|  | /* | 
|  | * (C) Copyright 2001 | 
|  | * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. | 
|  | * | 
|  | * (C) Copyright 2002 | 
|  | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | 
|  | * | 
|  | * SPDX-License-Identifier:	GPL-2.0+ | 
|  | */ | 
|  |  | 
|  | #include <common.h> | 
|  | #include <flash.h> | 
|  | #include <asm/io.h> | 
|  | #include <memio.h> | 
|  |  | 
|  | /*---------------------------------------------------------------------*/ | 
|  | #undef DEBUG_FLASH | 
|  |  | 
|  | #ifdef DEBUG_FLASH | 
|  | #define DEBUGF(fmt,args...) printf(fmt ,##args) | 
|  | #else | 
|  | #define DEBUGF(fmt,args...) | 
|  | #endif | 
|  | /*---------------------------------------------------------------------*/ | 
|  |  | 
|  | flash_info_t	flash_info[]; | 
|  |  | 
|  | static ulong flash_get_size (ulong addr, flash_info_t *info); | 
|  | static int flash_get_offsets (ulong base, flash_info_t *info); | 
|  | static int write_word (flash_info_t *info, ulong dest, ulong data); | 
|  | static void flash_reset (ulong addr); | 
|  |  | 
|  | int flash_xd_nest; | 
|  |  | 
|  | static void flash_to_xd(void) | 
|  | { | 
|  | unsigned char x; | 
|  |  | 
|  | flash_xd_nest ++; | 
|  |  | 
|  | if (flash_xd_nest == 1) | 
|  | { | 
|  | DEBUGF("Flash on XD\n"); | 
|  | x = pci_read_cfg_byte(0, 0, 0x74); | 
|  | pci_write_cfg_byte(0, 0, 0x74, x|1); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void flash_to_mem(void) | 
|  | { | 
|  | unsigned char x; | 
|  |  | 
|  | flash_xd_nest --; | 
|  |  | 
|  | if (flash_xd_nest == 0) | 
|  | { | 
|  | DEBUGF("Flash on memory bus\n"); | 
|  | x = pci_read_cfg_byte(0, 0, 0x74); | 
|  | pci_write_cfg_byte(0, 0, 0x74, x&0xFE); | 
|  | } | 
|  | } | 
|  |  | 
|  | unsigned long flash_init_old(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) | 
|  | { | 
|  | flash_info[i].flash_id = FLASH_UNKNOWN; | 
|  | flash_info[i].sector_count = 0; | 
|  | flash_info[i].size = 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | unsigned long flash_init (void) | 
|  | { | 
|  | unsigned int i; | 
|  | unsigned long flash_size = 0; | 
|  |  | 
|  | flash_xd_nest = 0; | 
|  |  | 
|  | flash_to_xd(); | 
|  |  | 
|  | /* Init: no FLASHes known */ | 
|  | for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { | 
|  | flash_info[i].flash_id = FLASH_UNKNOWN; | 
|  | flash_info[i].sector_count = 0; | 
|  | flash_info[i].size = 0; | 
|  | } | 
|  |  | 
|  | DEBUGF("\n## Get flash size @ 0x%08x\n", CONFIG_SYS_FLASH_BASE); | 
|  |  | 
|  | flash_size = flash_get_size (CONFIG_SYS_FLASH_BASE, flash_info); | 
|  |  | 
|  | DEBUGF("## Flash bank size: %08lx\n", flash_size); | 
|  |  | 
|  | if (flash_size) { | 
|  | #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE && \ | 
|  | CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_MAX_SIZE | 
|  | /* monitor protection ON by default */ | 
|  | flash_protect(FLAG_PROTECT_SET, | 
|  | CONFIG_SYS_MONITOR_BASE, | 
|  | CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, | 
|  | &flash_info[0]); | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_ENV_IS_IN_FLASH | 
|  | /* ENV protection ON by default */ | 
|  | flash_protect(FLAG_PROTECT_SET, | 
|  | CONFIG_ENV_ADDR, | 
|  | CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, | 
|  | &flash_info[0]); | 
|  | #endif | 
|  |  | 
|  | } else { | 
|  | printf ("Warning: the BOOT Flash is not initialised !"); | 
|  | } | 
|  |  | 
|  | flash_to_mem(); | 
|  |  | 
|  | return flash_size; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The following code cannot be run from FLASH! | 
