| /* | |
| * arch/arm/include/asm/arch-gxb/register.h | |
| * | |
| * Copyright (C) 2015 Amlogic, Inc. All rights reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. | |
| */ | |
| #ifndef __REGISTER_H__ | |
| #define __REGISTER_H__ | |
| #define IO_CBUS_BASE 0xc1100000 | |
| #define IO_AXI_BUS_BASE 0xc1300000 | |
| #define IO_AHB_BUS_BASE 0xc9000000 | |
| #define IO_APB_BUS_BASE 0xc8000000 | |
| #define IO_APB_HDMI_BUS_BASE 0xd0040000 | |
| #define IO_VPU_BUS_BASE 0xd0100000 | |
| #define CBUS_REG_OFFSET(reg) ((reg) << 2) | |
| #define CBUS_REG_ADDR(reg) (IO_CBUS_BASE + CBUS_REG_OFFSET(reg)) | |
| /* secure_apb.h redefined, move to asm/arch/regs.h */ | |
| #if 0 | |
| /* below UART0,UART1,AO_UART is m8 addr,it is placed is for compiling pass */ | |
| /* ------------------------------- | |
| // UART0 | |
| // ---------------------------- */ | |
| #define UART0_WFIFO 0x2130 | |
| #define UART0_RFIFO 0x2131 | |
| #define UART0_CONTROL 0x2132 | |
| #define UART0_STATUS 0x2133 | |
| #define UART0_MISC 0x2134 | |
| #define UART0_REG5 0x2135 | |
| /* ---------------------------- | |
| // UART1 | |
| ----------------------------*/ | |
| #define UART1_WFIFO 0x2137 | |
| #define UART1_RFIFO 0x2138 | |
| #define UART1_CONTROL 0x2139 | |
| #define UART1_STATUS 0x213a | |
| #define UART1_MISC 0x213b | |
| #define UART1_REG5 0x213c | |
| /* ------------------------------------------------------ | |
| The following are handled by $periphs/rtl/periphs_reg.v | |
| ---------------------------------------- */ | |
| #define PREG_CTLREG0_ADDR 0x2000 | |
| #define P_PREG_CTLREG0_ADDR CBUS_REG_ADDR(PREG_CTLREG0_ADDR) | |
| /* ---------------------------- | |
| clock measure (4) | |
| ---------------------------- */ | |
| #define MSR_CLK_DUTY 0x21d6 | |
| #define MSR_CLK_REG0 0x21d7 | |
| #define MSR_CLK_REG1 0x21d8 | |
| #define MSR_CLK_REG2 0x21d9 | |
| #define P_MSR_CLK_DUTY CBUS_REG_ADDR(MSR_CLK_DUTY) | |
| #define P_MSR_CLK_REG0 CBUS_REG_ADDR(MSR_CLK_REG0) | |
| #define P_MSR_CLK_REG1 CBUS_REG_ADDR(MSR_CLK_REG1) | |
| #define P_MSR_CLK_REG2 CBUS_REG_ADDR(MSR_CLK_REG2) | |
| /* -------------------------------- | |
| * AO uart | |
| * -------------------------------*/ | |
| #define IO_AOBUS_BASE 0xc8100000 ///1M | |
| #define AOBUS_REG_OFFSET(reg) ((reg) ) | |
| #define AOBUS_REG_ADDR(reg) (IO_AOBUS_BASE + AOBUS_REG_OFFSET(reg)) | |
| #define AO_UART_WFIFO ((0x01 << 10) | (0x30 << 2)) ///../ucode/c_always_on_pointer.h:89 | |
| #define P_AO_UART_WFIFO AOBUS_REG_ADDR(AO_UART_WFIFO) | |
| #define AO_UART_RFIFO ((0x01 << 10) | (0x31 << 2)) ///../ucode/c_always_on_pointer.h:90 | |
| #define P_AO_UART_RFIFO AOBUS_REG_ADDR(AO_UART_RFIFO) | |
| #define AO_UART_CONTROL ((0x01 << 10) | (0x32 << 2)) ///../ucode/c_always_on_pointer.h:91 | |
| #define P_AO_UART_CONTROL AOBUS_REG_ADDR(AO_UART_CONTROL) | |
| #define AO_UART_STATUS ((0x01 << 10) | (0x33 << 2)) ///../ucode/c_always_on_pointer.h:92 | |
| #define P_AO_UART_STATUS AOBUS_REG_ADDR(AO_UART_STATUS) | |
| #define AO_UART_MISC ((0x01 << 10) | (0x34 << 2)) ///../ucode/c_always_on_pointer.h:93 | |
| #define P_AO_UART_MISC AOBUS_REG_ADDR(AO_UART_MISC) | |
| #define AO_UART_REG5 ((0x01 << 10) | (0x35 << 2)) ///../ucode/c_always_on_pointer.h:94 | |
| #define P_AO_UART_REG5 AOBUS_REG_ADDR(AO_UART_REG5) | |
| #endif | |
| #endif //__REGISTER_H__ |