Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash
diff --git a/README b/README index de700bd..ca415d3 100644 --- a/README +++ b/README
@@ -3992,15 +3992,15 @@ list, October 2002] -int main (int argc, char *argv[]) +int main(int argc, char *argv[]) { sighandler_t no_more_time; - signal (SIGALRM, no_more_time); - alarm (PROJECT_DEADLINE - toSec (3 * WEEK)); + signal(SIGALRM, no_more_time); + alarm(PROJECT_DEADLINE - toSec (3 * WEEK)); if (available_money > available_manpower) { - pay consultant to port U-Boot; + Pay consultant to port U-Boot; return 0; } @@ -4008,35 +4008,47 @@ Subscribe to u-boot mailing list; - if (clueless) { - email ("Hi, I am new to U-Boot, how do I get started?"); - } + if (clueless) + email("Hi, I am new to U-Boot, how do I get started?"); while (learning) { Read the README file in the top level directory; - Read http://www.denx.de/twiki/bin/view/DULG/Manual ; + Read http://www.denx.de/twiki/bin/view/DULG/Manual; + Read applicable doc/*.README; Read the source, Luke; + /* find . -name "*.[chS]" | xargs grep -i <keyword> */ } - if (available_money > toLocalCurrency ($2500)) { - Buy a BDI2000; - } else { + if (available_money > toLocalCurrency ($2500)) + Buy a BDI3000; + else Add a lot of aggravation and time; + + if (a similar board exists) { /* hopefully... */ + cp -a board/<similar> board/<myboard> + cp include/configs/<similar>.h include/configs/<myboard>.h + } else { + Create your own board support subdirectory; + Create your own board include/configs/<myboard>.h file; } + Edit new board/<myboard> files + Edit new include/configs/<myboard>.h - Create your own board support subdirectory; - - Create your own board config file; - - while (!running) { - do { - Add / modify source code; - } until (compiles); - Debug; - if (clueless) - email ("Hi, I am having problems..."); + while (!accepted) { + while (!running) { + do { + Add / modify source code; + } until (compiles); + Debug; + if (clueless) + email("Hi, I am having problems..."); + } + Send patch file to the U-Boot email list; + if (reasonable critiques) + Incorporate improvements from email list code review; + else + Defend code as written; } - Send patch file to Wolfgang; return 0; }
diff --git a/board/Marvell/db64360/mv_eth.h b/board/Marvell/db64360/mv_eth.h index 943d30b..142910b 100644 --- a/board/Marvell/db64360/mv_eth.h +++ b/board/Marvell/db64360/mv_eth.h
@@ -37,8 +37,7 @@ #include <common.h> #include <net.h> #include "mv_regs.h" -#include "../common/ppc_error_no.h" - +#include <asm/errno.h> /************************************************************************* **************************************************************************
diff --git a/board/Marvell/db64460/mv_eth.h b/board/Marvell/db64460/mv_eth.h index b4e498b..cbe751a 100644 --- a/board/Marvell/db64460/mv_eth.h +++ b/board/Marvell/db64460/mv_eth.h
@@ -37,7 +37,7 @@ #include <common.h> #include <net.h> #include "mv_regs.h" -#include "../common/ppc_error_no.h" +#include <asm/errno.h> /*************************************************************************
diff --git a/board/prodrive/p3mx/mv_eth.h b/board/prodrive/p3mx/mv_eth.h index 334b049..af15274 100644 --- a/board/prodrive/p3mx/mv_eth.h +++ b/board/prodrive/p3mx/mv_eth.h
@@ -37,7 +37,7 @@ #include <common.h> #include <net.h> #include "mv_regs.h" -#include "ppc_error_no.h" +#include <asm/errno.h> #include "../../Marvell/include/core.h" /*************************************************************************
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c index 03b6c86..5c930d3 100644 --- a/cpu/mpc83xx/cpu_init.c +++ b/cpu/mpc83xx/cpu_init.c
@@ -299,6 +299,7 @@ im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR; #endif #ifdef CONFIG_USB_EHCI_FSL +#ifndef CONFIG_MPC834x uint32_t temp; struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR; @@ -311,6 +312,7 @@ udelay(1000); } while (!(temp & PHY_CLK_VALID)); #endif +#endif } int cpu_init_r (void)
diff --git a/include/asm-arm/errno.h b/include/asm-arm/errno.h index 134a8fc..4c82b50 100644 --- a/include/asm-arm/errno.h +++ b/include/asm-arm/errno.h
@@ -1,138 +1 @@ -#ifndef _ARM_ERRNO_H -#define _ARM_ERRNO_H - -#define EPERM 1 /* Operation not permitted */ -#define ENOENT 2 /* No such file or directory */ -#define ESRCH 3 /* No such process */ -#define EINTR 4 /* Interrupted system call */ -#define EIO 5 /* I/O error */ -#define ENXIO 6 /* No such device or address */ -#define E2BIG 7 /* Arg list too long */ -#define ENOEXEC 8 /* Exec format error */ -#define EBADF 9 /* Bad file number */ -#define ECHILD 10 /* No child processes */ -#define EAGAIN 11 /* Try again */ -#define ENOMEM 12 /* Out of memory */ -#define EACCES 13 /* Permission denied */ -#define EFAULT 14 /* Bad address */ -#define ENOTBLK 15 /* Block device required */ -#define EBUSY 16 /* Device or resource busy */ -#define EEXIST 17 /* File exists */ -#define EXDEV 18 /* Cross-device link */ -#define ENODEV 19 /* No such device */ -#define ENOTDIR 20 /* Not a directory */ -#define EISDIR 21 /* Is a directory */ -#define EINVAL 22 /* Invalid argument */ -#define ENFILE 23 /* File table overflow */ -#define EMFILE 24 /* Too many open files */ -#define ENOTTY 25 /* Not a typewriter */ -#define ETXTBSY 26 /* Text file busy */ -#define EFBIG 27 /* File too large */ -#define ENOSPC 28 /* No space left on device */ -#define ESPIPE 29 /* Illegal seek */ -#define EROFS 30 /* Read-only file system */ -#define EMLINK 31 /* Too many links */ -#define EPIPE 32 /* Broken pipe */ -#define EDOM 33 /* Math argument out of domain of func */ -#define ERANGE 34 /* Math result not representable */ -#define EDEADLK 35 /* Resource deadlock would occur */ -#define ENAMETOOLONG 36 /* File name too long */ -#define ENOLCK 37 /* No record locks available */ -#define ENOSYS 38 /* Function not implemented */ -#define ENOTEMPTY 39 /* Directory not empty */ -#define ELOOP 40 /* Too many symbolic links encountered */ -#define EWOULDBLOCK EAGAIN /* Operation would block */ -#define ENOMSG 42 /* No message of desired type */ -#define EIDRM 43 /* Identifier removed */ -#define ECHRNG 44 /* Channel number out of range */ -#define EL2NSYNC 45 /* Level 2 not synchronized */ -#define EL3HLT 46 /* Level 3 halted */ -#define EL3RST 47 /* Level 3 reset */ -#define ELNRNG 48 /* Link number out of range */ -#define EUNATCH 49 /* Protocol driver not attached */ -#define ENOCSI 50 /* No CSI structure available */ -#define EL2HLT 51 /* Level 2 halted */ -#define EBADE 52 /* Invalid exchange */ -#define EBADR 53 /* Invalid request descriptor */ -#define EXFULL 54 /* Exchange full */ -#define ENOANO 55 /* No anode */ -#define EBADRQC 56 /* Invalid request code */ -#define EBADSLT 57 /* Invalid slot */ -#define EDEADLOCK 58 /* File locking deadlock error */ -#define EBFONT 59 /* Bad font file format */ -#define ENOSTR 60 /* Device not a stream */ -#define ENODATA 61 /* No data available */ -#define ETIME 62 /* Timer expired */ -#define ENOSR 63 /* Out of streams resources */ -#define ENONET 64 /* Machine is not on the network */ -#define ENOPKG 65 /* Package not installed */ -#define EREMOTE 66 /* Object is remote */ -#define ENOLINK 67 /* Link has been severed */ -#define EADV 68 /* Advertise