blob: e050268d3df3e22e5b1e523e5ea63190f041d653 [file] [log] [blame]
/*
*
* Copyright (C) 2015 Amlogic, Inc. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include <asm/arch/timing.h>
#include <asm/arch/ddr_define.h>
/* DDR freq range */
#define CONFIG_DDR_CLK_LOW 20
#define CONFIG_DDR_CLK_HIGH 1500
/* DON'T OVER THESE RANGE */
#if (CONFIG_DDR_CLK < CONFIG_DDR_CLK_LOW) || (CONFIG_DDR_CLK > CONFIG_DDR_CLK_HIGH)
#error "Over DDR PLL range! Please check CONFIG_DDR_CLK in board header file! \n"
#endif
/* CPU freq range */
#define CONFIG_CPU_CLK_LOW 600
#define CONFIG_CPU_CLK_HIGH 2000
/* DON'T OVER THESE RANGE */
#if (CONFIG_CPU_CLK < CONFIG_CPU_CLK_LOW) || (CONFIG_CPU_CLK > CONFIG_CPU_CLK_HIGH)
#error "Over CPU PLL range! Please check CONFIG_CPU_CLK in board header file! \n"
#endif
#define DDR3_DRV_40OHM 0
#define DDR3_DRV_34OHM 1
#define DDR3_ODT_0OHM 0
#define DDR3_ODT_60OHM 1
#define DDR3_ODT_120OHM 2
#define DDR3_ODT_40OHM 3
#define DDR3_ODT_20OHM 4
#define DDR3_ODT_30OHM 5
/* lpddr2 drv odt */
#define LPDDR2_DRV_34OHM 1
#define LPDDR2_DRV_40OHM 2
#define LPDDR2_DRV_48OHM 3
#define LPDDR2_DRV_60OHM 4
#define LPDDR2_DRV_80OHM 6
#define LPDDR2_DRV_120OHM 7
#define LPDDR2_ODT_0OHM 0
/* lpddr3 drv odt */
#define LPDDR3_DRV_34OHM 1
#define LPDDR3_DRV_40OHM 2
#define LPDDR3_DRV_48OHM 3
#define LPDDR3_DRV_60OHM 4
#define LPDDR3_DRV_80OHM 6
#define LPDDR3_DRV_34_40OHM 9
#define LPDDR3_DRV_40_48OHM 10
#define LPDDR3_DRV_34_48OHM 11
#define LPDDR3_ODT_0OHM 0
#define LPDDR3_ODT_60OHM 1
#define LPDDR3_ODT_120OHM 2
#define LPDDR3_ODT_240OHM 3
#define DDR4_DRV_34OHM 0
#define DDR4_DRV_48OHM 1
#define DDR4_ODT_0OHM 0
#define DDR4_ODT_60OHM 1
#define DDR4_ODT_120OHM 2
#define DDR4_ODT_40OHM 3
#define DDR4_ODT_240OHM 4
#define DDR4_ODT_48OHM 5
#define DDR4_ODT_80OHM 6
#define DDR4_ODT_34OHM 7
#if ((CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_DDR3) || (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_AUTO))
#define CFG_DDR_DRV DDR3_DRV_40OHM
#define CFG_DDR_ODT DDR3_ODT_120OHM
#elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_LPDDR2)
#define CFG_DDR_DRV LPDDR2_DRV_48OHM
#define CFG_DDR_ODT DDR3_ODT_120OHM
#elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_LPDDR3)
#define CFG_DDR_DRV LPDDR3_DRV_48OHM
#define CFG_DDR_ODT LPDDR3_ODT_0OHM
#elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_DDR4)
#define CFG_DDR_DRV DDR4_DRV_34OHM //useless, no effect
#define CFG_DDR_ODT DDR4_ODT_60OHM //useless, no effect
#endif
#define CFG_DDR4_DRV DDR4_DRV_34OHM //ddr4 driver use this one
#define CFG_DDR4_ODT DDR4_ODT_60OHM //ddr4 driver use this one
//#define CFG_DDR4_DRV DDR4_DRV_48OHM//DDR4_DRV_48OHM //ddr4 driver use this one
//#define CFG_DDR4_ODT DDR4_ODT_48OHM// DDR4_ODT_80OHM //ddr4 driver use this one
#if ((CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_DDR4) || (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_AUTO))
#define CONFIG_SOC_VREF 1+ (50+((50*48)/(48+480/(6+1)))) // 880/12 //(50+((50*48)/(48+160))) //0//50+50*drv/(drv+odt) (738/12) //0 //0 is auto --70 ---range 44.07---88.04 %
#define CONFIG_DRAM_VREF 1+ (50+((50*37)/(37+48)))// 860/12 // 0// (810/12) // 0 //77 //0 //0 is auto ---70 --range -- 45---92.50 %
#elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_LPDDR3)
#define CONFIG_SOC_VREF 51
#define CONFIG_DRAM_VREF 51
#else
#define CONFIG_SOC_VREF 51
#define CONFIG_DRAM_VREF 51
#endif
#define CONFIG_ZQ_VREF 51//60 //700/12// 60//0 //(50) % //tune ddr4 ,ddr3 use 0
/*
* these parameters are corresponding to the pcb layout,
* please don't enable this function unless these signals
* has been measured by oscilloscope.
