doc/README.JFFS2_NAND - u-boot - Git at Google

 JFFS2 NAND support:

 To enable, use the following #define in the board configuration file:

 #define CONFIG_JFFS2_NAND

 Configuration of partitions is similar to how this is done in  U-Boot
 for  JFFS2  on top NOR flash.
	JFFS2 NAND support:

	To enable, use the following #define in the board configuration file:

	#define CONFIG_JFFS2_NAND

	Configuration of partitions is similar to how this is done in U-Boot
	for JFFS2 on top NOR flash.