error */ -#define ESRMNT 69 /* Srmount error */ -#define ECOMM 70 /* Communication error on send */ -#define EPROTO 71 /* Protocol error */ -#define EMULTIHOP 72 /* Multihop attempted */ -#define EDOTDOT 73 /* RFS specific error */ -#define EBADMSG 74 /* Not a data message */ -#define EOVERFLOW 75 /* Value too large for defined data type */ -#define ENOTUNIQ 76 /* Name not unique on network */ -#define EBADFD 77 /* File descriptor in bad state */ -#define EREMCHG 78 /* Remote address changed */ -#define ELIBACC 79 /* Can not access a needed shared library */ -#define ELIBBAD 80 /* Accessing a corrupted shared library */ -#define ELIBSCN 81 /* .lib section in a.out corrupted */ -#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ -#define ELIBEXEC 83 /* Cannot exec a shared library directly */ -#define EILSEQ 84 /* Illegal byte sequence */ -#define ERESTART 85 /* Interrupted system call should be restarted */ -#define ESTRPIPE 86 /* Streams pipe error */ -#define EUSERS 87 /* Too many users */ -#define ENOTSOCK 88 /* Socket operation on non-socket */ -#define EDESTADDRREQ 89 /* Destination address required */ -#define EMSGSIZE 90 /* Message too long */ -#define EPROTOTYPE 91 /* Protocol wrong type for socket */ -#define ENOPROTOOPT 92 /* Protocol not available */ -#define EPROTONOSUPPORT 93 /* Protocol not supported */ -#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ -#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ -#define EPFNOSUPPORT 96 /* Protocol family not supported */ -#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ -#define EADDRINUSE 98 /* Address already in use */ -#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ -#define ENETDOWN 100 /* Network is down */ -#define ENETUNREACH 101 /* Network is unreachable */ -#define ENETRESET 102 /* Network dropped connection because of reset */ -#define ECONNABORTED 103 /* Software caused connection abort */ -#define ECONNRESET 104 /* Connection reset by peer */ -#define ENOBUFS 105 /* No buffer space available */ -#define EISCONN 106 /* Transport endpoint is already connected */ -#define ENOTCONN 107 /* Transport endpoint is not connected */ -#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ -#define ETOOMANYREFS 109 /* Too many references: cannot splice */ -#define ETIMEDOUT 110 /* Connection timed out */ -#define ECONNREFUSED 111 /* Connection refused */ -#define EHOSTDOWN 112 /* Host is down */ -#define EHOSTUNREACH 113 /* No route to host */ -#define EALREADY 114 /* Operation already in progress */ -#define EINPROGRESS 115 /* Operation now in progress */ -#define ESTALE 116 /* Stale NFS file handle */ -#define EUCLEAN 117 /* Structure needs cleaning */ -#define ENOTNAM 118 /* Not a XENIX named type file */ -#define ENAVAIL 119 /* No XENIX semaphores available */ -#define EISNAM 120 /* Is a named type file */ -#define EREMOTEIO 121 /* Remote I/O error */ -#define EDQUOT 122 /* Quota exceeded */ - -#define ENOMEDIUM 123 /* No medium found */ -#define EMEDIUMTYPE 124 /* Wrong medium type */ - -/* Should never be seen by user programs */ -#define ERESTARTSYS 512 -#define ERESTARTNOINTR 513 -#define ERESTARTNOHAND 514 /* restart if no handler.. */ -#define ENOIOCTLCMD 515 /* No ioctl command */ - -#define _LAST_ERRNO 515 - -#endif +#include <asm-generic/errno.h>
diff --git a/include/asm-avr32/errno.h b/include/asm-avr32/errno.h index ea3506f..4c82b50 100644 --- a/include/asm-avr32/errno.h +++ b/include/asm-avr32/errno.h
@@ -1,132 +1 @@ -#ifndef _ASM_AVR32_ERRNO_H -#define _ASM_AVR32_ERRNO_H - -#define EPERM 1 /* Operation not permitted */ -#define ENOENT 2 /* No such file or directory */ -#define ESRCH 3 /* No such process */ -#define EINTR 4 /* Interrupted system call */ -#define EIO 5 /* I/O error */ -#define ENXIO 6 /* No such device or address */ -#define E2BIG 7 /* Argument list too long */ -#define ENOEXEC 8 /* Exec format error */ -#define EBADF 9 /* Bad file number */ -#define ECHILD 10 /* No child processes */ -#define EAGAIN 11 /* Try again */ -#define ENOMEM 12 /* Out of memory */ -#define EACCES 13 /* Permission denied */ -#define EFAULT 14 /* Bad address */ -#define ENOTBLK 15 /* Block device required */ -#define EBUSY 16 /* Device or resource busy */ -#define EEXIST 17 /* File exists */ -#define EXDEV 18 /* Cross-device link */ -#define ENODEV 19 /* No such device */ -#define ENOTDIR 20 /* Not a directory */ -#define EISDIR 21 /* Is a directory */ -#define EINVAL 22 /* Invalid argument */ -#define ENFILE 23 /* File table overflow */ -#define EMFILE 24 /* Too many open files */ -#define ENOTTY 25 /* Not a typewriter */ -#define ETXTBSY 26 /* Text file busy */ -#define EFBIG 27 /* File too large */ -#define ENOSPC 28 /* No space left on device */ -#define ESPIPE 29 /* Illegal seek */ -#define EROFS 30 /* Read-only file system */ -#define EMLINK 31 /* Too many links */ -#define EPIPE 32 /* Broken pipe */ -#define EDOM 33 /* Math argument out of domain of func */ -#define ERANGE 34 /* Math result not representable */ -#define EDEADLK 35 /* Resource deadlock would occur */ -#define ENAMETOOLONG 36 /* File name too long */ -#define ENOLCK 37 /* No record locks available */ -#define ENOSYS 38 /* Function not implemented */ -#define ENOTEMPTY 39 /* Directory not empty */ -#define ELOOP 40 /* Too many symbolic links encountered */ -#define EWOULDBLOCK EAGAIN /* Operation would block */ -#define ENOMSG 42 /* No message of desired type */ -#define EIDRM 43 /* Identifier removed */ -#define ECHRNG 44 /* Channel number out of range */ -#define EL2NSYNC 45 /* Level 2 not synchronized */ -#define EL3HLT 46 /* Level 3 halted */ -#define EL3RST 47 /* Level 3 reset */ -#define ELNRNG 48 /* Link number out of range */ -#define EUNATCH 49 /* Protocol driver not attached */ -#define ENOCSI 50 /* No CSI structure available */ -#define EL2HLT 51 /* Level 2 halted */ -#define EBADE 52 /* Invalid exchange */ -#define EBADR 53 /* Invalid request descriptor */ -#define EXFULL 54 /* Exchange full */ -#define ENOANO 55 /* No anode */ -#define EBADRQC 56 /* Invalid request code */ -#define EBADSLT 57 /* Invalid slot */ - -#define EDEADLOCK EDEADLK - -#define EBFONT 59 /* Bad font file format */ -#define ENOSTR 60 /* Device not a stream */ -#define ENODATA 61 /* No data available */ -#define ETIME 62 /* Timer expired */ -#define ENOSR 63 /* Out of streams resources */ -#define ENONET 64 /* Machine is not on the network */ -#define ENOPKG 65 /* Package not installed */ -#define EREMOTE 66 /* Object is remote */ -#define ENOLINK 67 /* Link has been severed */ -#define EADV 68 /* Advertise error */ -#define ESRMNT 69 /* Srmount error */ -#define ECOMM 70 /* Communication error on send */ -#define EPROTO 71 /* Protocol error */ -#define EMULTIHOP 72 /* Multihop attempted */ -#define EDOTDOT 73 /* RFS specific error */ -#define EBADMSG 74 /* Not a data message */ -#define EOVERFLOW 75 /* Value too large for defined data type */ -#define ENOTUNIQ 76 /* Name not unique on network */ -#define EBADFD 77 /* File descriptor in bad state */ -#define EREMCHG 78 /* Remote address changed */ -#define ELIBACC 79 /* Can not access a needed shared library */ -#define ELIBBAD 80 /* Accessing a corrupted shared library */ -#define ELIBSCN 81 /* .lib section in a.out corrupted */ -#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ -#define ELIBEXEC 83 /* Cannot exec a shared library directly */ -#define EILSEQ 84 /* Illegal byte sequence */ -#define ERESTART 85 /* Interrupted system call should be restarted */ -#define ESTRPIPE 86 /* Streams pipe error */ -#define EUSERS 87 /* Too many users */ -#define ENOTSOCK 88 /* Socket operation on non-socket */ -#define EDESTADDRREQ 89 /* Destination address required */ -#define EMSGSIZE 90 /* Message too long */ -#define EPROTOTYPE 91 /* Protocol wrong type for socket */ -#define ENOPROTOOPT 92 /* Protocol not available */ -#define EPROTONOSUPPORT 93 /* Protocol not supported */ -#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ -#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ -#define EPFNOSUPPORT 96 /* Protocol family not supported */ -#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ -#define EADDRINUSE 98 /* Address already in use */ -#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ -#define ENETDOWN 100 /* Network is down */ -#define ENETUNREACH 101 /* Network is unreachable */ -#define ENETRESET 102 /* Network dropped connection because of reset */ -#define ECONNABORTED 103 /* Software caused connection abort */ -#define ECONNRESET 104 /* Connection reset by peer */ -#define ENOBUFS 105 /* No buffer space available */ -#define EISCONN 106 /* Transport endpoint is already connected */ -#define ENOTCONN 107 /* Transport endpoint is not connected */ -#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ -#define ETOOMANYREFS 109 /* Too many references: cannot splice */ -#define ETIMEDOUT 110 /* Connection timed out */ -#define ECONNREFUSED 111 /* Connection refused */ -#define EHOSTDOWN 112 /* Host is down */ -#define EHOSTUNREACH 113 /* No route to host */ -#define EALREADY 114 /* Operation already in progress */ -#define EINPROGRESS 115 /* Operation now in progress */ -#define ESTALE 116 /* Stale NFS file handle */ -#define EUCLEAN 117 /* Structure needs cleaning */ -#define ENOTNAM 118 /* Not a XENIX named type file */ -#define ENAVAIL 119 /* No XENIX semaphores available */ -#define EISNAM 120 /* Is a named type file */ -#define EREMOTEIO 121 /* Remote I/O error */ -#define EDQUOT 122 /* Quota exceeded */ - -#define ENOMEDIUM 123 /* No medium found */ -#define EMEDIUMTYPE 124 /* Wrong medium type */ - -#endif /* _ASM_AVR32_ERRNO_H */ +#include <asm-generic/errno.h>
diff --git a/include/asm-blackfin/errno.h b/include/asm-blackfin/errno.h index 0d2c618..4c82b50 100644 --- a/include/asm-blackfin/errno.h +++ b/include/asm-blackfin/errno.h
@@ -1,156 +1 @@ -/* - * U-boot - errno.h Error number defines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _BLACKFIN_ERRNO_H -#define _BLACKFIN_ERRNO_H - -#define EPERM 1 /* Operation not permitted */ -#define ENOENT 2 /* No such file or directory */ -#define ESRCH 3 /* No such process */ -#define EINTR 4 /* Interrupted system call */ -#define EIO 5 /* I/O error */ -#define ENXIO 6 /* No such device or address */ -#define E2BIG 7 /* Arg list too long */ -#define ENOEXEC 8 /* Exec format error */ -#define EBADF 9 /* Bad file number */ -#define ECHILD 10 /* No child processes */ -#define EAGAIN 11 /* Try again */ -#define ENOMEM 12 /* Out of memory */ -#define EACCES 13 /* Permission denied */ -#define EFAULT 14 /* Bad address */ -#define ENOTBLK 15 /* Block device required */ -#define EBUSY 16 /* Device or resource busy */ -#define EEXIST 17 /* File exists */ -#define EXDEV 18 /* Cross-device link */ -#define ENODEV 19 /* No such device */ -#define ENOTDIR 20 /* Not a directory */ -#define EISDIR 21 /* Is a directory */ -#define EINVAL 22 /* Invalid argument */ -#define ENFILE 23 /* File table overflow */ -#define EMFILE 24 /* Too many open files */ -#define ENOTTY 25 /* Not a typewriter */ -#define ETXTBSY 26 /* Text file busy */ -#define EFBIG 27 /* File too large */ -#define ENOSPC 28 /* No space left on device */ -#define ESPIPE 29 /* Illegal seek */ -#define EROFS 30 /* Read-only file system */ -#define EMLINK 31 /* Too many links */ -#define EPIPE 32 /* Broken pipe */ -#define EDOM 33 /* Math argument out of domain of func */ -#define ERANGE 34 /* Math result not representable */ -#define EDEADLK 35 /* Resource deadlock would occur */ -#define ENAMETOOLONG 36 /* File name too long */ -#define ENOLCK 37 /* No record locks available */ -#define ENOSYS 38 /* Function not implemented */ -#define ENOTEMPTY 39 /* Directory not empty */ -#define ELOOP 40 /* Too many symbolic links encountered */ -#define EWOULDBLOCK EAGAIN /* Operation would block */ -#define ENOMSG 42 /* No message of desired type */ -#define EIDRM 43 /* Identifier removed */ -#define ECHRNG 44 /* Channel number out of range */ -#define EL2NSYNC 45 /* Level 2 not synchronized */ -#define EL3HLT 46 /* Level 3 halted */ -#define EL3RST 47 /* Level 3 reset */ -#define ELNRNG 48 /* Link number out of range */ -#define EUNATCH 49 /* Protocol driver not attached */ -#define ENOCSI 50 /* No CSI structure available */ -#define EL2HLT 51 /* Level 2 halted */ -#define EBADE 52 /* Invalid exchange */ -#define EBADR 53 /* Invalid request descriptor */ -#define EXFULL 54 /* Exchange full */ -#define ENOANO 55 /* No anode */ -#define EBADRQC 56 /* Invalid request code */ -#define EBADSLT 57 /* Invalid slot */ - -#define EDEADLOCK EDEADLK - -#define EBFONT 59 /* Bad font file format */ -#define ENOSTR 60 /* Device not a stream */ -#define ENODATA 61 /* No data available */ -#define ETIME 62 /* Timer expired */ -#define ENOSR 63 /* Out of streams resources */ -#define ENONET 64 /* Machine is not on the network */ -#define ENOPKG 65 /* Package not installed */ -#define EREMOTE 66 /* Object is remote */ -#define ENOLINK 67 /* Link has been severed */ -#define EADV 68 /* Advertise error */ -#define ESRMNT 69 /* Srmount error */ -#define ECOMM 70 /* Communication error on send */ -#define EPROTO 71 /* Protocol error */ -#define EMULTIHOP 72 /* Multihop attempted */ -#define EDOTDOT 73 /* RFS specific error */ -#define EBADMSG 74 /* Not a data message */ -#define EOVERFLOW 75 /* Value too large for defined data type */ -#define ENOTUNIQ 76 /* Name not unique on network */ -#define EBADFD 77 /* File descriptor in bad state */ -#define EREMCHG 78 /* Remote address changed */ -#define ELIBACC 79 /* Can not access a needed shared library */ -#define ELIBBAD 80 /* Accessing a corrupted shared library */ -#define ELIBSCN 81 /* .lib section in a.out corrupted */ -#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ -#define ELIBEXEC 83 /* Cannot exec a shared library directly */ -#define EILSEQ 84 /* Illegal byte sequence */ -#define ERESTART 85 /* Interrupted system call should be restarted */ -#define ESTRPIPE 86 /* Streams pipe error */ -#define EUSERS 87 /* Too many users */ -#define ENOTSOCK 88 /* Socket operation on non-socket */ -#define EDESTADDRREQ 89 /* Destination address required */ -#define EMSGSIZE 90 /* Message too long */ -#define EPROTOTYPE 91 /* Protocol wrong type for socket */ -#define ENOPROTOOPT 92 /* Protocol not available */ -#define EPROTONOSUPPORT 93 /* Protocol not supported */ -#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ -#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ -#define EPFNOSUPPORT 96 /* Protocol family not supported */ -#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ -#define EADDRINUSE 98 /* Address already in use */ -#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ -#define ENETDOWN 100 /* Network is down */ -#define ENETUNREACH 101 /* Network is unreachable */ -#define ENETRESET 102 /* Network dropped connection because of reset */ -#define ECONNABORTED 103 /* Software caused connection abort */ -#define ECONNRESET 104 /* Connection reset by peer */ -#define ENOBUFS 105 /* No buffer space available */ -#define EISCONN 106 /* Transport endpoint is already connected */ -#define ENOTCONN 107 /* Transport endpoint is not connected */ -#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ -#define ETOOMANYREFS 109 /* Too many references: cannot splice */ -#define ETIMEDOUT 110 /* Connection timed out */ -#define ECONNREFUSED 111 /* Connection refused */ -#define EHOSTDOWN 112 /* Host is down */ -#define EHOSTUNREACH 113 /* No route to host */ -#define EALREADY 114 /* Operation already in progress */ -#define EINPROGRESS 115 /* Operation now in progress */ -#define ESTALE 116 /* Stale NFS file handle */ -#define EUCLEAN 117 /* Structure needs cleaning */ -#define ENOTNAM 118 /* Not a XENIX named type file */ -#define ENAVAIL 119 /* No XENIX semaphores available */ -#define EISNAM 120 /* Is a named type file */ -#define EREMOTEIO 121 /* Remote I/O error */ -#define EDQUOT 122 /* Quota exceeded */ - -#define ENOMEDIUM 123 /* No medium found */ -#define EMEDIUMTYPE 124 /* Wrong medium type */ - -#endif +#include <asm-generic/errno.h>
diff --git a/board/Marvell/common/ppc_error_no.h b/include/asm-generic/errno.h similarity index 86% rename from board/Marvell/common/ppc_error_no.h rename to include/asm-generic/errno.h index 53687c8..39dc515 100644 --- a/board/Marvell/common/ppc_error_no.h +++ b/include/asm-generic/errno.h
@@ -1,6 +1,7 @@ /* - * (C) Copyright 2003 - * Ingo Assmus <ingo.assmus@keymile.com> + * U-boot - errno.h Error number defines + * + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -17,25 +18,22 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ -/* - * BK Id: SCCS/s.errno.h 1.9 06/05/01 21:45:21 paulus - */ -#ifndef _MV_PPC_ERRNO_H -#define _MV_PPC_ERRNO_H +#ifndef _GENERIC_ERRNO_H +#define _GENERIC_ERRNO_H -#define EPERM 1 /* Operation not permitted */ -#define ENOENT 2 /* No such file or directory */ -#define ESRCH 3 /* No such process */ -#define EINTR 4 /* Interrupted system call */ -#define EIO 5 /* I/O error */ -#define ENXIO 6 /* No such device or address */ -#define E2BIG 7 /* Arg list too long */ -#define ENOEXEC 8 /* Exec format error */ -#define EBADF 9 /* Bad file number */ +#define EPERM 1 /* Operation not permitted */ +#define ENOENT 2 /* No such file or directory */ +#define ESRCH 3 /* No such process */ +#define EINTR 4 /* Interrupted system call */ +#define EIO 5 /* I/O error */ +#define ENXIO 6 /* No such device or address */ +#define E2BIG 7 /* Argument list too long */ +#define ENOEXEC 8 /* Exec format error */ +#define EBADF 9 /* Bad file number */ #define ECHILD 10 /* No child processes */ #define EAGAIN 11 /* Try again */ #define ENOMEM 12 /* Out of memory */ @@ -84,7 +82,9 @@ #define ENOANO 55 /* No anode */ #define EBADRQC 56 /* Invalid request code */ #define EBADSLT 57 /* Invalid slot */ -#define EDEADLOCK 58 /* File locking deadlock error */ + +#define EDEADLOCK EDEADLK + #define EBFONT 59 /* Bad font file format */ #define ENOSTR 60 /* Device not a stream */ #define ENODATA 61 /* No data available */ @@ -149,16 +149,7 @@ #define EISNAM 120 /* Is a named type file */ #define EREMOTEIO 121 /* Remote I/O error */ #define EDQUOT 122 /* Quota exceeded */ - #define ENOMEDIUM 123 /* No medium found */ #define EMEDIUMTYPE 124 /* Wrong medium type */ -/* Should never be seen by user programs */ -#define ERESTARTSYS 512 -#define ERESTARTNOINTR 513 -#define ERESTARTNOHAND 514 /* restart if no handler.. */ -#define ENOIOCTLCMD 515 /* No ioctl command */ - -#define _LAST_ERRNO 515 - #endif
diff --git a/include/asm-m68k/errno.h b/include/asm-m68k/errno.h index ff364b8..4c82b50 100644 --- a/include/asm-m68k/errno.h +++ b/include/asm-m68k/errno.h
@@ -1,138 +1 @@ -#ifndef _PPC_ERRNO_H -#define _PPC_ERRNO_H - -#define EPERM 1 /* Operation not permitted */ -#define ENOENT 2 /* No such file or directory */ -#define ESRCH 3 /* No such process */ -#define EINTR 4 /* Interrupted system call */ -#define EIO 5 /* I/O error */ -#define ENXIO 6 /* No such device or address */ -#define E2BIG 7 /* Arg list too long */ -#define ENOEXEC 8 /* Exec format error */ -#define EBADF 9 /* Bad file number */ -#define ECHILD 10 /* No child processes */ -#define EAGAIN 11 /* Try again */ -#define ENOMEM 12 /* Out of memory */ -#define EACCES 13 /* Permission denied */ -#define EFAULT 14 /* Bad address */ -#define ENOTBLK 15 /* Block device required */ -#define EBUSY 16 /* Device or resource busy */ -#define EEXIST 17 /* File exists */ -#define EXDEV 18 /* Cross-device link */ -#define ENODEV 19 /* No such device */ -#define ENOTDIR 20 /* Not a directory */ -#define EISDIR 21 /* Is a directory */ -#define EINVAL 22 /* Invalid argument */ -#define ENFILE 23 /* File table overflow */ -#define EMFILE 24 /* Too many open files */ -#define ENOTTY 25 /* Not a typewriter */ -#define ETXTBSY 26 /* Text file busy */ -#define EFBIG 27 /* File too large */ -#define ENOSPC 28 /* No space left on device */ -#define ESPIPE 29 /* Illegal seek */ -#define EROFS 30 /* Read-only file system */ -#define EMLINK 31 /* Too many links */ -#define EPIPE 32 /* Broken pipe */ -#define EDOM 33 /* Math argument out of domain of func */ -#define ERANGE 34 /* Math result not representable */ -#define EDEADLK 35 /* Resource deadlock would occur */ -#define ENAMETOOLONG 36 /* File name too long */ -#define ENOLCK 37 /* No record locks available */ -#define ENOSYS 38 /* Function not implemented */ -#define ENOTEMPTY 39 /* Directory not empty */ -#define ELOOP 40 /* Too many symbolic links encountered */ -#define EWOULDBLOCK EAGAIN /* Operation would block */ -#define ENOMSG 42 /* No message of desired type */ -#define EIDRM 43 /* Identifier removed */ -#define ECHRNG 44 /* Channel number out of range */ -#define EL2NSYNC 45 /* Level 2 not synchronized */ -#define EL3HLT 46 /* Level 3 halted */ -#define EL3RST 47 /* Level 3 reset */ -#define ELNRNG 48 /* Link number out of range */ -#define EUNATCH 49 /* Protocol driver not attached */ -#define ENOCSI 50 /* No CSI structure available */ -#define EL2HLT 51 /* Level 2 halted */ -#define EBADE 52 /* Invalid exchange */ -#define EBADR 53 /* Invalid request descriptor */ -#define EXFULL 54 /* Exchange full */ -#define ENOANO 55 /* No anode */ -#define EBADRQC 56 /* Invalid request code */ -#define EBADSLT 57 /* Invalid slot */ -#define EDEADLOCK 58 /* File locking deadlock error */ -#define EBFONT 59 /* Bad font file format */ -#define ENOSTR 60 /* Device not a stream */ -#define ENODATA 61 /* No data available */ -#define ETIME 62 /* Timer expired */ -#define ENOSR 63 /* Out of streams resources */ -#define ENONET 64 /* Machine is not on the network */ -#define