*/
#ifdef CONFIG_DDR_CMD_BDL_TUNE
#define DDR_AC_LCDLR 0
#define DDR_CK0_BDL 18
#define DDR_RAS_BDL 18
#define DDR_CAS_BDL 24
#define DDR_WE_BDL 21
#define DDR_BA0_BDL 16
#define DDR_BA1_BDL 2
#define DDR_BA2_BDL 13
#define DDR_ACPDD_BDL 27
#define DDR_CS0_BDL 27
#define DDR_CS1_BDL 27
#define DDR_ODT0_BDL 27
#define DDR_ODT1_BDL 27
#define DDR_CKE0_BDL 27
#define DDR_CKE1_BDL 27
#define DDR_A0_BDL 14
#define DDR_A1_BDL 9
#define DDR_A2_BDL 5
#define DDR_A3_BDL 18
#define DDR_A4_BDL 4
#define DDR_A5_BDL 16
#define DDR_A6_BDL 1
#define DDR_A7_BDL 10
#define DDR_A8_BDL 4
#define DDR_A9_BDL 7
#define DDR_A10_BDL 10
#define DDR_A11_BDL 9
#define DDR_A12_BDL 6
#define DDR_A13_BDL 16
#define DDR_A14_BDL 8
#define DDR_A15_BDL 27
#endif
/* CAUTION!! */
/*
* For DDR3:
* 7-7-7: CONFIG_DDR_CLK range 375~ 533
* 9-9-9: CONFIG_DDR_CLK range 533~ 667
* 11-11-11: CONFIG_DDR_CLK range 667~ 800
* 12-12-12: CONFIG_DDR_CLK range 800~ 933
* 13-13-13: CONFIG_DDR_CLK range 933~1066
* 14-14-14: CONFIG_DDR_CLK range 1066~1200
*/
ddr_timing_t __ddr_timming[] = {
//ddr3_7_7_7
{
.identifier = CONFIG_DDR_TIMMING_DDR3_7,
.cfg_ddr_rtp = (6),
.cfg_ddr_wtr = (7),
.cfg_ddr_rp = (7),
.cfg_ddr_rcd = (7),
.cfg_ddr_ras = (20),
.cfg_ddr_rrd = (6),
.cfg_ddr_rc = (27),
.cfg_ddr_mrd = (4),
.cfg_ddr_mod = (12),
.cfg_ddr_faw = (27),
.cfg_ddr_rfc = (160),
.cfg_ddr_wlmrd = (40),
.cfg_ddr_wlo = (6),
.cfg_ddr_xs = (512),
.cfg_ddr_xp = (7),
.cfg_ddr_cke = (4),
.cfg_ddr_dllk = (512),
.cfg_ddr_rtodt = (0),
.cfg_ddr_rtw = (4),
.cfg_ddr_refi = (78-2),
.cfg_ddr_refi_mddr3 = (4),
.cfg_ddr_cl = (7),
.cfg_ddr_wr = (12),
.cfg_ddr_cwl = (5),
.cfg_ddr_al = (0),
.cfg_ddr_exsr = (512),
.cfg_ddr_dqs = (4),
.cfg_ddr_cksre = (15),
.cfg_ddr_cksrx = (15),
.cfg_ddr_zqcs = (64),
.cfg_ddr_zqcl = (512),
.cfg_ddr_xpdll = (20),
.cfg_ddr_zqcsi = (1000),
},
//ddr3_9_9_9
{
.identifier = CONFIG_DDR_TIMMING_DDR3_9,
.cfg_ddr_rtp = (6),
.cfg_ddr_wtr = (7),
.cfg_ddr_rp = (9),
.cfg_ddr_rcd = (9),
.cfg_ddr_ras = (27),
.cfg_ddr_rrd = (6),
.cfg_ddr_rc = (33),
.cfg_ddr_mrd = (4),
.cfg_ddr_mod = (12),
.cfg_ddr_faw = (30),
.cfg_ddr_rfc = (196),
.cfg_ddr_wlmrd = (40),
.cfg_ddr_wlo = (6),
.cfg_ddr_xs = (512),
.cfg_ddr_xp = (7),
.cfg_ddr_cke = (4),
.cfg_ddr_dllk = (512),
.cfg_ddr_rtodt = (0),
.cfg_ddr_rtw = (6),
.cfg_ddr_refi = (78-2),
