| /* | 
 |  * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> | 
 |  * Andreas Heppel <aheppel@sysgo.de> | 
 |  * | 
 |  * (C) Copyright 2002, 2003 | 
 |  * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | 
 |  * | 
 |  * See file CREDITS for list of people who contributed to this | 
 |  * project. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation; either version 2 of | 
 |  * the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
 |  * MA 02111-1307 USA | 
 |  */ | 
 |  | 
 | /* | 
 |  * PCI routines | 
 |  */ | 
 |  | 
 | #include <common.h> | 
 |  | 
 | #include <command.h> | 
 | #include <asm/processor.h> | 
 | #include <asm/io.h> | 
 | #include <pci.h> | 
 |  | 
 | #define PCI_HOSE_OP(rw, size, type)					\ | 
 | int pci_hose_##rw##_config_##size(struct pci_controller *hose,		\ | 
 | 				  pci_dev_t dev,			\ | 
 | 				  int offset, type value)		\ | 
 | {									\ | 
 | 	return hose->rw##_##size(hose, dev, offset, value);		\ | 
 | } | 
 |  | 
 | PCI_HOSE_OP(read, byte, u8 *) | 
 | PCI_HOSE_OP(read, word, u16 *) | 
 | PCI_HOSE_OP(read, dword, u32 *) | 
 | PCI_HOSE_OP(write, byte, u8) | 
 | PCI_HOSE_OP(write, word, u16) | 
 | PCI_HOSE_OP(write, dword, u32) | 
 |  | 
 | #ifndef CONFIG_IXP425 | 
 | #define PCI_OP(rw, size, type, error_code)				\ | 
 | int pci_##rw##_config_##size(pci_dev_t dev, int offset, type value)	\ | 
 | {									\ | 
 | 	struct pci_controller *hose = pci_bus_to_hose(PCI_BUS(dev));	\ | 
 | 									\ | 
 | 	if (!hose)							\ | 
 | 	{								\ | 
 | 		error_code;						\ | 
 | 		return -1;						\ | 
 | 	}								\ | 
 | 									\ | 
 | 	return pci_hose_##rw##_config_##size(hose, dev, offset, value);	\ | 
 | } | 
 |  | 
 | PCI_OP(read, byte, u8 *, *value = 0xff) | 
 | PCI_OP(read, word, u16 *, *value = 0xffff) | 
 | PCI_OP(read, dword, u32 *, *value = 0xffffffff) | 
 | PCI_OP(write, byte, u8, ) | 
 | PCI_OP(write, word, u16, ) | 
 | PCI_OP(write, dword, u32, ) | 
 | #endif	/* CONFIG_IXP425 */ | 
 |  | 
 | #define PCI_READ_VIA_DWORD_OP(size, type, off_mask)			\ | 
 | int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\ | 
 | 					pci_dev_t dev,			\ | 
 | 					int offset, type val)		\ | 
 | {									\ | 
 | 	u32 val32;							\ | 
 | 									\ | 
 | 	if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) {	\ | 
 | 		*val = -1;						\ | 
 | 		return -1;						\ | 
 | 	}								\ | 
 | 									\ | 
 | 	*val = (val32 >> ((offset & (int)off_mask) * 8));		\ | 
 | 									\ | 
 | 	return 0;							\ | 
 | } | 
 |  | 
 | #define PCI_WRITE_VIA_DWORD_OP(size, type, off_mask, val_mask)		\ | 
 | int pci_hose_write_config_##size##_via_dword(struct pci_controller *hose,\ | 
 | 					     pci_dev_t dev,		\ | 
 | 					     int offset, type val)	\ | 
 | {									\ | 
 | 	u32 val32, mask, ldata, shift;					\ | 
 | 									\ | 
 | 	if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\ | 
 | 		return -1;						\ | 
 | 									\ | 
 | 	shift = ((offset & (int)off_mask) * 8);				\ | 
 | 	ldata = (((unsigned long)val) & val_mask) << shift;		\ | 
 | 	mask = val_mask << shift;					\ | 
 | 	val32 = (val32 & ~mask) | ldata;				\ | 
 | 									\ | 
 | 	if (pci_hose_write_config_dword(hose, dev, offset & 0xfc, val32) < 0)\ | 
 | 		return -1;						\ | 
 | 									\ | 
 | 	return 0;							\ | 
