| /* | 
 |  * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com> | 
 |  * | 
 |  * Modified to remove all but the IAP-command related code by | 
 |  * Gary Jennejohn <garyj@denx.de> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation; either version 2 of | 
 |  * the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
 |  * MA 02111-1307 USA | 
 |  */ | 
 |  | 
 | #include <common.h> | 
 | #include <asm/arch/hardware.h> | 
 |  | 
 | /* IAP commands use 32 bytes at the top of CPU internal sram, we | 
 |    use 512 bytes below that */ | 
 | #define COPY_BUFFER_LOCATION 0x40003de0 | 
 |  | 
 | #define IAP_LOCATION 0x7ffffff1 | 
 | #define IAP_CMD_PREPARE 50 | 
 | #define IAP_CMD_COPY 51 | 
 | #define IAP_CMD_ERASE 52 | 
 | #define IAP_CMD_CHECK 53 | 
 | #define IAP_CMD_ID 54 | 
 | #define IAP_CMD_VERSION 55 | 
 | #define IAP_CMD_COMPARE 56 | 
 |  | 
 | #define IAP_RET_CMD_SUCCESS 0 | 
 |  | 
 | static unsigned long command[5]; | 
 | static unsigned long result[2]; | 
 |  | 
 | extern void iap_entry(unsigned long * command, unsigned long * result); | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  * | 
 |  */ | 
 | static int get_flash_sector(flash_info_t * info, ulong flash_addr) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for(i = 1; i < (info->sector_count); i++) { | 
 | 		if (flash_addr < (info->start[i])) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	return (i-1); | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  * This function assumes that flash_addr is aligned on 512 bytes boundary | 
 |  * in flash. This function also assumes that prepare have been called | 
 |  * for the sector in question. | 
 |  */ | 
 | int lpc2292_copy_buffer_to_flash(flash_info_t * info, ulong flash_addr) | 
 | { | 
 | 	int first_sector; | 
 | 	int last_sector; | 
 |  | 
 | 	first_sector = get_flash_sector(info, flash_addr); | 
 | 	last_sector = get_flash_sector(info, flash_addr + 512 - 1); | 
 |  | 
 | 	/* prepare sectors for write */ | 
 | 	command[0] = IAP_CMD_PREPARE; | 
 | 	command[1] = first_sector; | 
 | 	command[2] = last_sector; | 
 | 	iap_entry(command, result); | 
 | 	if (result[0] != IAP_RET_CMD_SUCCESS) { | 
 | 		printf("IAP prepare failed\n"); | 
 | 		return ERR_PROG_ERROR; | 
 | 	} | 
 |  | 
 | 	command[0] = IAP_CMD_COPY; | 
 | 	command[1] = flash_addr; | 
 | 	command[2] = COPY_BUFFER_LOCATION; | 
 | 	command[3] = 512; | 
 | 	command[4] = CONFIG_SYS_SYS_CLK_FREQ >> 10; | 
 | 	iap_entry(command, result); | 
 | 	if (result[0] != IAP_RET_CMD_SUCCESS) { | 
 | 		printf("IAP copy failed\n"); | 
 | 		return 1; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 |  | 
 | int lpc2292_flash_erase (flash_info_t * info, int s_first, int s_last) | 
 | { | 
 | 	int flag; | 
 | 	int prot; | 
 | 	int sect; | 
 |  | 
 | 	prot = 0; | 
 | 	for (sect = s_first; sect <= s_last; ++sect) { | 
 | 		if (info->protect[sect]) { | 
 | 			prot++; | 
 | 		} | 
 | 	} | 
 | 	if (prot) | 
 | 		return ERR_PROTECTED; | 
 |  | 
 |  | 
 | 	flag = disable_interrupts(); | 
 |  | 
 | 	printf ("Erasing %d sectors starting at sector %2d.\n" | 
 | 	"This make take some time ... ", | 
 | 	s_last - s_first + 1, s_first); | 
 |  | 
 | 	command[0] = IAP_CMD_PREPARE; | 
 | 	command[1] = s_first; | 
 | 	command[2] = s_last; | 
 | 	iap_entry(command, result); | 
 | 	if (result[0] != IAP_RET_CMD_SUCCESS) { | 
 | 		printf("IAP prepare failed\n"); | 
 | 		return ERR_PROTECTED; | 
 | 	} | 
 |  | 
 | 	command[0] = IAP_CMD_ERASE; | 