.cfg_ddr_refi_mddr3 = (4),
.cfg_ddr_cl = (9),
.cfg_ddr_wr = (12),
.cfg_ddr_cwl = (7),
.cfg_ddr_al = (0),
.cfg_ddr_exsr = (512),
.cfg_ddr_dqs = (23),
.cfg_ddr_cksre = (15),
.cfg_ddr_cksrx = (15),
.cfg_ddr_zqcs = (64),
.cfg_ddr_zqcl = (136),
.cfg_ddr_xpdll = (20),
.cfg_ddr_zqcsi = (1000),
},
//ddr3_11_11_11
{
.identifier = CONFIG_DDR_TIMMING_DDR3_11,
.cfg_ddr_rtp = (7),
.cfg_ddr_wtr = (7),
.cfg_ddr_rp = (11),
.cfg_ddr_rcd = (11),
.cfg_ddr_ras = (35),
.cfg_ddr_rrd = (7),
.cfg_ddr_rc = (45),
.cfg_ddr_mrd = (6),
.cfg_ddr_mod = (12),
.cfg_ddr_faw = (33),
.cfg_ddr_rfc = (280),
.cfg_ddr_wlmrd = (40),
.cfg_ddr_wlo = (7),
.cfg_ddr_xs = (512),
.cfg_ddr_xp = (5),
.cfg_ddr_cke = (4),
.cfg_ddr_dllk = (512),
.cfg_ddr_rtodt = (0),
.cfg_ddr_rtw = (7),
.cfg_ddr_refi = (78-2),
.cfg_ddr_refi_mddr3 = (4),
.cfg_ddr_cl = (11),
.cfg_ddr_wr = (12),
.cfg_ddr_cwl = (8),
.cfg_ddr_al = (0),
.cfg_ddr_exsr = (512),
.cfg_ddr_dqs = (23),
.cfg_ddr_cksre = (15),
.cfg_ddr_cksrx = (15),
.cfg_ddr_zqcs = (64),
.cfg_ddr_zqcl = (136),
.cfg_ddr_xpdll = (23),
.cfg_ddr_zqcsi = (1000),
},
//ddr3_13_13_13
{
.identifier = CONFIG_DDR_TIMMING_DDR3_13,
.cfg_ddr_rtp = (7),
.cfg_ddr_wtr = (7),
.cfg_ddr_rp = (13),
.cfg_ddr_rcd = (13),
.cfg_ddr_ras = (37),
.cfg_ddr_rrd = (7),
.cfg_ddr_rc = (52),
.cfg_ddr_mrd = (6),
.cfg_ddr_mod = (12),
.cfg_ddr_faw = (33),
.cfg_ddr_rfc = (280),
.cfg_ddr_wlmrd = (40),
.cfg_ddr_wlo = (7),
.cfg_ddr_xs = (512),
.cfg_ddr_xp = (7),
.cfg_ddr_cke = (5),
.cfg_ddr_dllk = (512),
.cfg_ddr_rtodt = (0),
.cfg_ddr_rtw = (7),
.cfg_ddr_refi = (78-2),
.cfg_ddr_refi_mddr3 = (4),
.cfg_ddr_cl = (13),
.cfg_ddr_wr = (16),
.cfg_ddr_cwl = (9),
.cfg_ddr_al = (0),
.cfg_ddr_exsr = (512),
.cfg_ddr_dqs = (23),
.cfg_ddr_cksre = (15),
.cfg_ddr_cksrx = (15),
.cfg_ddr_zqcs = (64),
.cfg_ddr_zqcl = (136),
.cfg_ddr_xpdll = (23),
.cfg_ddr_zqcsi = (1000),
},
/* ddr4 1600 timing */
{
.identifier = CONFIG_DDR_TIMMING_DDR4_1600,
.cfg_ddr_rtp = (4),
.cfg_ddr_wtr = (6),
.cfg_ddr_rp = (11),
.cfg_ddr_rcd = (11),
.cfg_ddr_ras = (35),
.cfg_ddr_rrd = (4),
.cfg_ddr_rc = (46),//RAS+RP
.cfg_ddr_mrd = (8),
.cfg_ddr_mod = (24),
.cfg_ddr_faw = (28),
.cfg_ddr_rfc = (280),
.cfg_ddr_wlmrd = (40),
.cfg_ddr_wlo = (8),
.cfg_ddr_xs = (512),
.cfg_ddr_xp = (7),
.cfg_ddr_cke = (5),
.cfg_ddr_dllk = (1024), //597 768 1024
