| /* | 
 |  * Watchdog driver for the FTWDT010 Watch Dog Driver | 
 |  * | 
 |  * (c) Copyright 2004 Faraday Technology Corp. (www.faraday-tech.com) | 
 |  * Based on sa1100_wdt.c by Oleg Drokin <green@crimea.edu> | 
 |  * Based on SoftDog driver by Alan Cox <alan@redhat.com> | 
 |  * | 
 |  * Copyright (C) 2011 Andes Technology Corporation | 
 |  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 |  * | 
 |  * 27/11/2004 Initial release, Faraday. | 
 |  * 12/01/2011 Port to u-boot, Macpaul Lin. | 
 |  */ | 
 |  | 
 | #include <common.h> | 
 | #include <watchdog.h> | 
 | #include <asm/io.h> | 
 | #include <faraday/ftwdt010_wdt.h> | 
 |  | 
 | /* | 
 |  * Set the watchdog time interval. | 
 |  * Counter is 32 bit. | 
 |  */ | 
 | int ftwdt010_wdt_settimeout(unsigned int timeout) | 
 | { | 
 | 	unsigned int reg; | 
 |  | 
 | 	struct ftwdt010_wdt *wd = (struct ftwdt010_wdt *)CONFIG_FTWDT010_BASE; | 
 |  | 
 | 	debug("Activating WDT..\n"); | 
 |  | 
 | 	/* Check if disabled */ | 
 | 	if (readl(&wd->wdcr) & ~FTWDT010_WDCR_ENABLE) { | 
 | 		printf("sorry, watchdog is disabled\n"); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * In a 66MHz system, | 
 | 	 * if you set WDLOAD as 0x03EF1480 (66000000) | 
 | 	 * the reset timer is 1 second. | 
 | 	 */ | 
 | 	reg = FTWDT010_WDLOAD(timeout * FTWDT010_TIMEOUT_FACTOR); | 
 |  | 
 | 	writel(reg, &wd->wdload); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | void ftwdt010_wdt_reset(void) | 
 | { | 
 | 	struct ftwdt010_wdt *wd = (struct ftwdt010_wdt *)CONFIG_FTWDT010_BASE; | 
 |  | 
 | 	/* clear control register */ | 
 | 	writel(0, &wd->wdcr); | 
 |  | 
 | 	/* Write Magic number */ | 
 | 	writel(FTWDT010_WDRESTART_MAGIC, &wd->wdrestart); | 
 |  | 
 | 	/* Enable WDT */ | 
 | 	writel((FTWDT010_WDCR_RST | FTWDT010_WDCR_ENABLE), &wd->wdcr); | 
 | } | 
 |  | 
 | void ftwdt010_wdt_disable(void) | 
 | { | 
 | 	struct ftwdt010_wdt *wd = (struct ftwdt010_wdt *)CONFIG_FTWDT010_BASE; | 
 |  | 
 | 	debug("Deactivating WDT..\n"); | 
 |  | 
 | 	/* | 
 | 	 * It was defined with CONFIG_WATCHDOG_NOWAYOUT in Linux | 
 | 	 * | 
 | 	 * Shut off the timer. | 
 | 	 * Lock it in if it's a module and we defined ...NOWAYOUT | 
 | 	 */ | 
 | 	writel(0, &wd->wdcr); | 
 | } | 
 |  | 
 | #if defined(CONFIG_HW_WATCHDOG) | 
 | void hw_watchdog_reset(void) | 
 | { | 
 | 	ftwdt010_wdt_reset(); | 
 | } | 
 |  | 
 | void hw_watchdog_init(void) | 
 | { | 
 | 	/* set timer in ms */ | 
 | 	ftwdt010_wdt_settimeout(CONFIG_FTWDT010_HW_TIMEOUT * 1000); | 
 | } | 
 | #endif |