 | 	command[1] = s_first; | 
 | 	command[2] = s_last; | 
 | 	command[3] = CONFIG_SYS_SYS_CLK_FREQ >> 10; | 
 | 	iap_entry(command, result); | 
 | 	if (result[0] != IAP_RET_CMD_SUCCESS) { | 
 | 		printf("IAP erase failed\n"); | 
 | 		return ERR_PROTECTED; | 
 | 	} | 
 |  | 
 | 	if (flag) | 
 | 		enable_interrupts(); | 
 |  | 
 | 	return ERR_OK; | 
 | } | 
 |  | 
 | int lpc2292_write_buff (flash_info_t * info, uchar * src, ulong addr, | 
 | 			ulong cnt) | 
 | { | 
 | 	int first_copy_size; | 
 | 	int last_copy_size; | 
 | 	int first_block; | 
 | 	int last_block; | 
 | 	int nbr_mid_blocks; | 
 | 	uchar memmap_value; | 
 | 	ulong i; | 
 | 	uchar* src_org; | 
 | 	uchar* dst_org; | 
 | 	int ret = ERR_OK; | 
 |  | 
 | 	src_org = src; | 
 | 	dst_org = (uchar*)addr; | 
 |  | 
 | 	first_block = addr / 512; | 
 | 	last_block = (addr + cnt) / 512; | 
 | 	nbr_mid_blocks = last_block - first_block - 1; | 
 |  | 
 | 	first_copy_size = 512 - (addr % 512); | 
 | 	last_copy_size = (addr + cnt) % 512; | 
 |  | 
 | 	debug("\ncopy first block: (1) %lX -> %lX 0x200 bytes, " | 
 | 		"(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n", | 
 | 	(ulong)(first_block * 512), | 
 | 	(ulong)COPY_BUFFER_LOCATION, | 
 | 	(ulong)src, | 
 | 	(ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size), | 
 | 	first_copy_size, | 
 | 	(ulong)COPY_BUFFER_LOCATION, | 
 | 	(ulong)(first_block * 512)); | 
 |  | 
 | 	/* copy first block */ | 
 | 	memcpy((void*)COPY_BUFFER_LOCATION, | 
 | 		(void*)(first_block * 512), 512); | 
 | 	memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size), | 
 | 		src, first_copy_size); | 
 | 	lpc2292_copy_buffer_to_flash(info, first_block * 512); | 
 | 	src += first_copy_size; | 
 | 	addr += first_copy_size; | 
 |  | 
 | 	/* copy middle blocks */ | 
 | 	for (i = 0; i < nbr_mid_blocks; i++) { | 
 | 		debug("copy middle block: %lX -> %lX 512 bytes, " | 
 | 		"%lX -> %lX 512 bytes\n", | 
 | 		(ulong)src, | 
 | 		(ulong)COPY_BUFFER_LOCATION, | 
 | 		(ulong)COPY_BUFFER_LOCATION, | 
 | 		(ulong)addr); | 
 |  | 
 | 		memcpy((void*)COPY_BUFFER_LOCATION, src, 512); | 
 | 		lpc2292_copy_buffer_to_flash(info, addr); | 
 | 		src += 512; | 
 | 		addr += 512; | 
 | 	} | 
 |  | 
 |  | 
 | 	if (last_copy_size > 0) { | 
 | 		debug("copy last block: (1) %lX -> %lX 0x200 bytes, " | 
 | 		"(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n", | 
 | 		(ulong)(last_block * 512), | 
 | 		(ulong)COPY_BUFFER_LOCATION, | 
 | 		(ulong)src, | 
 | 		(ulong)(COPY_BUFFER_LOCATION), | 
 | 		last_copy_size, | 
 | 		(ulong)COPY_BUFFER_LOCATION, | 
 | 		(ulong)addr); | 
 |  | 
 | 		/* copy last block */ | 
 | 		memcpy((void*)COPY_BUFFER_LOCATION, | 
 | 			(void*)(last_block * 512), 512); | 
 | 		memcpy((void*)COPY_BUFFER_LOCATION, | 
 | 			src, last_copy_size); | 
 | 		lpc2292_copy_buffer_to_flash(info, addr); | 
 | 	} | 
 |  | 
 | 	/* verify write */ | 
 | 	memmap_value = GET8(MEMMAP); | 
 |  | 
 | 	disable_interrupts(); | 
 |  | 
 | 	PUT8(MEMMAP, 01);		/* we must make sure that initial 64 | 
 | 							   bytes are taken from flash when we | 
 | 							   do the compare */ | 
 |  | 
 | 	for (i = 0; i < cnt; i++) { | 
 | 		if (*dst_org != *src_org){ | 
 | 			printf("Write failed. Byte %lX differs\n", i); | 
 | 			ret = ERR_PROG_ERROR; | 
 | 			break; | 
 | 		} | 
 | 		dst_org++; | 
 | 		src_org++; | 
 | 	} | 
 |  | 
 | 	PUT8(MEMMAP, memmap_value); | 
 | 	enable_interrupts(); | 
 |  | 
 | 	return ret; | 
 | } |