|  | /* | 
|  | * (C) Copyright 2003 | 
|  | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | 
|  | * | 
|  | * See file CREDITS for list of people who contributed to this | 
|  | * project. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation; either version 2 of | 
|  | * the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
|  | * MA 02111-1307 USA | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Boot support | 
|  | */ | 
|  | #include <common.h> | 
|  | #include <command.h> | 
|  | #include <linux/compiler.h> | 
|  |  | 
|  | DECLARE_GLOBAL_DATA_PTR; | 
|  |  | 
|  | __maybe_unused | 
|  | static void print_num(const char *name, ulong value) | 
|  | { | 
|  | printf("%-12s= 0x%08lX\n", name, value); | 
|  | } | 
|  |  | 
|  | __maybe_unused | 
|  | static void print_eth(int idx) | 
|  | { | 
|  | char name[10], *val; | 
|  | if (idx) | 
|  | sprintf(name, "eth%iaddr", idx); | 
|  | else | 
|  | strcpy(name, "ethaddr"); | 
|  | val = getenv(name); | 
|  | if (!val) | 
|  | val = "(not set)"; | 
|  | printf("%-12s= %s\n", name, val); | 
|  | } | 
|  |  | 
|  | __maybe_unused | 
|  | static void print_lnum(const char *name, u64 value) | 
|  | { | 
|  | printf("%-12s= 0x%.8llX\n", name, value); | 
|  | } | 
|  |  | 
|  | __maybe_unused | 
|  | static void print_mhz(const char *name, unsigned long hz) | 
|  | { | 
|  | char buf[32]; | 
|  |  | 
|  | printf("%-12s= %6s MHz\n", name, strmhz(buf, hz)); | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_PPC) | 
|  |  | 
|  | int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | 
|  | { | 
|  | bd_t *bd = gd->bd; | 
|  |  | 
|  | #ifdef DEBUG | 
|  | print_num("bd address",		(ulong)bd); | 
|  | #endif | 
|  | print_num("memstart",		bd->bi_memstart); | 
|  | print_lnum("memsize",		bd->bi_memsize); | 
|  | print_num("flashstart",		bd->bi_flashstart); | 
|  | print_num("flashsize",		bd->bi_flashsize); | 
|  | print_num("flashoffset",	bd->bi_flashoffset); | 
|  | print_num("sramstart",		bd->bi_sramstart); | 
|  | print_num("sramsize",		bd->bi_sramsize); | 
|  | #if	defined(CONFIG_5xx)  || defined(CONFIG_8xx) || \ | 
|  | defined(CONFIG_8260) || defined(CONFIG_E500) | 
|  | print_num("immr_base",		bd->bi_immr_base); | 
|  | #endif | 
|  | print_num("bootflags",		bd->bi_bootflags); | 
|  | #if	defined(CONFIG_405CR) || defined(CONFIG_405EP) || \ | 
|  | defined(CONFIG_405GP) || \ | 
|  | defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ | 
|  | defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \ | 
|  | defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ | 
|  | defined(CONFIG_XILINX_405) | 
|  | print_mhz("procfreq",		bd->bi_procfreq); | 
|  | print_mhz("plb_busfreq",	bd->bi_plb_busfreq); | 
|  | #if	defined(CONFIG_405EP) || defined(CONFIG_405GP) || \ | 
|  | defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ | 
|  | defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \ | 
|  | defined(CONFIG_440SPE) || defined(CONFIG_XILINX_405) | 
|  | print_mhz("pci_busfreq",	bd->bi_pci_busfreq); | 
|  | #endif | 
|  | #else	/* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */ | 
|  | #if defined(CONFIG_CPM2) | 
|  | print_mhz("vco",		bd->bi_vco); | 
|  | print_mhz("sccfreq",		bd->bi_sccfreq); | 
|  | print_mhz("brgfreq",		bd->bi_brgfreq); | 
|  | #endif | 