 | } | 
 |  | 
 | PCI_READ_VIA_DWORD_OP(byte, u8 *, 0x03) | 
 | PCI_READ_VIA_DWORD_OP(word, u16 *, 0x02) | 
 | PCI_WRITE_VIA_DWORD_OP(byte, u8, 0x03, 0x000000ff) | 
 | PCI_WRITE_VIA_DWORD_OP(word, u16, 0x02, 0x0000ffff) | 
 |  | 
 | /* | 
 |  * | 
 |  */ | 
 |  | 
 | static struct pci_controller* hose_head = NULL; | 
 |  | 
 | void pci_register_hose(struct pci_controller* hose) | 
 | { | 
 | 	struct pci_controller **phose = &hose_head; | 
 |  | 
 | 	while(*phose) | 
 | 		phose = &(*phose)->next; | 
 |  | 
 | 	hose->next = NULL; | 
 |  | 
 | 	*phose = hose; | 
 | } | 
 |  | 
 | struct pci_controller *pci_bus_to_hose (int bus) | 
 | { | 
 | 	struct pci_controller *hose; | 
 |  | 
 | 	for (hose = hose_head; hose; hose = hose->next) | 
 | 		if (bus >= hose->first_busno && bus <= hose->last_busno) | 
 | 			return hose; | 
 |  | 
 | 	printf("pci_bus_to_hose() failed\n"); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | #ifndef CONFIG_IXP425 | 
 | pci_dev_t pci_find_devices(struct pci_device_id *ids, int index) | 
 | { | 
 | 	struct pci_controller * hose; | 
 | 	u16 vendor, device; | 
 | 	u8 header_type; | 
 | 	pci_dev_t bdf; | 
 | 	int i, bus, found_multi = 0; | 
 |  | 
 | 	for (hose = hose_head; hose; hose = hose->next) | 
 | 	{ | 
 | #ifdef CFG_SCSI_SCAN_BUS_REVERSE | 
 | 		for (bus = hose->last_busno; bus >= hose->first_busno; bus--) | 
 | #else | 
 | 		for (bus = hose->first_busno; bus <= hose->last_busno; bus++) | 
 | #endif | 
 | 			for (bdf = PCI_BDF(bus,0,0); | 
 | #if defined(CONFIG_ELPPC) || defined(CONFIG_PPMC7XX) | 
 | 			     bdf < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); | 
 | #else | 
 | 			     bdf < PCI_BDF(bus+1,0,0); | 
 | #endif | 
 | 			     bdf += PCI_BDF(0,0,1)) | 
 | 			{ | 
 | 				if (!PCI_FUNC(bdf)) { | 
 | 					pci_read_config_byte(bdf, | 
 | 							     PCI_HEADER_TYPE, | 
 | 							     &header_type); | 
 |  | 
 | 					found_multi = header_type & 0x80; | 
 | 				} else { | 
 | 					if (!found_multi) | 
 | 						continue; | 
 | 				} | 
 |  | 
 | 				pci_read_config_word(bdf, | 
 | 						     PCI_VENDOR_ID, | 
 | 						     &vendor); | 
 | 				pci_read_config_word(bdf, | 
 | 						     PCI_DEVICE_ID, | 
 | 						     &device); | 
 |  | 
 | 				for (i=0; ids[i].vendor != 0; i++) | 
 | 					if (vendor == ids[i].vendor && | 
 | 					    device == ids[i].device) | 
 | 					{ | 
 | 						if (index <= 0) | 
 | 							return bdf; | 
 |  | 
 | 						index--; | 
 | 					} | 
 | 			} | 
 | 	} | 
 |  | 
 | 	return (-1); | 
 | } | 
 | #endif	/* CONFIG_IXP425 */ | 
 |  | 
 | pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index) | 
 | { | 
 | 	static struct pci_device_id ids[2] = {{}, {0, 0}}; | 
 |  | 
 | 	ids[0].vendor = vendor; | 
 | 	ids[0].device = device; | 
 |  | 
 | 	return pci_find_devices(ids, index); | 
 | } | 
 |  | 
 | /* | 
 |  * | 
 |  */ | 
 |  | 
 | unsigned long pci_hose_phys_to_bus (struct pci_controller *hose, | 
 | 				    phys_addr_t phys_addr, | 
 | 				    unsigned long flags) | 
 | { | 
 | 	struct pci_region *res; | 
 | 	unsigned long bus_addr; | 
 | 	int i; | 
 |  | 
 | 	if (!hose) { | 
 | 		printf ("pci_hose_phys_to_bus: %s\n", "invalid hose"); | 
 | 		goto Done; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < hose->region_count; i++) { | 
