| echo |
| echo "==== running autoscript ====" |
| echo |
| setenv bootdtb bootm \${kernel_boot} \${mv_initrd_addr_ram} \${mv_dtb_addr_ram} |
| setenv ramkernel setenv kernel_boot \${loadaddr} |
| setenv flashkernel setenv kernel_boot \${mv_kernel_addr} |
| setenv cpird cp \${mv_initrd_addr} \${mv_initrd_addr_ram} \${mv_initrd_length} |
| setenv bootfromflash run flashkernel cpird ramparam addcons e1000para addprofile bootdtb |
| setenv getdtb tftp \${mv_dtb_addr_ram} \${dtb_name} |
| setenv cpdtb cp \${mv_dtb_addr} \${mv_dtb_addr_ram} 0x2000 |
| setenv rundtb fdt addr \${mv_dtb_addr_ram}\;fdt boardsetup |
| setenv bootfromnet tftp \${mv_initrd_addr_ram} \${initrd_name}\;run ramkernel |
| if test ${console} = yes; |
| then |
| setenv addcons setenv bootargs \${bootargs} console=ttyPSC\${console_nr},\${baudrate}N8 |
| else |
| setenv addcons setenv bootargs \${bootargs} console=tty0 |
| fi |
| setenv e1000para setenv bootargs \${bootargs} e1000.TxDescriptors=256 e1000.SmartPowerDownEnable=1 |
| setenv set_static_ip setenv ipaddr \${static_ipaddr} |
| setenv set_static_nm setenv netmask \${static_netmask} |
| setenv set_static_gw setenv gatewayip \${static_gateway} |
| setenv set_ip setenv ip \${ipaddr}::\${gatewayip}:\${netmask} |
| setenv ramparam setenv bootargs root=/dev/ram0 ro rootfstype=squashfs |
| if test ${oprofile} = yes; |
| then |
| setenv addprofile setenv bootargs \${bootargs} profile=\${profile} |
| fi |
| if test ${autoscript_boot} != no; |
| then |
| if test ${netboot} = yes; |
| then |
| bootp |
| if test $? = 0; |
| then |
| echo "=== bootp succeeded -> netboot ===" |
| run set_ip |
| run getdtb rundtb bootfromnet ramparam addcons e1000para addprofile bootdtb |
| else |
| echo "=== netboot failed ===" |
| fi |
| fi |
| run set_static_ip set_static_nm set_static_gw set_ip |
| echo "=== bootfromflash ===" |
| run cpdtb rundtb bootfromflash |
| else |
| echo "=== boot stopped with autoscript_boot no ===" |
| fi |
