f': | 
|  | fake_mode++; | 
|  | break; | 
|  | default: | 
|  | #ifndef BB_VER | 
|  | fprintf(stderr, "Usage: sh [FILE]...\n" | 
|  | "   or: sh -c command [args]...\n\n"); | 
|  | exit(EXIT_FAILURE); | 
|  | #else | 
|  | show_usage(); | 
|  | #endif | 
|  | } | 
|  | } | 
|  | /* A shell is interactive if the `-i' flag was given, or if all of | 
|  | * the following conditions are met: | 
|  | *	  no -c command | 
|  | *    no arguments remaining or the -s flag given | 
|  | *    standard input is a terminal | 
|  | *    standard output is a terminal | 
|  | *    Refer to Posix.2, the description of the `sh' utility. */ | 
|  | if (argv[optind]==NULL && input==stdin && | 
|  | isatty(fileno(stdin)) && isatty(fileno(stdout))) { | 
|  | interactive++; | 
|  | } | 
|  |  | 
|  | debug_printf("\ninteractive=%d\n", interactive); | 
|  | if (interactive) { | 
|  | /* Looks like they want an interactive shell */ | 
|  | #ifndef CONFIG_FEATURE_SH_EXTRA_QUIET | 
|  | printf( "\n\n" BB_BANNER " hush - the humble shell v0.01 (testing)\n"); | 
|  | printf( "Enter 'help' for a list of built-in commands.\n\n"); | 
|  | #endif | 
|  | setup_job_control(); | 
|  | } | 
|  |  | 
|  | if (argv[optind]==NULL) { | 
|  | opt=parse_file_outer(stdin); | 
|  | goto final_return; | 
|  | } | 
|  |  | 
|  | debug_printf("\nrunning script '%s'\n", argv[optind]); | 
|  | global_argv = argv+optind; | 
|  | global_argc = argc-optind; | 
|  | input = xfopen(argv[optind], "r"); | 
|  | opt = parse_file_outer(input); | 
|  |  | 
|  | #ifdef CONFIG_FEATURE_CLEAN_UP | 
|  | fclose(input); | 
|  | if (cwd && cwd != unknown) | 
|  | free((char*)cwd); | 
|  | { | 
|  | struct variables *cur, *tmp; | 
|  | for(cur = top_vars; cur; cur = tmp) { | 
|  | tmp = cur->next; | 
|  | if (!cur->flg_read_only) { | 
|  | free(cur->name); | 
|  | free(cur->value); | 
|  | free(cur); | 
|  | } | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | final_return: | 
|  | return(opt?opt:last_return_code); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static char *insert_var_value(char *inp) | 
|  | { | 
|  | int res_str_len = 0; | 
|  | int len; | 
|  | int done = 0; | 
|  | char *p, *p1, *res_str = NULL; | 
|  |  | 
|  | while ((p = strchr(inp, SPECIAL_VAR_SYMBOL))) { | 
|  | if (p != inp) { | 
|  | len = p - inp; | 
|  | res_str = xrealloc(res_str, (res_str_len + len)); | 
|  | strncpy((res_str + res_str_len), inp, len); | 
|  | res_str_len += len; | 
|  | } | 
|  | inp = ++p; | 
|  | p = strchr(inp, SPECIAL_VAR_SYMBOL); | 
|  | *p = '\0'; | 
|  | if ((p1 = lookup_param(inp))) { | 
|  | len = res_str_len + strlen(p1); | 
|  | res_str = xrealloc(res_str, (1 + len)); | 
|  | strcpy((res_str + res_str_len), p1); | 
|  | res_str_len = len; | 
|  | } | 
|  | *p = SPECIAL_VAR_SYMBOL; | 
|  | inp = ++p; | 
|  | done = 1; | 
|  | } | 
|  | if (done) { | 
|  | res_str = xrealloc(res_str, (1 + res_str_len + strlen(inp))); | 
|  | strcpy((res_str + res_str_len), inp); | 
|  | while ((p = strchr(res_str, '\n'))) { | 
|  | *p = ' '; | 
|  | } | 
|  | } | 
|  | return (res_str == NULL) ? inp : res_str; | 
|  | } | 
|  |  | 
