| /* |
| * AMLOGIC LCD panel driver. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the named License, |
| * or any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <common.h> |
| #include <amlogic/aml_lcd.h> |
| #include <asm/arch/gpio.h> |
| |
| //Rsv_val = 0xffffffff |
| |
| static char lcd_cpu_gpio[LCD_CPU_GPIO_NUM_MAX][LCD_CPU_GPIO_NAME_MAX] = { |
| //"GPIOX_3", |
| //"GPIOX_2", |
| "invalid", /* ending flag */ |
| }; |
| |
| static struct lcd_power_step_s lcd_power_on_step[] = { |
| //{LCD_POWER_TYPE_CPU, 0,1,50,}, /* power on */ |
| {LCD_POWER_TYPE_SIGNAL,0,0,0,}, /* signal */ |
| {LCD_POWER_TYPE_MAX, 0,0,0,}, /* ending flag */ |
| }; |
| static struct lcd_power_step_s lcd_power_off_step[] = { |
| {LCD_POWER_TYPE_SIGNAL,0,0,50,}, /* signal */ |
| //{LCD_POWER_TYPE_CPU, 0,0,100,}, /* power off */ |
| {LCD_POWER_TYPE_MAX, 0,0,0,}, /* ending flag */ |
| }; |
| |
| static char lcd_bl_gpio[BL_GPIO_NUM_MAX][LCD_CPU_GPIO_NAME_MAX] = { |
| //"GPIOAO_4", |
| //"GPIOY_13", |
| "invalid", /* ending flag */ |
| }; |
| |
| struct ext_lcd_config_s ext_lcd_config[LCD_NUM_MAX] = { |
| {/* 1920*1080 */ |
| "lvds_0",LCD_LVDS,8, |
| /* basic timing */ |
| 1920,1080,2200,1125,44,148,0,5,36,0, |
| /* clk_attr */ |
| 0,0,1,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| /* lvds_attr */ |
| 1,1,0,0,0,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| /* power step */ |
| lcd_power_on_step, lcd_power_off_step, |
| /* backlight */ |
| 60,255,10,128,128, |
| BL_CTRL_MAX,0xff,1,0,0,0, |
| BL_PWM_POSITIVE,BL_PWM_B,180,100,25,1,0, |
| Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| 10,10,Rsv_val}, |
| |
| {/* 1366*768 */ |
| "lvds_1",LCD_LVDS,8, |
| /* basic timing */ |
| 1366,768,1560,806,56,64,0,3,28,0, |
| /* clk_attr */ |
| 2,0,1,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| /* lvds_attr */ |
| 1,0,0,0,0,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| /* power step */ |
| lcd_power_on_step, lcd_power_off_step, |
| /* backlight */ |
| 60,255,10,128,128, |
| BL_CTRL_MAX,0,1,0,200,200, |
| BL_PWM_POSITIVE,BL_PWM_B,180,100,25,1,0, |
| Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| 10,10,Rsv_val}, |
| |
| {/* 1920*1080 */ |
| "mlvds_0",LCD_MLVDS,8, |
| /* basic timing */ |
| 1920,1080,2200,1125,44,148,0,5,36,0, |
| /* clk_attr */ |
| 0,0,1,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| /* minilvds_attr */ |
| 6,0x12304567,0x0,0x110,0,0,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| /* power step */ |
| lcd_power_on_step, lcd_power_off_step, |
| /* backlight */ |
| 60,255,10,128,128, |
| BL_CTRL_MAX,0xff,1,0,0,0, |
| BL_PWM_POSITIVE,BL_PWM_B,180,100,25,1,0, |
| Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| 10,10,Rsv_val}, |
| |
| {/* 1366*768 */ |
| "mlvds_1",LCD_MLVDS,8, |
| /* basic timing */ |
| 1366,768,1560,806,56,64,0,3,28,0, |
| /* clk_attr */ |
| 2,0,1,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| /* minilvds_attr */ |
| 6,0x45603012,0x0,0xaa0,0,0,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| /* power step */ |
| lcd_power_on_step, lcd_power_off_step, |
| /* backlight */ |
| 60,255,10,128,128, |
| BL_CTRL_MAX,0,1,0,200,200, |
| BL_PWM_POSITIVE,BL_PWM_B,180,100,25,1,0, |
| Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| 10,10,Rsv_val}, |
| |
| {.panel_type = "invalid"}, |
| }; |
| |
| static struct lcd_pinmux_ctrl_s lcd_pinmux_ctrl[LCD_PINMX_MAX] = { |
| { |
| .name = "lcd_minilvds_pin", //GPIOH_0~15 |
| .pinmux_set = {{4, 0x11111111}, {5, 0x11111111}, {LCD_PINMUX_END, 0x0}}, |
| .pinmux_clr = {{4, 0xffffffff}, {5, 0xffffffff}, {LCD_PINMUX_END, 0x0}}, |
| }, |
| { |
| .name = "invalid", |
| }, |
| }; |
| |
| //**** Special parameters just for lvds ***// |
| static struct lvds_config_s lcd_lvds_config = { |
| .lvds_repack = 1, //0=JEDIA mode, 1=VESA mode |
| .dual_port = 1, //0=single port, 1=double port |
| .pn_swap = 0, //0=normal, 1=swap |
| .port_swap = 0, //0=normal, 1=swap |
| .lane_reverse = 0, //0=normal, 1=swap |
| }; |
| |
| static struct mlvds_config_s lcd_mlvds_config = { |
| .channel_num = 6, |
| .channel_sel0 = 0x45603012, |
| .channel_sel1 = 0x0, |
| .clk_phase = 0x0, |
| .pn_swap = 0, //0=normal, 1=swap |
| .bit_swap = 0, //0=normal, 1=swap |
| }; |
| |
| static struct lcd_power_ctrl_s lcd_power_ctrl = { |
| .power_on_step = { |
| // { |
| // .type = LCD_POWER_TYPE_CPU, |
| // .index = 0, /* point to cpu_gpio[] struct */ |
| // .value = 1, /* 0=output_low, 1=output_high, 2=input */ |
| // .delay = 50, /* unit: ms */ |
| // }, |
| { |
| .type = LCD_POWER_TYPE_SIGNAL, |
| .delay = 0, /* unit: ms */ |
| }, |
| { |
| .type = LCD_POWER_TYPE_MAX, /* ending flag */ |
| }, |
| }, |
| .power_off_step = { |
| { |
| .type = LCD_POWER_TYPE_SIGNAL, |
| .delay = 50, /* unit: ms */ |
| }, |
| // { |
| // .type = LCD_POWER_TYPE_CPU, |
| // .index = 0, /* point to cpu_gpio[] struct */ |
| // .value = 0, /* 0=output_low, 1=output_high, 2=input */ |
| // .delay = 100, /* unit: ms */ |
| // }, |
| { |
| .type = LCD_POWER_TYPE_MAX, /* ending flag */ |
| }, |
| }, |
| }; |
| |
| struct lcd_config_s lcd_config_dft = { |
| .lcd_mode = LCD_MODE_TV, |
| .lcd_key_valid = 0, |
| .lcd_basic = { |
| .model_name = "default", |
| .lcd_type = LCD_TYPE_MAX, //LCD_TTL /LCD_LVDS/LCD_VBYONE |
| .lcd_bits = 8, |
| .h_active = 1920, |
| .v_active = 1080, |
| .h_period = 2200, |
| .v_period = 1125, |
| |
| .screen_width = 16, |
| .screen_height = 9, |
| }, |
| |
| .lcd_timing = { |
| .clk_auto = 1, |
| .lcd_clk = 60, |
| .ss_level = 0, |
| .fr_adjust_type = 0, |
| |
| .hsync_width = 44, |
| .hsync_bp = 148, |
| .hsync_pol = 0, |
| .vsync_width = 5, |
| .vsync_bp = 36, |
| .vsync_pol = 0, |
| }, |
| |
| .lcd_control = { |
| .lvds_config = &lcd_lvds_config, |
| .mlvds_config = &lcd_mlvds_config, |
| }, |
| .lcd_power = &lcd_power_ctrl, |
| |
| .pinctrl_ver = 2, |
| .lcd_pinmux = lcd_pinmux_ctrl, |
| .pinmux_set = {{4, 0x11111111}, {5, 0x11111111}, {LCD_PINMUX_END, 0x0}}, |
| .pinmux_clr = {{4, 0xffffffff}, {5, 0xffffffff}, {LCD_PINMUX_END, 0x0}}, |
| }; |
| |
| #ifdef CONFIG_AML_LCD_EXTERN |
| static char lcd_ext_gpio[LCD_EXTERN_GPIO_NUM_MAX][LCD_EXTERN_GPIO_LEN_MAX] = { |
| "invalid", /* ending flag */ |
| }; |
| |
| static unsigned char init_on_table[LCD_EXTERN_INIT_ON_MAX] = { |
| 0x00, 0x20, 0x01, 0x02, 0x00, 0x40, 0xFF, 0x00, 0x00, |
| 0x00, 0x80, 0x02, 0x00, 0x40, 0x62, 0x51, 0x73, 0x00, |
| 0x00, 0x61, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0xC1, 0x05, 0x0F, 0x00, 0x08, 0x70, 0x00, 0x00, |