 | 		res = &hose->regions[i]; | 
 |  | 
 | 		if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0) | 
 | 			continue; | 
 |  | 
 | 		bus_addr = phys_addr - res->phys_start + res->bus_start; | 
 |  | 
 | 		if (bus_addr >= res->bus_start && | 
 | 			bus_addr < res->bus_start + res->size) { | 
 | 			return bus_addr; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	printf ("pci_hose_phys_to_bus: %s\n", "invalid physical address"); | 
 |  | 
 | Done: | 
 | 	return 0; | 
 | } | 
 |  | 
 | phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose, | 
 | 				 unsigned long bus_addr, | 
 | 				 unsigned long flags) | 
 | { | 
 | 	struct pci_region *res; | 
 | 	int i; | 
 |  | 
 | 	if (!hose) { | 
 | 		printf ("pci_hose_bus_to_phys: %s\n", "invalid hose"); | 
 | 		goto Done; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < hose->region_count; i++) { | 
 | 		res = &hose->regions[i]; | 
 |  | 
 | 		if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0) | 
 | 			continue; | 
 |  | 
 | 		if (bus_addr >= res->bus_start && | 
 | 			bus_addr < res->bus_start + res->size) { | 
 | 			return bus_addr - res->bus_start + res->phys_start; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	printf ("pci_hose_bus_to_phys: %s\n", "invalid physical address"); | 
 |  | 
 | Done: | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * | 
 |  */ | 
 |  | 
 | int pci_hose_config_device(struct pci_controller *hose, | 
 | 			   pci_dev_t dev, | 
 | 			   unsigned long io, | 
 | 			   unsigned long mem, | 
 | 			   unsigned long command) | 
 | { | 
 | 	unsigned int bar_response, bar_size, bar_value, old_command; | 
 | 	unsigned char pin; | 
 | 	int bar, found_mem64; | 
 |  | 
 | 	debug ("PCI Config: I/O=0x%lx, Memory=0x%lx, Command=0x%lx\n", | 
 | 		io, mem, command); | 
 |  | 
 | 	pci_hose_write_config_dword (hose, dev, PCI_COMMAND, 0); | 
 |  | 
 | 	for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_5; bar += 4) { | 
 | 		pci_hose_write_config_dword (hose, dev, bar, 0xffffffff); | 
 | 		pci_hose_read_config_dword (hose, dev, bar, &bar_response); | 
 |  | 
 | 		if (!bar_response) | 
 | 			continue; | 
 |  | 
 | 		found_mem64 = 0; | 
 |  | 
 | 		/* Check the BAR type and set our address mask */ | 
 | 		if (bar_response & PCI_BASE_ADDRESS_SPACE) { | 
 | 			bar_size = ~(bar_response & PCI_BASE_ADDRESS_IO_MASK) + 1; | 
 | 			/* round up region base address to a multiple of size */ | 
 | 			io = ((io - 1) | (bar_size - 1)) + 1; | 
 | 			bar_value = io; | 
 | 			/* compute new region base address */ | 
 | 			io = io + bar_size; | 
 | 		} else { | 
 | 			if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == | 
 | 				PCI_BASE_ADDRESS_MEM_TYPE_64) | 
 | 				found_mem64 = 1; | 
 |  | 
 | 			bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1; | 
 |  | 
 | 			/* round up region base address to multiple of size */ | 
 | 			mem = ((mem - 1) | (bar_size - 1)) + 1; | 
 | 			bar_value = mem; | 
 | 			/* compute new region base address */ | 
 | 			mem = mem + bar_size; | 
 | 		} | 
 |  | 
 | 		/* Write it out and update our limit */ | 
 | 		pci_hose_write_config_dword (hose, dev, bar, bar_value); | 
 |  | 
 | 		if (found_mem64) { | 
 | 			bar += 4; | 