|  | */ | 
|  | static ulong flash_get_size (ulong addr, flash_info_t *info) | 
|  | { | 
|  | short i; | 
|  | uchar value; | 
|  | uchar *x = (uchar *)addr; | 
|  |  | 
|  | flash_to_xd(); | 
|  |  | 
|  | /* Write auto select command: read Manufacturer ID */ | 
|  | x[0x0555] =  0xAA; | 
|  | __asm__ volatile ("sync\n eieio"); | 
|  | x[0x02AA] =  0x55; | 
|  | __asm__ volatile ("sync\n eieio"); | 
|  | x[0x0555] =  0x90; | 
|  | __asm__ volatile ("sync\n eieio"); | 
|  |  | 
|  | value = x[0]; | 
|  | __asm__ volatile ("sync\n eieio"); | 
|  |  | 
|  | DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (ulong)addr, value); | 
|  |  | 
|  | switch (value | (value << 16)) { | 
|  | case AMD_MANUFACT: | 
|  | info->flash_id = FLASH_MAN_AMD; | 
|  | break; | 
|  |  | 
|  | case FUJ_MANUFACT: | 
|  | info->flash_id = FLASH_MAN_FUJ; | 
|  | break; | 
|  |  | 
|  | case STM_MANUFACT: | 
|  | info->flash_id = FLASH_MAN_STM; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | info->flash_id = FLASH_UNKNOWN; | 
|  | info->sector_count = 0; | 
|  | info->size = 0; | 
|  | flash_reset (addr); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | value = x[1]; | 
|  | __asm__ volatile ("sync\n eieio"); | 
|  |  | 
|  | DEBUGF("Device ID @ 0x%08lx: 0x%08x\n", addr+1, value); | 
|  |  | 
|  | switch (value) { | 
|  | case AMD_ID_F040B: | 
|  | DEBUGF("Am29F040B\n"); | 
|  | info->flash_id += FLASH_AM040; | 
|  | info->sector_count = 8; | 
|  | info->size = 0x00080000; | 
|  | break;			/* => 512 kB		*/ | 
|  |  | 
|  | case AMD_ID_LV040B: | 
|  | DEBUGF("Am29LV040B\n"); | 
|  | info->flash_id += FLASH_AM040; | 
|  | info->sector_count = 8; | 
|  | info->size = 0x00080000; | 
|  | break;			/* => 512 kB		*/ | 
|  |  | 
|  | case AMD_ID_LV400T: | 
|  | DEBUGF("Am29LV400T\n"); | 
|  | info->flash_id += FLASH_AM400T; | 
|  | info->sector_count = 11; | 
|  | info->size = 0x00100000; | 
|  | break;			/* => 1 MB		*/ | 
|  |  | 
|  | case AMD_ID_LV400B: | 
|  | DEBUGF("Am29LV400B\n"); | 
|  | info->flash_id += FLASH_AM400B; | 
|  | info->sector_count = 11; | 
|  | info->size = 0x00100000; | 
|  | break;			/* => 1 MB		*/ | 
|  |  | 
|  | case AMD_ID_LV800T: | 
|  | DEBUGF("Am29LV800T\n"); | 
|  | info->flash_id += FLASH_AM800T; | 
|  | info->sector_count = 19; | 
|  | info->size = 0x00200000; | 
|  | break;			/* => 2 MB		*/ | 
|  |  | 
|  | case AMD_ID_LV800B: | 
|  | DEBUGF("Am29LV400B\n"); | 
|  | info->flash_id += FLASH_AM800B; | 
|  | info->sector_count = 19; | 
|  | info->size = 0x00200000; | 
|  | break;			/* => 2 MB		*/ | 
|  |  | 
|  | case AMD_ID_LV160T: | 
|  | DEBUGF("Am29LV160T\n"); | 
|  | info->flash_id += FLASH_AM160T; | 
|  | info->sector_count = 35; | 
|  | info->size = 0x00400000; | 
|  | break;			/* => 4 MB		*/ | 
|  |  | 
|  | case AMD_ID_LV160B: | 
|  | DEBUGF("Am29LV160B\n"); | 
|  | info->flash_id += FLASH_AM160B; | 
|  | info->sector_count = 35; | 
|  | info->size = 0x00400000; | 
|  | break;			/* => 4 MB		*/ | 
|  |  | 
|  | case AMD_ID_LV320T: | 
|  | DEBUGF("Am29LV320T\n"); | 
|  | info->flash_id += FLASH_AM320T; | 
|  | info->sector_count = 67; | 
|  | info->size = 0x00800000; | 
|  | break;			/* => 8 MB		*/ | 
|  |  | 
|  | #if 0 | 
|  | /* Has the same ID as AMD_ID_LV320T, to be fixed */ | 
|  | case AMD_ID_LV320B: | 
|  | DEBUGF("Am29LV320B\n"); | 
|  | info->flash_id += FLASH_AM320B; | 
|  | info->sector_count = 67; | 
|  | info->size = 0x00800000; | 
|  | break;			/* => 8 MB		*/ | 
|  | #endif | 
|  |  | 
|  | case AMD_ID_LV033C: | 