| 0x00, 0x13, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x3D, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0xED, 0x0D, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x23, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0A, /* delay 10ms */ |
| 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ending */ |
| }; |
| |
| static unsigned char init_off_table[LCD_EXTERN_INIT_OFF_MAX] = { |
| 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ending */ |
| }; |
| |
| struct lcd_extern_common_s ext_common_dft = { |
| .lcd_ext_key_valid = 0, |
| .lcd_ext_num = 1, |
| .pinmux_set = {{LCD_PINMUX_END, 0x0}}, |
| .pinmux_clr = {{LCD_PINMUX_END, 0x0}}, |
| }; |
| struct lcd_extern_config_s ext_config_dtf[LCD_EXTERN_NUM_MAX] = { |
| { |
| .index = 0, |
| .name = "ext_default", |
| .type = LCD_EXTERN_I2C, /* LCD_EXTERN_I2C, LCD_EXTERN_SPI, LCD_EXTERN_MAX */ |
| .status = 1, /* 0=disable, 1=enable */ |
| .i2c_addr = 0x1c, /* 7bit i2c address */ |
| .i2c_addr2 = 0xff, /* 7bit i2c address, 0xff for none */ |
| .i2c_bus = LCD_EXTERN_I2C_BUS_C, /* LCD_EXTERN_I2C_BUS_AO, LCD_EXTERN_I2C_BUS_A/B/C/D */ |
| .spi_gpio_cs = 0, |
| .spi_gpio_clk = 1, |
| .spi_gpio_data = 2, |
| .spi_clk_freq = 0, /* hz */ |
| .spi_clk_pol = 0, |
| .cmd_size = 9, |
| .table_init_on = init_on_table, |
| .table_init_off = init_off_table, |
| }, |
| { |
| .index = LCD_EXTERN_INDEX_INVALID, |
| }, |
| }; |
| #endif |
| |
| struct bl_config_s bl_config_dft = { |
| .name = "default", |
| .bl_key_valid = 0, |
| |
| .level_default = 100, |
| .level_min = 10, |
| .level_max = 255, |
| .level_mid = 128, |
| .level_mid_mapping = 128, |
| .level = 0, |
| |
| .method = BL_CTRL_MAX, |
| .power_on_delay = 200, |
| .power_off_delay = 200, |
| |
| .en_gpio = 0xff, |
| .en_gpio_on = 1, |
| .en_gpio_off = 0, |
| |
| .bl_pwm = NULL, |
| .bl_pwm_combo0 = NULL, |
| .bl_pwm_combo1 = NULL, |
| .pwm_on_delay = 10, |
| .pwm_off_delay = 10, |
| |
| .pinctrl_ver = 2, |
| .bl_pinmux = NULL, |
| .pinmux_set = {{2, 0x00000040}, {LCD_PINMUX_END, 0x0}}, |
| .pinmux_clr = {{2, 0x000000f0}, {LCD_PINMUX_END, 0x0}}, |
| }; |
| |
| void lcd_config_bsp_init(void) |
| { |
| int i, j; |
| |
| for (i = 0; i < LCD_CPU_GPIO_NUM_MAX; i++) { |
| if (strcmp(lcd_cpu_gpio[i], "invalid") == 0) |
| break; |
| strcpy(lcd_power_ctrl.cpu_gpio[i], lcd_cpu_gpio[i]); |
| } |
| for (j = i; j < LCD_CPU_GPIO_NUM_MAX; j++) |
| strcpy(lcd_power_ctrl.cpu_gpio[j], "invalid"); |
| for (i = 0; i < BL_GPIO_NUM_MAX; i++) { |
| if (strcmp(lcd_bl_gpio[i], "invalid") == 0) |
| break; |
| strcpy(bl_config_dft.gpio_name[i], lcd_bl_gpio[i]); |
| } |
| for (j = i; j < BL_GPIO_NUM_MAX; j++) |
| strcpy(bl_config_dft.gpio_name[j], "invalid"); |
| |
| #ifdef CONFIG_AML_LCD_EXTERN |
| for (i = 0; i < LCD_EXTERN_NUM_MAX; i++) { |
| if (ext_config_dtf[i].index == LCD_EXTERN_INDEX_INVALID) |
| break; |
| } |
| ext_common_dft.lcd_ext_num = i; |
| |
| for (i = 0; i < LCD_EXTERN_GPIO_NUM_MAX; i++) { |
| if (strcmp(lcd_ext_gpio[i], "invalid") == 0) |
| break; |
| strcpy(ext_common_dft.gpio_name[i], lcd_ext_gpio[i]); |
| } |
| for (j = i; j < LCD_EXTERN_GPIO_NUM_MAX; j++) |
| strcpy(ext_common_dft.gpio_name[j], "invalid"); |
| |
| #endif |
| } |