| /* | 
 |  * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> | 
 |  * Andreas Heppel <aheppel@sysgo.de> | 
 |  * | 
 |  * See file CREDITS for list of people who contributed to this | 
 |  * project. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation; either version 2 of | 
 |  * the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
 |  * MA 02111-1307 USA | 
 |  */ | 
 |  | 
 | /* | 
 |  * Initialisation of the PCI-to-ISA bridge and disabling the BIOS | 
 |  * write protection (for flash) in function 0 of the chip. | 
 |  * Enabling function 1 (IDE controller of the chip. | 
 |  */ | 
 |  | 
 | #include <common.h> | 
 | #include <config.h> | 
 |  | 
 | #ifdef CFG_WINBOND_83C553 | 
 |  | 
 | #include <asm/io.h> | 
 | #include <pci.h> | 
 |  | 
 | #include <w83c553f.h> | 
 |  | 
 | #define out8(addr,val)	do { \ | 
 | 			out_8((u8*) (addr),(val)); udelay(1); \ | 
 | 			} while (0) | 
 | #define out16(addr,val)	do { \ | 
 | 			out_be16((u16*) (addr),(val)); udelay(1); \ | 
 | 			} while (0) | 
 |  | 
 | extern uint ide_bus_offset[CFG_IDE_MAXBUS]; | 
 |  | 
 | void initialise_pic(void); | 
 | void initialise_dma(void); | 
 |  | 
 | void initialise_w83c553f(void) | 
 | { | 
 | 	pci_dev_t devbusfn; | 
 | 	unsigned char reg8; | 
 | 	unsigned short reg16; | 
 | 	unsigned int reg32; | 
 |  | 
 | 	devbusfn = pci_find_device(W83C553F_VID, W83C553F_DID, 0); | 
 | 	if (devbusfn == -1) | 
 | 	{ | 
 | 		printf("Error: Cannot find W83C553F controller on any PCI bus."); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	pci_read_config_word(devbusfn, PCI_COMMAND, ®16); | 
 | 	reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; | 
 | 	pci_write_config_word(devbusfn, PCI_COMMAND, reg16); | 
 |  | 
 | 	pci_read_config_byte(devbusfn, WINBOND_IPADCR, ®8); | 
 | 	/* 16 MB ISA memory space */ | 
 | 	reg8 |= (IPADCR_IPATOM4 | IPADCR_IPATOM5 | IPADCR_IPATOM6 | IPADCR_IPATOM7); | 
 | 	reg8 &= ~IPADCR_MBE512; | 
 | 	pci_write_config_byte(devbusfn, WINBOND_IPADCR, reg8); | 
 |  | 
 | 	pci_read_config_byte(devbusfn, WINBOND_CSCR, ®8); | 
 | 	/* switch off BIOS write protection */ | 
 | 	reg8 |= CSCR_UBIOSCSE; | 
 | 	reg8 &= ~CSCR_BIOSWP; | 
 | 	pci_write_config_byte(devbusfn, WINBOND_CSCR, reg8); | 
 |  | 
 | 	/* | 
 | 	 * Interrupt routing: | 
 | 	 *  - IDE  -> IRQ 9/0 | 
 | 	 *  - INTA -> IRQ 10 | 
 | 	 *  - INTB -> IRQ 11 | 
 | 	 *  - INTC -> IRQ 14 | 
 | 	 *  - INTD -> IRQ 15 | 
 | 	 */ | 
 | 	pci_write_config_byte(devbusfn, WINBOND_IDEIRCR, 0x90); | 
 | 	pci_write_config_word(devbusfn, WINBOND_PCIIRCR, 0xABEF); | 
 |  | 
 | 	/* | 
 | 	 * Read IDE bus offsets from function 1 device. | 
 | 	 * We must unmask the LSB indicating that ist is an IO address. | 
 | 	 */ | 
 | 	devbusfn |= PCI_BDF(0,0,1); | 
 |  | 
 | 	/* | 
 | 	 * Switch off legacy IRQ for IDE and IDE port 1. | 
 | 	 */ | 
 | 	pci_write_config_byte(devbusfn, 0x09, 0x8F); | 
 |  | 
 | 	pci_read_config_dword(devbusfn, WINDOND_IDECSR, ®32); | 
 | 	reg32 &= ~(IDECSR_LEGIRQ | IDECSR_P1EN | IDECSR_P1F16); | 
 | 	pci_write_config_dword(devbusfn, WINDOND_IDECSR, reg32); | 
 |  | 
 | 	pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &ide_bus_offset[0]); | 
 | 	ide_bus_offset[0] &= ~1; | 
 | #if CFG_IDE_MAXBUS > 1 | 
 | 	pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2, &ide_bus_offset[1]); | 
 | 	ide_bus_offset[1] &= ~1; | 
 | #endif | 
 |  | 
