| /* |
| * (C) Copyright 2000-2004 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * David Updegraff, Cray, Inc. dave@cray.com: our 405 is walnut-lite.. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| /* |
| * board/config.h - configuration options, board specific |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #define CONFIG_CRAYL1 |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| |
| #define CONFIG_405GP 1 /* This is a PPC405 CPU */ |
| #define CONFIG_4xx 1 /* ...member of PPC405 family */ |
| #define CONFIG_SYS_CLK_FREQ 25000000 |
| #define CONFIG_BAUDRATE 9600 |
| #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ |
| |
| #define CONFIG_PPC4xx_EMAC |
| #define CONFIG_MII 1 /* MII PHY management */ |
| #define CONFIG_PHY_ADDR 1 /* PHY address; handling of ENET */ |
| #define CONFIG_BOARD_EARLY_INIT_F 1 /* early setup for 405gp */ |
| #define CONFIG_MISC_INIT_R 1 /* so that a misc_init_r() is called */ |
| #define CONFIG_NET_MULTI |
| |
| /* set PRAM to keep U-Boot out, mem= to keep linux out, and initrd_hi to |
| * keep possible initrd ramdisk decompression out. This is in k (1024 bytes) |
| #define CONFIG_PRAM 16 |
| */ |
| #define CONFIG_LOADADDR 0x100000 /* where TFTP images go */ |
| #undef CONFIG_BOOTARGS |
| |
| /* Bootcmd is overridden by the bootscript in board/cray/L1 |
| */ |
| #define CONFIG_SYS_AUTOLOAD "no" |
| #define CONFIG_BOOTCOMMAND "dhcp" |
| |
| /* |
| * ..during experiments.. |
| #define CONFIG_SERVERIP 10.0.0.1 |
| #define CONFIG_ETHADDR 00:40:a6:80:14:5 |
| */ |
| #define CONFIG_HARD_I2C 1 /* hardware support for i2c */ |
| #define CONFIG_SDRAM_BANK0 1 |
| #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ |
| #define CONFIG_SYS_I2C_SLAVE 0x7F |
| #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| #define CONFIG_IDENT_STRING "Cray L1" |
| #define CONFIG_ENV_OVERWRITE 1 |
| #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ |
| #define CONFIG_SYS_HUSH_PARSER 1 |
| #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
| #define CONFIG_SOURCE 1 |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| |
| #define CONFIG_CMD_ASKENV |
| #define CONFIG_CMD_BDI |
| #define CONFIG_CMD_CONSOLE |
| #define CONFIG_CMD_DATE |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_DIAG |
| #define CONFIG_CMD_ECHO |
| #define CONFIG_CMD_EEPROM |
| #define CONFIG_CMD_FLASH |
| #define CONFIG_CMD_I2C |
| #define CONFIG_CMD_IMI |
| #define CONFIG_CMD_IMMAP |
| #define CONFIG_CMD_MEMORY |
| #define CONFIG_CMD_NET |
| #define CONFIG_CMD_REGINFO |
| #define CONFIG_CMD_RUN |
| #define CONFIG_CMD_SAVEENV |
| #define CONFIG_CMD_SETGETDCR |
| #define CONFIG_CMD_SOURCE |
| |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_SUBNETMASK |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_VENDOREX |
| #define CONFIG_BOOTP_DNS |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| |
| |
| /* |
| * how many time to fail & restart a net-TFTP before giving up & resetting |
| * the board hoping that a reset of net interface might help.. |
| */ |
| #define CONFIG_NET_RESET 5 |
| |
| /* |
| * bauds. Just to make it compile; in our case, I read the base_baud |
| * from the DCR anyway, so its kinda-tied to the above ref. clock which in turn |
| * drives the system clock. |
| */ |
| #define CONFIG_SYS_BASE_BAUD 403225 |
| #define CONFIG_SYS_BAUDRATE_TABLE \ |
| {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x100000 /* where to load what we get from TFTP */ |
| #define CONFIG_SYS_TFTP_LOADADDR CONFIG_SYS_LOAD_ADDR |
| #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ |
| #define CONFIG_SYS_DRAM_TEST 1 |
| |
| /*----------------------------------------------------------------------- |
| * Start addresses for the final memory configuration |
| * (Set up by the startup code) |
| * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 |
| */ |
| #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
| #define CONFIG_SYS_FLASH_BASE 0xFFC00000 |
| #define CONFIG_SYS_MONITOR_BASE TEXT_BASE |
| |
| |
| #define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */ |
| |
| /* |
| * For booting Linux, the board info and command line data |
| * have to be in the first 8 MB of memory, since this is |
| * the maximum mapped by the Linux kernel during initialization. |
| */ |
| #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
| /*----------------------------------------------------------------------- |
| * FLASH organization |
| */ |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ |
| #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ |
| #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ |
| |
| /* BEG ENVIRONNEMENT FLASH: needs to be a whole FlashSector */ |
| #define CONFIG_ENV_OFFSET 0x3c8000 |
| #define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ |
| #define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment area */ |
| #define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */ |
| |
| /* Memory tests: U-BOOT relocates itself to the top of Ram, so its at |
| * 32meg-(128k+some_malloc_space+copy-of-ENV sector).. |
| */ |
| #define CONFIG_SYS_SDRAM_SIZE 32 /* megs of ram */ |
| #define CONFIG_SYS_MEMTEST_START 0x2000 /* memtest works from the end of */ |
| /* the exception vector table */ |
| /* to the end of the DRAM */ |
| /* less monitor and malloc area */ |
| #define CONFIG_SYS_STACK_USAGE 0x10000 /* Reserve 64k for the stack usage */ |
| #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* 128k for malloc space */ |
| #define CONFIG_SYS_MEM_END_USAGE ( CONFIG_SYS_MONITOR_LEN \ |
| + CONFIG_SYS_MALLOC_LEN \ |
| + CONFIG_ENV_SECT_SIZE \ |
| + CONFIG_SYS_STACK_USAGE ) |
| |
| #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 - CONFIG_SYS_MEM_END_USAGE) |
| /* END ENVIRONNEMENT FLASH */ |
| |
| /* |
| * Init Memory Controller: |
| * |
| * BR0/1 and OR0/1 (FLASH) |
| */ |
| |
| #define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */ |
| |
| |
| /*----------------------------------------------------------------------- |
| * Definitions for initial stack pointer and data area (in OnChipMem ) |
| */ |
| #if 1 |
| /* On Chip Memory location */ |
| #define CONFIG_SYS_TEMP_STACK_OCM 1 |
| #define CONFIG_SYS_OCM_DATA_ADDR 0xF0000000 |
| #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 |
| |
| #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ |
| #define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ |
| #define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
| #else |
| #define CONFIG_SYS_OCM_DATA_ADDR 0xF0000000 |
| #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 |
| #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of On Chip SRAM */ |
| #define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of On Chip SRAM */ |
| #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| * Definitions for Serial Presence Detect EEPROM address |
| */ |
| #define EEPROM_WRITE_ADDRESS 0xA0 |
| #define EEPROM_READ_ADDRESS 0xA1 |
| |
| /* |
| * Internal Definitions |
| * |
| * Boot Flags |
| */ |
| #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ |
| #define BOOTFLAG_WARM 0x02 /* Software reboot */ |
| |
| #endif /* __CONFIG_H */ |
