| # | |
| # The commands in this table are sorted alphabetically by the | |
| # command name and in descending order by the command name string | |
| # length. This is to prevent conflicts in command name parsing. | |
| # Please ensure that new commands are added according to that rule. | |
| # See $(TOPDIR)/common/command.c | |
| # | |
| ######################## | |
| # | |
| # command length | |
| # | |
| ######################## | |
| askenv 8 | |
| as 2 | |
| autoscr 5 | |
| base 2 | |
| bdinfo 2 | |
| bmp 3 | |
| bootelf 7 | |
| bootm 5 | |
| bootp 5 | |
| bootvx 6 | |
| bootd 4 | |
| break 2 | |
| brginfo 3 | |
| carinfo 3 | |
| chpart 6 | |
| cmp 3 | |
| coninfo 5 | |
| continue 4 | |
| cp 2 | |
| crc32 3 | |
| date 3 | |
| dcache 2 | |
| dhcp 4 | |
| dmainfo 3 | |
| ds 2 | |
| dtt 3 | |
| echo 4 | |
| eeprom 3 | |
| erase 3 | |
| fccinfo 3 | |
| fdcboot 4 | |
| flinfo 3 | |
| fpga 4 | |
| fsinfo 5 | |
| fsload 5 | |
| getdcr 6 # IBM 4XX DCR registers | |
| go 2 | |
| help 1 | |
| i2cinfo 4 | |
| i2c 3 | |
| icache 2 | |
| icinfo 3 | |
| ide 3 | |
| iminfo 3 | |
| iopinfo 3 | |
| irqinfo 3 | |
| kgdb 4 | |
| loadb 5 | |
| loads 5 | |
| loop 4 | |
| ls 2 | |
| mccinfo 3 | |
| md 2 | |
| memcinfo 4 | |
| mii 3 | |
| mm 2 | |
| mtest 5 | |
| muxinfo 3 | |
| mw 2 | |
| next 4 | |
| nm 2 | |
| pciinfo 3 | |
| pinit 4 | |
| printenv 8 | |
| protect 4 | |
| rarpboot 4 | |
| rdump 5 | |
| reginfo 3 | |
| reset 5 | |
| run 3 | |
| saveenv 4 | |
| sccinfo 3 | |
| scsiboot 5 | |
| scsi 4 | |
| siiinfo 3 | |
| sitinfo 3 | |
| siuinfo 3 | |
| setdcr 6 # IBM 4XX DCR registers | |
| setenv 6 | |
| smcinfo 3 | |
| spiinfo 3 | |
| sspi 4 | |
| stack 5 | |
| step 4 | |
| tftpboot 4 | |
| usbboot 5 | |
| usb 4 | |
| version 4 | |
| ? 1 |