|  | print_mhz("intfreq",		bd->bi_intfreq); | 
|  | #if defined(CONFIG_CPM2) | 
|  | print_mhz("cpmfreq",		bd->bi_cpmfreq); | 
|  | #endif | 
|  | print_mhz("busfreq",		bd->bi_busfreq); | 
|  | #endif /* CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */ | 
|  | #if defined(CONFIG_MPC8220) | 
|  | print_mhz("inpfreq",		bd->bi_inpfreq); | 
|  | print_mhz("flbfreq",		bd->bi_flbfreq); | 
|  | print_mhz("pcifreq",		bd->bi_pcifreq); | 
|  | print_mhz("vcofreq",		bd->bi_vcofreq); | 
|  | print_mhz("pevfreq",		bd->bi_pevfreq); | 
|  | #endif | 
|  |  | 
|  | print_eth(0); | 
|  | #if defined(CONFIG_HAS_ETH1) | 
|  | print_eth(1); | 
|  | #endif | 
|  | #if defined(CONFIG_HAS_ETH2) | 
|  | print_eth(2); | 
|  | #endif | 
|  | #if defined(CONFIG_HAS_ETH3) | 
|  | print_eth(3); | 
|  | #endif | 
|  | #if defined(CONFIG_HAS_ETH4) | 
|  | print_eth(4); | 
|  | #endif | 
|  | #if defined(CONFIG_HAS_ETH5) | 
|  | print_eth(5); | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_HERMES | 
|  | print_mhz("ethspeed",		bd->bi_ethspeed); | 
|  | #endif | 
|  | printf("IP addr     = %pI4\n", &bd->bi_ip_addr); | 
|  | printf("baudrate    = %6ld bps\n", bd->bi_baudrate); | 
|  | print_num("relocaddr", gd->relocaddr); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #elif defined(CONFIG_NIOS2) | 
|  |  | 
|  | int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | 
|  | { | 
|  | bd_t *bd = gd->bd; | 
|  |  | 
|  | print_num("mem start",		(ulong)bd->bi_memstart); | 
|  | print_lnum("mem size",		(u64)bd->bi_memsize); | 
|  | print_num("flash start",	(ulong)bd->bi_flashstart); | 
|  | print_num("flash size",		(ulong)bd->bi_flashsize); | 
|  | print_num("flash offset",	(ulong)bd->bi_flashoffset); | 
|  |  | 
|  | #if defined(CONFIG_SYS_SRAM_BASE) | 
|  | print_num ("sram start",	(ulong)bd->bi_sramstart); | 
|  | print_num ("sram size",		(ulong)bd->bi_sramsize); | 
|  | #endif | 
|  |  | 
|  | #if defined(CONFIG_CMD_NET) | 
|  | print_eth(0); | 
|  | printf("ip_addr     = %pI4\n", &bd->bi_ip_addr); | 
|  | #endif | 
|  |  | 
|  | printf("baudrate    = %ld bps\n", bd->bi_baudrate); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #elif defined(CONFIG_MICROBLAZE) | 
|  |  | 
|  | int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | 
|  | { | 
|  | bd_t *bd = gd->bd; | 
|  | print_num("mem start      ",	(ulong)bd->bi_memstart); | 
|  | print_lnum("mem size       ",	(u64)bd->bi_memsize); | 
|  | print_num("flash start    ",	(ulong)bd->bi_flashstart); | 
|  | print_num("flash size     ",	(ulong)bd->bi_flashsize); | 
|  | print_num("flash offset   ",	(ulong)bd->bi_flashoffset); | 
|  | #if defined(CONFIG_SYS_SRAM_BASE) | 
|  | print_num("sram start     ",	(ulong)bd->bi_sramstart); | 
|  | print_num("sram size      ",	(ulong)bd->bi_sramsize); | 
|  | #endif | 
|  | #if defined(CONFIG_CMD_NET) | 
|  | print_eth(0); | 
|  | printf("ip_addr     = %pI4\n", &bd->bi_ip_addr); | 
|  | #endif | 
|  | printf("baudrate    = %ld bps\n", (ulong)bd->bi_baudrate); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #elif defined(CONFIG_SPARC) | 
|  |  | 
|  | int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) | 
|  | { | 
|  | bd_t *bd = gd->bd; | 
|  |  | 
|  | #ifdef DEBUG | 
|  | print_num("bd address             ", (ulong) bd); | 
|  | #endif | 
|  | print_num("memstart               ", bd->bi_memstart); | 
