|  | /* | 
|  | * (C) Copyright 2008 Semihalf | 
|  | * | 
|  | * (C) Copyright 2000-2006 | 
|  | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | 
|  | * | 
|  | * See file CREDITS for list of people who contributed to this | 
|  | * project. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation; either version 2 of | 
|  | * the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
|  | * MA 02111-1307 USA | 
|  | */ | 
|  |  | 
|  | #ifndef USE_HOSTCC | 
|  | #include <common.h> | 
|  | #include <watchdog.h> | 
|  |  | 
|  | #ifdef CONFIG_SHOW_BOOT_PROGRESS | 
|  | #include <status_led.h> | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_HAS_DATAFLASH | 
|  | #include <dataflash.h> | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_LOGBUFFER | 
|  | #include <logbuff.h> | 
|  | #endif | 
|  |  | 
|  | #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) | 
|  | #include <rtc.h> | 
|  | #endif | 
|  |  | 
|  | #include <image.h> | 
|  |  | 
|  | #if defined(CONFIG_FIT) || defined (CONFIG_OF_LIBFDT) | 
|  | #include <fdt.h> | 
|  | #include <libfdt.h> | 
|  | #include <fdt_support.h> | 
|  | #endif | 
|  |  | 
|  | #if defined(CONFIG_FIT) | 
|  | #include <u-boot/md5.h> | 
|  | #include <sha1.h> | 
|  |  | 
|  | static int fit_check_ramdisk (const void *fit, int os_noffset, | 
|  | uint8_t arch, int verify); | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_CMD_BDI | 
|  | extern int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); | 
|  | #endif | 
|  |  | 
|  | DECLARE_GLOBAL_DATA_PTR; | 
|  |  | 
|  | static const image_header_t* image_get_ramdisk (ulong rd_addr, uint8_t arch, | 
|  | int verify); | 
|  | #else | 
|  | #include "mkimage.h" | 
|  | #include <u-boot/md5.h> | 
|  | #include <time.h> | 
|  | #include <image.h> | 
|  | #endif /* !USE_HOSTCC*/ | 
|  |  | 
|  | static const table_entry_t uimage_arch[] = { | 
|  | {	IH_ARCH_INVALID,	NULL,		"Invalid ARCH",	}, | 
|  | {	IH_ARCH_ALPHA,		"alpha",	"Alpha",	}, | 
|  | {	IH_ARCH_ARM,		"arm",		"ARM",		}, | 
|  | {	IH_ARCH_I386,		"x86",		"Intel x86",	}, | 
|  | {	IH_ARCH_IA64,		"ia64",		"IA64",		}, | 
|  | {	IH_ARCH_M68K,		"m68k",		"M68K",		}, | 
|  | {	IH_ARCH_MICROBLAZE,	"microblaze",	"MicroBlaze",	}, | 
|  | {	IH_ARCH_MIPS,		"mips",		"MIPS",		}, | 
|  | {	IH_ARCH_MIPS64,		"mips64",	"MIPS 64 Bit",	}, | 
|  | {	IH_ARCH_NIOS2,		"nios2",	"NIOS II",	}, | 
|  | {	IH_ARCH_PPC,		"powerpc",	"PowerPC",	}, | 
|  | {	IH_ARCH_PPC,		"ppc",		"PowerPC",	}, | 
|  | {	IH_ARCH_S390,		"s390",		"IBM S390",	}, | 
|  | {	IH_ARCH_SH,		"sh",		"SuperH",	}, | 
|  | {	IH_ARCH_SPARC,		"sparc",	"SPARC",	}, | 
|  | {	IH_ARCH_SPARC64,	"sparc64",	"SPARC 64 Bit",	}, | 
|  | {	IH_ARCH_BLACKFIN,	"blackfin",	"Blackfin",	}, | 
|  | {	IH_ARCH_AVR32,		"avr32",	"AVR32",	}, | 
|  | {	-1,			"",		"",		}, | 
|  | }; | 
|  |  | 
|  | static const table_entry_t uimage_os[] = { | 
|  | {	IH_OS_INVALID,	NULL,		"Invalid OS",		}, | 
|  | {	IH_OS_LINUX,	"linux",	"Linux",		}, | 
|  | #if defined(CONFIG_LYNXKDI) || defined(USE_HOSTCC) | 
|  | {	IH_OS_LYNXOS,	"lynxos",	"LynxOS",		}, | 
|  | #endif | 
|  | {	IH_OS_NETBSD,	"netbsd",	"NetBSD",		}, | 
|  | {	IH_OS_OSE,	"ose",		"Enea OSE",		}, | 
|  | {	IH_OS_RTEMS,	"rtems",	"RTEMS",		}, | 
|  | {	IH_OS_U_BOOT,	"u-boot",	"U-Boot",		}, | 
|  | #if defined(CONFIG_CMD_ELF) || defined(USE_HOSTCC) | 
|  | {	IH_OS_QNX,	"qnx",		"QNX",			}, | 
|  | {	IH_OS_VXWORKS,	"vxworks",	"VxWorks",		}, | 
|  | #endif | 
|  | #if defined(CONFIG_INTEGRITY) || defined(USE_HOSTCC) | 
|  | {	IH_OS_INTEGRITY,"integrity",	"INTEGRITY",		}, | 
|  | #endif | 
|  | #ifdef USE_HOSTCC | 
|  | {	IH_OS_4_4BSD,	"4_4bsd",	"4_4BSD",		}, | 
|  | {	IH_OS_DELL,	"dell",		"Dell",			}, | 
|  | {	IH_OS_ESIX,	"esix",		"Esix",			}, | 
|  | {	IH_OS_FREEBSD,	"freebsd",	"FreeBSD",		}, | 
|  | {	IH_OS_IRIX,	"irix",		"Irix",			}, | 
|  | {	IH_OS_NCR,	"ncr",		"NCR",			}, | 
|  | {	IH_OS_OPENBSD,	"openbsd",	"OpenBSD",		}, | 
|  | {	IH_OS_PSOS,	"psos",		"pSOS",			}, | 
|  | {	IH_OS_SCO,	"sco",		"SCO",			}, | 
|  | {	IH_OS_SOLARIS,	"solaris",	"Solaris",		}, | 
|  | {	IH_OS_SVR4,	"svr4",		"SVR4",			}, | 
|  | #endif | 
|  | {	-1,		"",		"",			}, | 
|  | }; | 
|  |  | 
|  | static const table_entry_t uimage_type[] = { | 
|  | {	IH_TYPE_INVALID,    NULL,	  "Invalid Image",	}, | 
|  | {	IH_TYPE_FILESYSTEM, "filesystem", "Filesystem Image",	}, | 
|  | {	IH_TYPE_FIRMWARE,   "firmware",	  "Firmware",		}, | 
|  | {	IH_TYPE_KERNEL,	    "kernel",	  "Kernel Image",	}, | 
|  | {	IH_TYPE_MULTI,	    "multi",	  "Multi-File Image",	}, | 
|  | {	IH_TYPE_RAMDISK,    "ramdisk",	  "RAMDisk Image",	}, | 
|  | {	IH_TYPE_SCRIPT,     "script",	  "Script",		}, | 
|  | {	IH_TYPE_STANDALONE, "standalone", "Standalone Program", }, | 
|  | {	IH_TYPE_FLATDT,     "flat_dt",    "Flat Device Tree",	}, | 
|  | {	IH_TYPE_KWBIMAGE,   "kwbimage",   "Kirkwood Boot Image",}, | 
|  | {	IH_TYPE_IMXIMAGE,   "imximage",   "Freescale i.MX Boot Image",}, | 
|  | {	-1,		    "",		  "",			}, | 
|  | }; | 
|  |  | 
|  | static const table_entry_t uimage_comp[] = { | 
|  | {	IH_COMP_NONE,	"none",		"uncompressed",		}, | 
|  | {	IH_COMP_BZIP2,	"bzip2",	"bzip2 compressed",	}, | 
|  | {	IH_COMP_GZIP,	"gzip",		"gzip compressed",	}, | 
|  | {	IH_COMP_LZMA,	"lzma",		"lzma compressed",	}, | 
|  | {	IH_COMP_LZO,	"lzo",		"lzo compressed",	}, | 
|  | {	-1,		"",		"",			}, | 
|  | }; | 
|  |  | 
|  | uint32_t crc32 (uint32_t, const unsigned char *, uint); | 
|  | uint32_t crc32_wd (uint32_t, const unsigned char *, uint, uint); | 
|  | #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC) | 
|  | static void genimg_print_time (time_t timestamp); | 
|  | #endif | 
|  |  | 
|  | /*****************************************************************************/ | 
|  | /* Legacy format routines */ | 
|  | /*****************************************************************************/ | 
|  | int image_check_hcrc (const image_header_t *hdr) | 
|  | { | 
|  | ulong hcrc; | 
|  | ulong len = image_get_header_size (); | 
|  | image_header_t header; | 
|  |  | 
|  | /* Copy header so we can blank CRC field for re-calculation */ | 
|  | memmove (&header, (char *)hdr, image_get_header_size ()); | 
|  | image_set_hcrc (&header, 0); | 
|  |  | 
|  | hcrc = crc32 (0, (unsigned char *)&header, len); | 
|  |  | 
|  | return (hcrc == image_get_hcrc (hdr)); | 
|  | } | 
|  |  | 
|  | int image_check_dcrc (const image_header_t *hdr) | 
|  | { | 
|  | ulong data = image_get_data (hdr); | 
|  | ulong len = image_get_data_size (hdr); | 
|  | ulong dcrc = crc32_wd (0, (unsigned char *)data, len, CHUNKSZ_CRC32); | 
|  |  | 
|  | return (dcrc == image_get_dcrc (hdr)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * image_multi_count - get component (sub-image) count | 
|  | * @hdr: pointer to the header of the multi component image | 
|  | * | 
|  | * image_multi_count() returns number of components in a multi | 
|  | * component image. | 
|  | * | 
|  | * Note: no checking of the image type is done, caller must pass | 
|  | * a valid multi component image. | 
|  | * | 
|  | * returns: | 
|  | *     number of components | 
|  | */ | 
|  | ulong image_multi_count (const image_header_t *hdr) | 
|  | { | 
|  | ulong i, count = 0; | 
|  | uint32_t *size; | 
|  |  | 
|  | /* get start of the image payload, which in case of multi | 
|  | * component images that points to a table of component sizes */ | 
|  | size = (uint32_t *)image_get_data (hdr); | 
|  |  | 
|  | /* count non empty slots */ | 
|  | for (i = 0; size[i]; ++i) | 
|  | count++; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * image_multi_getimg - get component data address and size | 
|  | * @hdr: pointer to the header of the multi component image | 
|  | * @idx: index of the requested component | 
|  | * @data: pointer to a ulong variable, will hold component data address | 
|  | * @len: pointer to a ulong variable, will hold component size | 
|  | * | 
|  | * image_multi_getimg() returns size and data address for the requested | 
|  | * component in a multi component image. | 
|  | * | 
|  | * Note: no checking of the image type is done, caller must pass | 
|  | * a valid multi component image. | 
|  | * | 
|  | * returns: | 
|  | *     data address and size of the component, if idx is valid | 
|  | *     0 in data and len, if idx is out of range | 
|  | */ | 
|  | void image_multi_getimg (const image_header_t *hdr, ulong idx, | 
|  | ulong *data, ulong *len) | 
|  | { | 
|  | int i; | 
|  | uint32_t *size; | 
|  | ulong offset, count, img_data; | 
|  |  | 
|  | /* get number of component */ | 
|  | count = image_multi_count (hdr); | 
|  |  | 
|  | /* get start of the image payload, which in case of multi | 
|  | * component images that points to a table of component sizes */ | 
|  | size = (uint32_t *)image_get_data (hdr); | 
|  |  | 
|  | /* get address of the proper component data start, which means | 
|  | * skipping sizes table (add 1 for last, null entry) */ | 
|  | img_data = image_get_data (hdr) + (count + 1) * sizeof (uint32_t); | 
|  |  | 
|  | if (idx < count) { | 
|  | *len = uimage_to_cpu (size[idx]); | 
|  | offset = 0; | 
|  |  | 
|  | /* go over all indices preceding requested component idx */ | 
|  | for (i = 0; i < idx; i++) { | 
|  | /* add up i-th component size, rounding up to 4 bytes */ | 
|  | offset += (uimage_to_cpu (size[i]) + 3) & ~3 ; | 
|  | } | 
|  |  | 
|  | /* calculate idx-th component data address */ | 
|  | *data = img_data + offset; | 
|  | } else { | 
|  | *len = 0; | 
|  | *data = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void image_print_type (const image_header_t *hdr) | 
|  | { | 
|  | const char *os, *arch, *type, *comp; | 
|  |  | 
|  | os = genimg_get_os_name (image_get_os (hdr)); | 
|  | arch = genimg_get_arch_name (image_get_arch (hdr)); | 
|  | type = genimg_get_type_name (image_get_type (hdr)); | 
|  | comp = genimg_get_comp_name (image_get_comp (hdr)); | 
|  |  | 
|  | printf ("%s %s %s (%s)\n", arch, os, type, comp); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * image_print_contents - prints out the contents of the legacy format image | 
|  | * @ptr: pointer to the legacy format image header | 
|  | * @p: pointer to prefix string | 
|  | * | 
|  | * image_print_contents() formats a multi line legacy image contents description. | 
|  | * The routine prints out all header fields followed by the size/offset data | 
|  | * for MULTI/SCRIPT images. | 
|  | * | 
|  | * returns: | 
|  | *     no returned results | 
|  | */ | 
|  | void image_print_contents (const void *ptr) | 
|  | { | 
|  | const image_header_t *hdr = (const image_header_t *)ptr; | 
|  | const char *p; | 
|  |  | 
|  | #ifdef USE_HOSTCC | 
|  | p = ""; | 
|  | #else | 
|  | p = "   "; | 
|  | #endif | 
|  |  | 
|  | printf ("%sImage Name:   %.*s\n", p, IH_NMLEN, image_get_name (hdr)); | 
|  | #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC) | 
|  | printf ("%sCreated:      ", p); | 
|  | genimg_print_time ((time_t)image_get_time (hdr)); | 
|  | #endif | 
|  | printf ("%sImage Type:   ", p); | 
|  | image_print_type (hdr); | 
|  | printf ("%sData Size:    ", p); | 
|  | genimg_print_size (image_get_data_size (hdr)); | 
|  | printf ("%sLoad Address: %08x\n", p, image_get_load (hdr)); | 
|  | printf ("%sEntry Point:  %08x\n", p, image_get_ep (hdr)); | 
|  |  | 
|  | if (image_check_type (hdr, IH_TYPE_MULTI) || | 
|  | image_check_type (hdr, IH_TYPE_SCRIPT)) { | 
|  | int i; | 
|  | ulong data, len; | 
|  | ulong count = image_multi_count (hdr); | 
|  |  | 
|  | printf ("%sContents:\n", p); | 
|  | for (i = 0; i < count; i++) { | 
|  | image_multi_getimg (hdr, i, &data, &len); | 
|  |  | 
|  | printf ("%s   Image %d: ", p, i); | 
|  | genimg_print_size (len); | 
|  |  | 
|  | if (image_check_type (hdr, IH_TYPE_SCRIPT) && i > 0) { | 
|  | /* | 
|  | * the user may need to know offsets | 
|  | * if planning to do something with | 
|  | * multiple files | 
|  | */ | 
|  | printf ("%s    Offset = 0x%08lx\n", p, data); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifndef USE_HOSTCC | 
|  | /** | 
|  | * image_get_ramdisk - get and verify ramdisk image | 
|  | * @rd_addr: ramdisk image start address | 
|  | * @arch: expected ramdisk architecture | 
|  | * @verify: checksum verification flag | 
|  | * | 
|  | * image_get_ramdisk() returns a pointer to the verified ramdisk image | 
|  | * header. Routine receives image start address and expected architecture | 
|  | * flag. Verification done covers data and header integrity and os/type/arch | 
|  | * fields checking. | 
|  | * | 
|  | * If dataflash support is enabled routine checks for dataflash addresses | 
|  | * and handles required dataflash reads. | 
|  | * | 
|  | * returns: | 
|  | *     pointer to a ramdisk image header, if image was found and valid | 
|  | *     otherwise, return NULL | 
|  | */ | 