ENOPKG 65 /* Package not installed */ -#define EREMOTE 66 /* Object is remote */ -#define ENOLINK 67 /* Link has been severed */ -#define EADV 68 /* Advertise error */ -#define ESRMNT 69 /* Srmount error */ -#define ECOMM 70 /* Communication error on send */ -#define EPROTO 71 /* Protocol error */ -#define EMULTIHOP 72 /* Multihop attempted */ -#define EDOTDOT 73 /* RFS specific error */ -#define EBADMSG 74 /* Not a data message */ -#define EOVERFLOW 75 /* Value too large for defined data type */ -#define ENOTUNIQ 76 /* Name not unique on network */ -#define EBADFD 77 /* File descriptor in bad state */ -#define EREMCHG 78 /* Remote address changed */ -#define ELIBACC 79 /* Can not access a needed shared library */ -#define ELIBBAD 80 /* Accessing a corrupted shared library */ -#define ELIBSCN 81 /* .lib section in a.out corrupted */ -#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ -#define ELIBEXEC 83 /* Cannot exec a shared library directly */ -#define EILSEQ 84 /* Illegal byte sequence */ -#define ERESTART 85 /* Interrupted system call should be restarted */ -#define ESTRPIPE 86 /* Streams pipe error */ -#define EUSERS 87 /* Too many users */ -#define ENOTSOCK 88 /* Socket operation on non-socket */ -#define EDESTADDRREQ 89 /* Destination address required */ -#define EMSGSIZE 90 /* Message too long */ -#define EPROTOTYPE 91 /* Protocol wrong type for socket */ -#define ENOPROTOOPT 92 /* Protocol not available */ -#define EPROTONOSUPPORT 93 /* Protocol not supported */ -#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ -#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ -#define EPFNOSUPPORT 96 /* Protocol family not supported */ -#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ -#define EADDRINUSE 98 /* Address already in use */ -#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ -#define ENETDOWN 100 /* Network is down */ -#define ENETUNREACH 101 /* Network is unreachable */ -#define ENETRESET 102 /* Network dropped connection because of reset */ -#define ECONNABORTED 103 /* Software caused connection abort */ -#define ECONNRESET 104 /* Connection reset by peer */ -#define ENOBUFS 105 /* No buffer space available */ -#define EISCONN 106 /* Transport endpoint is already connected */ -#define ENOTCONN 107 /* Transport endpoint is not connected */ -#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ -#define ETOOMANYREFS 109 /* Too many references: cannot splice */ -#define ETIMEDOUT 110 /* Connection timed out */ -#define ECONNREFUSED 111 /* Connection refused */ -#define EHOSTDOWN 112 /* Host is down */ -#define EHOSTUNREACH 113 /* No route to host */ -#define EALREADY 114 /* Operation already in progress */ -#define EINPROGRESS 115 /* Operation now in progress */ -#define ESTALE 116 /* Stale NFS file handle */ -#define EUCLEAN 117 /* Structure needs cleaning */ -#define ENOTNAM 118 /* Not a XENIX named type file */ -#define ENAVAIL 119 /* No XENIX semaphores available */ -#define EISNAM 120 /* Is a named type file */ -#define EREMOTEIO 121 /* Remote I/O error */ -#define EDQUOT 122 /* Quota exceeded */ - -#define ENOMEDIUM 123 /* No medium found */ -#define EMEDIUMTYPE 124 /* Wrong medium type */ - -/* Should never be seen by user programs */ -#define ERESTARTSYS 512 -#define ERESTARTNOINTR 513 -#define ERESTARTNOHAND 514 /* restart if no handler.. */ -#define ENOIOCTLCMD 515 /* No ioctl command */ - -#define _LAST_ERRNO 515 - -#endif +#include <asm-generic/errno.h>
diff --git a/include/asm-microblaze/errno.h b/include/asm-microblaze/errno.h new file mode 100644 index 0000000..4c82b50 --- /dev/null +++ b/include/asm-microblaze/errno.h
@@ -0,0 +1 @@ +#include <asm-generic/errno.h>
diff --git a/include/asm-ppc/errno.h b/include/asm-ppc/errno.h index ff364b8..4c82b50 100644 --- a/include/asm-ppc/errno.h +++ b/include/asm-ppc/errno.h
@@ -1,138 +1 @@ -#ifndef _PPC_ERRNO_H -#define _PPC_ERRNO_H - -#define EPERM 1 /* Operation not permitted */ -#define ENOENT 2 /* No such file or directory */ -#define ESRCH 3 /* No such process */ -#define EINTR 4 /* Interrupted system call */ -#define EIO 5 /* I/O error */ -#define ENXIO 6 /* No such device or address */ -#define E2BIG 7 /* Arg list too long */ -#define ENOEXEC 8 /* Exec format error */ -#define EBADF 9 /* Bad file number */ -#define ECHILD 10 /* No child processes */ -#define EAGAIN 11 /* Try again */ -#define ENOMEM 12 /* Out of memory */ -#define EACCES 13 /* Permission denied */ -#define EFAULT 14 /* Bad address */ -#define ENOTBLK 15 /* Block device required */ -#define EBUSY 16 /* Device or resource busy */ -#define EEXIST 17 /* File exists */ -#define EXDEV 18 /* Cross-device link */ -#define ENODEV 19 /* No such device */ -#define ENOTDIR 20 /* Not a directory */ -#define EISDIR 21 /* Is a directory */ -#define EINVAL 22 /* Invalid argument */ -#define ENFILE 23 /* File table overflow */ -#define EMFILE 24 /* Too many open files */ -#define ENOTTY 25 /* Not a typewriter */ -#define ETXTBSY 26 /* Text file busy */ -#define EFBIG 27 /* File too large */ -#define ENOSPC 28 /* No space left on device */ -#define ESPIPE 29 /* Illegal seek */ -#define EROFS 30 /* Read-only file system */ -#define EMLINK 31 /* Too many links */ -#define EPIPE 32 /* Broken pipe */ -#define EDOM 33 /* Math argument out of domain of func */ -#define ERANGE 34 /* Math result not representable */ -#define EDEADLK 35 /* Resource deadlock would occur */ -#define ENAMETOOLONG 36 /* File name too long */ -#define ENOLCK 37 /* No record locks available */ -#define ENOSYS 38 /* Function not implemented */ -#define ENOTEMPTY 39 /* Directory not empty */ -#define ELOOP 40 /* Too many symbolic links encountered */ -#define EWOULDBLOCK EAGAIN /* Operation would block */ -#define ENOMSG 42 /* No message of desired type */ -#define EIDRM 43 /* Identifier removed */ -#define ECHRNG 44 /* Channel number out of range */ -#define EL2NSYNC 45 /* Level 2 not synchronized */ -#define EL3HLT 46 /* Level 3 halted */ -#define EL3RST 47 /* Level 3 reset */ -#define ELNRNG 48 /* Link number out of range */ -#define EUNATCH 49 /* Protocol driver not attached */ -#define ENOCSI 50 /* No CSI structure available */ -#define EL2HLT 51 /* Level 2 halted */ -#define EBADE 52 /* Invalid exchange */ -#define EBADR 53 /* Invalid request descriptor */ -#define EXFULL 54 /* Exchange full */ -#define ENOANO 55 /* No anode */ -#define EBADRQC 56 /* Invalid request code */ -#define EBADSLT 57 /* Invalid slot */ -#define EDEADLOCK 58 /* File locking deadlock error */ -#define EBFONT 59 /* Bad font file format */ -#define ENOSTR 60 /* Device not a stream */ -#define ENODATA 61 /* No data available */ -#define ETIME 62 /* Timer expired */ -#define ENOSR 63 /* Out of streams resources */ -#define ENONET 64 /* Machine is not on the network */ -#define ENOPKG 65 /* Package not installed */ -#define EREMOTE 66 /* Object is remote */ -#define ENOLINK 67 /* Link has been severed */ -#define EADV 68 /* Advertise error */ -#define ESRMNT 69 /* Srmount error */ -#define ECOMM 70 /* Communication error on send */ -#define EPROTO 71 /* Protocol error */ -#define EMULTIHOP 72 /* Multihop attempted */ -#define EDOTDOT 73 /* RFS specific error */ -#define EBADMSG 74 /* Not a data message */ -#define EOVERFLOW 75 /* Value too large for defined data type */ -#define ENOTUNIQ 76 /* Name not unique on network */ -#define EBADFD 77 /* File descriptor in bad state */ -#define EREMCHG 78 /* Remote address changed */ -#define ELIBACC 79 /* Can not access a needed shared library */ -#define ELIBBAD 80 /* Accessing a corrupted shared library */ -#define ELIBSCN 81 /* .lib section in a.out corrupted */ -#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ -#define ELIBEXEC 83 /* Cannot exec a shared library directly */ -#define EILSEQ 84 /* Illegal byte sequence */ -#define ERESTART 85 /* Interrupted system call should be restarted */ -#define ESTRPIPE 86 /* Streams pipe error */ -#define EUSERS 87 /* Too many users */ -#define ENOTSOCK 88 /* Socket operation on non-socket */ -#define EDESTADDRREQ 89 /* Destination address required */ -#define EMSGSIZE 90 /* Message too long */ -#define EPROTOTYPE 91 /* Protocol wrong type for socket */ -#define ENOPROTOOPT 92 /* Protocol not available */ -#define EPROTONOSUPPORT 93 /* Protocol not supported */ -#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ -#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ -#define EPFNOSUPPORT 96 /* Protocol family not supported */ -#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ -#define EADDRINUSE 98 /* Address already in use */ -#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ -#define ENETDOWN 100 /* Network is down */ -#define ENETUNREACH 101 /* Network is unreachable */ -#define ENETRESET 102 /* Network dropped connection because of reset */ -#define ECONNABORTED 103 /* Software caused connection abort */ -#define ECONNRESET 104 /* Connection reset by peer */ -#define ENOBUFS 105 /* No buffer space available */ -#define EISCONN 106 /* Transport endpoint is already connected */ -#define ENOTCONN 107 /* Transport endpoint is not connected */ -#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ -#define ETOOMANYREFS 109 /* Too many references: cannot splice */ -#define ETIMEDOUT 110 /* Connection timed out */ -#define ECONNREFUSED 111 /* Connection refused */ -#define EHOSTDOWN 112 /* Host is down */ -#define EHOSTUNREACH 113 /* No route to host */ -#define EALREADY 114 /* Operation already in progress */ -#define EINPROGRESS 115 /* Operation now in progress */ -#define ESTALE 116 /* Stale NFS file handle */ -#define EUCLEAN 117 /* Structure needs cleaning */ -#define ENOTNAM 118 /* Not a XENIX named type file */ -#define ENAVAIL 119 /* No XENIX semaphores available */ -#define EISNAM 120 /* Is a named type file */ -#define EREMOTEIO 121 /* Remote I/O error */ -#define EDQUOT 122 /* Quota exceeded */ - -#define ENOMEDIUM 123 /* No medium found */ -#define EMEDIUMTYPE 124 /* Wrong medium type */ - -/* Should never be seen by user programs */ -#define ERESTARTSYS 512 -#define ERESTARTNOINTR 513 -#define ERESTARTNOHAND 514 /* restart if no handler.. */ -#define ENOIOCTLCMD 515 /* No ioctl command */ - -#define _LAST_ERRNO 515 - -#endif +#include <asm-generic/errno.h>
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h index 7c6a151..c60a7d2 100644 --- a/include/asm-ppc/immap_83xx.h +++ b/include/asm-ppc/immap_83xx.h
@@ -650,6 +650,12 @@ u8 res7[0xC0000]; } immap_t; +#ifdef CONFIG_HAS_FSL_MPH_USB +#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x22000 /* use the MPH controller */ +#else +#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x23000 /* use the DR controller */ +#endif + #elif defined(CONFIG_MPC8313) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ @@ -856,7 +862,10 @@ #define CONFIG_SYS_MPC83xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DMA_OFFSET) #define CONFIG_SYS_MPC83xx_ESDHC_OFFSET (0x2e000) #define CONFIG_SYS_MPC83xx_ESDHC_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_ESDHC_OFFSET) -#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x23000 + +#ifndef CONFIG_SYS_MPC83xx_USB_OFFSET +#define CONFIG_SYS_MPC83xx_USB_OFFSET 0x23000 +#endif #define CONFIG_SYS_MPC83xx_USB_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB_OFFSET) #endif /* __IMMAP_83xx__ */
diff --git a/include/asm-sh/errno.h b/include/asm-sh/errno.h index 0d2c618..4c82b50 100644 --- a/include/asm-sh/errno.h +++ b/include/asm-sh/errno.h
@@ -1,156 +1 @@ -/* - * U-boot - errno.h Error number defines - * - * Copyright (c) 2005-2007 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _BLACKFIN_ERRNO_H -#define _BLACKFIN_ERRNO_H - -#define EPERM 1 /* Operation not permitted */ -#define ENOENT 2 /* No such file or directory */ -#define ESRCH 3 /* No such process */ -#define EINTR 4 /* Interrupted system call */ -#define EIO 5 /* I/O error */ -#define ENXIO 6 /* No such device or address */ -#define E2BIG 7 /* Arg list too long */ -#define ENOEXEC 8 /* Exec format error */ -#define EBADF 9 /* Bad file number */ -#define ECHILD 10 /* No child processes */ -#define EAGAIN 11 /* Try again */ -#define ENOMEM 12 /* Out of memory */ -#define EACCES 13 /* Permission denied */ -#define EFAULT 14 /* Bad address */ -#define ENOTBLK 15 /* Block device required */ -#define EBUSY 16 /* Device or resource busy */ -#define EEXIST 17 /* File exists */ -#define EXDEV 18 /* Cross-device link */ -#define ENODEV 19 /* No such device */ -#define ENOTDIR 20 /* Not a directory */ -#define EISDIR 21 /* Is a directory */ -#define EINVAL 22 /* Invalid argument */ -#define ENFILE 23 /* File table overflow */ -#define EMFILE 24 /* Too many open files */ -#define ENOTTY 25 /* Not a typewriter */ -#define ETXTBSY 26 /* Text file busy */ -#define EFBIG 27 /* File too large */ -#define ENOSPC 28 /* No space left on device */ -#define ESPIPE 29 /* Illegal seek */ -#define EROFS 30 /* Read-only file system */ -#define EMLINK 31 /* Too many links */ -#define EPIPE 32 /* Broken pipe */ -#define EDOM 33 /* Math argument out of domain of func */ -#define ERANGE 34 /* Math result not representable */ -#define EDEADLK 35 /* Resource deadlock would occur */ -#define ENAMETOOLONG 36 /* File name too long */ -#define ENOLCK 37 /* No record locks available */ -#define ENOSYS 38 /* Function not implemented */ -#define ENOTEMPTY 39 /* Directory not empty */ -#define ELOOP 40 /* Too many symbolic links encountered */ -#define EWOULDBLOCK EAGAIN /* Operation would block */ -#define ENOMSG 42 /* No message of desired type */ -#define EIDRM 43 /* Identifier removed */ -#define ECHRNG 44 /* Channel number out of range */ -#define EL2NSYNC 45 /* Level 2 not synchronized */ -#define EL3HLT 46 /* Level 3 halted */ -#define EL3RST 47 /* Level 3 reset */ -#define ELNRNG 48 /* Link number out of range */ -#define EUNATCH 49 /* Protocol driver not attached */ -#define ENOCSI 50 /* No CSI structure available */ -#define EL2HLT 51 /* Level 2 halted */ -#define EBADE 52 /* Invalid exchange */ -#define EBADR 53 /* Invalid request descriptor */ -#define EXFULL 54 /* Exchange full */ -#define ENOANO 55 /* No anode */ -#define EBADRQC 56 /* Invalid request code */ -#define EBADSLT 57 /* Invalid slot */ - -#define EDEADLOCK EDEADLK - -#define EBFONT 59 /* Bad font file format */ -#define ENOSTR 60 /* Device not a stream */ -#define ENODATA 61 /* No data available */ -#define ETIME 62 /* Timer expired */ -#define ENOSR 63 /* Out