| /* |
| * S5PC100 OneNAND driver at U-Boot |
| * |
| * Copyright (C) 2008-2009 Samsung Electronics |
| * Kyungmin Park <kyungmin.park@samsung.com> |
| * |
| * Implementation: |
| * Emulate the pseudo BufferRAM |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <linux/compat.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/onenand.h> |
| #include <linux/mtd/flashchip.h> |
| #include <linux/mtd/samsung_onenand.h> |
| |
| #include <asm/io.h> |
| #include <asm/errno.h> |
| |
| #define ONENAND_ERASE_STATUS 0x00 |
| #define ONENAND_MULTI_ERASE_SET 0x01 |
| #define ONENAND_ERASE_START 0x03 |
| #define ONENAND_UNLOCK_START 0x08 |
| #define ONENAND_UNLOCK_END 0x09 |
| #define ONENAND_LOCK_START 0x0A |
| #define ONENAND_LOCK_END 0x0B |
| #define ONENAND_LOCK_TIGHT_START 0x0C |
| #define ONENAND_LOCK_TIGHT_END 0x0D |
| #define ONENAND_UNLOCK_ALL 0x0E |
| #define ONENAND_OTP_ACCESS 0x12 |
| #define ONENAND_SPARE_ACCESS_ONLY 0x13 |
| #define ONENAND_MAIN_ACCESS_ONLY 0x14 |
| #define ONENAND_ERASE_VERIFY 0x15 |
| #define ONENAND_MAIN_SPARE_ACCESS 0x16 |
| #define ONENAND_PIPELINE_READ 0x4000 |
| |
| #if defined(CONFIG_S5P) |
| #define MAP_00 (0x0 << 26) |
| #define MAP_01 (0x1 << 26) |
| #define MAP_10 (0x2 << 26) |
| #define MAP_11 (0x3 << 26) |
| #endif |
| |
| /* read/write of XIP buffer */ |
| #define CMD_MAP_00(mem_addr) (MAP_00 | ((mem_addr) << 1)) |
| /* read/write to the memory device */ |
| #define CMD_MAP_01(mem_addr) (MAP_01 | (mem_addr)) |
| /* control special functions of the memory device */ |
| #define CMD_MAP_10(mem_addr) (MAP_10 | (mem_addr)) |
| /* direct interface(direct access) with the memory device */ |
| #define CMD_MAP_11(mem_addr) (MAP_11 | ((mem_addr) << 2)) |
| |
| struct s3c_onenand { |
| struct mtd_info *mtd; |
| void __iomem *base; |
| void __iomem *ahb_addr; |
| int bootram_command; |
| void __iomem *page_buf; |
| void __iomem *oob_buf; |
| unsigned int (*mem_addr)(int fba, int fpa, int fsa); |
| struct samsung_onenand *reg; |
| }; |
| |
| static struct s3c_onenand *onenand; |
| |
| static int s3c_read_cmd(unsigned int cmd) |
| { |
| return readl(onenand->ahb_addr + cmd); |
| } |
| |
| static void s3c_write_cmd(int value, unsigned int cmd) |
| { |
| writel(value, onenand->ahb_addr + cmd); |
| } |
| |
| /* |
| * MEM_ADDR |
| * |
| * fba: flash block address |
| * fpa: flash page address |
| * fsa: flash sector address |
| * |
| * return the buffer address on the memory device |
| * It will be combined with CMD_MAP_XX |
| */ |
| #if defined(CONFIG_S5P) |
| static unsigned int s3c_mem_addr(int fba, int fpa, int fsa) |
| { |
| return (fba << 13) | (fpa << 7) | (fsa << 5); |
| } |
| #endif |
| |
| static void s3c_onenand_reset(void) |
| { |
| unsigned long timeout = 0x10000; |
| int stat; |
| |
| writel(ONENAND_MEM_RESET_COLD, &onenand->reg->mem_reset); |
| while (timeout--) { |
| stat = readl(&onenand->reg->int_err_stat); |
| if (stat & RST_CMP) |
| break; |
| } |
| stat = readl(&onenand->reg->int_err_stat); |