 | 			pci_hose_write_config_dword (hose, dev, bar, 0x00000000); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Configure Cache Line Size Register */ | 
 | 	pci_hose_write_config_byte (hose, dev, PCI_CACHE_LINE_SIZE, 0x08); | 
 |  | 
 | 	/* Configure Latency Timer */ | 
 | 	pci_hose_write_config_byte (hose, dev, PCI_LATENCY_TIMER, 0x80); | 
 |  | 
 | 	/* Disable interrupt line, if device says it wants to use interrupts */ | 
 | 	pci_hose_read_config_byte (hose, dev, PCI_INTERRUPT_PIN, &pin); | 
 | 	if (pin != 0) { | 
 | 		pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, 0xff); | 
 | 	} | 
 |  | 
 | 	pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &old_command); | 
 | 	pci_hose_write_config_dword (hose, dev, PCI_COMMAND, | 
 | 				     (old_command & 0xffff0000) | command); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * | 
 |  */ | 
 |  | 
 | struct pci_config_table *pci_find_config(struct pci_controller *hose, | 
 | 					 unsigned short class, | 
 | 					 unsigned int vendor, | 
 | 					 unsigned int device, | 
 | 					 unsigned int bus, | 
 | 					 unsigned int dev, | 
 | 					 unsigned int func) | 
 | { | 
 | 	struct pci_config_table *table; | 
 |  | 
 | 	for (table = hose->config_table; table && table->vendor; table++) { | 
 | 		if ((table->vendor == PCI_ANY_ID || table->vendor == vendor) && | 
 | 		    (table->device == PCI_ANY_ID || table->device == device) && | 
 | 		    (table->class  == PCI_ANY_ID || table->class  == class)  && | 
 | 		    (table->bus    == PCI_ANY_ID || table->bus    == bus)    && | 
 | 		    (table->dev    == PCI_ANY_ID || table->dev    == dev)    && | 
 | 		    (table->func   == PCI_ANY_ID || table->func   == func)) { | 
 | 			return table; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | void pci_cfgfunc_config_device(struct pci_controller *hose, | 
 | 			       pci_dev_t dev, | 
 | 			       struct pci_config_table *entry) | 
 | { | 
 | 	pci_hose_config_device(hose, dev, entry->priv[0], entry->priv[1], entry->priv[2]); | 
 | } | 
 |  | 
 | void pci_cfgfunc_do_nothing(struct pci_controller *hose, | 
 | 			    pci_dev_t dev, struct pci_config_table *entry) | 
 | { | 
 | } | 
 |  | 
 | /* | 
 |  * | 
 |  */ | 
 |  | 
 | /* HJF: Changed this to return int. I think this is required | 
 |  * to get the correct result when scanning bridges | 
 |  */ | 
 | extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev); | 
 | extern void pciauto_config_init(struct pci_controller *hose); | 
 |  | 
 | int __pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) | 
 | { | 
 | 	/* | 
 | 	 * Check if pci device should be skipped in configuration | 
 | 	 */ | 
 | 	if (dev == PCI_BDF(hose->first_busno, 0, 0)) { | 
 | #if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE) /* don't skip host bridge */ | 
 | 		/* | 
 | 		 * Only skip configuration if "pciconfighost" is not set | 
 | 		 */ | 
 | 		if (getenv("pciconfighost") == NULL) | 
 | 			return 1; | 
 | #else | 
 | 		return 1; | 
 | #endif | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 | int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) | 
 | 	__attribute__((weak, alias("__pci_skip_dev"))); | 
 |  | 
 | #ifdef CONFIG_PCI_SCAN_SHOW | 
 | int __pci_print_dev(struct pci_controller *hose, pci_dev_t dev) | 
 | { | 
 | 	if (dev == PCI_BDF(hose->first_busno, 0, 0)) | 
 | 		return 0; | 