.cfg_ddr_rtodt = (0),
.cfg_ddr_rtw = (7),
.cfg_ddr_refi = (78-2),
.cfg_ddr_refi_mddr3 = (4),
.cfg_ddr_cl = (11),
.cfg_ddr_wr = (13), //15NS+1CLK
.cfg_ddr_cwl = (11),
.cfg_ddr_al = (0),
.cfg_ddr_exsr = (1024), //597 768 1024
.cfg_ddr_dqs = (23),
.cfg_ddr_cksre = (15),
.cfg_ddr_cksrx = (15),
.cfg_ddr_zqcs = 128,
.cfg_ddr_zqcl = (256),
.cfg_ddr_xpdll = (23),
.cfg_ddr_zqcsi = (1000),
.cfg_ddr_tccdl = (5),
},
/* ddr4 2400 timing */
{
.identifier = CONFIG_DDR_TIMMING_DDR4_2400,
.cfg_ddr_rtp = 9,//(4),
.cfg_ddr_wtr = 9,//(6),
.cfg_ddr_rp = 15*1.2,//(11),
.cfg_ddr_rcd = 15*1.2,//(11),
.cfg_ddr_ras = 35*1.2,//(35),
.cfg_ddr_rrd = (8),
.cfg_ddr_rc =50*1.2,// (46),//RAS+RP
.cfg_ddr_mrd = (8),
.cfg_ddr_mod = (24),
.cfg_ddr_faw = 35*1.2,//(28),
.cfg_ddr_rfc = 350*1.2,//(280),
.cfg_ddr_wlmrd = (40),
.cfg_ddr_wlo = 9.5*1.2,//(8),
.cfg_ddr_xs = (512),
.cfg_ddr_xp = (7),
.cfg_ddr_cke = (5),
.cfg_ddr_dllk = (1024), //597 768 1024
.cfg_ddr_rtodt = (0),
.cfg_ddr_rtw = (9),
.cfg_ddr_refi = (78-2),
.cfg_ddr_refi_mddr3 = (4),
.cfg_ddr_cl = 15*1.2,// (11),
.cfg_ddr_wr = 15*1.2,// (13), //15NS+1CLK
.cfg_ddr_cwl = 12,// (11),
.cfg_ddr_al = (0),
.cfg_ddr_exsr = (1024), //597 768 1024
.cfg_ddr_dqs = 9,//12,//(23), //6 7 8 9 10 11 ok ,bit0-3 max is 15 ,why use 15 is bad 2016_11_10 jiaxing ,test should change with ddr frequency ?
.cfg_ddr_cksre = (15),
.cfg_ddr_cksrx = (15),
.cfg_ddr_zqcs = 128,
.cfg_ddr_zqcl = (256),
.cfg_ddr_xpdll = (23),
.cfg_ddr_zqcsi = (1000),
.cfg_ddr_tccdl = (6),
},
/* lpddr3 timing */
{
.identifier = CONFIG_DDR_TIMMING_LPDDR3,
.cfg_ddr_rtp = 6,// (6),0
.cfg_ddr_wtr = (6+2),
.cfg_ddr_rp = (17),
.cfg_ddr_rcd = (15),
.cfg_ddr_ras = (34),
.cfg_ddr_rrd = (8),
.cfg_ddr_rc = (51),
.cfg_ddr_mrd = (11),
.cfg_ddr_mod = (12),//12-17
.cfg_ddr_faw = (40),
.cfg_ddr_rfc = (168),
.cfg_ddr_wlmrd = (32),
.cfg_ddr_wlo = (8),
.cfg_ddr_xs = (512),
.cfg_ddr_xp = (6),
.cfg_ddr_cke = 7,//(6),//need <=7
.cfg_ddr_dllk = (512),
.cfg_ddr_rtodt = (0),
.cfg_ddr_rtw = (7),
.cfg_ddr_refi = (39-2),
.cfg_ddr_refi_mddr3 = (0),
.cfg_ddr_cl = (12),
.cfg_ddr_wr = (12),
.cfg_ddr_cwl = (6),
.cfg_ddr_al = (0),
.cfg_ddr_exsr = (112),
.cfg_ddr_dqs = 9,//9,// (4),//rank0 rank1 turn aroud time jiaxing modify should big for 2rank lpddr3
.cfg_ddr_cksre = 12,// (12),//pctl need 2?