|  | static const image_header_t *image_get_ramdisk (ulong rd_addr, uint8_t arch, | 
|  | int verify) | 
|  | { | 
|  | const image_header_t *rd_hdr = (const image_header_t *)rd_addr; | 
|  |  | 
|  | if (!image_check_magic (rd_hdr)) { | 
|  | puts ("Bad Magic Number\n"); | 
|  | show_boot_progress (-10); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | if (!image_check_hcrc (rd_hdr)) { | 
|  | puts ("Bad Header Checksum\n"); | 
|  | show_boot_progress (-11); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | show_boot_progress (10); | 
|  | image_print_contents (rd_hdr); | 
|  |  | 
|  | if (verify) { | 
|  | puts("   Verifying Checksum ... "); | 
|  | if (!image_check_dcrc (rd_hdr)) { | 
|  | puts ("Bad Data CRC\n"); | 
|  | show_boot_progress (-12); | 
|  | return NULL; | 
|  | } | 
|  | puts("OK\n"); | 
|  | } | 
|  |  | 
|  | show_boot_progress (11); | 
|  |  | 
|  | if (!image_check_os (rd_hdr, IH_OS_LINUX) || | 
|  | !image_check_arch (rd_hdr, arch) || | 
|  | !image_check_type (rd_hdr, IH_TYPE_RAMDISK)) { | 
|  | printf ("No Linux %s Ramdisk Image\n", | 
|  | genimg_get_arch_name(arch)); | 
|  | show_boot_progress (-13); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | return rd_hdr; | 
|  | } | 
|  | #endif /* !USE_HOSTCC */ | 
|  |  | 
|  | /*****************************************************************************/ | 
|  | /* Shared dual-format routines */ | 
|  | /*****************************************************************************/ | 
|  | #ifndef USE_HOSTCC | 
|  | int getenv_yesno (char *var) | 
|  | { | 
|  | char *s = getenv (var); | 
|  | return (s && (*s == 'n')) ? 0 : 1; | 
|  | } | 
|  |  | 
|  | ulong getenv_bootm_low(void) | 
|  | { | 
|  | char *s = getenv ("bootm_low"); | 
|  | if (s) { | 
|  | ulong tmp = simple_strtoul (s, NULL, 16); | 
|  | return tmp; | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_SYS_SDRAM_BASE) | 
|  | return CONFIG_SYS_SDRAM_BASE; | 
|  | #elif defined(CONFIG_ARM) | 
|  | return gd->bd->bi_dram[0].start; | 
|  | #else | 
|  | return 0; | 
|  | #endif | 
|  | } | 
|  |  | 
|  | phys_size_t getenv_bootm_size(void) | 
|  | { | 
|  | phys_size_t tmp; | 
|  | char *s = getenv ("bootm_size"); | 
|  | if (s) { | 
|  | tmp = (phys_size_t)simple_strtoull (s, NULL, 16); | 
|  | return tmp; | 
|  | } | 
|  | s = getenv("bootm_low"); | 
|  | if (s) | 
|  | tmp = (phys_size_t)simple_strtoull (s, NULL, 16); | 
|  | else | 
|  | tmp = 0; | 
|  |  | 
|  |  | 
|  | #if defined(CONFIG_ARM) | 
|  | return gd->bd->bi_dram[0].size - tmp; | 
|  | #else | 
|  | return gd->bd->bi_memsize - tmp; | 
|  | #endif | 
|  | } | 
|  |  | 
|  | void memmove_wd (void *to, void *from, size_t len, ulong chunksz) | 
|  | { | 
|  | if (to == from) | 
|  | return; | 
|  |  | 
|  | #if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) | 
|  | while (len > 0) { | 
|  | size_t tail = (len > chunksz) ? chunksz : len; | 
|  | WATCHDOG_RESET (); | 
|  | memmove (to, from, tail); | 
|  | to += tail; | 
|  | from += tail; | 
|  | len -= tail; | 
|  | } | 
|  | #else	/* !(CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG) */ | 
|  | memmove (to, from, len); | 
|  | #endif	/* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */ | 
|  | } | 
|  | #endif /* !USE_HOSTCC */ | 
|  |  | 
|  | void genimg_print_size (uint32_t size) | 
|  | { | 
|  | #ifndef USE_HOSTCC | 
|  | printf ("%d Bytes = ", size); | 
|  | print_size (size, "\n"); | 
|  | #else | 
|  | printf ("%d Bytes = %.2f kB = %.2f MB\n", | 
|  | size, (double)size / 1.024e3, | 
|  | (double)size / 1.048576e6); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC) | 
|  | static void genimg_print_time (time_t timestamp) | 
|  | { | 
|  | #ifndef USE_HOSTCC | 
|  | struct rtc_time tm; | 
|  |  | 
|  | to_tm (timestamp, &tm); | 
|  | printf ("%4d-%02d-%02d  %2d:%02d:%02d UTC\n", | 
|  | tm.tm_year, tm.tm_mon, tm.tm_mday, | 
|  | tm.tm_hour, tm.tm_min, tm.tm_sec); | 
|  | #else | 
|  | printf ("%s", ctime(×tamp)); | 
|  | #endif | 
|  | } | 
|  | #endif /* CONFIG_TIMESTAMP || CONFIG_CMD_DATE || USE_HOSTCC */ | 
|  |  | 
|  | /** | 
|  | * get_table_entry_name - translate entry id to long name | 
|  | * @table: pointer to a translation table for entries of a specific type | 
|  | * @msg: message to be returned when translation fails | 
|  | * @id: entry id to be translated | 
|  | * | 
|  | * get_table_entry_name() will go over translation table trying to find | 
|  | * entry that matches given id. If matching entry is found, its long | 
|  | * name is returned to the caller. | 
|  | * | 
|  | * returns: | 
|  | *     long entry name if translation succeeds | 
|  | *     msg otherwise | 
|  | */ | 
|  | char *get_table_entry_name(const table_entry_t *table, char *msg, int id) | 
|  | { | 
|  | for (; table->id >= 0; ++table) { | 
|  | if (table->id == id) | 
|  | #if defined(USE_HOSTCC) || !defined(CONFIG_NEEDS_MANUAL_RELOC) | 
|  | return table->lname; | 
|  | #else | 
|  | return table->lname + gd->reloc_off; | 
|  | #endif | 
|  | } | 
|  | return (msg); | 
|  | } | 
|  |  | 
|  | const char *genimg_get_os_name (uint8_t os) | 
|  | { | 
|  | return (get_table_entry_name (uimage_os, "Unknown OS", os)); | 
|  | } | 
|  |  | 
|  | const char *genimg_get_arch_name (uint8_t arch) | 
|  | { | 
|  | return (get_table_entry_name (uimage_arch, "Unknown Architecture", arch)); | 
|  | } | 
|  |  | 
|  | const char *genimg_get_type_name (uint8_t type) | 
|  | { | 
|  | return (get_table_entry_name (uimage_type, "Unknown Image", type)); | 
|  | } | 
|  |  | 
|  | const char *genimg_get_comp_name (uint8_t comp) | 
|  | { | 
|  | return (get_table_entry_name (uimage_comp, "Unknown Compression", comp)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * get_table_entry_id - translate short entry name to id | 
|  | * @table: pointer to a translation table for entries of a specific type | 
|  | * @table_name: to be used in case of error | 
|  | * @name: entry short name to be translated | 
|  | * | 
|  | * get_table_entry_id() will go over translation table trying to find | 
|  | * entry that matches given short name. If matching entry is found, | 
|  | * its id returned to the caller. | 
|  | * | 
|  | * returns: | 
|  | *     entry id if translation succeeds | 
|  | *     -1 otherwise | 
|  | */ | 
|  | int get_table_entry_id(const table_entry_t *table, | 
|  | const char *table_name, const char *name) | 
|  | { | 
|  | const table_entry_t *t; | 
|  | #ifdef USE_HOSTCC | 
|  | int first = 1; | 
|  |  | 
|  | for (t = table; t->id >= 0; ++t) { | 
|  | if (t->sname && strcasecmp(t->sname, name) == 0) | 
|  | return (t->id); | 
|  | } | 
|  |  | 
|  | fprintf (stderr, "\nInvalid %s Type - valid names are", table_name); | 
|  | for (t = table; t->id >= 0; ++t) { | 
|  | if (t->sname == NULL) | 
|  | continue; | 
|  | fprintf (stderr, "%c %s", (first) ? ':' : ',', t->sname); | 
|  | first = 0; | 
|  | } | 
|  | fprintf (stderr, "\n"); | 
|  | #else | 
|  | for (t = table; t->id >= 0; ++t) { | 
|  | #ifdef CONFIG_NEEDS_MANUAL_RELOC | 
|  | if (t->sname && strcmp(t->sname + gd->reloc_off, name) == 0) | 
|  | #else | 
|  | if (t->sname && strcmp(t->sname, name) == 0) | 
|  | #endif | 
|  | return (t->id); | 
|  | } | 
|  | debug ("Invalid %s Type: %s\n", table_name, name); | 
|  | #endif /* USE_HOSTCC */ | 
|  | return (-1); | 
|  | } | 
|  |  | 
|  | int genimg_get_os_id (const char *name) | 
|  | { | 
|  | return (get_table_entry_id (uimage_os, "OS", name)); | 
|  | } | 
|  |  | 
|  | int genimg_get_arch_id (const char *name) | 
|  | { | 
|  | return (get_table_entry_id (uimage_arch, "CPU", name)); | 
|  | } | 
|  |  | 
|  | int genimg_get_type_id (const char *name) | 
|  | { | 
|  | return (get_table_entry_id (uimage_type, "Image", name)); | 
|  | } | 
|  |  | 
|  | int genimg_get_comp_id (const char *name) | 
|  | { | 
|  | return (get_table_entry_id (uimage_comp, "Compression", name)); | 
|  | } | 
|  |  | 
|  | #ifndef USE_HOSTCC | 
|  | /** | 
|  | * genimg_get_format - get image format type | 
|  | * @img_addr: image start address | 
|  | * | 
|  | * genimg_get_format() checks whether provided address points to a valid | 
|  | * legacy or FIT image. | 
|  | * | 
|  | * New uImage format and FDT blob are based on a libfdt. FDT blob | 
|  | * may be passed directly or embedded in a FIT image. In both situations | 
|  | * genimg_get_format() must be able to dectect libfdt header. | 
|  | * | 
|  | * returns: | 
|  | *     image format type or IMAGE_FORMAT_INVALID if no image is present | 
|  | */ | 
|  | int genimg_get_format (void *img_addr) | 
|  | { | 
|  | ulong format = IMAGE_FORMAT_INVALID; | 
|  | const image_header_t *hdr; | 
|  | #if defined(CONFIG_FIT) || defined(CONFIG_OF_LIBFDT) | 
|  | char *fit_hdr; | 
|  | #endif | 
|  |  | 
|  | hdr = (const image_header_t *)img_addr; | 
|  | if (image_check_magic(hdr)) | 
|  | format = IMAGE_FORMAT_LEGACY; | 
|  | #if defined(CONFIG_FIT) || defined(CONFIG_OF_LIBFDT) | 
|  | else { | 
|  | fit_hdr = (char *)img_addr; | 
|  | if (fdt_check_header (fit_hdr) == 0) | 
|  | format = IMAGE_FORMAT_FIT; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return format; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * genimg_get_image - get image from special storage (if necessary) | 
|  | * @img_addr: image start address | 
|  | * | 
|  | * genimg_get_image() checks if provided image start adddress is located | 
|  | * in a dataflash storage. If so, image is moved to a system RAM memory. | 
|  | * | 
|  | * returns: | 
|  | *     image start address after possible relocation from special storage | 
|  | */ | 
|  | ulong genimg_get_image (ulong img_addr) | 
|  | { | 
|  | ulong ram_addr = img_addr; | 
|  |  | 
|  | #ifdef CONFIG_HAS_DATAFLASH | 
|  | ulong h_size, d_size; | 
|  |  | 
|  | if (addr_dataflash (img_addr)){ | 
|  | /* ger RAM address */ | 
|  | ram_addr = CONFIG_SYS_LOAD_ADDR; | 
|  |  | 
|  | /* get header size */ | 
|  | h_size = image_get_header_size (); | 
|  | #if defined(CONFIG_FIT) | 
|  | if (sizeof(struct fdt_header) > h_size) | 
|  | h_size = sizeof(struct fdt_header); | 
|  | #endif | 
|  |  | 
|  | /* read in header */ | 
|  | debug ("   Reading image header from dataflash address " | 
|  | "%08lx to RAM address %08lx\n", img_addr, ram_addr); | 
|  |  | 
|  | read_dataflash (img_addr, h_size, (char *)ram_addr); | 
|  |  | 
|  | /* get data size */ | 
|  | switch (genimg_get_format ((void *)ram_addr)) { | 
|  | case IMAGE_FORMAT_LEGACY: | 
|  | d_size = image_get_data_size ((const image_header_t *)ram_addr); | 
|  | debug ("   Legacy format image found at 0x%08lx, size 0x%08lx\n", | 
|  | ram_addr, d_size); | 
|  | break; | 
|  | #if defined(CONFIG_FIT) | 
|  | case IMAGE_FORMAT_FIT: | 
|  | d_size = fit_get_size ((const void *)ram_addr) - h_size; | 
|  | debug ("   FIT/FDT format image found at 0x%08lx, size 0x%08lx\n", | 
|  | ram_addr, d_size); | 
|  | break; | 
|  | #endif | 
|  | default: | 
|  | printf ("   No valid image found at 0x%08lx\n", img_addr); | 
|  | return ram_addr; | 
|  | } | 
|  |  | 
|  | /* read in image data */ | 
|  | debug ("   Reading image remaining data from dataflash address " | 
|  | "%08lx to RAM address %08lx\n", img_addr + h_size, | 
|  | ram_addr + h_size); | 
|  |  | 
|  | read_dataflash (img_addr + h_size, d_size, | 
|  | (char *)(ram_addr + h_size)); | 
|  |  | 
|  | } | 
|  | #endif /* CONFIG_HAS_DATAFLASH */ | 
|  |  | 
|  | return ram_addr; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_has_config - check if there is a valid FIT configuration | 
|  | * @images: pointer to the bootm command headers structure | 
|  | * | 
|  | * fit_has_config() checks if there is a FIT configuration in use | 
|  | * (if FTI support is present). | 
|  | * | 
|  | * returns: | 
|  | *     0, no FIT support or no configuration found | 
|  | *     1, configuration found | 
|  | */ | 
|  | int genimg_has_config (bootm_headers_t *images) | 
|  | { | 
|  | #if defined(CONFIG_FIT) | 
|  | if (images->fit_uname_cfg) | 
|  | return 1; | 
|  | #endif | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * boot_get_ramdisk - main ramdisk handling routine | 
|  | * @argc: command argument count | 
|  | * @argv: command argument list | 
|  | * @images: pointer to the bootm images structure | 
|  | * @arch: expected ramdisk architecture | 
|  | * @rd_start: pointer to a ulong variable, will hold ramdisk start address | 
|  | * @rd_end: pointer to a ulong variable, will hold ramdisk end | 
|  | * | 
|  | * boot_get_ramdisk() is responsible for finding a valid ramdisk image. | 
|  | * Curently supported are the following ramdisk sources: | 
|  | *      - multicomponent kernel/ramdisk image, | 
|  | *      - commandline provided address of decicated ramdisk image. | 
|  | * | 
|  | * returns: | 
|  | *     0, if ramdisk image was found and valid, or skiped | 