|  | static char **make_list_in(char **inp, char *name) | 
|  | { | 
|  | int len, i; | 
|  | int name_len = strlen(name); | 
|  | int n = 0; | 
|  | char **list; | 
|  | char *p1, *p2, *p3; | 
|  |  | 
|  | /* create list of variable values */ | 
|  | list = xmalloc(sizeof(*list)); | 
|  | for (i = 0; inp[i]; i++) { | 
|  | p3 = insert_var_value(inp[i]); | 
|  | p1 = p3; | 
|  | while (*p1) { | 
|  | if ((*p1 == ' ')) { | 
|  | p1++; | 
|  | continue; | 
|  | } | 
|  | if ((p2 = strchr(p1, ' '))) { | 
|  | len = p2 - p1; | 
|  | } else { | 
|  | len = strlen(p1); | 
|  | p2 = p1 + len; | 
|  | } | 
|  | /* we use n + 2 in realloc for list,because we add | 
|  | * new element and then we will add NULL element */ | 
|  | list = xrealloc(list, sizeof(*list) * (n + 2)); | 
|  | list[n] = xmalloc(2 + name_len + len); | 
|  | strcpy(list[n], name); | 
|  | strcat(list[n], "="); | 
|  | strncat(list[n], p1, len); | 
|  | list[n++][name_len + len + 1] = '\0'; | 
|  | p1 = p2; | 
|  | } | 
|  | if (p3 != inp[i]) free(p3); | 
|  | } | 
|  | list[n] = NULL; | 
|  | return list; | 
|  | } | 
|  |  | 
|  | /* Make new string for parser */ | 
|  | static char * make_string(char ** inp) | 
|  | { | 
|  | char *p; | 
|  | char *str = NULL; | 
|  | int n; | 
|  | int len = 2; | 
|  |  | 
|  | for (n = 0; inp[n]; n++) { | 
|  | p = insert_var_value(inp[n]); | 
|  | str = xrealloc(str, (len + strlen(p))); | 
|  | if (n) { | 
|  | strcat(str, " "); | 
|  | } else { | 
|  | *str = '\0'; | 
|  | } | 
|  | strcat(str, p); | 
|  | len = strlen(str) + 3; | 
|  | if (p != inp[n]) free(p); | 
|  | } | 
|  | len = strlen(str); | 
|  | *(str + len) = '\n'; | 
|  | *(str + len + 1) = '\0'; | 
|  | return str; | 
|  | } | 
|  |  | 
|  | #ifdef __U_BOOT__ | 
|  | int do_showvar (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | 
|  | { | 
|  | int i, k; | 
|  | int rcode = 0; | 
|  | struct variables *cur; | 
|  |  | 
|  | if (argc == 1) {		/* Print all env variables	*/ | 
|  | for (cur = top_vars; cur; cur = cur->next) { | 
|  | printf ("%s=%s\n", cur->name, cur->value); | 
|  | if (ctrlc ()) { | 
|  | puts ("\n ** Abort\n"); | 
|  | return 1; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | for (i = 1; i < argc; ++i) {	/* print single env variables	*/ | 
|  | char *name = argv[i]; | 
|  |  | 
|  | k = -1; | 
|  | for (cur = top_vars; cur; cur = cur->next) { | 
|  | if(strcmp (cur->name, name) == 0) { | 
|  | k = 0; | 
|  | printf ("%s=%s\n", cur->name, cur->value); | 
|  | } | 
|  | if (ctrlc ()) { | 
|  | puts ("\n ** Abort\n"); | 
|  | return 1; | 
|  | } | 
|  | } | 
|  | if (k < 0) { | 
|  | printf ("## Error: \"%s\" not defined\n", name); | 
|  | rcode ++; | 
|  | } | 
|  | } | 
|  | return rcode; | 
|  | } | 
|  |  | 
|  | U_BOOT_CMD( | 
|  | showvar, CONFIG_SYS_MAXARGS, 1,	do_showvar, | 
|  | "print local hushshell variables", | 
|  | "\n    - print values of all hushshell variables\n" | 
|  | "showvar name ...\n" | 
|  | "    - print value of hushshell variable 'name'" | 
|  | ); | 
|  |  | 
|  | #endif | 
|  | /****************************************************************************/ |