| /* | 
 |  * (C) Copyright 2003, Psyent Corporation <www.psyent.com> | 
 |  * Scott McNutt <smcnutt@psyent.com> | 
 |  * | 
 |  * CompactFlash/IDE: | 
 |  * (C) Copyright 2004, Shlomo Kut <skut@vyyo.com> | 
 |  * | 
 |  * See file CREDITS for list of people who contributed to this | 
 |  * project. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation; either version 2 of | 
 |  * the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
 |  * MA 02111-1307 USA | 
 |  */ | 
 |  | 
 | #include <common.h> | 
 | #include <nios-io.h> | 
 | #if	defined(CONFIG_SEVENSEG) | 
 | #include "../common/sevenseg.h" | 
 | #endif | 
 |  | 
 | void _default_hdlr (void) | 
 | { | 
 | 	printf ("default_hdlr\n"); | 
 | } | 
 |  | 
 | int board_early_init_f (void) | 
 | { | 
 | #if	defined(CONFIG_SEVENSEG) | 
 | 	/* init seven segment led display and switch off */ | 
 | 	sevenseg_set(SEVENSEG_OFF); | 
 | #endif | 
 | 	return 0; | 
 | } | 
 |  | 
 | int checkboard (void) | 
 | { | 
 | 	puts ("Board: Altera Nios 1C20 Development Kit\n"); | 
 | 	return 0; | 
 | } | 
 |  | 
 | long int initdram (int board_type) | 
 | { | 
 | 	return (0); | 
 | } | 
 |  | 
 | #if (CONFIG_COMMANDS & CFG_CMD_IDE) | 
 | int ide_preinit (void) | 
 | { | 
 | 	nios_pio_t *present = (nios_pio_t *) CFG_CF_PRESENT; | 
 | 	nios_pio_t *power = (nios_pio_t *) CFG_CF_POWER; | 
 | 	nios_pio_t *atasel = (nios_pio_t *) CFG_CF_ATASEL; | 
 |  | 
 | 	/* setup data direction registers */ | 
 | 	present->direction = NIOS_PIO_IN; | 
 | 	power->direction = NIOS_PIO_OUT; | 
 | 	atasel->direction = NIOS_PIO_OUT; | 
 |  | 
 | 	/* Check for presence of card */ | 
 | 	if (present->data) | 
 | 		return 1; | 
 | 	printf ("Ok\n"); | 
 |  | 
 | 	/* Finish setup */ | 
 | 	power->data = 1;	/* Turn on power FET */ | 
 | 	atasel->data = 0;	/* Put in ATA mode */ | 
 |  | 
 | 	return 0; | 
 | } | 
 | #endif /* CONFIG_COMMANDS & CFG_CMD_IDE */ |