|  | *     rd_start and rd_end are set to ramdisk start/end addresses if | 
|  | *     ramdisk image is found and valid | 
|  | * | 
|  | *     1, if ramdisk image is found but corrupted, or invalid | 
|  | *     rd_start and rd_end are set to 0 if no ramdisk exists | 
|  | */ | 
|  | int boot_get_ramdisk (int argc, char * const argv[], bootm_headers_t *images, | 
|  | uint8_t arch, ulong *rd_start, ulong *rd_end) | 
|  | { | 
|  | ulong rd_addr, rd_load; | 
|  | ulong rd_data, rd_len; | 
|  | const image_header_t *rd_hdr; | 
|  | #if defined(CONFIG_FIT) | 
|  | void		*fit_hdr; | 
|  | const char	*fit_uname_config = NULL; | 
|  | const char	*fit_uname_ramdisk = NULL; | 
|  | ulong		default_addr; | 
|  | int		rd_noffset; | 
|  | int		cfg_noffset; | 
|  | const void	*data; | 
|  | size_t		size; | 
|  | #endif | 
|  |  | 
|  | *rd_start = 0; | 
|  | *rd_end = 0; | 
|  |  | 
|  | /* | 
|  | * Look for a '-' which indicates to ignore the | 
|  | * ramdisk argument | 
|  | */ | 
|  | if ((argc >= 3) && (strcmp(argv[2], "-") ==  0)) { | 
|  | debug ("## Skipping init Ramdisk\n"); | 
|  | rd_len = rd_data = 0; | 
|  | } else if (argc >= 3 || genimg_has_config (images)) { | 
|  | #if defined(CONFIG_FIT) | 
|  | if (argc >= 3) { | 
|  | /* | 
|  | * If the init ramdisk comes from the FIT image and | 
|  | * the FIT image address is omitted in the command | 
|  | * line argument, try to use os FIT image address or | 
|  | * default load address. | 
|  | */ | 
|  | if (images->fit_uname_os) | 
|  | default_addr = (ulong)images->fit_hdr_os; | 
|  | else | 
|  | default_addr = load_addr; | 
|  |  | 
|  | if (fit_parse_conf (argv[2], default_addr, | 
|  | &rd_addr, &fit_uname_config)) { | 
|  | debug ("*  ramdisk: config '%s' from image at 0x%08lx\n", | 
|  | fit_uname_config, rd_addr); | 
|  | } else if (fit_parse_subimage (argv[2], default_addr, | 
|  | &rd_addr, &fit_uname_ramdisk)) { | 
|  | debug ("*  ramdisk: subimage '%s' from image at 0x%08lx\n", | 
|  | fit_uname_ramdisk, rd_addr); | 
|  | } else | 
|  | #endif | 
|  | { | 
|  | rd_addr = simple_strtoul(argv[2], NULL, 16); | 
|  | debug ("*  ramdisk: cmdline image address = 0x%08lx\n", | 
|  | rd_addr); | 
|  | } | 
|  | #if defined(CONFIG_FIT) | 
|  | } else { | 
|  | /* use FIT configuration provided in first bootm | 
|  | * command argument | 
|  | */ | 
|  | rd_addr = (ulong)images->fit_hdr_os; | 
|  | fit_uname_config = images->fit_uname_cfg; | 
|  | debug ("*  ramdisk: using config '%s' from image at 0x%08lx\n", | 
|  | fit_uname_config, rd_addr); | 
|  |  | 
|  | /* | 
|  | * Check whether configuration has ramdisk defined, | 
|  | * if not, don't try to use it, quit silently. | 
|  | */ | 
|  | fit_hdr = (void *)rd_addr; | 
|  | cfg_noffset = fit_conf_get_node (fit_hdr, fit_uname_config); | 
|  | if (cfg_noffset < 0) { | 
|  | debug ("*  ramdisk: no such config\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | rd_noffset = fit_conf_get_ramdisk_node (fit_hdr, cfg_noffset); | 
|  | if (rd_noffset < 0) { | 
|  | debug ("*  ramdisk: no ramdisk in config\n"); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* copy from dataflash if needed */ | 
|  | rd_addr = genimg_get_image (rd_addr); | 
|  |  | 
|  | /* | 
|  | * Check if there is an initrd image at the | 
|  | * address provided in the second bootm argument | 
|  | * check image type, for FIT images get FIT node. | 
|  | */ | 
|  | switch (genimg_get_format ((void *)rd_addr)) { | 
|  | case IMAGE_FORMAT_LEGACY: | 
|  | printf ("## Loading init Ramdisk from Legacy " | 
|  | "Image at %08lx ...\n", rd_addr); | 
|  |  | 
|  | show_boot_progress (9); | 
|  | rd_hdr = image_get_ramdisk (rd_addr, arch, | 
|  | images->verify); | 
|  |  | 
|  | if (rd_hdr == NULL) | 
|  | return 1; | 
|  |  | 
|  | rd_data = image_get_data (rd_hdr); | 
|  | rd_len = image_get_data_size (rd_hdr); | 
|  | rd_load = image_get_load (rd_hdr); | 
|  | break; | 
|  | #if defined(CONFIG_FIT) | 
|  | case IMAGE_FORMAT_FIT: | 
|  | fit_hdr = (void *)rd_addr; | 
|  | printf ("## Loading init Ramdisk from FIT " | 
|  | "Image at %08lx ...\n", rd_addr); | 
|  |  | 
|  | show_boot_progress (120); | 
|  | if (!fit_check_format (fit_hdr)) { | 
|  | puts ("Bad FIT ramdisk image format!\n"); | 
|  | show_boot_progress (-120); | 
|  | return 1; | 
|  | } | 
|  | show_boot_progress (121); | 
|  |  | 
|  | if (!fit_uname_ramdisk) { | 
|  | /* | 
|  | * no ramdisk image node unit name, try to get config | 
|  | * node first. If config unit node name is NULL | 
|  | * fit_conf_get_node() will try to find default config node | 
|  | */ | 
|  | show_boot_progress (122); | 
|  | cfg_noffset = fit_conf_get_node (fit_hdr, fit_uname_config); | 
|  | if (cfg_noffset < 0) { | 
|  | puts ("Could not find configuration node\n"); | 
|  | show_boot_progress (-122); | 
|  | return 1; | 
|  | } | 
|  | fit_uname_config = fdt_get_name (fit_hdr, cfg_noffset, NULL); | 
|  | printf ("   Using '%s' configuration\n", fit_uname_config); | 
|  |  | 
|  | rd_noffset = fit_conf_get_ramdisk_node (fit_hdr, cfg_noffset); | 
|  | fit_uname_ramdisk = fit_get_name (fit_hdr, rd_noffset, NULL); | 
|  | } else { | 
|  | /* get ramdisk component image node offset */ | 
|  | show_boot_progress (123); | 
|  | rd_noffset = fit_image_get_node (fit_hdr, fit_uname_ramdisk); | 
|  | } | 
|  | if (rd_noffset < 0) { | 
|  | puts ("Could not find subimage node\n"); | 
|  | show_boot_progress (-124); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | printf ("   Trying '%s' ramdisk subimage\n", fit_uname_ramdisk); | 
|  |  | 
|  | show_boot_progress (125); | 
|  | if (!fit_check_ramdisk (fit_hdr, rd_noffset, arch, images->verify)) | 
|  | return 1; | 
|  |  | 
|  | /* get ramdisk image data address and length */ | 
|  | if (fit_image_get_data (fit_hdr, rd_noffset, &data, &size)) { | 
|  | puts ("Could not find ramdisk subimage data!\n"); | 
|  | show_boot_progress (-127); | 
|  | return 1; | 
|  | } | 
|  | show_boot_progress (128); | 
|  |  | 
|  | rd_data = (ulong)data; | 
|  | rd_len = size; | 
|  |  | 
|  | if (fit_image_get_load (fit_hdr, rd_noffset, &rd_load)) { | 
|  | puts ("Can't get ramdisk subimage load address!\n"); | 
|  | show_boot_progress (-129); | 
|  | return 1; | 
|  | } | 
|  | show_boot_progress (129); | 
|  |  | 
|  | images->fit_hdr_rd = fit_hdr; | 
|  | images->fit_uname_rd = fit_uname_ramdisk; | 
|  | images->fit_noffset_rd = rd_noffset; | 
|  | break; | 
|  | #endif | 
|  | default: | 
|  | puts ("Wrong Ramdisk Image Format\n"); | 
|  | rd_data = rd_len = rd_load = 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_B2) || defined(CONFIG_EVB4510) || defined(CONFIG_ARMADILLO) | 
|  | /* | 
|  | * We need to copy the ramdisk to SRAM to let Linux boot | 
|  | */ | 
|  | if (rd_data) { | 
|  | memmove ((void *)rd_load, (uchar *)rd_data, rd_len); | 
|  | rd_data = rd_load; | 
|  | } | 
|  | #endif /* CONFIG_B2 || CONFIG_EVB4510 || CONFIG_ARMADILLO */ | 
|  |  | 
|  | } else if (images->legacy_hdr_valid && | 
|  | image_check_type (&images->legacy_hdr_os_copy, IH_TYPE_MULTI)) { | 
|  | /* | 
|  | * Now check if we have a legacy mult-component image, | 
|  | * get second entry data start address and len. | 
|  | */ | 
|  | show_boot_progress (13); | 
|  | printf ("## Loading init Ramdisk from multi component " | 
|  | "Legacy Image at %08lx ...\n", | 
|  | (ulong)images->legacy_hdr_os); | 
|  |  | 
|  | image_multi_getimg (images->legacy_hdr_os, 1, &rd_data, &rd_len); | 
|  | } else { | 
|  | /* | 
|  | * no initrd image | 
|  | */ | 
|  | show_boot_progress (14); | 
|  | rd_len = rd_data = 0; | 
|  | } | 
|  |  | 
|  | if (!rd_data) { | 
|  | debug ("## No init Ramdisk\n"); | 
|  | } else { | 
|  | *rd_start = rd_data; | 
|  | *rd_end = rd_data + rd_len; | 
|  | } | 
|  | debug ("   ramdisk start = 0x%08lx, ramdisk end = 0x%08lx\n", | 
|  | *rd_start, *rd_end); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH | 
|  | /** | 
|  | * boot_ramdisk_high - relocate init ramdisk | 
|  | * @lmb: pointer to lmb handle, will be used for memory mgmt | 
|  | * @rd_data: ramdisk data start address | 
|  | * @rd_len: ramdisk data length | 
|  | * @initrd_start: pointer to a ulong variable, will hold final init ramdisk | 
|  | *      start address (after possible relocation) | 
|  | * @initrd_end: pointer to a ulong variable, will hold final init ramdisk | 
|  | *      end address (after possible relocation) | 
|  | * | 
|  | * boot_ramdisk_high() takes a relocation hint from "initrd_high" environement | 
|  | * variable and if requested ramdisk data is moved to a specified location. | 
|  | * | 
|  | * Initrd_start and initrd_end are set to final (after relocation) ramdisk | 
|  | * start/end addresses if ramdisk image start and len were provided, | 
|  | * otherwise set initrd_start and initrd_end set to zeros. | 
|  | * | 
|  | * returns: | 
|  | *      0 - success | 
|  | *     -1 - failure | 
|  | */ | 
|  | int boot_ramdisk_high (struct lmb *lmb, ulong rd_data, ulong rd_len, | 
|  | ulong *initrd_start, ulong *initrd_end) | 
|  | { | 
|  | char	*s; | 
|  | ulong	initrd_high; | 
|  | int	initrd_copy_to_ram = 1; | 
|  |  | 
|  | if ((s = getenv ("initrd_high")) != NULL) { | 
|  | /* a value of "no" or a similar string will act like 0, | 
|  | * turning the "load high" feature off. This is intentional. | 
|  | */ | 
|  | initrd_high = simple_strtoul (s, NULL, 16); | 
|  | if (initrd_high == ~0) | 
|  | initrd_copy_to_ram = 0; | 
|  | } else { | 
|  | /* not set, no restrictions to load high */ | 
|  | initrd_high = ~0; | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifdef CONFIG_LOGBUFFER | 
|  | /* Prevent initrd from overwriting logbuffer */ | 
|  | lmb_reserve(lmb, logbuffer_base() - LOGBUFF_OVERHEAD, LOGBUFF_RESERVE); | 
|  | #endif | 
|  |  | 
|  | debug ("## initrd_high = 0x%08lx, copy_to_ram = %d\n", | 
|  | initrd_high, initrd_copy_to_ram); | 
|  |  | 
|  | if (rd_data) { | 
|  | if (!initrd_copy_to_ram) {	/* zero-copy ramdisk support */ | 
|  | debug ("   in-place initrd\n"); | 
|  | *initrd_start = rd_data; | 
|  | *initrd_end = rd_data + rd_len; | 
|  | lmb_reserve(lmb, rd_data, rd_len); | 
|  | } else { | 
|  | if (initrd_high) | 
|  | *initrd_start = (ulong)lmb_alloc_base (lmb, rd_len, 0x1000, initrd_high); | 
|  | else | 
|  | *initrd_start = (ulong)lmb_alloc (lmb, rd_len, 0x1000); | 
|  |  | 
|  | if (*initrd_start == 0) { | 
|  | puts ("ramdisk - allocation error\n"); | 
|  | goto error; | 
|  | } | 
|  | show_boot_progress (12); | 
|  |  | 
|  | *initrd_end = *initrd_start + rd_len; | 
|  | printf ("   Loading Ramdisk to %08lx, end %08lx ... ", | 
|  | *initrd_start, *initrd_end); | 
|  |  | 
|  | memmove_wd ((void *)*initrd_start, | 
|  | (void *)rd_data, rd_len, CHUNKSZ); | 
|  |  | 
|  | puts ("OK\n"); | 
|  | } | 
|  | } else { | 
|  | *initrd_start = 0; | 
|  | *initrd_end = 0; | 
|  | } | 
|  | debug ("   ramdisk load start = 0x%08lx, ramdisk load end = 0x%08lx\n", | 
|  | *initrd_start, *initrd_end); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | error: | 
|  | return -1; | 
|  | } | 
|  | #endif /* CONFIG_SYS_BOOT_RAMDISK_HIGH */ | 
|  |  | 
|  | #ifdef CONFIG_OF_LIBFDT | 
|  | static void fdt_error (const char *msg) | 
|  | { | 
|  | puts ("ERROR: "); | 
|  | puts (msg); | 
|  | puts (" - must RESET the board to recover.\n"); | 
|  | } | 
|  |  | 
|  | static const image_header_t *image_get_fdt (ulong fdt_addr) | 
|  | { | 
|  | const image_header_t *fdt_hdr = (const image_header_t *)fdt_addr; | 
|  |  | 
|  | image_print_contents (fdt_hdr); | 
|  |  | 
|  | puts ("   Verifying Checksum ... "); | 
|  | if (!image_check_hcrc (fdt_hdr)) { | 
|  | fdt_error ("fdt header checksum invalid"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | if (!image_check_dcrc (fdt_hdr)) { | 
|  | fdt_error ("fdt checksum invalid"); | 
|  | return NULL; | 
|  | } | 
|  | puts ("OK\n"); | 
|  |  | 
|  | if (!image_check_type (fdt_hdr, IH_TYPE_FLATDT)) { | 
|  | fdt_error ("uImage is not a fdt"); | 
|  | return NULL; | 
|  | } | 
|  | if (image_get_comp (fdt_hdr) != IH_COMP_NONE) { | 
|  | fdt_error ("uImage is compressed"); | 
|  | return NULL; | 
|  | } | 
|  | if (fdt_check_header ((char *)image_get_data (fdt_hdr)) != 0) { | 
|  | fdt_error ("uImage data is not a fdt"); | 
|  | return NULL; | 
|  | } | 
|  | return fdt_hdr; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_check_fdt - verify FIT format FDT subimage | 
|  | * @fit_hdr: pointer to the FIT  header | 
|  | * fdt_noffset: FDT subimage node offset within FIT image | 
|  | * @verify: data CRC verification flag | 
|  | * | 
|  | * fit_check_fdt() verifies integrity of the FDT subimage and from | 
|  | * specified FIT image. | 
|  | * | 
|  | * returns: | 
|  | *     1, on success | 
|  | *     0, on failure | 
|  | */ | 
|  | #if defined(CONFIG_FIT) | 
|  | static int fit_check_fdt (const void *fit, int fdt_noffset, int verify) | 