| writel(stat, &onenand->reg->int_err_ack); |
| |
| /* Clear interrupt */ |
| writel(0x0, &onenand->reg->int_err_ack); |
| /* Clear the ECC status */ |
| writel(0x0, &onenand->reg->ecc_err_stat); |
| } |
| |
| static unsigned short s3c_onenand_readw(void __iomem *addr) |
| { |
| struct onenand_chip *this = onenand->mtd->priv; |
| int reg = addr - this->base; |
| int word_addr = reg >> 1; |
| int value; |
| |
| /* It's used for probing time */ |
| switch (reg) { |
| case ONENAND_REG_MANUFACTURER_ID: |
| return readl(&onenand->reg->manufact_id); |
| case ONENAND_REG_DEVICE_ID: |
| return readl(&onenand->reg->device_id); |
| case ONENAND_REG_VERSION_ID: |
| return readl(&onenand->reg->flash_ver_id); |
| case ONENAND_REG_DATA_BUFFER_SIZE: |
| return readl(&onenand->reg->data_buf_size); |
| case ONENAND_REG_TECHNOLOGY: |
| return readl(&onenand->reg->tech); |
| case ONENAND_REG_SYS_CFG1: |
| return readl(&onenand->reg->mem_cfg); |
| |
| /* Used at unlock all status */ |
| case ONENAND_REG_CTRL_STATUS: |
| return 0; |
| |
| case ONENAND_REG_WP_STATUS: |
| return ONENAND_WP_US; |
| |
| default: |
| break; |
| } |
| |
| /* BootRAM access control */ |
| if (reg < ONENAND_DATARAM && onenand->bootram_command) { |
| if (word_addr == 0) |
| return readl(&onenand->reg->manufact_id); |
| if (word_addr == 1) |
| return readl(&onenand->reg->device_id); |
| if (word_addr == 2) |
| return readl(&onenand->reg->flash_ver_id); |
| } |
| |
| value = s3c_read_cmd(CMD_MAP_11(word_addr)) & 0xffff; |
| printk(KERN_INFO "s3c_onenand_readw: Illegal access" |
| " at reg 0x%x, value 0x%x\n", word_addr, value); |
| return value; |
| } |
| |
| static void s3c_onenand_writew(unsigned short value, void __iomem *addr) |
| { |
| struct onenand_chip *this = onenand->mtd->priv; |
| int reg = addr - this->base; |
| int word_addr = reg >> 1; |
| |
| /* It's used for probing time */ |
| switch (reg) { |
| case ONENAND_REG_SYS_CFG1: |
| writel(value, &onenand->reg->mem_cfg); |
| return; |
| |
| case ONENAND_REG_START_ADDRESS1: |
| case ONENAND_REG_START_ADDRESS2: |
| return; |
| |
| /* Lock/lock-tight/unlock/unlock_all */ |
| case ONENAND_REG_START_BLOCK_ADDRESS: |
| return; |
| |
| default: |
| break; |
| } |
| |
| /* BootRAM access control */ |
| if (reg < ONENAND_DATARAM) { |
| if (value == ONENAND_CMD_READID) { |
| onenand->bootram_command = 1; |
| return; |
| } |
| if (value == ONENAND_CMD_RESET) { |
| writel(ONENAND_MEM_RESET_COLD, |
| &onenand->reg->mem_reset); |
| onenand->bootram_command = 0; |
| return; |
| } |
| } |
| |
| printk(KERN_INFO "s3c_onenand_writew: Illegal access" |
| " at reg 0x%x, value 0x%x\n", word_addr, value); |
| |
| s3c_write_cmd(value, CMD_MAP_11(word_addr)); |
| } |
| |
| static int s3c_onenand_wait(struct mtd_info *mtd, int state) |
| { |
| unsigned int flags = INT_ACT; |
| unsigned int stat, ecc; |
| unsigned long timeout = 0x100000; |
| |
| switch (state) { |
| case FL_READING: |
| flags |= BLK_RW_CMP | LOAD_CMP; |
| break; |
| case FL_WRITING: |
| flags |= BLK_RW_CMP | PGM_CMP; |