.cfg_ddr_cksrx = 12,// (12),//pctl need 2?
.cfg_ddr_zqcs = (100),
.cfg_ddr_zqcl = (288),
.cfg_ddr_xpdll = (12),
.cfg_ddr_zqcsi = (1000),
// .cfg_ddr_rpab = (17),
// .cfg_ddr_rppb = (15),
// .cfg_ddr_tdqsck = (3),//2500-5500ps if no gate training should (int+1)
// .cfg_ddr_tdqsckmax = (5),
// .cfg_ddr_tckesr = (12),
// .cfg_ddr_tdpd = (500),
// .cfg_ddr_taond_aofd = 2,
}
};
ddr_set_t __ddr_setting = {
/* common and function defines */
.ddr_channel_set = CONFIG_DDR_CHANNEL_SET,
.ddr_type = CONFIG_DDR_TYPE,
.ddr_clk = CONFIG_DDR_CLK,
.ddr4_clk = CONFIG_DDR4_CLK,
.ddr_base_addr = CFG_DDR_BASE_ADDR,
.ddr_start_offset = CFG_DDR_START_OFFSET,
.ddr_timing_ind = 0,
.ddr_size = CONFIG_DDR_SIZE,
.ddr_pll_ctrl = (0),
.ddr_dmc_ctrl = 0,
#if (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_LPDDR3)
#if (CONFIG_LPDDR_REMAP_SET == LPDDR_DIE_ROW_COL_R14_C9)
.ddr0_addrmap = {
[0]=( 5 | 6 << 5 | 7 << 10 | 8 << 15 | 9 << 20 | 10 << 25) ,
[1]=( 11| 0<< 5 | 0 << 10 | 14 << 15 | 15 << 20 | 16 << 25 ) ,
[2]=( 17| 18 << 5 | 19 << 10 | 20 << 15 | 21<< 20 | 22 << 25 ) ,
[3]=( 23| 24 << 5 | 25 << 10 | 26 << 15 | 27 << 20 |29 << 25 ) ,
[4]=( 0| 12 << 5 | 13 << 10 | 28 << 15 | 0 << 20 | 0 << 25 ) ,
},
.ddr1_addrmap = {
[0]=( 5 | 6 << 5 | 7 << 10 | 8 << 15 | 9 << 20 | 10 << 25) ,
[1]=( 11| 0<< 5 | 0 << 10 | 14 << 15 | 15 << 20 | 16 << 25 ) ,
[2]=( 17| 18 << 5 | 19 << 10 | 20 << 15 | 21<< 20 | 22 << 25 ) ,
[3]=( 23| 24 << 5 | 25 << 10 | 26 << 15 | 27 << 20 |29 << 25 ) ,
[4]=( 0| 12 << 5 | 13 << 10 | 28 << 15 | 0 << 20 | 0 << 25 ) ,
},
#elif (CONFIG_LPDDR_REMAP_SET== LPDDR_DIE_ROW_COL_R13_C10)
.ddr0_addrmap = {
[0]=( 5 | 6 << 5 | 7 << 10 | 8 << 15 | 9 << 20 | 10 << 25) ,
[1]=( 11| 29 << 5 | 0 << 10 | 14 << 15 | 15 << 20 | 16 << 25 ) ,
[2]=( 17| 18 << 5 | 19 << 10 | 20 << 15 | 21<< 20 | 22 << 25 ) ,
[3]=( 23| 24 << 5 | 25 << 10 | 26 << 15 | 27 << 20 | 30 << 25 ) ,
[4]=( 31| 12 << 5 | 13 << 10 | 28 << 15 | 0 << 20 | 0 << 25 ) ,
},
.ddr1_addrmap = {
[0]=( 5 | 6 << 5 | 7 << 10 | 8 << 15 | 9 << 20 | 10 << 25) ,
[1]=( 11| 29 << 5 | 0 << 10 | 14 << 15 | 15 << 20 | 16 << 25 ) ,
[2]=( 17| 18 << 5 | 19 << 10 | 20 << 15 | 21<< 20 | 22 << 25 ) ,
[3]=( 23| 24 << 5 | 25 << 10 | 26 << 15 | 27 << 20 | 30 << 25 ) ,
[4]=( 31| 12 << 5 | 13 << 10 | 28 << 15 | 0 << 20 | 0 << 25 ) ,
},
#endif /*CONFIG_LPDDR_REMAP_SET*/
