| /* | 
 |  * (C) Copyright 2003 | 
 |  * Steven Scholz, imc Measurement & Control, steven.scholz@imc-berlin.de | 
 |  * | 
 |  * (C) Copyright 2002 | 
 |  * Rich Ireland, Enterasys Networks, rireland@enterasys.com. | 
 |  * | 
 |  * See file CREDITS for list of people who contributed to this | 
 |  * project. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation; either version 2 of | 
 |  * the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
 |  * MA 02111-1307 USA | 
 |  * | 
 |  */ | 
 |  | 
 | #include <common.h>		/* core U-Boot definitions */ | 
 | #include <ACEX1K.h>		/* ACEX device family */ | 
 |  | 
 | #if (CONFIG_FPGA & (CFG_ALTERA | CFG_ACEX1K)) | 
 |  | 
 | /* Define FPGA_DEBUG to get debug printf's */ | 
 | #ifdef	FPGA_DEBUG | 
 | #define PRINTF(fmt,args...)	printf (fmt ,##args) | 
 | #else | 
 | #define PRINTF(fmt,args...) | 
 | #endif | 
 |  | 
 | /* Note: The assumption is that we cannot possibly run fast enough to | 
 |  * overrun the device (the Slave Parallel mode can free run at 50MHz). | 
 |  * If there is a need to operate slower, define CONFIG_FPGA_DELAY in | 
 |  * the board config file to slow things down. | 
 |  */ | 
 | #ifndef CONFIG_FPGA_DELAY | 
 | #define CONFIG_FPGA_DELAY() | 
 | #endif | 
 |  | 
 | #ifndef CFG_FPGA_WAIT | 
 | #define CFG_FPGA_WAIT CFG_HZ/10		/* 100 ms */ | 
 | #endif | 
 |  | 
 | static int ACEX1K_ps_load( Altera_desc *desc, void *buf, size_t bsize ); | 
 | static int ACEX1K_ps_dump( Altera_desc *desc, void *buf, size_t bsize ); | 
 | /* static int ACEX1K_ps_info( Altera_desc *desc ); */ | 
 | static int ACEX1K_ps_reloc( Altera_desc *desc, ulong reloc_offset ); | 
 |  | 
 | /* ------------------------------------------------------------------------- */ | 
 | /* ACEX1K Generic Implementation */ | 
 | int ACEX1K_load (Altera_desc * desc, void *buf, size_t bsize) | 
 | { | 
 | 	int ret_val = FPGA_FAIL; | 
 |  | 
 | 	switch (desc->iface) { | 
 | 	case passive_serial: | 
 | 		PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__); | 
 | 		ret_val = ACEX1K_ps_load (desc, buf, bsize); | 
 | 		break; | 
 |  | 
 | 		/* Add new interface types here */ | 
 |  | 
 | 	default: | 
 | 		printf ("%s: Unsupported interface type, %d\n", | 
 | 				__FUNCTION__, desc->iface); | 
 | 	} | 
 |  | 
 | 	return ret_val; | 
 | } | 
 |  | 
 | int ACEX1K_dump (Altera_desc * desc, void *buf, size_t bsize) | 
 | { | 
 | 	int ret_val = FPGA_FAIL; | 
 |  | 
 | 	switch (desc->iface) { | 
 | 	case passive_serial: | 
 | 		PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__); | 
 | 		ret_val = ACEX1K_ps_dump (desc, buf, bsize); | 
 | 		break; | 
 |  | 
 | 		/* Add new interface types here */ | 
 |  | 
 | 	default: | 
 | 		printf ("%s: Unsupported interface type, %d\n", | 
