| /* |
| * Copyright (C) 2012 8D Technologies inc. |
| * Based on mt_ventoux.h, original banner below: |
| * |
| * Copyright (C) 2011 |
| * Stefano Babic, DENX Software Engineering, sbabic@denx.de. |
| * |
| * Copyright (C) 2009 TechNexion Ltd. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #include "tam3517-common.h" |
| |
| #undef CONFIG_USB_EHCI |
| #undef CONFIG_USB_EHCI_OMAP |
| #undef CONFIG_USB_OMAP3 |
| #undef CONFIG_CMD_USB |
| |
| /* Our console port is port3 */ |
| #undef CONFIG_CONS_INDEX |
| #undef CONFIG_SYS_NS16550_COM1 |
| #undef CONFIG_SERIAL1 |
| |
| #define CONFIG_CONS_INDEX 3 |
| #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 |
| #define CONFIG_SERIAL3 |
| |
| #define MACH_TYPE_ECO5_PK 4017 |
| #define CONFIG_MACH_TYPE MACH_TYPE_ECO5_PK |
| |
| #define CONFIG_BOOTDELAY 10 |
| #define CONFIG_BOOTFILE "uImage" |
| #define CONFIG_AUTO_COMPLETE |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define V_PROMPT "ECO5-PK # " |
| #define CONFIG_SYS_PROMPT V_PROMPT |
| |
| /* |
| * Set its own mtdparts, different from common |
| */ |
| #undef MTDIDS_DEFAULT |
| #undef MTDPARTS_DEFAULT |
| #define MTDIDS_DEFAULT "nand0=omap2-nand.0" |
| #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(xloader-nand)," \ |
| "1024k(uboot-nand),256k(params-nand)," \ |
| "5120k(kernel),-(ubifs)" |
| |
| /* |
| * The arithmetic in tam3517.h is wrong for us and the kernel gets overwritten. |
| */ |
| #undef CONFIG_ENV_OFFSET_REDUND |
| #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ |
| CONFIG_SYS_ENV_SECT_SIZE) |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \ |
| "install_kernel=if dhcp $bootfile; then nand erase kernel;" \ |
| "nand write $fileaddr kernel; fi\0" \ |
| "mtdparts="MTDPARTS_DEFAULT"\0" \ |
| "serverip=192.168.142.60\0" |
| |
| |
| #endif /* __CONFIG_H */ |