#else
.ddr0_addrmap = {0},
.ddr1_addrmap = {0},
#endif /*CONFIG_DDR_TYPE_LPDDR3*/
.ddr_2t_mode = 1,
.ddr_full_test = CONFIG_DDR_FULL_TEST,
#if (0 == CONFIG_DDR_SIZE)
.ddr_size_detect = 1,
#else
.ddr_size_detect = 0,
#endif
.ddr_drv = CFG_DDR_DRV,
.ddr_odt = CFG_DDR_ODT,
.ddr4_drv = CFG_DDR4_DRV,
.ddr4_odt = CFG_DDR4_ODT,
/* pub defines */
.t_pub_ptr = {
[0] = ( 6 | (320 << 6) | (80 << 21)),
[1] = (120 | (1000 << 16)),
[2] = 0,
[3] = (20000 | (136 << 20)),
[4] = (1000 | (180 << 16)),
}, //PUB PTR0-3
.t_pub_odtcr = 0x00030000,
.t_pub_mr = {
(0X0 | (0X1 << 2) | (0X0 << 3) | (0X0 << 4) | (0X0 << 7) | (0X0 << 8) | (0X7 << 9) | (1 << 12)),
(0X6|(1<<6)),
0X20,
0,
},
.t_pub_dtpr = {0},
.t_pub_pgcr0 = 0x07d81e3f, //PUB PGCR0
.t_pub_pgcr1 = 0x02004620, //PUB PGCR1
.t_pub_pgcr2 = 0x00f05f97, //PUB PGCR2
//.t_pub_pgcr2 = 0x01f12480, //PUB PGCR2
.t_pub_pgcr3 = 0xc0aae860, //PUB PGCR3
.t_pub_dxccr = 0x20c01ee4, //PUB DXCCR
.t_pub_aciocr = {0}, //PUB ACIOCRx
.t_pub_dx0gcr = {0}, //PUB DX0GCRx
.t_pub_dx1gcr = {0}, //PUB DX1GCRx
.t_pub_dx2gcr = {0}, //PUB DX2GCRx
.t_pub_dx3gcr = {0}, //PUB DX3GCRx
#if (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_DDR3)
.t_pub_dcr = 0XB, //PUB DCR
.t_pub_dtcr0 = 0x80003187, //PUB DTCR //S905 use 0x800031c7
.t_pub_dtcr1 = 0x00010237, //PUB DTCR
.t_pub_dsgcr = 0x020641b,
#elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_DDR4)
.t_pub_dcr = 0X40C, //PUB DCR
.t_pub_dtcr0 = 0x800031c7, //PUB DTCR //S905 use 0x800031c7
.t_pub_dtcr1 = 0x00010237,
.t_pub_dsgcr = 0x020641b,
#elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_LPDDR3)
.t_pub_dcr = 0X89, //PUB DCR
.t_pub_dtcr0 = 0x80003187, //PUB DTCR //S905 use 0x800031c7
.t_pub_dtcr1 = 0x00010237,
.t_pub_dsgcr = 0x02064db,
#elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_AUTO)
.t_pub_dcr = 0XB, //PUB DCR
.t_pub_dtcr0 = 0x80003187, //PUB DTCR //S905 use 0x800031c7
.t_pub_dtcr1 = 0x00010237, //PUB DTCR
.t_pub_dsgcr = 0x020641b,
#endif
.t_pub_vtcr1 = 0x0fc00172,
.t_pub_dtar = (0X0 | (0X0 <<12) | (0 << 28)),
#if (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_LPDDR3)
//lpddr3
.t_pub_zq0pr = 0x0ca1c, //0x0ca1c, //PUB ZQ0PR //lpddr3
.t_pub_zq1pr = 0x1cf3c, //PUB ZQ1PR
.t_pub_zq2pr = 0x1cf3c, //PUB ZQ2PR
.t_pub_zq3pr = 0x1dd1d, //PUB ZQ3PR
/* 2layer board