 | 				__FUNCTION__, desc->iface); | 
 | 	} | 
 |  | 
 | 	return ret_val; | 
 | } | 
 |  | 
 | int ACEX1K_info( Altera_desc *desc ) | 
 | { | 
 | 	return FPGA_SUCCESS; | 
 | } | 
 |  | 
 |  | 
 | int ACEX1K_reloc (Altera_desc * desc, ulong reloc_offset) | 
 | { | 
 | 	int ret_val = FPGA_FAIL;	/* assume a failure */ | 
 |  | 
 | 	if (desc->family != Altera_ACEX1K) { | 
 | 		printf ("%s: Unsupported family type, %d\n", | 
 | 				__FUNCTION__, desc->family); | 
 | 		return FPGA_FAIL; | 
 | 	} else | 
 | 		switch (desc->iface) { | 
 | 		case passive_serial: | 
 | 			ret_val = ACEX1K_ps_reloc (desc, reloc_offset); | 
 | 			break; | 
 |  | 
 | 		/* Add new interface types here */ | 
 |  | 
 | 		default: | 
 | 			printf ("%s: Unsupported interface type, %d\n", | 
 | 					__FUNCTION__, desc->iface); | 
 | 		} | 
 |  | 
 | 	return ret_val; | 
 | } | 
 |  | 
 |  | 
 | /* ------------------------------------------------------------------------- */ | 
 | /* ACEX1K Passive Serial Generic Implementation                                  */ | 
 |  | 
 | static int ACEX1K_ps_load (Altera_desc * desc, void *buf, size_t bsize) | 
 | { | 
 | 	int ret_val = FPGA_FAIL;	/* assume the worst */ | 
 | 	Altera_ACEX1K_Passive_Serial_fns *fn = desc->iface_fns; | 
 | 	int i; | 
 |  | 
 | 	PRINTF ("%s: start with interface functions @ 0x%p\n", | 
 | 			__FUNCTION__, fn); | 
 |  | 
 | 	if (fn) { | 
 | 		size_t bytecount = 0; | 
 | 		unsigned char *data = (unsigned char *) buf; | 
 | 		int cookie = desc->cookie;	/* make a local copy */ | 
 | 		unsigned long ts;		/* timestamp */ | 
 |  | 
 | 		PRINTF ("%s: Function Table:\n" | 
 | 				"ptr:\t0x%p\n" | 
 | 				"struct: 0x%p\n" | 
 | 				"config:\t0x%p\n" | 
 | 				"status:\t0x%p\n" | 
 | 				"clk:\t0x%p\n" | 
 | 				"data:\t0x%p\n" | 
 | 				"done:\t0x%p\n\n", | 
 | 				__FUNCTION__, &fn, fn, fn->config, fn->status, | 
 | 				fn->clk, fn->data, fn->done); | 
 | #ifdef CFG_FPGA_PROG_FEEDBACK | 
 | 		printf ("Loading FPGA Device %d...", cookie); | 
 | #endif | 
 |  | 
 | 		/* | 
 | 		 * Run the pre configuration function if there is one. | 
 | 		 */ | 
 | 		if (*fn->pre) { | 
 | 			(*fn->pre) (cookie); | 
 | 		} | 
 |  | 
 | 		/* Establish the initial state */ | 
 | 		(*fn->config) (TRUE, TRUE, cookie);	/* Assert nCONFIG */ | 
 |  | 
 | 		udelay(2);		/* T_cfg > 2us	*/ | 
 |  | 
 | 		/* nSTATUS should be asserted now */ | 
 | 		(*fn->done) (cookie); | 
 | 		if ( !(*fn->status) (cookie) ) { | 
 | 			puts ("** nSTATUS is not asserted.\n"); | 
 | 			(*fn->abort) (cookie); | 
 | 			return FPGA_FAIL; | 
 | 		} | 
 |  | 
 | 		(*fn->config) (FALSE, TRUE, cookie);	/* Deassert nCONFIG */ | 
 | 		udelay(2);		/* T_cf2st1 < 4us	*/ | 
 |  | 
 | 		/* Wait for nSTATUS to be released (i.e. deasserted) */ | 
