|  | /* | 
|  | * (C) Copyright 2000-2003 | 
|  | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | 
|  | * | 
|  | * See file CREDITS for list of people who contributed to this | 
|  | * project. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation; either version 2 of | 
|  | * the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
|  | * MA 02111-1307 USA | 
|  | */ | 
|  |  | 
|  | #include <common.h> | 
|  | #include <status_led.h> | 
|  |  | 
|  | /* | 
|  | * The purpose of this code is to signal the operational status of a | 
|  | * target which usually boots over the network; while running in | 
|  | * U-Boot, a status LED is blinking. As soon as a valid BOOTP reply | 
|  | * message has been received, the LED is turned off. The Linux | 
|  | * kernel, once it is running, will start blinking the LED again, | 
|  | * with another frequency. | 
|  | */ | 
|  |  | 
|  | /* ------------------------------------------------------------------------- */ | 
|  |  | 
|  | typedef struct { | 
|  | led_id_t mask; | 
|  | int state; | 
|  | int period; | 
|  | int cnt; | 
|  | } led_dev_t; | 
|  |  | 
|  | led_dev_t led_dev[] = { | 
|  | {	STATUS_LED_BIT, | 
|  | STATUS_LED_STATE, | 
|  | STATUS_LED_PERIOD, | 
|  | 0, | 
|  | }, | 
|  | #if defined(STATUS_LED_BIT1) | 
|  | {	STATUS_LED_BIT1, | 
|  | STATUS_LED_STATE1, | 
|  | STATUS_LED_PERIOD1, | 
|  | 0, | 
|  | }, | 
|  | #endif | 
|  | #if defined(STATUS_LED_BIT2) | 
|  | {	STATUS_LED_BIT2, | 
|  | STATUS_LED_STATE2, | 
|  | STATUS_LED_PERIOD2, | 
|  | 0, | 
|  | }, | 
|  | #endif | 
|  | #if defined(STATUS_LED_BIT3) | 
|  | {	STATUS_LED_BIT3, | 
|  | STATUS_LED_STATE3, | 
|  | STATUS_LED_PERIOD3, | 
|  | 0, | 
|  | }, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | #define MAX_LED_DEV	(sizeof(led_dev)/sizeof(led_dev_t)) | 
|  |  | 
|  | static int status_led_init_done = 0; | 
|  |  | 
|  | static void status_led_init (void) | 
|  | { | 
|  | led_dev_t *ld; | 
|  | int i; | 
|  |  | 
|  | for (i = 0, ld = led_dev; i < MAX_LED_DEV; i++, ld++) | 
|  | __led_init (ld->mask, ld->state); | 
|  | status_led_init_done = 1; | 
|  | } | 
|  |  | 
|  | void status_led_tick (ulong timestamp) | 
|  | { | 
|  | led_dev_t *ld; | 
|  | int i; | 
|  |  | 
|  | if (!status_led_init_done) | 
|  | status_led_init (); | 
|  |  | 
|  | for (i = 0, ld = led_dev; i < MAX_LED_DEV; i++, ld++) { | 
|  |  | 
|  | if (ld->state != STATUS_LED_BLINKING) | 
|  | continue; | 
|  |  | 
|  | if (++ld->cnt >= ld->period) { | 
|  | __led_toggle (ld->mask); | 
|  | ld->cnt -= ld->period; | 
|  | } | 
|  |  | 
|  | } | 
|  | } | 
|  |  | 
|  | void status_led_set (int led, int state) | 
|  | { | 
|  | led_dev_t *ld; | 
|  |  | 
|  | if (led < 0 || led >= MAX_LED_DEV) | 
|  | return; | 
|  |  | 
|  | if (!status_led_init_done) | 
|  | status_led_init (); | 
|  |  | 
|  | ld = &led_dev[led]; | 
|  |  | 
|  | ld->state = state; | 
|  | if (state == STATUS_LED_BLINKING) { | 
|  | ld->cnt = 0;		/* always start with full period    */ | 
|  | state = STATUS_LED_ON;	/* always start with LED _ON_       */ | 
|  | } | 
|  | __led_set (ld->mask, state); | 
|  | } |