.t_pub_zq0pr = 0x00007759, //PUB ZQ0PR, 0x5aa59,0x59959, 0x58859, //99drriver s912 ddr4 maybe 950m is bad
.t_pub_zq1pr = 0x0006fc5d, //PUB ZQ1PR//0x8fc5d, 0x4f95d,
.t_pub_zq2pr = 0x0006fc5d, //PUB ZQ2PR//0x3fc5d, 0x4f95d,
*/
#elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_DDR4)
/* 4layer ddr4 */
.t_pub_zq0pr = 0x0995d, //PUB ZQ0PR
.t_pub_zq1pr = 0x3f95d, //PUB ZQ1PR
.t_pub_zq2pr = 0x3f95d, //PUB ZQ2PR
.t_pub_zq3pr = 0x1dd1d, //PUB ZQ3PR
#else // ddr3 and auto
/* p212 4layer board ddr3 */
.t_pub_zq0pr = 0x5d95d, //PUB ZQ0PR
.t_pub_zq1pr = 0x5d95d, //PUB ZQ1PR
.t_pub_zq2pr = 0x5d95d, //PUB ZQ2PR
.t_pub_zq3pr = 0x1dd1d, //PUB ZQ3PR
#endif
/* pctl0 defines */
/* pctl1 use same define as pctl0 */
.t_pctl0_1us_pck = CONFIG_DDR_CLK / 2, //PCTL TOGCNT1U
.t_pctl0_100ns_pck = CONFIG_DDR_CLK / 20, //PCTL TOGCNT100N
.t_pctl0_init_us = 2, //PCTL TINIT
.t_pctl0_rsth_us = 2, //PCTL TRSTH
.t_pctl0_mcfg = 0XA2F01, //PCTL MCFG default 1T
//.t_pctl0_mcfg1 = 0X80000000, //PCTL MCFG1
.t_pctl0_mcfg1 = 0, //[B10,B9,B8] tfaw_cfg_offset
//tFAW= (4 + MCFG.tfaw_cfg)*tRRD - tfaw_cfg_offset, //PCTL MCFG1
.t_pctl0_scfg = 0xF01, //PCTL SCFG
.t_pctl0_sctl = 0x1, //PCTL SCTL
.t_pctl0_ppcfg = 0,
.t_pctl0_dfistcfg0 = 0x4,
.t_pctl0_dfistcfg1 = 0x1,
.t_pctl0_dfitctrldelay = 2,
.t_pctl0_dfitphywrdata = 2,
.t_pctl0_dfitphywrlta = 7,
.t_pctl0_dfitrddataen = 8,
.t_pctl0_dfitphyrdlat = 22,
.t_pctl0_dfitdramclkdis = 1,
.t_pctl0_dfitdramclken = 1,
.t_pctl0_dfitphyupdtype0 = 16,
.t_pctl0_dfitphyupdtype1 = 16,
.t_pctl0_dfitctrlupdmin = 16,
.t_pctl0_dfitctrlupdmax = 64,
.t_pctl0_dfiupdcfg = 0x3,
.t_pctl0_cmdtstaten = 1,
//.t_pctl0_dfiodtcfg = 8,
//.t_pctl0_dfiodtcfg1 = ( 0x0 | (0x6 << 16) ),
.t_pctl0_dfiodtcfg = (1<<3)|(1<<11),
.t_pctl0_dfiodtcfg1 = (0x0 | (0x6 << 16)),
.t_pctl0_dfilpcfg0 = ( 1 | (3 << 4) | (1 << 8) | (13 << 12) | (7 <<16) | (1 <<24) | ( 3 << 28)),
///*lpddr3
#if (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_LPDDR3)
.t_pub_acbdlr0 = 0, //CK0 delay fine tune TAKE CARE LPDDR3 ADD/CMD DELAY
.t_pub_aclcdlr = 0,
.t_pub_acbdlr3 = 0x2020,//0, //CK0 delay fine tune b-3f //lpddr3 tianhe 2016-10-13
#elif (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_DDR4)
//2layer board DDR4
.t_pub_acbdlr0 = 0, //0x3f,
.t_pub_aclcdlr = 0, //0x28,//0x18, ///1t ,if 2t can add some value
.t_pub_acbdlr3 = 0, //0x10,// 0x10,//0xa, //cs add 22ohm 08 0ohm 0x10