 | 		ts = get_timer (0);		/* get current time */ | 
 | 		do { | 
 | 			CONFIG_FPGA_DELAY (); | 
 | 			if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */ | 
 | 				puts ("** Timeout waiting for STATUS to go high.\n"); | 
 | 				(*fn->abort) (cookie); | 
 | 				return FPGA_FAIL; | 
 | 			} | 
 | 			(*fn->done) (cookie); | 
 | 		} while ((*fn->status) (cookie)); | 
 |  | 
 | 		/* Get ready for the burn */ | 
 | 		CONFIG_FPGA_DELAY (); | 
 |  | 
 | 		/* Load the data */ | 
 | 		while (bytecount < bsize) { | 
 | 			unsigned char val=0; | 
 | #ifdef CFG_FPGA_CHECK_CTRLC | 
 | 			if (ctrlc ()) { | 
 | 				(*fn->abort) (cookie); | 
 | 				return FPGA_FAIL; | 
 | 			} | 
 | #endif | 
 | 			/* Altera detects an error if INIT goes low (active) | 
 | 			   while DONE is low (inactive) */ | 
 | #if 0 /* not yet implemented */ | 
 | 			if ((*fn->done) (cookie) == 0 && (*fn->init) (cookie)) { | 
 | 				puts ("** CRC error during FPGA load.\n"); | 
 | 				(*fn->abort) (cookie); | 
 | 				return (FPGA_FAIL); | 
 | 			} | 
 | #endif | 
 | 			val = data [bytecount ++ ]; | 
 | 			i = 8; | 
 | 			do { | 
 | 				/* Deassert the clock */ | 
 | 				(*fn->clk) (FALSE, TRUE, cookie); | 
 | 				CONFIG_FPGA_DELAY (); | 
 | 				/* Write data */ | 
 | 				(*fn->data) ( (val & 0x01), TRUE, cookie); | 
 | 				CONFIG_FPGA_DELAY (); | 
 | 				/* Assert the clock */ | 
 | 				(*fn->clk) (TRUE, TRUE, cookie); | 
 | 				CONFIG_FPGA_DELAY (); | 
 | 				val >>= 1; | 
 | 				i --; | 
 | 			} while (i > 0); | 
 |  | 
 | #ifdef CFG_FPGA_PROG_FEEDBACK | 
 | 			if (bytecount % (bsize / 40) == 0) | 
 | 				putc ('.');		/* let them know we are alive */ | 
 | #endif | 
 | 		} | 
 |  | 
 | 		CONFIG_FPGA_DELAY (); | 
 |  | 
 | #ifdef CFG_FPGA_PROG_FEEDBACK | 
 | 		putc (' ');			/* terminate the dotted line */ | 
 | #endif | 
 |  | 
 | 	/* | 
 | 	 * Checking FPGA's CONF_DONE signal - correctly booted ? | 
 | 	 */ | 
 |  | 
 | 	if ( ! (*fn->done) (cookie) ) { | 
 | 		puts ("** Booting failed! CONF_DONE is still deasserted.\n"); | 
 | 		(*fn->abort) (cookie); | 
 | 		return (FPGA_FAIL); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * "DCLK must be clocked an additional 10 times fpr ACEX 1K..." | 
 | 	 */ | 
 |  | 
 | 	for (i = 0; i < 12; i++) { | 
 | 		CONFIG_FPGA_DELAY (); | 
 | 		(*fn->clk) (TRUE, TRUE, cookie);	/* Assert the clock pin */ | 
 | 		CONFIG_FPGA_DELAY (); | 
 | 		(*fn->clk) (FALSE, TRUE, cookie);	/* Deassert the clock pin */ | 
 | 	} | 
 |  | 
 | 	ret_val = FPGA_SUCCESS; | 
 |  | 
 | #ifdef CFG_FPGA_PROG_FEEDBACK | 
 | 		if (ret_val == FPGA_SUCCESS) { | 
 | 			puts ("Done.\n"); | 
 | 		} | 
 | 		else { | 
 | 			puts ("Fail.\n"); | 
 | 		} | 
 | #endif | 
 | 	(*fn->post) (cookie); | 
 |  | 
 | 	} else { | 