|  | print_lnum("memsize                ", bd->bi_memsize); | 
|  | print_num("flashstart             ", bd->bi_flashstart); | 
|  | print_num("CONFIG_SYS_MONITOR_BASE       ", CONFIG_SYS_MONITOR_BASE); | 
|  | print_num("CONFIG_ENV_ADDR           ", CONFIG_ENV_ADDR); | 
|  | printf("CONFIG_SYS_RELOC_MONITOR_BASE = 0x%lx (%d)\n", CONFIG_SYS_RELOC_MONITOR_BASE, | 
|  | CONFIG_SYS_MONITOR_LEN); | 
|  | printf("CONFIG_SYS_MALLOC_BASE        = 0x%lx (%d)\n", CONFIG_SYS_MALLOC_BASE, | 
|  | CONFIG_SYS_MALLOC_LEN); | 
|  | printf("CONFIG_SYS_INIT_SP_OFFSET     = 0x%lx (%d)\n", CONFIG_SYS_INIT_SP_OFFSET, | 
|  | CONFIG_SYS_STACK_SIZE); | 
|  | printf("CONFIG_SYS_PROM_OFFSET        = 0x%lx (%d)\n", CONFIG_SYS_PROM_OFFSET, | 
|  | CONFIG_SYS_PROM_SIZE); | 
|  | printf("CONFIG_SYS_GBL_DATA_OFFSET    = 0x%lx (%d)\n", CONFIG_SYS_GBL_DATA_OFFSET, | 
|  | GENERATED_GBL_DATA_SIZE); | 
|  |  | 
|  | #if defined(CONFIG_CMD_NET) | 
|  | print_eth(0); | 
|  | printf("ip_addr     = %pI4\n", &bd->bi_ip_addr); | 
|  | #endif | 
|  | printf("baudrate               = %6ld bps\n", bd->bi_baudrate); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #elif defined(CONFIG_M68K) | 
|  |  | 
|  | int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | 
|  | { | 
|  | bd_t *bd = gd->bd; | 
|  |  | 
|  | print_num("memstart",		(ulong)bd->bi_memstart); | 
|  | print_lnum("memsize",		(u64)bd->bi_memsize); | 
|  | print_num("flashstart",		(ulong)bd->bi_flashstart); | 
|  | print_num("flashsize",		(ulong)bd->bi_flashsize); | 
|  | print_num("flashoffset",	(ulong)bd->bi_flashoffset); | 
|  | #if defined(CONFIG_SYS_INIT_RAM_ADDR) | 
|  | print_num("sramstart",		(ulong)bd->bi_sramstart); | 
|  | print_num("sramsize",		(ulong)bd->bi_sramsize); | 
|  | #endif | 
|  | #if defined(CONFIG_SYS_MBAR) | 
|  | print_num("mbar",		bd->bi_mbar_base); | 
|  | #endif | 
|  | print_mhz("cpufreq",		bd->bi_intfreq); | 
|  | print_mhz("busfreq",		bd->bi_busfreq); | 
|  | #ifdef CONFIG_PCI | 
|  | print_mhz("pcifreq",		bd->bi_pcifreq); | 
|  | #endif | 
|  | #ifdef CONFIG_EXTRA_CLOCK | 
|  | print_mhz("flbfreq",		bd->bi_flbfreq); | 
|  | print_mhz("inpfreq",		bd->bi_inpfreq); | 
|  | print_mhz("vcofreq",		bd->bi_vcofreq); | 
|  | #endif | 
|  | #if defined(CONFIG_CMD_NET) | 
|  | print_eth(0); | 
|  | #if defined(CONFIG_HAS_ETH1) | 
|  | print_eth(1); | 
|  | #endif | 
|  | #if defined(CONFIG_HAS_ETH2) | 
|  | print_eth(2); | 
|  | #endif | 
|  | #if defined(CONFIG_HAS_ETH3) | 
|  | print_eth(3); | 
|  | #endif | 
|  |  | 
|  | printf("ip_addr     = %pI4\n", &bd->bi_ip_addr); | 
|  | #endif | 
|  | printf("baudrate    = %ld bps\n", bd->bi_baudrate); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #elif defined(CONFIG_BLACKFIN) | 
|  |  | 
|  | int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | 
|  | { | 
|  | bd_t *bd = gd->bd; | 
|  |  | 
|  | printf("U-Boot      = %s\n", bd->bi_r_version); | 
|  | printf("CPU         = %s\n", bd->bi_cpu); | 
|  | printf("Board       = %s\n", bd->bi_board_name); | 
|  | print_mhz("VCO",	bd->bi_vco); | 
|  | print_mhz("CCLK",	bd->bi_cclk); | 
|  | print_mhz("SCLK",	bd->bi_sclk); | 
|  |  | 
|  | print_num("boot_params",	(ulong)bd->bi_boot_params); | 
|  | print_num("memstart",		(ulong)bd->bi_memstart); | 
|  | print_lnum("memsize",		(u64)bd->bi_memsize); | 
