| /* | |
| * Copyright 2013 Freescale Semiconductor, Inc. | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #include <common.h> | |
| #include <ns16550.h> | |
| #include <malloc.h> | |
| #include <mmc.h> | |
| #include <nand.h> | |
| #include <i2c.h> | |
| #include "../common/ngpixis.h" | |
| #include <fsl_esdhc.h> | |
| #include <spi_flash.h> | |
| DECLARE_GLOBAL_DATA_PTR; | |
| static const u32 sysclk_tbl[] = { | |
| 66666000, 7499900, 83332500, 8999900, | |
| 99999000, 11111000, 12499800, 13333200 | |
| }; | |
| phys_size_t get_effective_memsize(void) | |
| { | |
| return CONFIG_SYS_L2_SIZE; | |
| } | |
| void board_init_f(ulong bootflag) | |
| { | |
| int px_spd; | |
| u32 plat_ratio, sys_clk, bus_clk; | |
| ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; | |
| console_init_f(); | |
| /* Set pmuxcr to allow both i2c1 and i2c2 */ | |
| setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000); | |
| setbits_be32(&gur->pmuxcr, | |
| in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA); | |
| #ifdef CONFIG_SPL_SPI_BOOT | |
| /* Enable the SPI */ | |
| clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI); | |
| #endif | |
| /* Read back the register to synchronize the write. */ | |
| in_be32(&gur->pmuxcr); | |
| /* initialize selected port with appropriate baud rate */ | |
| px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD)); | |
| sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK_MASK]; | |
| plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; | |
| bus_clk = sys_clk * plat_ratio / 2; | |
| NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, | |
| bus_clk / 16 / CONFIG_BAUDRATE); | |
| #ifdef CONFIG_SPL_MMC_BOOT | |
| puts("\nSD boot...\n"); | |
| #elif defined(CONFIG_SPL_SPI_BOOT) | |
| puts("\nSPI Flash boot...\n"); | |
| #endif | |
| /* copy code to RAM and jump to it - this should not return */ | |
| /* NOTE - code has to be copied out of NAND buffer before | |
| * other blocks can be read. | |
| */ | |
| relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); | |
| } | |
| void board_init_r(gd_t *gd, ulong dest_addr) | |
| { | |
| /* Pointer is writable since we allocated a register for it */ | |
| gd = (gd_t *)CONFIG_SPL_GD_ADDR; | |
| bd_t *bd; | |
| memset(gd, 0, sizeof(gd_t)); | |
| bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); | |
| memset(bd, 0, sizeof(bd_t)); | |
| gd->bd = bd; | |
| bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR; | |
| bd->bi_memsize = CONFIG_SYS_L2_SIZE; | |
| probecpu(); | |
| get_clocks(); | |
| mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, | |
| CONFIG_SPL_RELOC_MALLOC_SIZE); | |
| #ifndef CONFIG_SPL_NAND_BOOT | |
| env_init(); | |
| #endif | |
| #ifdef CONFIG_SPL_MMC_BOOT | |
| mmc_initialize(bd); | |
| #endif | |
| /* relocate environment function pointers etc. */ | |
| #ifdef CONFIG_SPL_NAND_BOOT | |
| nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, | |
| (uchar *)CONFIG_ENV_ADDR); | |
| gd->env_addr = (ulong)(CONFIG_ENV_ADDR); | |
| gd->env_valid = 1; | |
| #else | |
| env_relocate(); | |
| #endif | |
| #ifdef CONFIG_SYS_I2C | |
| i2c_init_all(); | |
| #else | |
| i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); | |
| #endif | |
| gd->ram_size = initdram(0); | |
| #ifdef CONFIG_SPL_NAND_BOOT | |
| puts("Tertiary program loader running in sram..."); | |
| #else | |
| puts("Second program loader running in sram...\n"); | |
| #endif | |
| #ifdef CONFIG_SPL_MMC_BOOT | |
| mmc_boot(); | |
| #elif defined(CONFIG_SPL_SPI_BOOT) | |
| spi_boot(); | |
| #elif defined(CONFIG_SPL_NAND_BOOT) | |
| nand_boot(); | |
| #endif | |
| } |