|  | DEBUGF("Am29LV033C\n"); | 
|  | info->flash_id += FLASH_AM033C; | 
|  | info->sector_count = 64; | 
|  | info->size = 0x01000000; | 
|  | break;			/* => 16Mb		*/ | 
|  |  | 
|  | case STM_ID_F040B: | 
|  | DEBUGF("M29F040B\n"); | 
|  | info->flash_id += FLASH_AM040; | 
|  | info->sector_count = 8; | 
|  | info->size = 0x00080000; | 
|  | break;			/* => 512 kB		*/ | 
|  |  | 
|  | default: | 
|  | info->flash_id = FLASH_UNKNOWN; | 
|  | flash_reset (addr); | 
|  | flash_to_mem(); | 
|  | return (0);		/* => no or unknown flash */ | 
|  |  | 
|  | } | 
|  |  | 
|  | if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { | 
|  | printf ("** ERROR: sector count %d > max (%d) **\n", | 
|  | info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); | 
|  | info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; | 
|  | } | 
|  |  | 
|  | if (! flash_get_offsets (addr, info)) { | 
|  | flash_reset (addr); | 
|  | flash_to_mem(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* check for protected sectors */ | 
|  | for (i = 0; i < info->sector_count; i++) { | 
|  | /* read sector protection at sector address, (A7 .. A0) = 0x02 */ | 
|  | /* D0 = 1 if protected */ | 
|  | value = in8(info->start[i] + 2); | 
|  | iobarrier_rw(); | 
|  | info->protect[i] = (value & 1) != 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Reset bank to read mode | 
|  | */ | 
|  | flash_reset (addr); | 
|  |  | 
|  | flash_to_mem(); | 
|  |  | 
|  | return (info->size); | 
|  | } | 
|  |  | 
|  | static int flash_get_offsets (ulong base, flash_info_t *info) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | switch (info->flash_id & FLASH_TYPEMASK) { | 
|  | case FLASH_AM040: | 
|  | /* set sector offsets for uniform sector type	*/ | 
|  | for (i = 0; i < info->sector_count; i++) { | 
|  | info->start[i] = base + i * info->size / | 
|  | info->sector_count; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | int flash_erase (flash_info_t *info, int s_first, int s_last) | 
|  | { | 
|  | volatile ulong addr = info->start[0]; | 
|  | int flag, prot, sect, l_sect; | 
|  | ulong start, now, last; | 
|  |  | 
|  | flash_to_xd(); | 
|  |  | 
|  | if (s_first < 0 || s_first > s_last) { | 
|  | if (info->flash_id == FLASH_UNKNOWN) { | 
|  | printf ("- missing\n"); | 
|  | } else { | 
|  | printf ("- no sectors to erase\n"); | 
|  | } | 
|  | flash_to_mem(); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if (info->flash_id == FLASH_UNKNOWN) { | 
|  | printf ("Can't erase unknown flash type %08lx - aborted\n", | 
|  | info->flash_id); | 
|  | flash_to_mem(); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | prot = 0; | 
|  | for (sect=s_first; sect<=s_last; ++sect) { | 
|  | if (info->protect[sect]) { | 
|  | prot++; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (prot) { | 
|  | printf ("- Warning: %d protected sectors will not be erased!\n", | 
|  | prot); | 
|  | } else { | 
|  | printf (""); | 
|  | } | 
|  |  | 
|  | l_sect = -1; | 
|  |  | 
|  | /* Disable interrupts which might cause a timeout here */ | 
|  | flag = disable_interrupts(); | 
|  |  | 
|  | out8(addr + 0x555, 0xAA); | 
|  | iobarrier_rw(); | 
|  | out8(addr + 0x2AA, 0x55); | 
|  | iobarrier_rw(); | 
|  | out8(addr + 0x555, 0x80); | 
|  | iobarrier_rw(); | 
|  | out8(addr + 0x555, 0xAA); | 
|  | iobarrier_rw(); | 
|  | out8(addr + 0x2AA, 0x55); | 
|  | iobarrier_rw(); | 
|  |  | 
|  | /* Start erase on unprotected sectors */ | 
|  | for (sect = s_first; sect<=s_last; sect++) { | 
|  | if (info->protect[sect] == 0) {	/* not protected */ | 