|  | print_num("flashstart",		(ulong)bd->bi_flashstart); | 
|  | print_num("flashsize",		(ulong)bd->bi_flashsize); | 
|  | print_num("flashoffset",	(ulong)bd->bi_flashoffset); | 
|  |  | 
|  | print_eth(0); | 
|  | printf("ip_addr     = %pI4\n", &bd->bi_ip_addr); | 
|  | printf("baudrate    = %d bps\n", bd->bi_baudrate); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #elif defined(CONFIG_MIPS) | 
|  |  | 
|  | int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | 
|  | { | 
|  | bd_t *bd = gd->bd; | 
|  |  | 
|  | print_num("boot_params",	(ulong)bd->bi_boot_params); | 
|  | print_num("memstart",		(ulong)bd->bi_memstart); | 
|  | print_lnum("memsize",		(u64)bd->bi_memsize); | 
|  | print_num("flashstart",		(ulong)bd->bi_flashstart); | 
|  | print_num("flashsize",		(ulong)bd->bi_flashsize); | 
|  | print_num("flashoffset",	(ulong)bd->bi_flashoffset); | 
|  |  | 
|  | print_eth(0); | 
|  | printf("ip_addr     = %pI4\n", &bd->bi_ip_addr); | 
|  | printf("baudrate    = %d bps\n", bd->bi_baudrate); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #elif defined(CONFIG_AVR32) | 
|  |  | 
|  | int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | 
|  | { | 
|  | bd_t *bd = gd->bd; | 
|  |  | 
|  | print_num("boot_params",	(ulong)bd->bi_boot_params); | 
|  | print_num("memstart",		(ulong)bd->bi_memstart); | 
|  | print_lnum("memsize",		(u64)bd->bi_memsize); | 
|  | print_num("flashstart",		(ulong)bd->bi_flashstart); | 
|  | print_num("flashsize",		(ulong)bd->bi_flashsize); | 
|  | print_num("flashoffset",	(ulong)bd->bi_flashoffset); | 
|  |  | 
|  | print_eth(0); | 
|  | printf("ip_addr     = %pI4\n", &bd->bi_ip_addr); | 
|  | printf("baudrate    = %lu bps\n", bd->bi_baudrate); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #elif defined(CONFIG_ARM) | 
|  |  | 
|  | int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | 
|  | { | 
|  | int i; | 
|  | bd_t *bd = gd->bd; | 
|  |  | 
|  | print_num("arch_number",	bd->bi_arch_number); | 
|  | print_num("boot_params",	(ulong)bd->bi_boot_params); | 
|  |  | 
|  | for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) { | 
|  | print_num("DRAM bank",	i); | 
|  | print_num("-> start",	bd->bi_dram[i].start); | 
|  | print_num("-> size",	bd->bi_dram[i].size); | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_CMD_NET) | 
|  | print_eth(0); | 
|  | printf("ip_addr     = %pI4\n", &bd->bi_ip_addr); | 
|  | #endif | 
|  | printf("baudrate    = %d bps\n", bd->bi_baudrate); | 
|  | #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) | 
|  | print_num("TLB addr", gd->tlb_addr); | 
|  | #endif | 
|  | print_num("relocaddr", gd->relocaddr); | 
|  | print_num("reloc off", gd->reloc_off); | 
|  | print_num("irq_sp", gd->irq_sp);	/* irq stack pointer */ | 
|  | print_num("sp start ", gd->start_addr_sp); | 
|  | print_num("FB base  ", gd->fb_base); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #elif defined(CONFIG_SH) | 
|  |  | 
|  | int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | 
|  | { | 
|  | bd_t *bd = gd->bd; | 
|  | print_num("mem start      ",	(ulong)bd->bi_memstart); | 
|  | print_lnum("mem size       ",	(u64)bd->bi_memsize); | 
|  | print_num("flash start    ",	(ulong)bd->bi_flashstart); | 
|  | print_num("flash size     ",	(ulong)bd->bi_flashsize); | 