of streams resources */ -#define ENONET 64 /* Machine is not on the network */ -#define ENOPKG 65 /* Package not installed */ -#define EREMOTE 66 /* Object is remote */ -#define ENOLINK 67 /* Link has been severed */ -#define EADV 68 /* Advertise error */ -#define ESRMNT 69 /* Srmount error */ -#define ECOMM 70 /* Communication error on send */ -#define EPROTO 71 /* Protocol error */ -#define EMULTIHOP 72 /* Multihop attempted */ -#define EDOTDOT 73 /* RFS specific error */ -#define EBADMSG 74 /* Not a data message */ -#define EOVERFLOW 75 /* Value too large for defined data type */ -#define ENOTUNIQ 76 /* Name not unique on network */ -#define EBADFD 77 /* File descriptor in bad state */ -#define EREMCHG 78 /* Remote address changed */ -#define ELIBACC 79 /* Can not access a needed shared library */ -#define ELIBBAD 80 /* Accessing a corrupted shared library */ -#define ELIBSCN 81 /* .lib section in a.out corrupted */ -#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ -#define ELIBEXEC 83 /* Cannot exec a shared library directly */ -#define EILSEQ 84 /* Illegal byte sequence */ -#define ERESTART 85 /* Interrupted system call should be restarted */ -#define ESTRPIPE 86 /* Streams pipe error */ -#define EUSERS 87 /* Too many users */ -#define ENOTSOCK 88 /* Socket operation on non-socket */ -#define EDESTADDRREQ 89 /* Destination address required */ -#define EMSGSIZE 90 /* Message too long */ -#define EPROTOTYPE 91 /* Protocol wrong type for socket */ -#define ENOPROTOOPT 92 /* Protocol not available */ -#define EPROTONOSUPPORT 93 /* Protocol not supported */ -#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ -#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ -#define EPFNOSUPPORT 96 /* Protocol family not supported */ -#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ -#define EADDRINUSE 98 /* Address already in use */ -#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ -#define ENETDOWN 100 /* Network is down */ -#define ENETUNREACH 101 /* Network is unreachable */ -#define ENETRESET 102 /* Network dropped connection because of reset */ -#define ECONNABORTED 103 /* Software caused connection abort */ -#define ECONNRESET 104 /* Connection reset by peer */ -#define ENOBUFS 105 /* No buffer space available */ -#define EISCONN 106 /* Transport endpoint is already connected */ -#define ENOTCONN 107 /* Transport endpoint is not connected */ -#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ -#define ETOOMANYREFS 109 /* Too many references: cannot splice */ -#define ETIMEDOUT 110 /* Connection timed out */ -#define ECONNREFUSED 111 /* Connection refused */ -#define EHOSTDOWN 112 /* Host is down */ -#define EHOSTUNREACH 113 /* No route to host */ -#define EALREADY 114 /* Operation already in progress */ -#define EINPROGRESS 115 /* Operation now in progress */ -#define ESTALE 116 /* Stale NFS file handle */ -#define EUCLEAN 117 /* Structure needs cleaning */ -#define ENOTNAM 118 /* Not a XENIX named type file */ -#define ENAVAIL 119 /* No XENIX semaphores available */ -#define EISNAM 120 /* Is a named type file */ -#define EREMOTEIO 121 /* Remote I/O error */ -#define EDQUOT 122 /* Quota exceeded */ - -#define ENOMEDIUM 123 /* No medium found */ -#define EMEDIUMTYPE 124 /* Wrong medium type */ - -#endif +#include <asm-generic/errno.h>
diff --git a/include/asm-sparc/errno.h b/include/asm-sparc/errno.h index 3a74f6f..4c82b50 100644 --- a/include/asm-sparc/errno.h +++ b/include/asm-sparc/errno.h
@@ -1,162 +1 @@ -/* SPARC errno definitions, taken from asm-ppc/errno.h - * - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __SPARC_ERRNO_H__ -#define __SPARC_ERRNO_H__ - -#define EPERM 1 /* Operation not permitted */ -#define ENOENT 2 /* No such file or directory */ -#define ESRCH 3 /* No such process */ -#define EINTR 4 /* Interrupted system call */ -#define EIO 5 /* I/O error */ -#define ENXIO 6 /* No such device or address */ -#define E2BIG 7 /* Arg list too long */ -#define ENOEXEC 8 /* Exec format error */ -#define EBADF 9 /* Bad file number */ -#define ECHILD 10 /* No child processes */ -#define EAGAIN 11 /* Try again */ -#define ENOMEM 12 /* Out of memory */ -#define EACCES 13 /* Permission denied */ -#define EFAULT 14 /* Bad address */ -#define ENOTBLK 15 /* Block device required */ -#define EBUSY 16 /* Device or resource busy */ -#define EEXIST 17 /* File exists */ -#define EXDEV 18 /* Cross-device link */ -#define ENODEV 19 /* No such device */ -#define ENOTDIR 20 /* Not a directory */ -#define EISDIR 21 /* Is a directory */ -#define EINVAL 22 /* Invalid argument */ -#define ENFILE 23 /* File table overflow */ -#define EMFILE 24 /* Too many open files */ -#define ENOTTY 25 /* Not a typewriter */ -#define ETXTBSY 26 /* Text file busy */ -#define EFBIG 27 /* File too large */ -#define ENOSPC 28 /* No space left on device */ -#define ESPIPE 29 /* Illegal seek */ -#define EROFS 30 /* Read-only file system */ -#define EMLINK 31 /* Too many links */ -#define EPIPE 32 /* Broken pipe */ -#define EDOM 33 /* Math argument out of domain of func */ -#define ERANGE 34 /* Math result not representable */ -#define EDEADLK 35 /* Resource deadlock would occur */ -#define ENAMETOOLONG 36 /* File name too long */ -#define ENOLCK 37 /* No record locks available */ -#define ENOSYS 38 /* Function not implemented */ -#define ENOTEMPTY 39 /* Directory not empty */ -#define ELOOP 40 /* Too many symbolic links encountered */ -#define EWOULDBLOCK EAGAIN /* Operation would block */ -#define ENOMSG 42 /* No message of desired type */ -#define EIDRM 43 /* Identifier removed */ -#define ECHRNG 44 /* Channel number out of range */ -#define EL2NSYNC 45 /* Level 2 not synchronized */ -#define EL3HLT 46 /* Level 3 halted */ -#define EL3RST 47 /* Level 3 reset */ -#define ELNRNG 48 /* Link number out of range */ -#define EUNATCH 49 /* Protocol driver not attached */ -#define ENOCSI 50 /* No CSI structure available */ -#define EL2HLT 51 /* Level 2 halted */ -#define EBADE 52 /* Invalid exchange */ -#define EBADR 53 /* Invalid request descriptor */ -#define EXFULL 54 /* Exchange full */ -#define ENOANO 55 /* No anode */ -#define EBADRQC 56 /* Invalid request code */ -#define EBADSLT 57 /* Invalid slot */ -#define EDEADLOCK 58 /* File locking deadlock error */ -#define EBFONT 59 /* Bad font file format */ -#define ENOSTR 60 /* Device not a stream */ -#define ENODATA 61 /* No data available */ -#define ETIME 62 /* Timer expired */ -#define ENOSR 63 /* Out of streams resources */ -#define ENONET 64 /* Machine is not on the network */ -#define ENOPKG 65 /* Package not installed */ -#define EREMOTE 66 /* Object is remote */ -#define ENOLINK 67 /* Link has been severed */ -#define EADV 68 /* Advertise error */ -#define ESRMNT 69 /* Srmount error */ -#define ECOMM 70 /* Communication error on send */ -#define EPROTO 71 /* Protocol error */ -#define EMULTIHOP 72 /* Multihop attempted */ -#define EDOTDOT 73 /* RFS specific error */ -#define EBADMSG 74 /* Not a data message */ -#define EOVERFLOW 75 /* Value too large for defined data type */ -#define ENOTUNIQ 76 /* Name not unique on network */ -#define EBADFD 77 /* File descriptor in bad state */ -#define EREMCHG 78 /* Remote address changed */ -#define