 | 		printf ("%s: NULL Interface function table!\n", __FUNCTION__); | 
 | 	} | 
 |  | 
 | 	return ret_val; | 
 | } | 
 |  | 
 | static int ACEX1K_ps_dump (Altera_desc * desc, void *buf, size_t bsize) | 
 | { | 
 | 	/* Readback is only available through the Slave Parallel and         */ | 
 | 	/* boundary-scan interfaces.                                         */ | 
 | 	printf ("%s: Passive Serial Dumping is unavailable\n", | 
 | 			__FUNCTION__); | 
 | 	return FPGA_FAIL; | 
 | } | 
 |  | 
 | static int ACEX1K_ps_reloc (Altera_desc * desc, ulong reloc_offset) | 
 | { | 
 | 	int ret_val = FPGA_FAIL;	/* assume the worst */ | 
 | 	Altera_ACEX1K_Passive_Serial_fns *fn_r, *fn = | 
 | 			(Altera_ACEX1K_Passive_Serial_fns *) (desc->iface_fns); | 
 |  | 
 | 	if (fn) { | 
 | 		ulong addr; | 
 |  | 
 | 		/* Get the relocated table address */ | 
 | 		addr = (ulong) fn + reloc_offset; | 
 | 		fn_r = (Altera_ACEX1K_Passive_Serial_fns *) addr; | 
 |  | 
 | 		if (!fn_r->relocated) { | 
 |  | 
 | 			if (memcmp (fn_r, fn, | 
 | 						sizeof (Altera_ACEX1K_Passive_Serial_fns)) | 
 | 				== 0) { | 
 | 				/* good copy of the table, fix the descriptor pointer */ | 
 | 				desc->iface_fns = fn_r; | 
 | 			} else { | 
 | 				PRINTF ("%s: Invalid function table at 0x%p\n", | 
 | 						__FUNCTION__, fn_r); | 
 | 				return FPGA_FAIL; | 
 | 			} | 
 |  | 
 | 			PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__, | 
 | 					desc); | 
 |  | 
 | 			addr = (ulong) (fn->pre) + reloc_offset; | 
 | 			fn_r->pre = (Altera_pre_fn) addr; | 
 |  | 
 | 			addr = (ulong) (fn->config) + reloc_offset; | 
 | 			fn_r->config = (Altera_config_fn) addr; | 
 |  | 
 | 			addr = (ulong) (fn->status) + reloc_offset; | 
 | 			fn_r->status = (Altera_status_fn) addr; | 
 |  | 
 | 			addr = (ulong) (fn->done) + reloc_offset; | 
 | 			fn_r->done = (Altera_done_fn) addr; | 
 |  | 
 | 			addr = (ulong) (fn->clk) + reloc_offset; | 
 | 			fn_r->clk = (Altera_clk_fn) addr; | 
 |  | 
 | 			addr = (ulong) (fn->data) + reloc_offset; | 
 | 			fn_r->data = (Altera_data_fn) addr; | 
 |  | 
 | 			addr = (ulong) (fn->abort) + reloc_offset; | 
 | 			fn_r->abort = (Altera_abort_fn) addr; | 
 |  | 
 | 			addr = (ulong) (fn->post) + reloc_offset; | 
 | 			fn_r->post = (Altera_post_fn) addr; | 
 |  | 
 | 			fn_r->relocated = TRUE; | 
 |  | 
 | 		} else { | 
 | 			/* this table has already been moved */ | 
 | 			/* XXX - should check to see if the descriptor is correct */ | 
 | 			desc->iface_fns = fn_r; | 
 | 		} | 
 |  | 
 | 		ret_val = FPGA_SUCCESS; | 
 | 	} else { | 
 | 		printf ("%s: NULL Interface function table!\n", __FUNCTION__); | 
 | 	} | 
 |  | 
 | 	return ret_val; | 
 |  | 
 | } | 
 |  | 
 | #endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_ACEX1K)) */ |