|  | { | 
|  | fit_image_print (fit, fdt_noffset, "   "); | 
|  |  | 
|  | if (verify) { | 
|  | puts ("   Verifying Hash Integrity ... "); | 
|  | if (!fit_image_check_hashes (fit, fdt_noffset)) { | 
|  | fdt_error ("Bad Data Hash"); | 
|  | return 0; | 
|  | } | 
|  | puts ("OK\n"); | 
|  | } | 
|  |  | 
|  | if (!fit_image_check_type (fit, fdt_noffset, IH_TYPE_FLATDT)) { | 
|  | fdt_error ("Not a FDT image"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (!fit_image_check_comp (fit, fdt_noffset, IH_COMP_NONE)) { | 
|  | fdt_error ("FDT image is compressed"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  | #endif /* CONFIG_FIT */ | 
|  |  | 
|  | #ifndef CONFIG_SYS_FDT_PAD | 
|  | #define CONFIG_SYS_FDT_PAD 0x3000 | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * boot_relocate_fdt - relocate flat device tree | 
|  | * @lmb: pointer to lmb handle, will be used for memory mgmt | 
|  | * @bootmap_base: base address of the bootmap region | 
|  | * @of_flat_tree: pointer to a char* variable, will hold fdt start address | 
|  | * @of_size: pointer to a ulong variable, will hold fdt length | 
|  | * | 
|  | * boot_relocate_fdt() allocates a region of memory within the bootmap and | 
|  | * relocates the of_flat_tree into that region, even if the fdt is already in | 
|  | * the bootmap.  It also expands the size of the fdt by CONFIG_SYS_FDT_PAD | 
|  | * bytes. | 
|  | * | 
|  | * of_flat_tree and of_size are set to final (after relocation) values | 
|  | * | 
|  | * returns: | 
|  | *      0 - success | 
|  | *      1 - failure | 
|  | */ | 
|  | #if defined(CONFIG_SYS_BOOTMAPSZ) | 
|  | int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base, | 
|  | char **of_flat_tree, ulong *of_size) | 
|  | { | 
|  | void	*fdt_blob = *of_flat_tree; | 
|  | void	*of_start = 0; | 
|  | ulong	of_len = 0; | 
|  | int	err; | 
|  |  | 
|  | /* nothing to do */ | 
|  | if (*of_size == 0) | 
|  | return 0; | 
|  |  | 
|  | if (fdt_check_header (fdt_blob) != 0) { | 
|  | fdt_error ("image is not a fdt"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | /* position on a 4K boundary before the alloc_current */ | 
|  | /* Pad the FDT by a specified amount */ | 
|  | of_len = *of_size + CONFIG_SYS_FDT_PAD; | 
|  | of_start = (void *)(unsigned long)lmb_alloc_base(lmb, of_len, 0x1000, | 
|  | (CONFIG_SYS_BOOTMAPSZ + bootmap_base)); | 
|  |  | 
|  | if (of_start == 0) { | 
|  | puts("device tree - allocation error\n"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | debug ("## device tree at %p ... %p (len=%ld [0x%lX])\n", | 
|  | fdt_blob, fdt_blob + *of_size - 1, of_len, of_len); | 
|  |  | 
|  | printf ("   Loading Device Tree to %p, end %p ... ", | 
|  | of_start, of_start + of_len - 1); | 
|  |  | 
|  | err = fdt_open_into (fdt_blob, of_start, of_len); | 
|  | if (err != 0) { | 
|  | fdt_error ("fdt move failed"); | 
|  | goto error; | 
|  | } | 
|  | puts ("OK\n"); | 
|  |  | 
|  | *of_flat_tree = of_start; | 
|  | *of_size = of_len; | 
|  |  | 
|  | set_working_fdt_addr(*of_flat_tree); | 
|  | return 0; | 
|  |  | 
|  | error: | 
|  | return 1; | 
|  | } | 
|  | #endif /* CONFIG_SYS_BOOTMAPSZ */ | 
|  |  | 
|  | /** | 
|  | * boot_get_fdt - main fdt handling routine | 
|  | * @argc: command argument count | 
|  | * @argv: command argument list | 
|  | * @images: pointer to the bootm images structure | 
|  | * @of_flat_tree: pointer to a char* variable, will hold fdt start address | 
|  | * @of_size: pointer to a ulong variable, will hold fdt length | 
|  | * | 
|  | * boot_get_fdt() is responsible for finding a valid flat device tree image. | 
|  | * Curently supported are the following ramdisk sources: | 
|  | *      - multicomponent kernel/ramdisk image, | 
|  | *      - commandline provided address of decicated ramdisk image. | 
|  | * | 
|  | * returns: | 
|  | *     0, if fdt image was found and valid, or skipped | 
|  | *     of_flat_tree and of_size are set to fdt start address and length if | 
|  | *     fdt image is found and valid | 
|  | * | 
|  | *     1, if fdt image is found but corrupted | 
|  | *     of_flat_tree and of_size are set to 0 if no fdt exists | 
|  | */ | 
|  | int boot_get_fdt (int flag, int argc, char * const argv[], bootm_headers_t *images, | 
|  | char **of_flat_tree, ulong *of_size) | 
|  | { | 
|  | const image_header_t *fdt_hdr; | 
|  | ulong		fdt_addr; | 
|  | char		*fdt_blob = NULL; | 
|  | ulong		image_start, image_end; | 
|  | ulong		load_start, load_end; | 
|  | #if defined(CONFIG_FIT) | 
|  | void		*fit_hdr; | 
|  | const char	*fit_uname_config = NULL; | 
|  | const char	*fit_uname_fdt = NULL; | 
|  | ulong		default_addr; | 
|  | int		cfg_noffset; | 
|  | int		fdt_noffset; | 
|  | const void	*data; | 
|  | size_t		size; | 
|  | #endif | 
|  |  | 
|  | *of_flat_tree = NULL; | 
|  | *of_size = 0; | 
|  |  | 
|  | if (argc > 3 || genimg_has_config (images)) { | 
|  | #if defined(CONFIG_FIT) | 
|  | if (argc > 3) { | 
|  | /* | 
|  | * If the FDT blob comes from the FIT image and the | 
|  | * FIT image address is omitted in the command line | 
|  | * argument, try to use ramdisk or os FIT image | 
|  | * address or default load address. | 
|  | */ | 
|  | if (images->fit_uname_rd) | 
|  | default_addr = (ulong)images->fit_hdr_rd; | 
|  | else if (images->fit_uname_os) | 
|  | default_addr = (ulong)images->fit_hdr_os; | 
|  | else | 
|  | default_addr = load_addr; | 
|  |  | 
|  | if (fit_parse_conf (argv[3], default_addr, | 
|  | &fdt_addr, &fit_uname_config)) { | 
|  | debug ("*  fdt: config '%s' from image at 0x%08lx\n", | 
|  | fit_uname_config, fdt_addr); | 
|  | } else if (fit_parse_subimage (argv[3], default_addr, | 
|  | &fdt_addr, &fit_uname_fdt)) { | 
|  | debug ("*  fdt: subimage '%s' from image at 0x%08lx\n", | 
|  | fit_uname_fdt, fdt_addr); | 
|  | } else | 
|  | #endif | 
|  | { | 
|  | fdt_addr = simple_strtoul(argv[3], NULL, 16); | 
|  | debug ("*  fdt: cmdline image address = 0x%08lx\n", | 
|  | fdt_addr); | 
|  | } | 
|  | #if defined(CONFIG_FIT) | 
|  | } else { | 
|  | /* use FIT configuration provided in first bootm | 
|  | * command argument | 
|  | */ | 
|  | fdt_addr = (ulong)images->fit_hdr_os; | 
|  | fit_uname_config = images->fit_uname_cfg; | 
|  | debug ("*  fdt: using config '%s' from image at 0x%08lx\n", | 
|  | fit_uname_config, fdt_addr); | 
|  |  | 
|  | /* | 
|  | * Check whether configuration has FDT blob defined, | 
|  | * if not quit silently. | 
|  | */ | 
|  | fit_hdr = (void *)fdt_addr; | 
|  | cfg_noffset = fit_conf_get_node (fit_hdr, | 
|  | fit_uname_config); | 
|  | if (cfg_noffset < 0) { | 
|  | debug ("*  fdt: no such config\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | fdt_noffset = fit_conf_get_fdt_node (fit_hdr, | 
|  | cfg_noffset); | 
|  | if (fdt_noffset < 0) { | 
|  | debug ("*  fdt: no fdt in config\n"); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | debug ("## Checking for 'FDT'/'FDT Image' at %08lx\n", | 
|  | fdt_addr); | 
|  |  | 
|  | /* copy from dataflash if needed */ | 
|  | fdt_addr = genimg_get_image (fdt_addr); | 
|  |  | 
|  | /* | 
|  | * Check if there is an FDT image at the | 
|  | * address provided in the second bootm argument | 
|  | * check image type, for FIT images get a FIT node. | 
|  | */ | 
|  | switch (genimg_get_format ((void *)fdt_addr)) { | 
|  | case IMAGE_FORMAT_LEGACY: | 
|  | /* verify fdt_addr points to a valid image header */ | 
|  | printf ("## Flattened Device Tree from Legacy Image at %08lx\n", | 
|  | fdt_addr); | 
|  | fdt_hdr = image_get_fdt (fdt_addr); | 
|  | if (!fdt_hdr) | 
|  | goto error; | 
|  |  | 
|  | /* | 
|  | * move image data to the load address, | 
|  | * make sure we don't overwrite initial image | 
|  | */ | 
|  | image_start = (ulong)fdt_hdr; | 
|  | image_end = image_get_image_end (fdt_hdr); | 
|  |  | 
|  | load_start = image_get_load (fdt_hdr); | 
|  | load_end = load_start + image_get_data_size (fdt_hdr); | 
|  |  | 
|  | if ((load_start < image_end) && (load_end > image_start)) { | 
|  | fdt_error ("fdt overwritten"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | debug ("   Loading FDT from 0x%08lx to 0x%08lx\n", | 
|  | image_get_data (fdt_hdr), load_start); | 
|  |  | 
|  | memmove ((void *)load_start, | 
|  | (void *)image_get_data (fdt_hdr), | 
|  | image_get_data_size (fdt_hdr)); | 
|  |  | 
|  | fdt_blob = (char *)load_start; | 
|  | break; | 
|  | case IMAGE_FORMAT_FIT: | 
|  | /* | 
|  | * This case will catch both: new uImage format | 
|  | * (libfdt based) and raw FDT blob (also libfdt | 
|  | * based). | 
|  | */ | 
|  | #if defined(CONFIG_FIT) | 
|  | /* check FDT blob vs FIT blob */ | 
|  | if (fit_check_format ((const void *)fdt_addr)) { | 
|  | /* | 
|  | * FIT image | 
|  | */ | 
|  | fit_hdr = (void *)fdt_addr; | 
|  | printf ("## Flattened Device Tree from FIT Image at %08lx\n", | 
|  | fdt_addr); | 
|  |  | 
|  | if (!fit_uname_fdt) { | 
|  | /* | 
|  | * no FDT blob image node unit name, | 
|  | * try to get config node first. If | 
|  | * config unit node name is NULL | 
|  | * fit_conf_get_node() will try to | 
|  | * find default config node | 
|  | */ | 
|  | cfg_noffset = fit_conf_get_node (fit_hdr, | 
|  | fit_uname_config); | 
|  |  | 
|  | if (cfg_noffset < 0) { | 
|  | fdt_error ("Could not find configuration node\n"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | fit_uname_config = fdt_get_name (fit_hdr, | 
|  | cfg_noffset, NULL); | 
|  | printf ("   Using '%s' configuration\n", | 
|  | fit_uname_config); | 
|  |  | 
|  | fdt_noffset = fit_conf_get_fdt_node (fit_hdr, | 
|  | cfg_noffset); | 
|  | fit_uname_fdt = fit_get_name (fit_hdr, | 
|  | fdt_noffset, NULL); | 
|  | } else { | 
|  | /* get FDT component image node offset */ | 
|  | fdt_noffset = fit_image_get_node (fit_hdr, | 
|  | fit_uname_fdt); | 
|  | } | 
|  | if (fdt_noffset < 0) { | 
|  | fdt_error ("Could not find subimage node\n"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | printf ("   Trying '%s' FDT blob subimage\n", | 
|  | fit_uname_fdt); | 
|  |  | 
|  | if (!fit_check_fdt (fit_hdr, fdt_noffset, | 
|  | images->verify)) | 
|  | goto error; | 
|  |  | 
|  | /* get ramdisk image data address and length */ | 
|  | if (fit_image_get_data (fit_hdr, fdt_noffset, | 
|  | &data, &size)) { | 
|  | fdt_error ("Could not find FDT subimage data"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | /* verift that image data is a proper FDT blob */ | 
|  | if (fdt_check_header ((char *)data) != 0) { | 
|  | fdt_error ("Subimage data is not a FTD"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * move image data to the load address, | 
|  | * make sure we don't overwrite initial image | 
|  | */ | 
|  | image_start = (ulong)fit_hdr; | 
|  | image_end = fit_get_end (fit_hdr); | 
|  |  | 
|  | if (fit_image_get_load (fit_hdr, fdt_noffset, | 
|  | &load_start) == 0) { | 
|  | load_end = load_start + size; | 
|  |  | 
|  | if ((load_start < image_end) && | 
|  | (load_end > image_start)) { | 
|  | fdt_error ("FDT overwritten"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | printf ("   Loading FDT from 0x%08lx to 0x%08lx\n", | 
|  | (ulong)data, load_start); | 
|  |  | 
|  | memmove ((void *)load_start, | 
|  | (void *)data, size); | 
|  |  | 
|  | fdt_blob = (char *)load_start; | 
|  | } else { | 
|  | fdt_blob = (char *)data; | 
|  | } | 
|  |  | 
|  | images->fit_hdr_fdt = fit_hdr; | 
|  | images->fit_uname_fdt = fit_uname_fdt; | 
|  | images->fit_noffset_fdt = fdt_noffset; | 
|  | break; | 
|  | } else | 
|  | #endif | 
|  | { | 
|  | /* | 
|  | * FDT blob | 
|  | */ | 
|  | fdt_blob = (char *)fdt_addr; | 
|  | debug ("*  fdt: raw FDT blob\n"); | 
|  | printf ("## Flattened Device Tree blob at %08lx\n", (long)fdt_blob); | 
|  | } | 
|  | break; | 
|  | default: | 
|  | puts ("ERROR: Did not find a cmdline Flattened Device Tree\n"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | printf ("   Booting using the fdt blob at 0x%x\n", (int)fdt_blob); | 
|  |  | 
|  | } else if (images->legacy_hdr_valid && | 
|  | image_check_type (&images->legacy_hdr_os_copy, IH_TYPE_MULTI)) { | 
|  |  | 
|  | ulong fdt_data, fdt_len; | 
|  |  | 
|  | /* | 
|  | * Now check if we have a legacy multi-component image, | 
|  | * get second entry data start address and len. | 
|  | */ | 
|  | printf ("## Flattened Device Tree from multi " | 
|  | "component Image at %08lX\n", | 
|  | (ulong)images->legacy_hdr_os); | 
|  |  | 
|  | image_multi_getimg (images->legacy_hdr_os, 2, &fdt_data, &fdt_len); | 
|  | if (fdt_len) { | 
|  |  | 
|  | fdt_blob = (char *)fdt_data; | 
|  | printf ("   Booting using the fdt at 0x%x\n", (int)fdt_blob); | 
|  |  | 
|  | if (fdt_check_header (fdt_blob) != 0) { | 
|  | fdt_error ("image is not a fdt"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | if (fdt_totalsize(fdt_blob) != fdt_len) { | 
|  | fdt_error ("fdt size != image size"); | 