ELIBACC 79 /* Can not access a needed shared library */ -#define ELIBBAD 80 /* Accessing a corrupted shared library */ -#define ELIBSCN 81 /* .lib section in a.out corrupted */ -#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ -#define ELIBEXEC 83 /* Cannot exec a shared library directly */ -#define EILSEQ 84 /* Illegal byte sequence */ -#define ERESTART 85 /* Interrupted system call should be restarted */ -#define ESTRPIPE 86 /* Streams pipe error */ -#define EUSERS 87 /* Too many users */ -#define ENOTSOCK 88 /* Socket operation on non-socket */ -#define EDESTADDRREQ 89 /* Destination address required */ -#define EMSGSIZE 90 /* Message too long */ -#define EPROTOTYPE 91 /* Protocol wrong type for socket */ -#define ENOPROTOOPT 92 /* Protocol not available */ -#define EPROTONOSUPPORT 93 /* Protocol not supported */ -#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ -#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ -#define EPFNOSUPPORT 96 /* Protocol family not supported */ -#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ -#define EADDRINUSE 98 /* Address already in use */ -#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ -#define ENETDOWN 100 /* Network is down */ -#define ENETUNREACH 101 /* Network is unreachable */ -#define ENETRESET 102 /* Network dropped connection because of reset */ -#define ECONNABORTED 103 /* Software caused connection abort */ -#define ECONNRESET 104 /* Connection reset by peer */ -#define ENOBUFS 105 /* No buffer space available */ -#define EISCONN 106 /* Transport endpoint is already connected */ -#define ENOTCONN 107 /* Transport endpoint is not connected */ -#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ -#define ETOOMANYREFS 109 /* Too many references: cannot splice */ -#define ETIMEDOUT 110 /* Connection timed out */ -#define ECONNREFUSED 111 /* Connection refused */ -#define EHOSTDOWN 112 /* Host is down */ -#define EHOSTUNREACH 113 /* No route to host */ -#define EALREADY 114 /* Operation already in progress */ -#define EINPROGRESS 115 /* Operation now in progress */ -#define ESTALE 116 /* Stale NFS file handle */ -#define EUCLEAN 117 /* Structure needs cleaning */ -#define ENOTNAM 118 /* Not a XENIX named type file */ -#define ENAVAIL 119 /* No XENIX semaphores available */ -#define EISNAM 120 /* Is a named type file */ -#define EREMOTEIO 121 /* Remote I/O error */ -#define EDQUOT 122 /* Quota exceeded */ - -#define ENOMEDIUM 123 /* No medium found */ -#define EMEDIUMTYPE 124 /* Wrong medium type */ - -/* Should never be seen by user programs */ -#define ERESTARTSYS 512 -#define ERESTARTNOINTR 513 -#define ERESTARTNOHAND 514 /* restart if no handler.. */ -#define ENOIOCTLCMD 515 /* No ioctl command */ - -#define _LAST_ERRNO 515 - -#endif +#include <asm-generic/errno.h>
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 2308568..049c80d 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h
@@ -211,7 +211,7 @@ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ /* @@ -236,6 +236,7 @@ #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index e03a107..4cf48f7 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h
@@ -226,6 +226,7 @@ #define CONFIG_MTD_NAND_VERIFY_WRITE 1 #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_BR1_PRELIM ( CONFIG_SYS_NAND_BASE \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 24f37e7..b5820ce 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h
@@ -156,7 +156,7 @@ #endif /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /*
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 669577e..c4acc05 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h
@@ -144,7 +144,7 @@ #endif /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /*
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index ea5fbff..63c6dbc 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h
@@ -201,7 +201,7 @@ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /*
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index d4d3256..068df57 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h
@@ -79,6 +79,7 @@ #define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */ #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ #define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */ +#define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */ #endif #define CONFIG_PCI @@ -155,6 +156,25 @@ #endif +#ifdef CONFIG_SYS_USB_HOST +/* + * Support USB + */ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL + +/* Current USB implementation supports the only USB controller, + * so we have to choose between the MPH or the DR ones */ +#if 1 +#define CONFIG_HAS_FSL_MPH_USB +#else +#define CONFIG_HAS_FSL_DR_USB +#endif + +#endif + /* * DDR Setup */ @@ -288,7 +308,7 @@ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /* @@ -456,9 +476,11 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_SDRAM -#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) +#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ + || defined(CONFIG_USB_STORAGE) #define CONFIG_DOS_PARTITION #define CONFIG_CMD_FAT + #define CONFIG_SUPPORT_VFAT #endif #ifdef CONFIG_COMPACT_FLASH @@ -467,6 +489,9 @@ #ifdef CONFIG_SATA_SIL3114 #define CONFIG_CMD_SATA +#endif + +#if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE) #define CONFIG_CMD_EXT2 #endif @@ -560,12 +585,14 @@ #define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ #define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ #define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ +#define CONFIG_SYS_SCCR_USBMPHCM 3 /* USB MPH controller's clock */ +#define CONFIG_SYS_SCCR_USBDRCM 0 /* USB DR controller's clock */ /* * System IO Config */ #define CONFIG_SYS_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */ -#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) +#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) /* USB DR as device + USB MPH as host */ #define CONFIG_SYS_HID0_INIT 0x000000000 #define CONFIG_SYS_HID0_FINAL CONFIG_SYS_HID0_INIT
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 3497ba0..60c9968 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h
@@ -170,7 +170,7 @@ #endif /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /*
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index f584435..4fcca09 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h
@@ -212,6 +212,7 @@ #define CONFIG_NAND_FSL_UPM 1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE #define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001b /* Access window size 4K */
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 2b7d629..0205c99 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h
@@ -228,7 +228,7 @@ #undef CONFIG_SYS_RAMBOOT #endif -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ /*
diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index 72fe115..08b401e 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h
@@ -131,6 +131,7 @@ #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index 19da133..41dbd0d 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h
@@ -157,7 +157,7 @@ #undef CONFIG_SYS_RAMBOOT #endif -#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 256 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /*