blob: 57dae4b0f0a11d1039fed67a88d890c4e8ec2302 [file] [log] [blame]
/*
* arch/arm/include/asm/arch-gxtvbb/i2c.h
*
* Copyright (C) 2015 Amlogic, Inc. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#ifndef __AML_MACH_I2C__
#define __AML_MACH_I2C__
#include <asm/io.h>
#include <asm/arch/secure_apb.h>
/**
* struct i2c_msg - an I2C transaction segment beginning with START
* @addr: Slave address, either seven or ten bits. When this is a ten
* bit address, I2C_M_TEN must be set in @flags and the adapter
* must support I2C_FUNC_10BIT_ADDR.
* @flags: I2C_M_RD is handled by all adapters. No other flags may be
* provided unless the adapter exported the relevant I2C_FUNC_*
* flags through i2c_check_functionality().
* @len: Number of data bytes in @buf being read from or written to the
* I2C slave address. For read transactions where I2C_M_RECV_LEN
* is set, the caller guarantees that this buffer can hold up to
* 32 bytes in addition to the initial length byte sent by the
* slave (plus, if used, the SMBus PEC); and this value will be
* incremented by the number of block data bytes received.
* @buf: The buffer into which data is read, or from which it's written.
*
* An i2c_msg is the low level representation of one segment of an I2C
* transaction. It is visible to drivers in the @i2c_transfer() procedure,
* to userspace from i2c-dev, and to I2C adapter drivers through the
* @i2c_adapter.@master_xfer() method.
*
* Except when I2C "protocol mangling" is used, all I2C adapters implement
* the standard rules for I2C transactions. Each transaction begins with a
* START. That is followed by the slave address, and a bit encoding read
* versus write. Then follow all the data bytes, possibly including a byte
* with SMBus PEC. The transfer terminates with a NAK, or when all those
* bytes have been transferred and ACKed. If this is the last message in a
* group, it is followed by a STOP. Otherwise it is followed by the next
* @i2c_msg transaction segment, beginning with a (repeated) START.
*
* Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then
* passing certain @flags may have changed those standard protocol behaviors.
* Those flags are only for use with broken/nonconforming slaves, and with
* adapters which are known to support the specific mangling options they
* need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR).
*/
struct i2c_msg {
__u16 addr; /* slave address */
__u16 flags;
#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */
#define I2C_M_RD 0x0001 /* read data, from slave to master */
#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_PROTOCOL_MANGLING */
#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */
#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */
#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */
#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */
__u16 len; /* msg length */
__u8 *buf; /* pointer to msg data */
};
#define MESON_I2C_MASTER_AO_START (AO_I2C_M_0_CONTROL_REG)
//#define MESON_I2C_MASTER_AO_END (0xc810051c+5)
#define MESON_I2C_MASTER_A_START CBUS_REG_ADDR(I2C_M_0_CONTROL_REG)
#define MESON_I2C_MASTER_A_END (CBUS_REG_ADDR(I2C_M_0_RDATA_REG1+1)-1)
#define MESON_I2C_MASTER_B_START CBUS_REG_ADDR(I2C_M_1_CONTROL_REG)
#define MESON_I2C_MASTER_B_END (CBUS_REG_ADDR(I2C_M_1_RDATA_REG1+1)-1)
#define MESON_I2C_MASTER_C_START CBUS_REG_ADDR(I2C_M_2_CONTROL_REG)
#define MESON_I2C_MASTER_C_END (CBUS_REG_ADDR(I2C_M_2_RDATA_REG1+1)-1)
#define MESON_I2C_MASTER_D_START CBUS_REG_ADDR(I2C_M_3_CONTROL_REG)
#define MESON_I2C_MASTER_D_END (CBUS_REG_ADDR(I2C_M_3_RDATA_REG1+1)-1)
#define MESON_I2C_SLAVE_START CBUS_REG_ADDR(I2C_S_CONTROL_REG)
#define MESON_I2C_SLAVE_END (CBUS_REG_ADDR(I2C_S_CNTL1_REG+1)-1)
#define AML_I2C_MASTER_AO 0
#define AML_I2C_MASTER_A 1
#define AML_I2C_MASTER_B 2
#define AML_I2C_MASTER_C 3
#define AML_I2C_MASTER_D 4
#define AML_I2C_SLAVE_ADDR 0x6c
/*M1 i2c pinmux
* I/O I2C_MASTER_A I2C_MASTER_B I2C_SLAVE
* GPIO_JTAG_TMS SCK_A REG1[12] SCK_A REG1[13]
* GPIO_JTAG_TDI SDA_A REG1[12] SDA_A REG1[13]
* GPIO_JTAG_TCK SCK_B REG1[16] SCK_A REG1[17]
* GPIO_JTAG_TDO SDA_B REG1[20] SDA_A REG1[21]
* GPIOB_0 SCK_B REG2[5] SCK_A REG2[6]
* GPIOB_1 SDA_B REG2[2] SDA_A REG2[3]
* GPIOB_2 SCK_A REGS[13] SCK_A REG2[14]
* GPIOB_3 SDA_A REG2[9] SDA_A REG2[10]
* GPIOC_13 SCK_B REG3[28] SCK_A REG3[29]
* GPIOC_14 SDA_B REG3[25] SDA_A REG3[26]
* GPIOC_21 SCK_A REG7[9] SCK_A REG7[10]
* GPIOC_22 SDA_A REG7[6] SDA_A REG7[7]
* GPIOE_16 SCK_B REG5[27] SCK_A REG5[28]
* GPIOE_17 SDA_B REG5[25] SDA_A REG5[26]
*/
/*i2c master a*/
#define MESON_I2C_MASTER_A_GPIOZ_6_REG (PERIPHS_PIN_MUX_2)
#define MESON_I2C_MASTER_A_GPIOZ_6_BIT (1<<24)
#define MESON_I2C_MASTER_A_GPIOZ_7_REG (PERIPHS_PIN_MUX_2)
#define MESON_I2C_MASTER_A_GPIOZ_7_BIT (1<<28)
/*i2c master b*/
#define MESON_I2C_MASTER_B_GPIOX_16_REG (PERIPHS_PIN_MUX_6)
#define MESON_I2C_MASTER_B_GPIOX_16_BIT (1<<0)
#define MESON_I2C_MASTER_B_GPIOX_17_REG (PERIPHS_PIN_MUX_6)
#define MESON_I2C_MASTER_B_GPIOX_17_BIT (1<<4)
#define MESON_I2C_MASTER_B_GPIOZ_8_REG (PERIPHS_PIN_MUX_3)
#define MESON_I2C_MASTER_B_GPIOZ_8_BIT (1<<0)
#define MESON_I2C_MASTER_B_GPIOZ_9_REG (PERIPHS_PIN_MUX_3)
#define MESON_I2C_MASTER_B_GPIOZ_9_BIT (1<<4)
/*i2c master c*/
#define MESON_I2C_MASTER_C_GPIOA_17_REG (PERIPHS_PIN_MUX_D)
#define MESON_I2C_MASTER_C_GPIOA_17_BIT (3<<4)
#define MESON_I2C_MASTER_C_GPIOA_18_REG (PERIPHS_PIN_MUX_D)
#define MESON_I2C_MASTER_C_GPIOA_18_BIT (3<<8)
#define MESON_I2C_MASTER_C_GPIOX_18_REG (PERIPHS_PIN_MUX_6)
#define MESON_I2C_MASTER_C_GPIOX_18_BIT (1<<8)
#define MESON_I2C_MASTER_C_GPIOX_19_REG (PERIPHS_PIN_MUX_6)
#define MESON_I2C_MASTER_C_GPIOX_19_BIT (1<<12)
/*i2c master d*/
#define MESON_I2C_MASTER_D_GPIOA_6_REG (PERIPHS_PIN_MUX_B)
#define MESON_I2C_MASTER_D_GPIOA_6_BIT (4<<24)
#define MESON_I2C_MASTER_D_GPIOA_7_REG (PERIPHS_PIN_MUX_B)
#define MESON_I2C_MASTER_D_GPIOA_7_BIT (4<<28)
#define MESON_I2C_MASTER_D_GPIOA_12_REG (PERIPHS_PIN_MUX_C)
#define MESON_I2C_MASTER_D_GPIOA_12_BIT (4<<16)
#define MESON_I2C_MASTER_D_GPIOA_13_REG (PERIPHS_PIN_MUX_C)
#define MESON_I2C_MASTER_D_GPIOA_13_BIT (4<<20)
#define MESON_I2C_MASTER_D_GPIOA_19_REG (PERIPHS_PIN_MUX_D)
#define MESON_I2C_MASTER_D_GPIOA_19_BIT (4<<12)
#define MESON_I2C_MASTER_D_GPIOA_20_REG (PERIPHS_PIN_MUX_D)
#define MESON_I2C_MASTER_D_GPIOA_20_BIT (4<<16)
/*i2c master AO*/
#define MESON_I2C_MASTER_AO_GPIOAO_4_REG (P_AO_RTI_PINMUX_REG0)
#define MESON_I2C_MASTER_AO_GPIOAO_4_BIT (2<<16)
#define MESON_I2C_MASTER_AO_GPIOAO_5_REG (P_AO_RTI_PINMUX_REG0)
#define MESON_I2C_MASTER_AO_GPIOAO_5_BIT (2<<20)
#define MESON_I2C_MASTER_AO_GPIOAO_8_REG (P_AO_RTI_PINMUX_REG1)
#define MESON_I2C_MASTER_AO_GPIOAO_8_BIT (2<<0)
#define MESON_I2C_MASTER_AO_GPIOAO_9_REG (P_AO_RTI_PINMUX_REG1)
#define MESON_I2C_MASTER_AO_GPIOAO_9_BIT (2<<4)
#define MESON_I2C_MASTER_AO_GPIOAO_10_REG (P_AO_RTI_PINMUX_REG1)
#define MESON_I2C_MASTER_AO_GPIOAO_10_BIT (2<<8)
#define MESON_I2C_MASTER_AO_GPIOAO_11_REG (P_AO_RTI_PINMUX_REG1)
#define MESON_I2C_MASTER_AO_GPIOAO_11_BIT (2<<12)
/*i2c slave*/
#define MESON_I2C_SLAVE_JTAG_TMS_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_1)
#define MESON_I2C_SLAVE_JTAG_TMS_BIT (1<<13)
#define MESON_I2C_SLAVE_JTAG_TDI_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_1)
#define MESON_I2C_SLAVE_JTAG_TDI_BIT (1<<13)
#define MESON_I2C_SLAVE_GPIOB_2_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_2)
#define MESON_I2C_SLAVE_GPIOB_2_BIT (1<<14)
#define MESON_I2C_SLAVE_GPIOB_3_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_2)
#define MESON_I2C_SLAVE_GPIOB_3_BIT (1<<10)
#define MESON_I2C_SLAVE_GPIOC_21_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_7)
#define MESON_I2C_SLAVE_GPIOC_21_BIT (1<<10)
#define MESON_I2C_SLAVE_GPIOC_22_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_7)
#define MESON_I2C_SLAVE_GPIOC_22_BIT (1<<7)
#define MESON_I2C_SLAVE_JTAG_TCK_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_1)
#define MESON_I2C_SLAVE_JTAG_TCK_BIT (1<<17)
#define MESON_I2C_SLAVE_JTAG_TDO_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_1)
#define MESON_I2C_SLAVE_JTAG_TDO_BIT (1<<21)
#define MESON_I2C_SLAVE_GPIOB_0_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_2)
#define MESON_I2C_SLAVE_GPIOB_0_BIT (1<<6)
#define MESON_I2C_SLAVE_GPIOB_1_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_2)