#else // ddr3 and auto
//4layer ddr3
.t_pub_acbdlr0 = 0,
.t_pub_aclcdlr = 0,//0x18, ///1t ,if 2t can add some value
.t_pub_acbdlr3 = 0,//0xa, //cs
#endif
.t_pub_soc_vref_dram_vref =((((CONFIG_SOC_VREF<45)?(0):((((CONFIG_SOC_VREF*1000-44070)/698)>0X3F)?(0X3F):(((CONFIG_SOC_VREF*1000-44070)/698))))<<8)|(
(((CONFIG_DRAM_VREF))<45)?(0):((((CONFIG_DRAM_VREF))<61)?((((((CONFIG_DRAM_VREF*1000-45000)/650)>0X32)?(0X32):(((CONFIG_DRAM_VREF*1000-45000)/650)))|(1<<6))):
((((CONFIG_DRAM_VREF*1000-60000)/650)>0X32)?(0X32):(((CONFIG_DRAM_VREF*1000-60000)/650)))))),
.t_pub_mr[7] = ((CONFIG_ZQ_VREF<45)?(0):((((CONFIG_ZQ_VREF*1000-44070)/698)>0X3F)?(0X3F):(((CONFIG_ZQ_VREF*1000-44070)/698)))) ,//jiaxing use for tune zq vref 20160608
.ddr_func = DDR_FUNC, /* ddr func demo 2016.01.26 */
#if (CONFIG_DDR_TYPE == CONFIG_DDR_TYPE_LPDDR3)
//tianhe lpddr3 20161013
.wr_adj_per = {
[0] = 90, //aclcdlr
[1] = 100,
[2] = 120,
[3] = 110,
[4] = 120,
[5] = 105,
},
.rd_adj_per = {
[0] = 100,
[1] = 100,
[2] = 110,
[3] = 110,
[4] = 110,
[5] = 110,},
#else
/* P212 */
.wr_adj_per = {
[0]=100,
[1]=100,
[2]=95,
[3]=95,
[4]=95,
[5]=95,
},
.rd_adj_per = {
[0]=100,
[1]=100,
[2]=88,
[3]=95,
[4]=95,
[5]=100,
},
#endif
};
pll_set_t __pll_setting = {
.cpu_clk = CONFIG_CPU_CLK / 24 * 24,
.spi_ctrl = 0,
.vddee = CONFIG_VDDEE_INIT_VOLTAGE,
.vcck = CONFIG_VCCKA_INIT_VOLTAGE,
.lCustomerID = CONFIG_AML_CUSTOMER_ID,
#ifdef CONFIG_DEBUG_MODE
.debug_mode = CONFIG_DEBUG_MODE,
.ddr_clk_debug = CONFIG_DDR_CLK_DEBUG,
.cpu_clk_debug = CONFIG_CPU_CLK_DEBUG,
#endif
/* pll ssc setting:
.ddr_pll_ssc = 0x00120000, ppm1000 center SS, boot log show: Set ddr ssc: ppm1000
.ddr_pll_ssc = 0x00124000, ppm1000 up SS, boot log show: Set ddr ssc: ppm1000+
.ddr_pll_ssc = 0x00128000, ppm1000 down SS, boot log show: Set ddr ssc: ppm1000-
.ddr_pll_ssc = 0x00140000, ppm2000 center SS, boot log show: Set ddr ssc: ppm2000
.ddr_pll_ssc = 0x00144000, ppm2000 up SS, boot log show: Set ddr ssc: ppm2000+
.ddr_pll_ssc = 0x00148000, ppm2000 down SS, boot log show: Set ddr ssc: ppm2000-
.ddr_pll_ssc = 0x00160000, ppm3000 center SS, boot log show: Set ddr ssc: ppm3000
.ddr_pll_ssc = 0x00164000, ppm3000 up SS, boot log show: Set ddr ssc: ppm3000+
.ddr_pll_ssc = 0x00168000, ppm3000 down SS, boot log show: Set ddr ssc: ppm3000-
*/
.ddr_pll_ssc = 0,
};