|  | goto error; | 
|  | } | 
|  | } else { | 
|  | debug ("## No Flattened Device Tree\n"); | 
|  | return 0; | 
|  | } | 
|  | } else { | 
|  | debug ("## No Flattened Device Tree\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | *of_flat_tree = fdt_blob; | 
|  | *of_size = fdt_totalsize(fdt_blob); | 
|  | debug ("   of_flat_tree at 0x%08lx size 0x%08lx\n", | 
|  | (ulong)*of_flat_tree, *of_size); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | error: | 
|  | *of_flat_tree = 0; | 
|  | *of_size = 0; | 
|  | return 1; | 
|  | } | 
|  | #endif /* CONFIG_OF_LIBFDT */ | 
|  |  | 
|  | #ifdef CONFIG_SYS_BOOT_GET_CMDLINE | 
|  | /** | 
|  | * boot_get_cmdline - allocate and initialize kernel cmdline | 
|  | * @lmb: pointer to lmb handle, will be used for memory mgmt | 
|  | * @cmd_start: pointer to a ulong variable, will hold cmdline start | 
|  | * @cmd_end: pointer to a ulong variable, will hold cmdline end | 
|  | * @bootmap_base: ulong variable, holds offset in physical memory to | 
|  | * base of bootmap | 
|  | * | 
|  | * boot_get_cmdline() allocates space for kernel command line below | 
|  | * BOOTMAPSZ + bootmap_base address. If "bootargs" U-boot environemnt | 
|  | * variable is present its contents is copied to allocated kernel | 
|  | * command line. | 
|  | * | 
|  | * returns: | 
|  | *      0 - success | 
|  | *     -1 - failure | 
|  | */ | 
|  | int boot_get_cmdline (struct lmb *lmb, ulong *cmd_start, ulong *cmd_end, | 
|  | ulong bootmap_base) | 
|  | { | 
|  | char *cmdline; | 
|  | char *s; | 
|  |  | 
|  | cmdline = (char *)(ulong)lmb_alloc_base(lmb, CONFIG_SYS_BARGSIZE, 0xf, | 
|  | CONFIG_SYS_BOOTMAPSZ + bootmap_base); | 
|  |  | 
|  | if (cmdline == NULL) | 
|  | return -1; | 
|  |  | 
|  | if ((s = getenv("bootargs")) == NULL) | 
|  | s = ""; | 
|  |  | 
|  | strcpy(cmdline, s); | 
|  |  | 
|  | *cmd_start = (ulong) & cmdline[0]; | 
|  | *cmd_end = *cmd_start + strlen(cmdline); | 
|  |  | 
|  | debug ("## cmdline at 0x%08lx ... 0x%08lx\n", *cmd_start, *cmd_end); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif /* CONFIG_SYS_BOOT_GET_CMDLINE */ | 
|  |  | 
|  | #ifdef CONFIG_SYS_BOOT_GET_KBD | 
|  | /** | 
|  | * boot_get_kbd - allocate and initialize kernel copy of board info | 
|  | * @lmb: pointer to lmb handle, will be used for memory mgmt | 
|  | * @kbd: double pointer to board info data | 
|  | * @bootmap_base: ulong variable, holds offset in physical memory to | 
|  | * base of bootmap | 
|  | * | 
|  | * boot_get_kbd() allocates space for kernel copy of board info data below | 
|  | * BOOTMAPSZ + bootmap_base address and kernel board info is initialized with | 
|  | * the current u-boot board info data. | 
|  | * | 
|  | * returns: | 
|  | *      0 - success | 
|  | *     -1 - failure | 
|  | */ | 
|  | int boot_get_kbd (struct lmb *lmb, bd_t **kbd, ulong bootmap_base) | 
|  | { | 
|  | *kbd = (bd_t *)(ulong)lmb_alloc_base(lmb, sizeof(bd_t), 0xf, | 
|  | CONFIG_SYS_BOOTMAPSZ + bootmap_base); | 
|  | if (*kbd == NULL) | 
|  | return -1; | 
|  |  | 
|  | **kbd = *(gd->bd); | 
|  |  | 
|  | debug ("## kernel board info at 0x%08lx\n", (ulong)*kbd); | 
|  |  | 
|  | #if defined(DEBUG) && defined(CONFIG_CMD_BDI) | 
|  | do_bdinfo(NULL, 0, 0, NULL); | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif /* CONFIG_SYS_BOOT_GET_KBD */ | 
|  | #endif /* !USE_HOSTCC */ | 
|  |  | 
|  | #if defined(CONFIG_FIT) | 
|  | /*****************************************************************************/ | 
|  | /* New uImage format routines */ | 
|  | /*****************************************************************************/ | 
|  | #ifndef USE_HOSTCC | 
|  | static int fit_parse_spec (const char *spec, char sepc, ulong addr_curr, | 
|  | ulong *addr, const char **name) | 
|  | { | 
|  | const char *sep; | 
|  |  | 
|  | *addr = addr_curr; | 
|  | *name = NULL; | 
|  |  | 
|  | sep = strchr (spec, sepc); | 
|  | if (sep) { | 
|  | if (sep - spec > 0) | 
|  | *addr = simple_strtoul (spec, NULL, 16); | 
|  |  | 
|  | *name = sep + 1; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_parse_conf - parse FIT configuration spec | 
|  | * @spec: input string, containing configuration spec | 
|  | * @add_curr: current image address (to be used as a possible default) | 
|  | * @addr: pointer to a ulong variable, will hold FIT image address of a given | 
|  | * configuration | 
|  | * @conf_name double pointer to a char, will hold pointer to a configuration | 
|  | * unit name | 
|  | * | 
|  | * fit_parse_conf() expects configuration spec in the for of [<addr>]#<conf>, | 
|  | * where <addr> is a FIT image address that contains configuration | 
|  | * with a <conf> unit name. | 
|  | * | 
|  | * Address part is optional, and if omitted default add_curr will | 
|  | * be used instead. | 
|  | * | 
|  | * returns: | 
|  | *     1 if spec is a valid configuration string, | 
|  | *     addr and conf_name are set accordingly | 
|  | *     0 otherwise | 
|  | */ | 
|  | inline int fit_parse_conf (const char *spec, ulong addr_curr, | 
|  | ulong *addr, const char **conf_name) | 
|  | { | 
|  | return fit_parse_spec (spec, '#', addr_curr, addr, conf_name); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_parse_subimage - parse FIT subimage spec | 
|  | * @spec: input string, containing subimage spec | 
|  | * @add_curr: current image address (to be used as a possible default) | 
|  | * @addr: pointer to a ulong variable, will hold FIT image address of a given | 
|  | * subimage | 
|  | * @image_name: double pointer to a char, will hold pointer to a subimage name | 
|  | * | 
|  | * fit_parse_subimage() expects subimage spec in the for of | 
|  | * [<addr>]:<subimage>, where <addr> is a FIT image address that contains | 
|  | * subimage with a <subimg> unit name. | 
|  | * | 
|  | * Address part is optional, and if omitted default add_curr will | 
|  | * be used instead. | 
|  | * | 
|  | * returns: | 
|  | *     1 if spec is a valid subimage string, | 
|  | *     addr and image_name are set accordingly | 
|  | *     0 otherwise | 
|  | */ | 
|  | inline int fit_parse_subimage (const char *spec, ulong addr_curr, | 
|  | ulong *addr, const char **image_name) | 
|  | { | 
|  | return fit_parse_spec (spec, ':', addr_curr, addr, image_name); | 
|  | } | 
|  | #endif /* !USE_HOSTCC */ | 
|  |  | 
|  | static void fit_get_debug (const void *fit, int noffset, | 
|  | char *prop_name, int err) | 
|  | { | 
|  | debug ("Can't get '%s' property from FIT 0x%08lx, " | 
|  | "node: offset %d, name %s (%s)\n", | 
|  | prop_name, (ulong)fit, noffset, | 
|  | fit_get_name (fit, noffset, NULL), | 
|  | fdt_strerror (err)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_print_contents - prints out the contents of the FIT format image | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @p: pointer to prefix string | 
|  | * | 
|  | * fit_print_contents() formats a multi line FIT image contents description. | 
|  | * The routine prints out FIT image properties (root node level) follwed by | 
|  | * the details of each component image. | 
|  | * | 
|  | * returns: | 
|  | *     no returned results | 
|  | */ | 
|  | void fit_print_contents (const void *fit) | 
|  | { | 
|  | char *desc; | 
|  | char *uname; | 
|  | int images_noffset; | 
|  | int confs_noffset; | 
|  | int noffset; | 
|  | int ndepth; | 
|  | int count = 0; | 
|  | int ret; | 
|  | const char *p; | 
|  | #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC) | 
|  | time_t timestamp; | 
|  | #endif | 
|  |  | 
|  | #ifdef USE_HOSTCC | 
|  | p = ""; | 
|  | #else | 
|  | p = "   "; | 
|  | #endif | 
|  |  | 
|  | /* Root node properties */ | 
|  | ret = fit_get_desc (fit, 0, &desc); | 
|  | printf ("%sFIT description: ", p); | 
|  | if (ret) | 
|  | printf ("unavailable\n"); | 
|  | else | 
|  | printf ("%s\n", desc); | 
|  |  | 
|  | #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC) | 
|  | ret = fit_get_timestamp (fit, 0, ×tamp); | 
|  | printf ("%sCreated:         ", p); | 
|  | if (ret) | 
|  | printf ("unavailable\n"); | 
|  | else | 
|  | genimg_print_time (timestamp); | 
|  | #endif | 
|  |  | 
|  | /* Find images parent node offset */ | 
|  | images_noffset = fdt_path_offset (fit, FIT_IMAGES_PATH); | 
|  | if (images_noffset < 0) { | 
|  | printf ("Can't find images parent node '%s' (%s)\n", | 
|  | FIT_IMAGES_PATH, fdt_strerror (images_noffset)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Process its subnodes, print out component images details */ | 
|  | for (ndepth = 0, count = 0, noffset = fdt_next_node (fit, images_noffset, &ndepth); | 
|  | (noffset >= 0) && (ndepth > 0); | 
|  | noffset = fdt_next_node (fit, noffset, &ndepth)) { | 
|  | if (ndepth == 1) { | 
|  | /* | 
|  | * Direct child node of the images parent node, | 
|  | * i.e. component image node. | 
|  | */ | 
|  | printf ("%s Image %u (%s)\n", p, count++, | 
|  | fit_get_name(fit, noffset, NULL)); | 
|  |  | 
|  | fit_image_print (fit, noffset, p); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Find configurations parent node offset */ | 
|  | confs_noffset = fdt_path_offset (fit, FIT_CONFS_PATH); | 
|  | if (confs_noffset < 0) { | 
|  | debug ("Can't get configurations parent node '%s' (%s)\n", | 
|  | FIT_CONFS_PATH, fdt_strerror (confs_noffset)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* get default configuration unit name from default property */ | 
|  | uname = (char *)fdt_getprop (fit, noffset, FIT_DEFAULT_PROP, NULL); | 
|  | if (uname) | 
|  | printf ("%s Default Configuration: '%s'\n", p, uname); | 
|  |  | 
|  | /* Process its subnodes, print out configurations details */ | 
|  | for (ndepth = 0, count = 0, noffset = fdt_next_node (fit, confs_noffset, &ndepth); | 
|  | (noffset >= 0) && (ndepth > 0); | 
|  | noffset = fdt_next_node (fit, noffset, &ndepth)) { | 
|  | if (ndepth == 1) { | 
|  | /* | 
|  | * Direct child node of the configurations parent node, | 
|  | * i.e. configuration node. | 
|  | */ | 
|  | printf ("%s Configuration %u (%s)\n", p, count++, | 
|  | fit_get_name(fit, noffset, NULL)); | 
|  |  | 
|  | fit_conf_print (fit, noffset, p); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_print - prints out the FIT component image details | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @image_noffset: offset of the component image node | 
|  | * @p: pointer to prefix string | 
|  | * | 
|  | * fit_image_print() lists all mandatory properies for the processed component | 
|  | * image. If present, hash nodes are printed out as well. Load | 
|  | * address for images of type firmware is also printed out. Since the load | 
|  | * address is not mandatory for firmware images, it will be output as | 
|  | * "unavailable" when not present. | 
|  | * | 
|  | * returns: | 
|  | *     no returned results | 
|  | */ | 
|  | void fit_image_print (const void *fit, int image_noffset, const char *p) | 
|  | { | 
|  | char *desc; | 
|  | uint8_t type, arch, os, comp; | 
|  | size_t size; | 
|  | ulong load, entry; | 
|  | const void *data; | 
|  | int noffset; | 
|  | int ndepth; | 
|  | int ret; | 
|  |  | 
|  | /* Mandatory properties */ | 
|  | ret = fit_get_desc (fit, image_noffset, &desc); | 
|  | printf ("%s  Description:  ", p); | 
|  | if (ret) | 
|  | printf ("unavailable\n"); | 
|  | else | 
|  | printf ("%s\n", desc); | 
|  |  | 
|  | fit_image_get_type (fit, image_noffset, &type); | 
|  | printf ("%s  Type:         %s\n", p, genimg_get_type_name (type)); | 
|  |  | 
|  | fit_image_get_comp (fit, image_noffset, &comp); | 
|  | printf ("%s  Compression:  %s\n", p, genimg_get_comp_name (comp)); | 
|  |  | 
|  | ret = fit_image_get_data (fit, image_noffset, &data, &size); | 
|  |  | 
|  | #ifndef USE_HOSTCC | 
|  | printf ("%s  Data Start:   ", p); | 
|  | if (ret) | 
|  | printf ("unavailable\n"); | 
|  | else | 
|  | printf ("0x%08lx\n", (ulong)data); | 
|  | #endif | 
|  |  | 
|  | printf ("%s  Data Size:    ", p); | 
|  | if (ret) | 
|  | printf ("unavailable\n"); | 
|  | else | 
|  | genimg_print_size (size); | 
|  |  | 
|  | /* Remaining, type dependent properties */ | 
|  | if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) || | 
|  | (type == IH_TYPE_RAMDISK) || (type == IH_TYPE_FIRMWARE) || | 
|  | (type == IH_TYPE_FLATDT)) { | 
|  | fit_image_get_arch (fit, image_noffset, &arch); | 
|  | printf ("%s  Architecture: %s\n", p, genimg_get_arch_name (arch)); | 
|  | } | 
|  |  | 
|  | if (type == IH_TYPE_KERNEL) { | 
|  | fit_image_get_os (fit, image_noffset, &os); | 
|  | printf ("%s  OS:           %s\n", p, genimg_get_os_name (os)); | 
|  | } | 
|  |  | 
|  | if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) || | 
|  | (type == IH_TYPE_FIRMWARE)) { | 
|  | ret = fit_image_get_load (fit, image_noffset, &load); | 
|  | printf ("%s  Load Address: ", p); | 
|  | if (ret) | 
|  | printf ("unavailable\n"); | 