#define MESON_I2C_SLAVE_GPIOB_1_BIT (1<<3)
#define MESON_I2C_SLAVE_GPIOC_13_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_3)
#define MESON_I2C_SLAVE_GPIOC_13_BIT (1<<29)
#define MESON_I2C_SLAVE_GPIOC_14_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_3)
#define MESON_I2C_SLAVE_GPIOC_14_BIT (1<<26)
#define MESON_I2C_SLAVE_GPIOC_16_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_5)
#define MESON_I2C_SLAVE_GPIOC_16_BIT (1<<28)
#define MESON_I2C_SLAVE_GPIOC_17_REG CBUS_REG_ADDR(PERIPHS_PIN_MUX_5)
#define MESON_I2C_SLAVE_GPIOC_17_BIT (1<<26)
#define AML_I2C_SPPED_50K 50000
#define AML_I2C_SPPED_100K 100000
#define AML_I2C_SPPED_200K 200000
#define AML_I2C_SPPED_300K 300000
#define AML_I2C_SPPED_400K 400000
struct aml_pinmux_reg_bit {
unsigned long scl_reg;
unsigned long sda_reg;
unsigned int scl_bit;
unsigned int sda_bit;
};
struct aml_i2c_platform{
unsigned int slave_addr;/*7bit addr*/
unsigned int wait_count;/*i2c wait ack timeout =
wait_count * wait_ack_interval */
unsigned int wait_ack_interval;
unsigned int wait_read_interval;
unsigned int wait_xfer_interval;
unsigned int master_no;
unsigned int use_pio;/*0: hardware i2c, 1: manual pio i2c*/
unsigned int master_i2c_speed;
/* only need 1 i2c master to comunicate with several devices,
* should I prepare 2 master interface to use simultaneously?*/
struct resource * resource;
struct aml_pinmux_reg_bit master_ao_pinmux;
struct aml_pinmux_reg_bit master_a_pinmux;
struct aml_pinmux_reg_bit master_b_pinmux;
struct aml_pinmux_reg_bit master_c_pinmux;
struct aml_pinmux_reg_bit master_d_pinmux;
struct aml_pinmux_reg_bit slave_reg_bit;
};
/**************i2c software gpio***************/
#define MESON_I2C_PREG_GPIOC_OE CBUS_REG_ADDR(PREG_FGPIO_EN_N)
#define MESON_I2C_PREG_GPIOC_OUTLVL CBUS_REG_ADDR(PREG_FGPIO_O)
#define MESON_I2C_PREG_GPIOC_INLVL CBUS_REG_ADDR(PREG_FGPIO_I)
#define MESON_I2C_PREG_GPIOE_OE CBUS_REG_ADDR(PREG_HGPIO_EN_N)
#define MESON_I2C_PREG_GPIOE_OUTLVL CBUS_REG_ADDR(PREG_HGPIO_O)
#define MESON_I2C_PREG_GPIOE_INLVL CBUS_REG_ADDR(PREG_HGPIO_I)
#define MESON_I2C_PREG_GPIOA_OE CBUS_REG_ADDR(PREG_EGPIO_EN_N)
#define MESON_I2C_PREG_GPIOA_OUTLVL CBUS_REG_ADDR(PREG_EGPIO_O)
#define MESON_I2C_PREG_GPIOA_INLVL CBUS_REG_ADDR(PREG_EGPIO_I)
struct aml_sw_i2c_pins
{
unsigned int scl_reg_out;
unsigned int scl_reg_in;
unsigned int scl_bit;
unsigned int scl_oe;
unsigned int sda_reg_out;
unsigned int sda_reg_in;
unsigned int sda_bit;
unsigned int sda_oe;
};
struct aml_sw_i2c_platform {
struct aml_sw_i2c_pins sw_pins;
/* local settings */
int udelay; /* half clock cycle time in us,
minimum 2 us for fast-mode I2C,
minimum 5 us for standard-mode I2C and SMBus,
maximum 50 us for SMBus */
int timeout; /* in jiffies */
};
#endif //__AML_MACH_I2C__