| break; |
| case FL_ERASING: |
| flags |= BLK_RW_CMP | ERS_CMP; |
| break; |
| case FL_LOCKING: |
| flags |= BLK_RW_CMP; |
| break; |
| default: |
| break; |
| } |
| |
| while (timeout--) { |
| stat = readl(&onenand->reg->int_err_stat); |
| if (stat & flags) |
| break; |
| } |
| |
| /* To get correct interrupt status in timeout case */ |
| stat = readl(&onenand->reg->int_err_stat); |
| writel(stat, &onenand->reg->int_err_ack); |
| |
| /* |
| * In the Spec. it checks the controller status first |
| * However if you get the correct information in case of |
| * power off recovery (POR) test, it should read ECC status first |
| */ |
| if (stat & LOAD_CMP) { |
| ecc = readl(&onenand->reg->ecc_err_stat); |
| if (ecc & ONENAND_ECC_4BIT_UNCORRECTABLE) { |
| printk(KERN_INFO "%s: ECC error = 0x%04x\n", |
| __func__, ecc); |
| mtd->ecc_stats.failed++; |
| return -EBADMSG; |
| } |
| } |
| |
| if (stat & (LOCKED_BLK | ERS_FAIL | PGM_FAIL | LD_FAIL_ECC_ERR)) { |
| printk(KERN_INFO "%s: controller error = 0x%04x\n", |
| __func__, stat); |
| if (stat & LOCKED_BLK) |
| printk(KERN_INFO "%s: it's locked error = 0x%04x\n", |
| __func__, stat); |
| |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int s3c_onenand_command(struct mtd_info *mtd, int cmd, |
| loff_t addr, size_t len) |
| { |
| struct onenand_chip *this = mtd->priv; |
| unsigned int *m, *s; |
| int fba, fpa, fsa = 0; |
| unsigned int mem_addr; |
| int i, mcount, scount; |
| int index; |
| |
| fba = (int) (addr >> this->erase_shift); |
| fpa = (int) (addr >> this->page_shift); |
| fpa &= this->page_mask; |
| |
| mem_addr = onenand->mem_addr(fba, fpa, fsa); |
| |
| switch (cmd) { |
| case ONENAND_CMD_READ: |
| case ONENAND_CMD_READOOB: |
| case ONENAND_CMD_BUFFERRAM: |
| ONENAND_SET_NEXT_BUFFERRAM(this); |
| default: |
| break; |
| } |
| |
| index = ONENAND_CURRENT_BUFFERRAM(this); |
| |
| /* |
| * Emulate Two BufferRAMs and access with 4 bytes pointer |
| */ |
| m = (unsigned int *) onenand->page_buf; |
| s = (unsigned int *) onenand->oob_buf; |
| |
| if (index) { |
| m += (this->writesize >> 2); |
| s += (mtd->oobsize >> 2); |
| } |
| |
| mcount = mtd->writesize >> 2; |
| scount = mtd->oobsize >> 2; |
| |
| switch (cmd) { |
| case ONENAND_CMD_READ: |
| /* Main */ |
| for (i = 0; i < mcount; i++) |
| *m++ = s3c_read_cmd(CMD_MAP_01(mem_addr)); |
| return 0; |
| |
| case ONENAND_CMD_READOOB: |
| writel(TSRF, &onenand->reg->trans_spare); |
| /* Main */ |
| for (i = 0; i < mcount; i++) |
| *m++ = s3c_read_cmd(CMD_MAP_01(mem_addr)); |
| |
| /* Spare */ |
| for (i = 0; i < scount; i++) |
| *s++ = s3c_read_cmd(CMD_MAP_01(mem_addr)); |
| |
| writel(0, &onenand->reg->trans_spare); |
| return 0; |
| |
| case ONENAND_CMD_PROG: |
| /* Main */ |
| for (i = 0; i < mcount; i++) |
| s3c_write_cmd(*m++, CMD_MAP_01(mem_addr)); |
| return 0; |
| |
| case ONENAND_CMD_PROGOOB: |
| writel(TSRF, &onenand->reg->trans_spare); |
| |
| /* Main - dummy write */ |
| for (i = 0; i < mcount; i++) |
| s3c_write_cmd(0xffffffff, CMD_MAP_01(mem_addr)); |