|  | addr = info->start[sect]; | 
|  | out8(addr, 0x30); | 
|  | iobarrier_rw(); | 
|  | l_sect = sect; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* re-enable interrupts if necessary */ | 
|  | if (flag) | 
|  | enable_interrupts(); | 
|  |  | 
|  | /* wait at least 80us - let's wait 1 ms */ | 
|  | udelay (1000); | 
|  |  | 
|  | /* | 
|  | * We wait for the last triggered sector | 
|  | */ | 
|  | if (l_sect < 0) | 
|  | goto DONE; | 
|  |  | 
|  | start = get_timer (0); | 
|  | last  = start; | 
|  | addr = info->start[l_sect]; | 
|  |  | 
|  | DEBUGF ("Start erase timeout: %d\n", CONFIG_SYS_FLASH_ERASE_TOUT); | 
|  |  | 
|  | while ((in8(addr) & 0x80) != 0x80) { | 
|  | if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { | 
|  | printf ("Timeout\n"); | 
|  | flash_reset (info->start[0]); | 
|  | flash_to_mem(); | 
|  | return 1; | 
|  | } | 
|  | /* show that we're waiting */ | 
|  | if ((now - last) > 1000) {	/* every second */ | 
|  | putc ('.'); | 
|  | last = now; | 
|  | } | 
|  | iobarrier_rw(); | 
|  | } | 
|  |  | 
|  | DONE: | 
|  | /* reset to read mode */ | 
|  | flash_reset (info->start[0]); | 
|  | flash_to_mem(); | 
|  |  | 
|  | printf (" done\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Copy memory to flash, returns: | 
|  | * 0 - OK | 
|  | * 1 - write timeout | 
|  | * 2 - Flash not erased | 
|  | */ | 
|  | int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) | 
|  | { | 
|  | ulong cp, wp, data; | 
|  | int i, l, rc; | 
|  | ulong out_cnt = 0; | 
|  |  | 
|  | flash_to_xd(); | 
|  |  | 
|  | wp = (addr & ~3);	/* get lower word aligned address */ | 
|  |  | 
|  | /* | 
|  | * handle unaligned start bytes | 
|  | */ | 
|  | if ((l = addr - wp) != 0) { | 
|  | data = 0; | 
|  | for (i=0, cp=wp; i<l; ++i, ++cp) { | 
|  | data = (data << 8) | (*(uchar *)cp); | 
|  | } | 
|  | for (; i<4 && cnt>0; ++i) { | 
|  | data = (data << 8) | *src++; | 
|  | --cnt; | 
|  | ++cp; | 
|  | } | 
|  | for (; cnt==0 && i<4; ++i, ++cp) { | 
|  | data = (data << 8) | (*(uchar *)cp); | 
|  | } | 
|  |  | 
|  | if ((rc = write_word(info, wp, data)) != 0) { | 
|  | flash_to_mem(); | 
|  | return (rc); | 
|  | } | 
|  | wp += 4; | 
|  | } | 
|  |  | 
|  | putc(219); | 
|  |  | 
|  | /* | 
|  | * handle word aligned part | 
|  | */ | 
|  | while (cnt >= 4) { | 
|  | if (out_cnt>26214) | 
|  | { | 
|  | putc(219); | 
|  | out_cnt = 0; | 
|  | } | 
|  | data = 0; | 
|  | for (i=0; i<4; ++i) { | 
|  | data = (data << 8) | *src++; | 
|  | } | 
|  | if ((rc = write_word(info, wp, data)) != 0) { | 
|  | flash_to_mem(); | 
|  | return (rc); | 
|  | } | 
|  | wp  += 4; | 
|  | cnt -= 4; | 
|  | out_cnt += 4; | 
|  | } | 
|  |  | 
|  | if (cnt == 0) { | 
|  | flash_to_mem(); | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * handle unaligned tail bytes | 
|  | */ | 
|  | data = 0; | 
|  | for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { | 
|  | data = (data << 8) | *src++; | 
|  | --cnt; | 
|  | } | 
|  | for (; i<4; ++i, ++cp) { | 
|  | data = (data << 8) | (*(uchar *)cp); | 
|  | } | 
|  |  | 
|  | flash_to_mem(); | 
|  | return (write_word(info, wp, data)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write a word to Flash, returns: | 
|  | * 0 - OK | 
|  | * 1 - write timeout | 
|  | * 2 - Flash not erased | 
|  | */ | 
|  | static int write_word (flash_info_t *info, ulong dest, ulong data) | 
|  | { | 
|  | volatile ulong addr = info->start[0]; | 
|  | ulong start; | 
|  | int i; | 
|  |  | 
|  | flash_to_xd(); | 
|  |  | 