|  | else | 
|  | printf ("0x%08lx\n", load); | 
|  | } | 
|  |  | 
|  | if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE)) { | 
|  | fit_image_get_entry (fit, image_noffset, &entry); | 
|  | printf ("%s  Entry Point:  ", p); | 
|  | if (ret) | 
|  | printf ("unavailable\n"); | 
|  | else | 
|  | printf ("0x%08lx\n", entry); | 
|  | } | 
|  |  | 
|  | /* Process all hash subnodes of the component image node */ | 
|  | for (ndepth = 0, noffset = fdt_next_node (fit, image_noffset, &ndepth); | 
|  | (noffset >= 0) && (ndepth > 0); | 
|  | noffset = fdt_next_node (fit, noffset, &ndepth)) { | 
|  | if (ndepth == 1) { | 
|  | /* Direct child node of the component image node */ | 
|  | fit_image_print_hash (fit, noffset, p); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_print_hash - prints out the hash node details | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: offset of the hash node | 
|  | * @p: pointer to prefix string | 
|  | * | 
|  | * fit_image_print_hash() lists properies for the processed hash node | 
|  | * | 
|  | * returns: | 
|  | *     no returned results | 
|  | */ | 
|  | void fit_image_print_hash (const void *fit, int noffset, const char *p) | 
|  | { | 
|  | char *algo; | 
|  | uint8_t *value; | 
|  | int value_len; | 
|  | int i, ret; | 
|  |  | 
|  | /* | 
|  | * Check subnode name, must be equal to "hash". | 
|  | * Multiple hash nodes require unique unit node | 
|  | * names, e.g. hash@1, hash@2, etc. | 
|  | */ | 
|  | if (strncmp (fit_get_name(fit, noffset, NULL), | 
|  | FIT_HASH_NODENAME, | 
|  | strlen(FIT_HASH_NODENAME)) != 0) | 
|  | return; | 
|  |  | 
|  | debug ("%s  Hash node:    '%s'\n", p, | 
|  | fit_get_name (fit, noffset, NULL)); | 
|  |  | 
|  | printf ("%s  Hash algo:    ", p); | 
|  | if (fit_image_hash_get_algo (fit, noffset, &algo)) { | 
|  | printf ("invalid/unsupported\n"); | 
|  | return; | 
|  | } | 
|  | printf ("%s\n", algo); | 
|  |  | 
|  | ret = fit_image_hash_get_value (fit, noffset, &value, | 
|  | &value_len); | 
|  | printf ("%s  Hash value:   ", p); | 
|  | if (ret) { | 
|  | printf ("unavailable\n"); | 
|  | } else { | 
|  | for (i = 0; i < value_len; i++) | 
|  | printf ("%02x", value[i]); | 
|  | printf ("\n"); | 
|  | } | 
|  |  | 
|  | debug  ("%s  Hash len:     %d\n", p, value_len); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_get_desc - get node description property | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: node offset | 
|  | * @desc: double pointer to the char, will hold pointer to the descrption | 
|  | * | 
|  | * fit_get_desc() reads description property from a given node, if | 
|  | * description is found pointer to it is returened in third call argument. | 
|  | * | 
|  | * returns: | 
|  | *     0, on success | 
|  | *     -1, on failure | 
|  | */ | 
|  | int fit_get_desc (const void *fit, int noffset, char **desc) | 
|  | { | 
|  | int len; | 
|  |  | 
|  | *desc = (char *)fdt_getprop (fit, noffset, FIT_DESC_PROP, &len); | 
|  | if (*desc == NULL) { | 
|  | fit_get_debug (fit, noffset, FIT_DESC_PROP, len); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_get_timestamp - get node timestamp property | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: node offset | 
|  | * @timestamp: pointer to the time_t, will hold read timestamp | 
|  | * | 
|  | * fit_get_timestamp() reads timestamp poperty from given node, if timestamp | 
|  | * is found and has a correct size its value is retured in third call | 
|  | * argument. | 
|  | * | 
|  | * returns: | 
|  | *     0, on success | 
|  | *     -1, on property read failure | 
|  | *     -2, on wrong timestamp size | 
|  | */ | 
|  | int fit_get_timestamp (const void *fit, int noffset, time_t *timestamp) | 
|  | { | 
|  | int len; | 
|  | const void *data; | 
|  |  | 
|  | data = fdt_getprop (fit, noffset, FIT_TIMESTAMP_PROP, &len); | 
|  | if (data == NULL) { | 
|  | fit_get_debug (fit, noffset, FIT_TIMESTAMP_PROP, len); | 
|  | return -1; | 
|  | } | 
|  | if (len != sizeof (uint32_t)) { | 
|  | debug ("FIT timestamp with incorrect size of (%u)\n", len); | 
|  | return -2; | 
|  | } | 
|  |  | 
|  | *timestamp = uimage_to_cpu (*((uint32_t *)data)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_get_node - get node offset for component image of a given unit name | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @image_uname: component image node unit name | 
|  | * | 
|  | * fit_image_get_node() finds a component image (withing the '/images' | 
|  | * node) of a provided unit name. If image is found its node offset is | 
|  | * returned to the caller. | 
|  | * | 
|  | * returns: | 
|  | *     image node offset when found (>=0) | 
|  | *     negative number on failure (FDT_ERR_* code) | 
|  | */ | 
|  | int fit_image_get_node (const void *fit, const char *image_uname) | 
|  | { | 
|  | int noffset, images_noffset; | 
|  |  | 
|  | images_noffset = fdt_path_offset (fit, FIT_IMAGES_PATH); | 
|  | if (images_noffset < 0) { | 
|  | debug ("Can't find images parent node '%s' (%s)\n", | 
|  | FIT_IMAGES_PATH, fdt_strerror (images_noffset)); | 
|  | return images_noffset; | 
|  | } | 
|  |  | 
|  | noffset = fdt_subnode_offset (fit, images_noffset, image_uname); | 
|  | if (noffset < 0) { | 
|  | debug ("Can't get node offset for image unit name: '%s' (%s)\n", | 
|  | image_uname, fdt_strerror (noffset)); | 
|  | } | 
|  |  | 
|  | return noffset; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_get_os - get os id for a given component image node | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: component image node offset | 
|  | * @os: pointer to the uint8_t, will hold os numeric id | 
|  | * | 
|  | * fit_image_get_os() finds os property in a given component image node. | 
|  | * If the property is found, its (string) value is translated to the numeric | 
|  | * id which is returned to the caller. | 
|  | * | 
|  | * returns: | 
|  | *     0, on success | 
|  | *     -1, on failure | 
|  | */ | 
|  | int fit_image_get_os (const void *fit, int noffset, uint8_t *os) | 
|  | { | 
|  | int len; | 
|  | const void *data; | 
|  |  | 
|  | /* Get OS name from property data */ | 
|  | data = fdt_getprop (fit, noffset, FIT_OS_PROP, &len); | 
|  | if (data == NULL) { | 
|  | fit_get_debug (fit, noffset, FIT_OS_PROP, len); | 
|  | *os = -1; | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* Translate OS name to id */ | 
|  | *os = genimg_get_os_id (data); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_get_arch - get arch id for a given component image node | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: component image node offset | 
|  | * @arch: pointer to the uint8_t, will hold arch numeric id | 
|  | * | 
|  | * fit_image_get_arch() finds arch property in a given component image node. | 
|  | * If the property is found, its (string) value is translated to the numeric | 
|  | * id which is returned to the caller. | 
|  | * | 
|  | * returns: | 
|  | *     0, on success | 
|  | *     -1, on failure | 
|  | */ | 
|  | int fit_image_get_arch (const void *fit, int noffset, uint8_t *arch) | 
|  | { | 
|  | int len; | 
|  | const void *data; | 
|  |  | 
|  | /* Get architecture name from property data */ | 
|  | data = fdt_getprop (fit, noffset, FIT_ARCH_PROP, &len); | 
|  | if (data == NULL) { | 
|  | fit_get_debug (fit, noffset, FIT_ARCH_PROP, len); | 
|  | *arch = -1; | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* Translate architecture name to id */ | 
|  | *arch = genimg_get_arch_id (data); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_get_type - get type id for a given component image node | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: component image node offset | 
|  | * @type: pointer to the uint8_t, will hold type numeric id | 
|  | * | 
|  | * fit_image_get_type() finds type property in a given component image node. | 
|  | * If the property is found, its (string) value is translated to the numeric | 
|  | * id which is returned to the caller. | 
|  | * | 
|  | * returns: | 
|  | *     0, on success | 
|  | *     -1, on failure | 
|  | */ | 
|  | int fit_image_get_type (const void *fit, int noffset, uint8_t *type) | 
|  | { | 
|  | int len; | 
|  | const void *data; | 
|  |  | 
|  | /* Get image type name from property data */ | 
|  | data = fdt_getprop (fit, noffset, FIT_TYPE_PROP, &len); | 
|  | if (data == NULL) { | 
|  | fit_get_debug (fit, noffset, FIT_TYPE_PROP, len); | 
|  | *type = -1; | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* Translate image type name to id */ | 
|  | *type = genimg_get_type_id (data); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_get_comp - get comp id for a given component image node | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: component image node offset | 
|  | * @comp: pointer to the uint8_t, will hold comp numeric id | 
|  | * | 
|  | * fit_image_get_comp() finds comp property in a given component image node. | 
|  | * If the property is found, its (string) value is translated to the numeric | 
|  | * id which is returned to the caller. | 
|  | * | 
|  | * returns: | 
|  | *     0, on success | 
|  | *     -1, on failure | 
|  | */ | 
|  | int fit_image_get_comp (const void *fit, int noffset, uint8_t *comp) | 
|  | { | 
|  | int len; | 
|  | const void *data; | 
|  |  | 
|  | /* Get compression name from property data */ | 
|  | data = fdt_getprop (fit, noffset, FIT_COMP_PROP, &len); | 
|  | if (data == NULL) { | 
|  | fit_get_debug (fit, noffset, FIT_COMP_PROP, len); | 
|  | *comp = -1; | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* Translate compression name to id */ | 
|  | *comp = genimg_get_comp_id (data); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_get_load - get load address property for a given component image node | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: component image node offset | 
|  | * @load: pointer to the uint32_t, will hold load address | 
|  | * | 
|  | * fit_image_get_load() finds load address property in a given component image node. | 
|  | * If the property is found, its value is returned to the caller. | 
|  | * | 
|  | * returns: | 
|  | *     0, on success | 
|  | *     -1, on failure | 
|  | */ | 
|  | int fit_image_get_load (const void *fit, int noffset, ulong *load) | 
|  | { | 
|  | int len; | 
|  | const uint32_t *data; | 
|  |  | 
|  | data = fdt_getprop (fit, noffset, FIT_LOAD_PROP, &len); | 
|  | if (data == NULL) { | 
|  | fit_get_debug (fit, noffset, FIT_LOAD_PROP, len); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | *load = uimage_to_cpu (*data); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_get_entry - get entry point address property for a given component image node | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: component image node offset | 
|  | * @entry: pointer to the uint32_t, will hold entry point address | 
|  | * | 
|  | * fit_image_get_entry() finds entry point address property in a given component image node. | 
|  | * If the property is found, its value is returned to the caller. | 
|  | * | 
|  | * returns: | 
|  | *     0, on success | 
|  | *     -1, on failure | 
|  | */ | 
|  | int fit_image_get_entry (const void *fit, int noffset, ulong *entry) | 
|  | { | 
|  | int len; | 
|  | const uint32_t *data; | 
|  |  | 
|  | data = fdt_getprop (fit, noffset, FIT_ENTRY_PROP, &len); | 
|  | if (data == NULL) { | 
|  | fit_get_debug (fit, noffset, FIT_ENTRY_PROP, len); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | *entry = uimage_to_cpu (*data); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_get_data - get data property and its size for a given component image node | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: component image node offset | 
|  | * @data: double pointer to void, will hold data property's data address | 
|  | * @size: pointer to size_t, will hold data property's data size | 
|  | * | 
|  | * fit_image_get_data() finds data property in a given component image node. | 
|  | * If the property is found its data start address and size are returned to | 
|  | * the caller. | 
|  | * | 
|  | * returns: | 
|  | *     0, on success | 
|  | *     -1, on failure | 
|  | */ | 
|  | int fit_image_get_data (const void *fit, int noffset, | 
|  | const void **data, size_t *size) | 
|  | { | 
|  | int len; | 
|  |  | 
|  | *data = fdt_getprop (fit, noffset, FIT_DATA_PROP, &len); | 
|  | if (*data == NULL) { | 
|  | fit_get_debug (fit, noffset, FIT_DATA_PROP, len); | 
|  | *size = 0; | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | *size = len; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_hash_get_algo - get hash algorithm name | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: hash node offset | 
|  | * @algo: double pointer to char, will hold pointer to the algorithm name | 
|  | * | 