| |
| /* Spare */ |
| for (i = 0; i < scount; i++) |
| s3c_write_cmd(*s++, CMD_MAP_01(mem_addr)); |
| |
| writel(0, &onenand->reg->trans_spare); |
| return 0; |
| |
| case ONENAND_CMD_UNLOCK_ALL: |
| s3c_write_cmd(ONENAND_UNLOCK_ALL, CMD_MAP_10(mem_addr)); |
| return 0; |
| |
| case ONENAND_CMD_ERASE: |
| s3c_write_cmd(ONENAND_ERASE_START, CMD_MAP_10(mem_addr)); |
| return 0; |
| |
| case ONENAND_CMD_MULTIBLOCK_ERASE: |
| s3c_write_cmd(ONENAND_MULTI_ERASE_SET, CMD_MAP_10(mem_addr)); |
| return 0; |
| |
| case ONENAND_CMD_ERASE_VERIFY: |
| s3c_write_cmd(ONENAND_ERASE_VERIFY, CMD_MAP_10(mem_addr)); |
| return 0; |
| |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static unsigned char *s3c_get_bufferram(struct mtd_info *mtd, int area) |
| { |
| struct onenand_chip *this = mtd->priv; |
| int index = ONENAND_CURRENT_BUFFERRAM(this); |
| unsigned char *p; |
| |
| if (area == ONENAND_DATARAM) { |
| p = (unsigned char *) onenand->page_buf; |
| if (index == 1) |
| p += this->writesize; |
| } else { |
| p = (unsigned char *) onenand->oob_buf; |
| if (index == 1) |
| p += mtd->oobsize; |
| } |
| |
| return p; |
| } |
| |
| static int onenand_read_bufferram(struct mtd_info *mtd, loff_t addr, int area, |
| unsigned char *buffer, int offset, |
| size_t count) |
| { |
| unsigned char *p; |
| |
| p = s3c_get_bufferram(mtd, area); |
| memcpy(buffer, p + offset, count); |
| return 0; |
| } |
| |
| static int onenand_write_bufferram(struct mtd_info *mtd, loff_t addr, int area, |
| const unsigned char *buffer, int offset, |
| size_t count) |
| { |
| unsigned char *p; |
| |
| p = s3c_get_bufferram(mtd, area); |
| memcpy(p + offset, buffer, count); |
| return 0; |
| } |
| |
| static int s3c_onenand_bbt_wait(struct mtd_info *mtd, int state) |
| { |
| struct samsung_onenand *reg = (struct samsung_onenand *)onenand->base; |
| unsigned int flags = INT_ACT | LOAD_CMP; |
| unsigned int stat; |
| unsigned long timeout = 0x10000; |
| |
| while (timeout--) { |
| stat = readl(®->int_err_stat); |
| if (stat & flags) |
| break; |
| } |
| /* To get correct interrupt status in timeout case */ |
| stat = readl(&onenand->reg->int_err_stat); |
| writel(stat, &onenand->reg->int_err_ack); |
| |
| if (stat & LD_FAIL_ECC_ERR) { |
| s3c_onenand_reset(); |
| return ONENAND_BBT_READ_ERROR; |
| } |
| |
| if (stat & LOAD_CMP) { |
| int ecc = readl(&onenand->reg->ecc_err_stat); |
| if (ecc & ONENAND_ECC_4BIT_UNCORRECTABLE) { |
| s3c_onenand_reset(); |
| return ONENAND_BBT_READ_ERROR; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void s3c_onenand_check_lock_status(struct mtd_info *mtd) |
| { |
| struct onenand_chip *this = mtd->priv; |
| unsigned int block, end; |
| |
| end = this->chipsize >> this->erase_shift; |
| |
| for (block = 0; block < end; block++) { |
| s3c_read_cmd(CMD_MAP_01(onenand->mem_addr(block, 0, 0))); |
| |
| if (readl(&onenand->reg->int_err_stat) & LOCKED_BLK) { |
| printf("block %d is write-protected!\n", block); |
| writel(LOCKED_BLK, &onenand->reg->int_err_ack); |