|  | /* Check if Flash is (sufficiently) erased */ | 
|  | if ((in32(dest) & data) != data) { | 
|  | flash_to_mem(); | 
|  | return (2); | 
|  | } | 
|  |  | 
|  | /* write each byte out */ | 
|  | for (i = 0; i < 4; i++) { | 
|  | char *data_ch = (char *)&data; | 
|  | int flag = disable_interrupts(); | 
|  |  | 
|  | out8(addr + 0x555, 0xAA); | 
|  | iobarrier_rw(); | 
|  | out8(addr + 0x2AA, 0x55); | 
|  | iobarrier_rw(); | 
|  | out8(addr + 0x555, 0xA0); | 
|  | iobarrier_rw(); | 
|  | out8(dest+i, data_ch[i]); | 
|  | iobarrier_rw(); | 
|  |  | 
|  | /* re-enable interrupts if necessary */ | 
|  | if (flag) | 
|  | enable_interrupts(); | 
|  |  | 
|  | /* data polling for D7 */ | 
|  | start = get_timer (0); | 
|  | while ((in8(dest+i) & 0x80) != (data_ch[i] & 0x80)) { | 
|  | if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { | 
|  | flash_reset (addr); | 
|  | flash_to_mem(); | 
|  | return (1); | 
|  | } | 
|  | iobarrier_rw(); | 
|  | } | 
|  | } | 
|  |  | 
|  | flash_reset (addr); | 
|  | flash_to_mem(); | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Reset bank to read mode | 
|  | */ | 
|  | static void flash_reset (ulong addr) | 
|  | { | 
|  | flash_to_xd(); | 
|  | out8(addr, 0xF0);	/* reset bank */ | 
|  | iobarrier_rw(); | 
|  | flash_to_mem(); | 
|  | } | 
|  |  | 
|  | void flash_print_info (flash_info_t *info) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (info->flash_id == FLASH_UNKNOWN) { | 
|  | printf ("missing or unknown FLASH type\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | switch (info->flash_id & FLASH_VENDMASK) { | 
|  | case FLASH_MAN_AMD:	printf ("AMD ");		break; | 
|  | case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break; | 
|  | case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break; | 
|  | case FLASH_MAN_STM:	printf ("SGS THOMSON ");	break; | 
|  | default:		printf ("Unknown Vendor ");	break; | 
|  | } | 
|  |  | 
|  | switch (info->flash_id & FLASH_TYPEMASK) { | 
|  | case FLASH_AM040:	printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n"); | 
|  | break; | 
|  | case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); | 
|  | break; | 
|  | case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n"); | 
|  | break; | 
|  | case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); | 
|  | break; | 
|  | case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n"); | 
|  | break; | 
|  | case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); | 
|  | break; | 
|  | case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n"); | 
|  | break; | 
|  | case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); | 
|  | break; | 
|  | case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n"); | 
|  | break; | 
|  | default:		printf ("Unknown Chip Type\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (info->size % 0x100000 == 0) { | 
|  | printf ("  Size: %ld MB in %d Sectors\n", | 
|  | info->size / 0x100000, info->sector_count); | 
|  | } else if (info->size % 0x400 == 0) { | 
|  | printf ("  Size: %ld KB in %d Sectors\n", | 
|  | info->size / 0x400, info->sector_count); | 
|  | } else { | 
|  | printf ("  Size: %ld B in %d Sectors\n", | 
|  | info->size, info->sector_count); | 
|  | } | 
|  |  | 
|  | printf ("  Sector Start Addresses:"); | 
|  | for (i=0; i<info->sector_count; ++i) { | 
|  | if ((i % 5) == 0) | 
|  | printf ("\n   "); | 
|  | printf (" %08lX%s", | 
|  | info->start[i], | 
|  | info->protect[i] ? " (RO)" : "     " | 
|  | ); | 
|  | } | 
|  | printf ("\n"); | 
|  | } |