 |  | 
 | 	return 1; | 
 | } | 
 | int pci_print_dev(struct pci_controller *hose, pci_dev_t dev) | 
 | 	__attribute__((weak, alias("__pci_print_dev"))); | 
 | #endif /* CONFIG_PCI_SCAN_SHOW */ | 
 |  | 
 | int pci_hose_scan_bus(struct pci_controller *hose, int bus) | 
 | { | 
 | 	unsigned int sub_bus, found_multi=0; | 
 | 	unsigned short vendor, device, class; | 
 | 	unsigned char header_type; | 
 | 	struct pci_config_table *cfg; | 
 | 	pci_dev_t dev; | 
 |  | 
 | 	sub_bus = bus; | 
 |  | 
 | 	for (dev =  PCI_BDF(bus,0,0); | 
 | 	     dev <  PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); | 
 | 	     dev += PCI_BDF(0,0,1)) { | 
 |  | 
 | 		if (pci_skip_dev(hose, dev)) | 
 | 			continue; | 
 |  | 
 | 		if (PCI_FUNC(dev) && !found_multi) | 
 | 			continue; | 
 |  | 
 | 		pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type); | 
 |  | 
 | 		pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor); | 
 |  | 
 | 		if (vendor != 0xffff && vendor != 0x0000) { | 
 |  | 
 | 			if (!PCI_FUNC(dev)) | 
 | 				found_multi = header_type & 0x80; | 
 |  | 
 | 			debug ("PCI Scan: Found Bus %d, Device %d, Function %d\n", | 
 | 				PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev) ); | 
 |  | 
 | 			pci_hose_read_config_word(hose, dev, PCI_DEVICE_ID, &device); | 
 | 			pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class); | 
 |  | 
 | 			cfg = pci_find_config(hose, class, vendor, device, | 
 | 					      PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev)); | 
 | 			if (cfg) { | 
 | 				cfg->config_device(hose, dev, cfg); | 
 | 				sub_bus = max(sub_bus, hose->current_busno); | 
 | #ifdef CONFIG_PCI_PNP | 
 | 			} else { | 
 | 				int n = pciauto_config_device(hose, dev); | 
 |  | 
 | 				sub_bus = max(sub_bus, n); | 
 | #endif | 
 | 			} | 
 | 			if (hose->fixup_irq) | 
 | 				hose->fixup_irq(hose, dev); | 
 |  | 
 | #ifdef CONFIG_PCI_SCAN_SHOW | 
 | 			if (pci_print_dev(hose, dev)) { | 
 | 				unsigned char int_line; | 
 |  | 
 | 				pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_LINE, | 
 | 							  &int_line); | 
 | 				printf("        %02x  %02x  %04x  %04x  %04x  %02x\n", | 
 | 				       PCI_BUS(dev), PCI_DEV(dev), vendor, device, class, | 
 | 				       int_line); | 
 | 			} | 
 | #endif | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return sub_bus; | 
 | } | 
 |  | 
 | int pci_hose_scan(struct pci_controller *hose) | 
 | { | 
 | 	/* Start scan at current_busno. | 
 | 	 * PCIe will start scan at first_busno+1. | 
 | 	 */ | 
 | 	/* For legacy support, ensure current>=first */ | 
 | 	if (hose->first_busno > hose->current_busno) | 
 | 		hose->current_busno = hose->first_busno; | 
 | #ifdef CONFIG_PCI_PNP | 
 | 	pciauto_config_init(hose); | 
 | #endif | 
 | 	return pci_hose_scan_bus(hose, hose->current_busno); | 
 | } | 
 |  | 
 | void pci_init(void) | 
 | { | 
 | #if defined(CONFIG_PCI_BOOTDELAY) | 
 | 	char *s; | 
 | 	int i; | 
 |  | 
 | 	/* wait "pcidelay" ms (if defined)... */ | 
 | 	s = getenv ("pcidelay"); | 
 | 	if (s) { | 
 | 		int val = simple_strtoul (s, NULL, 10); | 
 | 		for (i=0; i<val; i++) | 
 | 			udelay (1000); | 
 | 	} | 
 | #endif /* CONFIG_PCI_BOOTDELAY */ | 
 |  | 
 | 	/* now call board specific pci_init()... */ | 
 | 	pci_init_board(); | 
 | } |