| } |
| } |
| } |
| |
| static void s3c_onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, |
| size_t len, int cmd) |
| { |
| struct onenand_chip *this = mtd->priv; |
| int start, end, start_mem_addr, end_mem_addr; |
| |
| start = ofs >> this->erase_shift; |
| start_mem_addr = onenand->mem_addr(start, 0, 0); |
| end = start + (len >> this->erase_shift) - 1; |
| end_mem_addr = onenand->mem_addr(end, 0, 0); |
| |
| if (cmd == ONENAND_CMD_LOCK) { |
| s3c_write_cmd(ONENAND_LOCK_START, CMD_MAP_10(start_mem_addr)); |
| s3c_write_cmd(ONENAND_LOCK_END, CMD_MAP_10(end_mem_addr)); |
| } else { |
| s3c_write_cmd(ONENAND_UNLOCK_START, CMD_MAP_10(start_mem_addr)); |
| s3c_write_cmd(ONENAND_UNLOCK_END, CMD_MAP_10(end_mem_addr)); |
| } |
| |
| this->wait(mtd, FL_LOCKING); |
| } |
| |
| static void s3c_onenand_unlock_all(struct mtd_info *mtd) |
| { |
| struct onenand_chip *this = mtd->priv; |
| loff_t ofs = 0; |
| size_t len = this->chipsize; |
| |
| /* FIXME workaround */ |
| this->subpagesize = mtd->writesize; |
| mtd->subpage_sft = 0; |
| |
| if (this->options & ONENAND_HAS_UNLOCK_ALL) { |
| /* Write unlock command */ |
| this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0); |
| |
| /* No need to check return value */ |
| this->wait(mtd, FL_LOCKING); |
| |
| /* Workaround for all block unlock in DDP */ |
| if (!ONENAND_IS_DDP(this)) { |
| s3c_onenand_check_lock_status(mtd); |
| return; |
| } |
| |
| /* All blocks on another chip */ |
| ofs = this->chipsize >> 1; |
| len = this->chipsize >> 1; |
| } |
| |
| s3c_onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK); |
| s3c_onenand_check_lock_status(mtd); |
| } |
| |
| int s5pc110_chip_probe(struct mtd_info *mtd) |
| { |
| return 0; |
| } |
| |
| int s5pc210_chip_probe(struct mtd_info *mtd) |
| { |
| return 0; |
| } |
| |
| void s3c_onenand_init(struct mtd_info *mtd) |
| { |
| struct onenand_chip *this = mtd->priv; |
| u32 size = (4 << 10); /* 4 KiB */ |
| |
| onenand = malloc(sizeof(struct s3c_onenand)); |
| if (!onenand) |
| return; |
| |
| onenand->page_buf = malloc(size * sizeof(char)); |
| if (!onenand->page_buf) |
| return; |
| memset(onenand->page_buf, 0xff, size); |
| |
| onenand->oob_buf = malloc(128 * sizeof(char)); |
| if (!onenand->oob_buf) |
| return; |
| memset(onenand->oob_buf, 0xff, 128); |
| |
| onenand->mtd = mtd; |
| |
| #if defined(CONFIG_S5P) |
| onenand->base = (void *)0xE7100000; |
| onenand->ahb_addr = (void *)0xB0000000; |
| #endif |
| onenand->mem_addr = s3c_mem_addr; |
| onenand->reg = (struct samsung_onenand *)onenand->base; |
| |
| this->read_word = s3c_onenand_readw; |
| this->write_word = s3c_onenand_writew; |
| |
| this->wait = s3c_onenand_wait; |
| this->bbt_wait = s3c_onenand_bbt_wait; |
| this->unlock_all = s3c_onenand_unlock_all; |
| this->command = s3c_onenand_command; |
| |
| this->read_bufferram = onenand_read_bufferram; |
| this->write_bufferram = onenand_write_bufferram; |
| |
| this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK; |
| } |