|  | print_num("flash offset   ",	(ulong)bd->bi_flashoffset); | 
|  |  | 
|  | #if defined(CONFIG_CMD_NET) | 
|  | print_eth(0); | 
|  | printf("ip_addr     = %pI4\n", &bd->bi_ip_addr); | 
|  | #endif | 
|  | printf("baudrate    = %ld bps\n", (ulong)bd->bi_baudrate); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #elif defined(CONFIG_X86) | 
|  |  | 
|  | int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | 
|  | { | 
|  | int i; | 
|  | bd_t *bd = gd->bd; | 
|  |  | 
|  | print_num("boot_params",	(ulong)bd->bi_boot_params); | 
|  | print_num("bi_memstart",	bd->bi_memstart); | 
|  | print_num("bi_memsize",		bd->bi_memsize); | 
|  | print_num("bi_flashstart",	bd->bi_flashstart); | 
|  | print_num("bi_flashsize",	bd->bi_flashsize); | 
|  | print_num("bi_flashoffset",	bd->bi_flashoffset); | 
|  | print_num("bi_sramstart",	bd->bi_sramstart); | 
|  | print_num("bi_sramsize",	bd->bi_sramsize); | 
|  | print_num("bi_bootflags",	bd->bi_bootflags); | 
|  | print_mhz("cpufreq",		bd->bi_intfreq); | 
|  | print_mhz("busfreq",		bd->bi_busfreq); | 
|  |  | 
|  | for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) { | 
|  | print_num("DRAM bank",	i); | 
|  | print_num("-> start",	bd->bi_dram[i].start); | 
|  | print_num("-> size",	bd->bi_dram[i].size); | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_CMD_NET) | 
|  | print_eth(0); | 
|  | printf("ip_addr     = %pI4\n", &bd->bi_ip_addr); | 
|  | print_mhz("ethspeed",	    bd->bi_ethspeed); | 
|  | #endif | 
|  | printf("baudrate    = %d bps\n", bd->bi_baudrate); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #elif defined(CONFIG_SANDBOX) | 
|  |  | 
|  | int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | 
|  | { | 
|  | int i; | 
|  | bd_t *bd = gd->bd; | 
|  |  | 
|  | print_num("boot_params", (ulong)bd->bi_boot_params); | 
|  |  | 
|  | for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) { | 
|  | print_num("DRAM bank", i); | 
|  | print_num("-> start", bd->bi_dram[i].start); | 
|  | print_num("-> size", bd->bi_dram[i].size); | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_CMD_NET) | 
|  | print_eth(0); | 
|  | printf("ip_addr     = %pI4\n", &bd->bi_ip_addr); | 
|  | #endif | 
|  | print_num("FB base  ", gd->fb_base); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #elif defined(CONFIG_NDS32) | 
|  |  | 
|  | int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | 
|  | { | 
|  | int i; | 
|  | bd_t *bd = gd->bd; | 
|  |  | 
|  | print_num("arch_number",	bd->bi_arch_number); | 
|  | print_num("boot_params",	(ulong)bd->bi_boot_params); | 
|  |  | 
|  | for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) { | 
|  | print_num("DRAM bank",	i); | 
|  | print_num("-> start",	bd->bi_dram[i].start); | 
|  | print_num("-> size",	bd->bi_dram[i].size); | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_CMD_NET) | 
|  | print_eth(0); | 
|  | printf("ip_addr     = %pI4\n", &bd->bi_ip_addr); | 
|  | #endif | 
|  | printf("baudrate    = %d bps\n", bd->bi_baudrate); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #else | 
|  | #error "a case for this architecture does not exist!" | 
|  | #endif | 
|  |  | 
|  | /* -------------------------------------------------------------------- */ | 
|  |  | 
|  | U_BOOT_CMD( | 
|  | bdinfo,	1,	1,	do_bdinfo, | 
|  | "print Board Info structure", | 
|  | "" | 
|  | ); |