arch/arm/cpu/armv8/gxb/sdio.c

/*
 * arch/arm/cpu/armv8/gxb/sdio.c
 *
 * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
*/

#include <config.h>
#include <asm/arch/io.h>
#include <asm/arch/cpu_sdio.h>
#include <asm/arch/secure_apb.h>

void  cpu_sd_emmc_pwr_prepare(unsigned port)
{
//    switch(port)
//    {
//        case SDIO_PORT_A:
//            clrbits_le32(P_PREG_PAD_GPIO4_EN_N,0x30f);
//            clrbits_le32(P_PREG_PAD_GPIO4_O   ,0x30f);
//            clrbits_le32(P_PERIPHS_PIN_MUX_8,0x3f);
//            break;
//        case SDIO_PORT_B:
//            clrbits_le32(P_PREG_PAD_GPIO5_EN_N,0x3f<<23);
//            clrbits_le32(P_PREG_PAD_GPIO5_O   ,0x3f<<23);
//            clrbits_le32(P_PERIPHS_PIN_MUX_2,0x3f<<10);
//            break;
//        case SDIO_PORT_C:
//            //clrbits_le32(P_PREG_PAD_GPIO3_EN_N,0xc0f);
//            //clrbits_le32(P_PREG_PAD_GPIO3_O   ,0xc0f);
//            //clrbits_le32(P_PERIPHS_PIN_MUX_6,(0x3f<<24));break;
//            break;
//    }

    /**
        do nothing here
    */
}
unsigned sd_debug_board_1bit_flag = 0;
int cpu_sd_emmc_init(unsigned port)
{

    //printf("inand sdio  port:%d\n",port);
    switch (port)
    {
        case SDIO_PORT_A:
			setbits_le32(P_PERIPHS_PIN_MUX_8,0x3f);
			break;

        case SDIO_PORT_B:
			if (sd_debug_board_1bit_flag == 1)
                setbits_le32(P_PERIPHS_PIN_MUX_2,(0x3<<10)|(0x1<<15));
            else
                setbits_le32(P_PERIPHS_PIN_MUX_2,0x3f<<10);
			break;
        case SDIO_PORT_C://SDIOC GPIOB_2~GPIOB_7
			clrbits_le32(P_PERIPHS_PIN_MUX_2,(0x1f<<22));
			setbits_le32(P_PERIPHS_PIN_MUX_4,(0x3<<18)|(3<<30));
            //printf("inand sdio  port:%d\n",port);
            break;
        default:
            return -1;
    }
    return 0;
}