|  | * fit_image_hash_get_algo() finds hash algorithm property in a given hash node. | 
|  | * If the property is found its data start address is returned to the caller. | 
|  | * | 
|  | * returns: | 
|  | *     0, on success | 
|  | *     -1, on failure | 
|  | */ | 
|  | int fit_image_hash_get_algo (const void *fit, int noffset, char **algo) | 
|  | { | 
|  | int len; | 
|  |  | 
|  | *algo = (char *)fdt_getprop (fit, noffset, FIT_ALGO_PROP, &len); | 
|  | if (*algo == NULL) { | 
|  | fit_get_debug (fit, noffset, FIT_ALGO_PROP, len); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_hash_get_value - get hash value and length | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: hash node offset | 
|  | * @value: double pointer to uint8_t, will hold address of a hash value data | 
|  | * @value_len: pointer to an int, will hold hash data length | 
|  | * | 
|  | * fit_image_hash_get_value() finds hash value property in a given hash node. | 
|  | * If the property is found its data start address and size are returned to | 
|  | * the caller. | 
|  | * | 
|  | * returns: | 
|  | *     0, on success | 
|  | *     -1, on failure | 
|  | */ | 
|  | int fit_image_hash_get_value (const void *fit, int noffset, uint8_t **value, | 
|  | int *value_len) | 
|  | { | 
|  | int len; | 
|  |  | 
|  | *value = (uint8_t *)fdt_getprop (fit, noffset, FIT_VALUE_PROP, &len); | 
|  | if (*value == NULL) { | 
|  | fit_get_debug (fit, noffset, FIT_VALUE_PROP, len); | 
|  | *value_len = 0; | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | *value_len = len; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_set_timestamp - set node timestamp property | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: node offset | 
|  | * @timestamp: timestamp value to be set | 
|  | * | 
|  | * fit_set_timestamp() attempts to set timestamp property in the requested | 
|  | * node and returns operation status to the caller. | 
|  | * | 
|  | * returns: | 
|  | *     0, on success | 
|  | *     -1, on property read failure | 
|  | */ | 
|  | int fit_set_timestamp (void *fit, int noffset, time_t timestamp) | 
|  | { | 
|  | uint32_t t; | 
|  | int ret; | 
|  |  | 
|  | t = cpu_to_uimage (timestamp); | 
|  | ret = fdt_setprop (fit, noffset, FIT_TIMESTAMP_PROP, &t, | 
|  | sizeof (uint32_t)); | 
|  | if (ret) { | 
|  | printf ("Can't set '%s' property for '%s' node (%s)\n", | 
|  | FIT_TIMESTAMP_PROP, fit_get_name (fit, noffset, NULL), | 
|  | fdt_strerror (ret)); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * calculate_hash - calculate and return hash for provided input data | 
|  | * @data: pointer to the input data | 
|  | * @data_len: data length | 
|  | * @algo: requested hash algorithm | 
|  | * @value: pointer to the char, will hold hash value data (caller must | 
|  | * allocate enough free space) | 
|  | * value_len: length of the calculated hash | 
|  | * | 
|  | * calculate_hash() computes input data hash according to the requested algorithm. | 
|  | * Resulting hash value is placed in caller provided 'value' buffer, length | 
|  | * of the calculated hash is returned via value_len pointer argument. | 
|  | * | 
|  | * returns: | 
|  | *     0, on success | 
|  | *    -1, when algo is unsupported | 
|  | */ | 
|  | static int calculate_hash (const void *data, int data_len, const char *algo, | 
|  | uint8_t *value, int *value_len) | 
|  | { | 
|  | if (strcmp (algo, "crc32") == 0 ) { | 
|  | *((uint32_t *)value) = crc32_wd (0, data, data_len, | 
|  | CHUNKSZ_CRC32); | 
|  | *((uint32_t *)value) = cpu_to_uimage (*((uint32_t *)value)); | 
|  | *value_len = 4; | 
|  | } else if (strcmp (algo, "sha1") == 0 ) { | 
|  | sha1_csum_wd ((unsigned char *) data, data_len, | 
|  | (unsigned char *) value, CHUNKSZ_SHA1); | 
|  | *value_len = 20; | 
|  | } else if (strcmp (algo, "md5") == 0 ) { | 
|  | md5_wd ((unsigned char *)data, data_len, value, CHUNKSZ_MD5); | 
|  | *value_len = 16; | 
|  | } else { | 
|  | debug ("Unsupported hash alogrithm\n"); | 
|  | return -1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef USE_HOSTCC | 
|  | /** | 
|  | * fit_set_hashes - process FIT component image nodes and calculate hashes | 
|  | * @fit: pointer to the FIT format image header | 
|  | * | 
|  | * fit_set_hashes() adds hash values for all component images in the FIT blob. | 
|  | * Hashes are calculated for all component images which have hash subnodes | 
|  | * with algorithm property set to one of the supported hash algorithms. | 
|  | * | 
|  | * returns | 
|  | *     0, on success | 
|  | *     libfdt error code, on failure | 
|  | */ | 
|  | int fit_set_hashes (void *fit) | 
|  | { | 
|  | int images_noffset; | 
|  | int noffset; | 
|  | int ndepth; | 
|  | int ret; | 
|  |  | 
|  | /* Find images parent node offset */ | 
|  | images_noffset = fdt_path_offset (fit, FIT_IMAGES_PATH); | 
|  | if (images_noffset < 0) { | 
|  | printf ("Can't find images parent node '%s' (%s)\n", | 
|  | FIT_IMAGES_PATH, fdt_strerror (images_noffset)); | 
|  | return images_noffset; | 
|  | } | 
|  |  | 
|  | /* Process its subnodes, print out component images details */ | 
|  | for (ndepth = 0, noffset = fdt_next_node (fit, images_noffset, &ndepth); | 
|  | (noffset >= 0) && (ndepth > 0); | 
|  | noffset = fdt_next_node (fit, noffset, &ndepth)) { | 
|  | if (ndepth == 1) { | 
|  | /* | 
|  | * Direct child node of the images parent node, | 
|  | * i.e. component image node. | 
|  | */ | 
|  | ret = fit_image_set_hashes (fit, noffset); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_set_hashes - calculate/set hashes for given component image node | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @image_noffset: requested component image node | 
|  | * | 
|  | * fit_image_set_hashes() adds hash values for an component image node. All | 
|  | * existing hash subnodes are checked, if algorithm property is set to one of | 
|  | * the supported hash algorithms, hash value is computed and corresponding | 
|  | * hash node property is set, for example: | 
|  | * | 
|  | * Input component image node structure: | 
|  | * | 
|  | * o image@1 (at image_noffset) | 
|  | *   | - data = [binary data] | 
|  | *   o hash@1 | 
|  | *     |- algo = "sha1" | 
|  | * | 
|  | * Output component image node structure: | 
|  | * | 
|  | * o image@1 (at image_noffset) | 
|  | *   | - data = [binary data] | 
|  | *   o hash@1 | 
|  | *     |- algo = "sha1" | 
|  | *     |- value = sha1(data) | 
|  | * | 
|  | * returns: | 
|  | *     0 on sucess | 
|  | *    <0 on failure | 
|  | */ | 
|  | int fit_image_set_hashes (void *fit, int image_noffset) | 
|  | { | 
|  | const void *data; | 
|  | size_t size; | 
|  | char *algo; | 
|  | uint8_t value[FIT_MAX_HASH_LEN]; | 
|  | int value_len; | 
|  | int noffset; | 
|  | int ndepth; | 
|  |  | 
|  | /* Get image data and data length */ | 
|  | if (fit_image_get_data (fit, image_noffset, &data, &size)) { | 
|  | printf ("Can't get image data/size\n"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* Process all hash subnodes of the component image node */ | 
|  | for (ndepth = 0, noffset = fdt_next_node (fit, image_noffset, &ndepth); | 
|  | (noffset >= 0) && (ndepth > 0); | 
|  | noffset = fdt_next_node (fit, noffset, &ndepth)) { | 
|  | if (ndepth == 1) { | 
|  | /* Direct child node of the component image node */ | 
|  |  | 
|  | /* | 
|  | * Check subnode name, must be equal to "hash". | 
|  | * Multiple hash nodes require unique unit node | 
|  | * names, e.g. hash@1, hash@2, etc. | 
|  | */ | 
|  | if (strncmp (fit_get_name(fit, noffset, NULL), | 
|  | FIT_HASH_NODENAME, | 
|  | strlen(FIT_HASH_NODENAME)) != 0) { | 
|  | /* Not a hash subnode, skip it */ | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (fit_image_hash_get_algo (fit, noffset, &algo)) { | 
|  | printf ("Can't get hash algo property for " | 
|  | "'%s' hash node in '%s' image node\n", | 
|  | fit_get_name (fit, noffset, NULL), | 
|  | fit_get_name (fit, image_noffset, NULL)); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | if (calculate_hash (data, size, algo, value, &value_len)) { | 
|  | printf ("Unsupported hash algorithm (%s) for " | 
|  | "'%s' hash node in '%s' image node\n", | 
|  | algo, fit_get_name (fit, noffset, NULL), | 
|  | fit_get_name (fit, image_noffset, NULL)); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | if (fit_image_hash_set_value (fit, noffset, value, | 
|  | value_len)) { | 
|  | printf ("Can't set hash value for " | 
|  | "'%s' hash node in '%s' image node\n", | 
|  | fit_get_name (fit, noffset, NULL), | 
|  | fit_get_name (fit, image_noffset, NULL)); | 
|  | return -1; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_hash_set_value - set hash value in requested has node | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: hash node offset | 
|  | * @value: hash value to be set | 
|  | * @value_len: hash value length | 
|  | * | 
|  | * fit_image_hash_set_value() attempts to set hash value in a node at offset | 
|  | * given and returns operation status to the caller. | 
|  | * | 
|  | * returns | 
|  | *     0, on success | 
|  | *     -1, on failure | 
|  | */ | 
|  | int fit_image_hash_set_value (void *fit, int noffset, uint8_t *value, | 
|  | int value_len) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = fdt_setprop (fit, noffset, FIT_VALUE_PROP, value, value_len); | 
|  | if (ret) { | 
|  | printf ("Can't set hash '%s' property for '%s' node (%s)\n", | 
|  | FIT_VALUE_PROP, fit_get_name (fit, noffset, NULL), | 
|  | fdt_strerror (ret)); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif /* USE_HOSTCC */ | 
|  |  | 
|  | /** | 
|  | * fit_image_check_hashes - verify data intergity | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @image_noffset: component image node offset | 
|  | * | 
|  | * fit_image_check_hashes() goes over component image hash nodes, | 
|  | * re-calculates each data hash and compares with the value stored in hash | 
|  | * node. | 
|  | * | 
|  | * returns: | 
|  | *     1, if all hashes are valid | 
|  | *     0, otherwise (or on error) | 
|  | */ | 
|  | int fit_image_check_hashes (const void *fit, int image_noffset) | 
|  | { | 
|  | const void	*data; | 
|  | size_t		size; | 
|  | char		*algo; | 
|  | uint8_t		*fit_value; | 
|  | int		fit_value_len; | 
|  | uint8_t		value[FIT_MAX_HASH_LEN]; | 
|  | int		value_len; | 
|  | int		noffset; | 
|  | int		ndepth; | 
|  | char		*err_msg = ""; | 
|  |  | 
|  | /* Get image data and data length */ | 
|  | if (fit_image_get_data (fit, image_noffset, &data, &size)) { | 
|  | printf ("Can't get image data/size\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Process all hash subnodes of the component image node */ | 
|  | for (ndepth = 0, noffset = fdt_next_node (fit, image_noffset, &ndepth); | 
|  | (noffset >= 0) && (ndepth > 0); | 
|  | noffset = fdt_next_node (fit, noffset, &ndepth)) { | 
|  | if (ndepth == 1) { | 
|  | /* Direct child node of the component image node */ | 
|  |  | 
|  | /* | 
|  | * Check subnode name, must be equal to "hash". | 
|  | * Multiple hash nodes require unique unit node | 
|  | * names, e.g. hash@1, hash@2, etc. | 
|  | */ | 
|  | if (strncmp (fit_get_name(fit, noffset, NULL), | 
|  | FIT_HASH_NODENAME, | 
|  | strlen(FIT_HASH_NODENAME)) != 0) | 
|  | continue; | 
|  |  | 
|  | if (fit_image_hash_get_algo (fit, noffset, &algo)) { | 
|  | err_msg = " error!\nCan't get hash algo " | 
|  | "property"; | 
|  | goto error; | 
|  | } | 
|  | printf ("%s", algo); | 
|  |  | 
|  | if (fit_image_hash_get_value (fit, noffset, &fit_value, | 
|  | &fit_value_len)) { | 
|  | err_msg = " error!\nCan't get hash value " | 
|  | "property"; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | if (calculate_hash (data, size, algo, value, &value_len)) { | 
|  | err_msg = " error!\nUnsupported hash algorithm"; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | if (value_len != fit_value_len) { | 
|  | err_msg = " error !\nBad hash value len"; | 
|  | goto error; | 
|  | } else if (memcmp (value, fit_value, value_len) != 0) { | 
|  | err_msg = " error!\nBad hash value"; | 
|  | goto error; | 
|  | } | 
|  | printf ("+ "); | 
|  | } | 
|  | } | 
|  |  | 
|  | return 1; | 
|  |  | 
|  | error: | 
|  | printf ("%s for '%s' hash node in '%s' image node\n", | 
|  | err_msg, fit_get_name (fit, noffset, NULL), | 
|  | fit_get_name (fit, image_noffset, NULL)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_all_image_check_hashes - verify data intergity for all images | 
|  | * @fit: pointer to the FIT format image header | 
|  | * | 
|  | * fit_all_image_check_hashes() goes over all images in the FIT and | 
|  | * for every images checks if all it's hashes are valid. | 
|  | * | 
|  | * returns: | 
|  | *     1, if all hashes of all images are valid | 
|  | *     0, otherwise (or on error) | 
|  | */ | 
|  | int fit_all_image_check_hashes (const void *fit) | 
|  | { | 
|  | int images_noffset; | 
|  | int noffset; | 
|  | int ndepth; | 
|  | int count; | 
|  |  | 
|  | /* Find images parent node offset */ | 
|  | images_noffset = fdt_path_offset (fit, FIT_IMAGES_PATH); | 
|  | if (images_noffset < 0) { | 
|  | printf ("Can't find images parent node '%s' (%s)\n", | 
|  | FIT_IMAGES_PATH, fdt_strerror (images_noffset)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Process all image subnodes, check hashes for each */ | 
|  | printf ("## Checking hash(es) for FIT Image at %08lx ...\n", | 
|  | (ulong)fit); | 
|  | for (ndepth = 0, count = 0, | 
|  | noffset = fdt_next_node (fit, images_noffset, &ndepth); | 
|  | (noffset >= 0) && (ndepth > 0); | 
|  | noffset = fdt_next_node (fit, noffset, &ndepth)) { | 
|  | if (ndepth == 1) { | 
|  | /* | 
|  | * Direct child node of the images parent node, | 
|  | * i.e. component image node. | 
|  | */ | 
|  | printf ("   Hash(es) for Image %u (%s): ", count++, | 
|  | fit_get_name (fit, noffset, NULL)); | 
|  |  | 
|  | if (!fit_image_check_hashes (fit, noffset)) | 
|  | return 0; | 
|  | printf ("\n"); | 
|  | } | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_check_os - check whether image node is of a given os type | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: component image node offset | 
|  | * @os: requested image os | 
|  | * | 
|  | * fit_image_check_os() reads image os property and compares its numeric | 
|  | * id with the requested os. Comparison result is returned to the caller. | 
|  | * | 
|  | * returns: | 
|  | *     1 if image is of given os type | 
|  | *     0 otherwise (or on error) | 
|  | */ | 
|  | int fit_image_check_os (const void *fit, int noffset, uint8_t os) | 
|  | { | 
|  | uint8_t image_os; | 
|  |  | 
|  | if (fit_image_get_os (fit, noffset, &image_os)) | 
|  | return 0; | 
|  | return (os == image_os); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_check_arch - check whether image node is of a given arch | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: component image node offset | 
|  | * @arch: requested imagearch | 
|  | * | 
|  | * fit_image_check_arch() reads image arch property and compares its numeric | 
|  | * id with the requested arch. Comparison result is returned to the caller. | 
|  | * | 
|  | * returns: | 
|  | *     1 if image is of given arch | 
|  | *     0 otherwise (or on error) | 
|  | */ | 
|  | int fit_image_check_arch (const void *fit, int noffset, uint8_t arch) | 
|  | { | 
|  | uint8_t image_arch; | 
|  |  | 
|  | if (fit_image_get_arch (fit, noffset, &image_arch)) | 
|  | return 0; | 
|  | return (arch == image_arch); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_check_type - check whether image node is of a given type | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: component image node offset | 
|  | * @type: requested image type | 
|  | * | 
|  | * fit_image_check_type() reads image type property and compares its numeric | 
|  | * id with the requested type. Comparison result is returned to the caller. | 
|  | * | 
|  | * returns: | 
|  | *     1 if image is of given type | 
|  | *     0 otherwise (or on error) | 
|  | */ | 
|  | int fit_image_check_type (const void *fit, int noffset, uint8_t type) | 
|  | { | 
|  | uint8_t image_type; | 
|  |  | 
|  | if (fit_image_get_type (fit, noffset, &image_type)) | 
|  | return 0; | 
|  | return (type == image_type); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_image_check_comp - check whether image node uses given compression | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: component image node offset | 
|  | * @comp: requested image compression type | 
|  | * | 
|  | * fit_image_check_comp() reads image compression property and compares its | 
|  | * numeric id with the requested compression type. Comparison result is | 
|  | * returned to the caller. | 
|  | * | 
|  | * returns: | 
|  | *     1 if image uses requested compression | 
|  | *     0 otherwise (or on error) | 
|  | */ | 
|  | int fit_image_check_comp (const void *fit, int noffset, uint8_t comp) | 
|  | { | 
|  | uint8_t image_comp; | 
|  |  | 
|  | if (fit_image_get_comp (fit, noffset, &image_comp)) | 
|  | return 0; | 
|  | return (comp == image_comp); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_check_format - sanity check FIT image format | 
|  | * @fit: pointer to the FIT format image header | 
|  | * | 
|  | * fit_check_format() runs a basic sanity FIT image verification. | 
|  | * Routine checks for mandatory properties, nodes, etc. | 
|  | * | 
|  | * returns: | 
|  | *     1, on success | 
|  | *     0, on failure | 
|  | */ | 
|  | int fit_check_format (const void *fit) | 
|  | { | 
|  | /* mandatory / node 'description' property */ | 
|  | if (fdt_getprop (fit, 0, FIT_DESC_PROP, NULL) == NULL) { | 
|  | debug ("Wrong FIT format: no description\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC) | 
|  | /* mandatory / node 'timestamp' property */ | 
|  | if (fdt_getprop (fit, 0, FIT_TIMESTAMP_PROP, NULL) == NULL) { | 
|  | debug ("Wrong FIT format: no timestamp\n"); | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* mandatory subimages parent '/images' node */ | 
|  | if (fdt_path_offset (fit, FIT_IMAGES_PATH) < 0) { | 
|  | debug ("Wrong FIT format: no images parent node\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_conf_get_node - get node offset for configuration of a given unit name | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @conf_uname: configuration node unit name | 
|  | * | 
|  | * fit_conf_get_node() finds a configuration (withing the '/configurations' | 
|  | * parant node) of a provided unit name. If configuration is found its node offset | 
|  | * is returned to the caller. | 
|  | * | 
|  | * When NULL is provided in second argument fit_conf_get_node() will search | 
|  | * for a default configuration node instead. Default configuration node unit name | 
|  | * is retrived from FIT_DEFAULT_PROP property of the '/configurations' node. | 
|  | * | 
|  | * returns: | 
|  | *     configuration node offset when found (>=0) | 
|  | *     negative number on failure (FDT_ERR_* code) | 
|  | */ | 
|  | int fit_conf_get_node (const void *fit, const char *conf_uname) | 
|  | { | 
|  | int noffset, confs_noffset; | 
|  | int len; | 
|  |  | 
|  | confs_noffset = fdt_path_offset (fit, FIT_CONFS_PATH); | 
|  | if (confs_noffset < 0) { | 
|  | debug ("Can't find configurations parent node '%s' (%s)\n", | 
|  | FIT_CONFS_PATH, fdt_strerror (confs_noffset)); | 
|  | return confs_noffset; | 
|  | } | 
|  |  | 
|  | if (conf_uname == NULL) { | 
|  | /* get configuration unit name from the default property */ | 
|  | debug ("No configuration specified, trying default...\n"); | 
|  | conf_uname = (char *)fdt_getprop (fit, confs_noffset, FIT_DEFAULT_PROP, &len); | 
|  | if (conf_uname == NULL) { | 
|  | fit_get_debug (fit, confs_noffset, FIT_DEFAULT_PROP, len); | 
|  | return len; | 
|  | } | 
|  | debug ("Found default configuration: '%s'\n", conf_uname); | 
|  | } | 
|  |  | 
|  | noffset = fdt_subnode_offset (fit, confs_noffset, conf_uname); | 
|  | if (noffset < 0) { | 
|  | debug ("Can't get node offset for configuration unit name: '%s' (%s)\n", | 
|  | conf_uname, fdt_strerror (noffset)); | 
|  | } | 
|  |  | 
|  | return noffset; | 
|  | } | 
|  |  | 
|  | static int __fit_conf_get_prop_node (const void *fit, int noffset, | 
|  | const char *prop_name) | 
|  | { | 
|  | char *uname; | 
|  | int len; | 
|  |  | 
|  | /* get kernel image unit name from configuration kernel property */ | 
|  | uname = (char *)fdt_getprop (fit, noffset, prop_name, &len); | 
|  | if (uname == NULL) | 
|  | return len; | 
|  |  | 
|  | return fit_image_get_node (fit, uname); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_conf_get_kernel_node - get kernel image node offset that corresponds to | 
|  | * a given configuration | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: configuration node offset | 
|  | * | 
|  | * fit_conf_get_kernel_node() retrives kernel image node unit name from | 
|  | * configuration FIT_KERNEL_PROP property and translates it to the node | 
|  | * offset. | 
|  | * | 
|  | * returns: | 
|  | *     image node offset when found (>=0) | 
|  | *     negative number on failure (FDT_ERR_* code) | 
|  | */ | 
|  | int fit_conf_get_kernel_node (const void *fit, int noffset) | 
|  | { | 
|  | return __fit_conf_get_prop_node (fit, noffset, FIT_KERNEL_PROP); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_conf_get_ramdisk_node - get ramdisk image node offset that corresponds to | 
|  | * a given configuration | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: configuration node offset | 
|  | * | 
|  | * fit_conf_get_ramdisk_node() retrives ramdisk image node unit name from | 
|  | * configuration FIT_KERNEL_PROP property and translates it to the node | 
|  | * offset. | 
|  | * | 
|  | * returns: | 
|  | *     image node offset when found (>=0) | 
|  | *     negative number on failure (FDT_ERR_* code) | 
|  | */ | 
|  | int fit_conf_get_ramdisk_node (const void *fit, int noffset) | 
|  | { | 
|  | return __fit_conf_get_prop_node (fit, noffset, FIT_RAMDISK_PROP); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_conf_get_fdt_node - get fdt image node offset that corresponds to | 
|  | * a given configuration | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: configuration node offset | 
|  | * | 
|  | * fit_conf_get_fdt_node() retrives fdt image node unit name from | 
|  | * configuration FIT_KERNEL_PROP property and translates it to the node | 
|  | * offset. | 
|  | * | 
|  | * returns: | 
|  | *     image node offset when found (>=0) | 
|  | *     negative number on failure (FDT_ERR_* code) | 
|  | */ | 
|  | int fit_conf_get_fdt_node (const void *fit, int noffset) | 
|  | { | 
|  | return __fit_conf_get_prop_node (fit, noffset, FIT_FDT_PROP); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_conf_print - prints out the FIT configuration details | 
|  | * @fit: pointer to the FIT format image header | 
|  | * @noffset: offset of the configuration node | 
|  | * @p: pointer to prefix string | 
|  | * | 
|  | * fit_conf_print() lists all mandatory properies for the processed | 
|  | * configuration node. | 
|  | * | 
|  | * returns: | 
|  | *     no returned results | 
|  | */ | 
|  | void fit_conf_print (const void *fit, int noffset, const char *p) | 
|  | { | 
|  | char *desc; | 
|  | char *uname; | 
|  | int ret; | 
|  |  | 
|  | /* Mandatory properties */ | 
|  | ret = fit_get_desc (fit, noffset, &desc); | 
|  | printf ("%s  Description:  ", p); | 
|  | if (ret) | 
|  | printf ("unavailable\n"); | 
|  | else | 
|  | printf ("%s\n", desc); | 
|  |  | 
|  | uname = (char *)fdt_getprop (fit, noffset, FIT_KERNEL_PROP, NULL); | 
|  | printf ("%s  Kernel:       ", p); | 
|  | if (uname == NULL) | 
|  | printf ("unavailable\n"); | 
|  | else | 
|  | printf ("%s\n", uname); | 
|  |  | 
|  | /* Optional properties */ | 
|  | uname = (char *)fdt_getprop (fit, noffset, FIT_RAMDISK_PROP, NULL); | 
|  | if (uname) | 
|  | printf ("%s  Init Ramdisk: %s\n", p, uname); | 
|  |  | 
|  | uname = (char *)fdt_getprop (fit, noffset, FIT_FDT_PROP, NULL); | 
|  | if (uname) | 
|  | printf ("%s  FDT:          %s\n", p, uname); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fit_check_ramdisk - verify FIT format ramdisk subimage | 
|  | * @fit_hdr: pointer to the FIT ramdisk header | 
|  | * @rd_noffset: ramdisk subimage node offset within FIT image | 
|  | * @arch: requested ramdisk image architecture type | 
|  | * @verify: data CRC verification flag | 
|  | * | 
|  | * fit_check_ramdisk() verifies integrity of the ramdisk subimage and from | 
|  | * specified FIT image. | 
|  | * | 
|  | * returns: | 
|  | *     1, on success | 
|  | *     0, on failure | 
|  | */ | 
|  | #ifndef USE_HOSTCC | 
|  | static int fit_check_ramdisk (const void *fit, int rd_noffset, uint8_t arch, int verify) | 
|  | { | 
|  | fit_image_print (fit, rd_noffset, "   "); | 
|  |  | 
|  | if (verify) { | 
|  | puts ("   Verifying Hash Integrity ... "); | 
|  | if (!fit_image_check_hashes (fit, rd_noffset)) { | 
|  | puts ("Bad Data Hash\n"); | 
|  | show_boot_progress (-125); | 
|  | return 0; | 
|  | } | 
|  | puts ("OK\n"); | 
|  | } | 
|  |  | 
|  | show_boot_progress (126); | 
|  | if (!fit_image_check_os (fit, rd_noffset, IH_OS_LINUX) || | 
|  | !fit_image_check_arch (fit, rd_noffset, arch) || | 
|  | !fit_image_check_type (fit, rd_noffset, IH_TYPE_RAMDISK)) { | 
|  | printf ("No Linux %s Ramdisk Image\n", | 
|  | genimg_get_arch_name(arch)); | 
|  | show_boot_progress (-126); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | show_boot_progress (127); | 
|  | return 1; | 
|  | } | 
|  | #endif /* USE_HOSTCC */ | 
|  | #endif /* CONFIG_FIT */ |