 | 	/* | 
 | 	 * Enable function 1, IDE -> busmastering and IO space access | 
 | 	 */ | 
 | 	pci_read_config_word(devbusfn, PCI_COMMAND, ®16); | 
 | 	reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO; | 
 | 	pci_write_config_word(devbusfn, PCI_COMMAND, reg16); | 
 |  | 
 | 	/* | 
 | 	 * Initialise ISA interrupt controller | 
 | 	 */ | 
 | 	initialise_pic(); | 
 |  | 
 | 	/* | 
 | 	 * Initialise DMA controller | 
 | 	 */ | 
 | 	initialise_dma(); | 
 | } | 
 |  | 
 | void initialise_pic(void) | 
 | { | 
 | 	out8(W83C553F_PIC1_ICW1, 0x11); | 
 | 	out8(W83C553F_PIC1_ICW2, 0x08); | 
 | 	out8(W83C553F_PIC1_ICW3, 0x04); | 
 | 	out8(W83C553F_PIC1_ICW4, 0x01); | 
 | 	out8(W83C553F_PIC1_OCW1, 0xfb); | 
 | 	out8(W83C553F_PIC1_ELC, 0x20); | 
 |  | 
 | 	out8(W83C553F_PIC2_ICW1, 0x11); | 
 | 	out8(W83C553F_PIC2_ICW2, 0x08); | 
 | 	out8(W83C553F_PIC2_ICW3, 0x02); | 
 | 	out8(W83C553F_PIC2_ICW4, 0x01); | 
 | 	out8(W83C553F_PIC2_OCW1, 0xff); | 
 | 	out8(W83C553F_PIC2_ELC, 0xce); | 
 |  | 
 | 	out8(W83C553F_TMR1_CMOD, 0x74); | 
 |  | 
 | 	out8(W83C553F_PIC2_OCW1, 0x20); | 
 | 	out8(W83C553F_PIC1_OCW1, 0x20); | 
 |  | 
 | 	out8(W83C553F_PIC2_OCW1, 0x2b); | 
 | 	out8(W83C553F_PIC1_OCW1, 0x2b); | 
 | } | 
 |  | 
 | void initialise_dma(void) | 
 | { | 
 | 	unsigned int channel; | 
 | 	unsigned int rvalue1, rvalue2; | 
 |  | 
 | 	/* perform a H/W reset of the devices */ | 
 |  | 
 | 	out8(W83C553F_DMA1 + W83C553F_DMA1_MC, 0x00); | 
 | 	out16(W83C553F_DMA2 + W83C553F_DMA2_MC, 0x0000); | 
 |  | 
 | 	/* initialise all channels to a sane state */ | 
 |  | 
 | 	for (channel = 0; channel < 4; channel++) { | 
 | 		/* | 
 | 		 * dependent upon the channel, setup the specifics: | 
 | 		 * | 
 | 		 * demand | 
 | 		 * address-increment | 
 | 		 * autoinitialize-disable | 
 | 		 * verify-transfer | 
 | 		 */ | 
 |  | 
 | 		switch (channel) { | 
 | 		case 0: | 
 | 			rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH0SEL|W83C553F_MODE_TT_VERIFY); | 
 | 			rvalue2 = (W83C553F_MODE_TM_CASCADE|W83C553F_MODE_CH0SEL); | 
 | 			break; | 
 | 	    	case 1: | 
 | 			rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY); | 
 | 			rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY); | 
 | 			break; | 
 | 		case 2: | 
 | 			rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY); | 
 | 			rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY); | 
 | 			break; | 
 | 		case 3: | 
 | 			rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY); | 
 | 			rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY); | 
 | 			break; | 
 | 		default: | 
 | 			rvalue1 = 0x00; | 
 | 			rvalue2 = 0x00; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* write to write mode registers */ | 
 |  | 
 | 		out8(W83C553F_DMA1 + W83C553F_DMA1_WM, rvalue1 & 0xFF); | 
 | 		out16(W83C553F_DMA2 + W83C553F_DMA2_WM, rvalue2 & 0x00FF); | 
 | 	} | 
 |  | 
 | 	/* enable all channels */ | 
 |  | 
 | 	out8(W83C553F_DMA1 + W83C553F_DMA1_CM, 0x00); | 
 | 	out16(W83C553F_DMA2 + W83C553F_DMA2_CM, 0x0000); | 
 | 	/* | 
 | 	 * initialize the global DMA configuration | 
 | 	 * | 
 | 	 * DACK# active low | 
 | 	 * DREQ active high | 
 | 	 * fixed priority | 
 | 	 * channel group enable | 
 | 	 */ | 
 |  | 
 | 	out8(W83C553F_DMA1 + W83C553F_DMA1_CS, 0x00); | 
 | 	out16(W83C553F_DMA2 + W83C553F_DMA2_CS, 0x0000); | 
 | } | 
 |  | 
 | #endif /* CFG_WINBOND_83C553 */ |