| /* | |
| * Copyright (c) 2011 The Chromium OS Authors. | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #include <common.h> | |
| #include <usb.h> | |
| #include "usb_ether.h" | |
| typedef void (*usb_eth_before_probe)(void); | |
| typedef int (*usb_eth_probe)(struct usb_device *dev, unsigned int ifnum, | |
| struct ueth_data *ss); | |
| typedef int (*usb_eth_get_info)(struct usb_device *dev, struct ueth_data *ss, | |
| struct eth_device *dev_desc); | |
| struct usb_eth_prob_dev { | |
| usb_eth_before_probe before_probe; /* optional */ | |
| usb_eth_probe probe; | |
| usb_eth_get_info get_info; | |
| }; | |
| /* driver functions go here, each bracketed by #ifdef CONFIG_USB_ETHER_xxx */ | |
| static const struct usb_eth_prob_dev prob_dev[] = { | |
| #ifdef CONFIG_USB_ETHER_ASIX | |
| { | |
| .before_probe = asix_eth_before_probe, | |
| .probe = asix_eth_probe, | |
| .get_info = asix_eth_get_info, | |
| }, | |
| #endif | |
| #ifdef CONFIG_USB_ETHER_ASIX88179 | |
| { | |
| .before_probe = ax88179_eth_before_probe, | |
| .probe = ax88179_eth_probe, | |
| .get_info = ax88179_eth_get_info, | |
| }, | |
| #endif | |
| #ifdef CONFIG_USB_ETHER_MCS7830 | |
| { | |
| .before_probe = mcs7830_eth_before_probe, | |
| .probe = mcs7830_eth_probe, | |
| .get_info = mcs7830_eth_get_info, | |
| }, | |
| #endif | |
| #ifdef CONFIG_USB_ETHER_SMSC95XX | |
| { | |
| .before_probe = smsc95xx_eth_before_probe, | |
| .probe = smsc95xx_eth_probe, | |
| .get_info = smsc95xx_eth_get_info, | |
| }, | |
| #endif | |
| { }, /* END */ | |
| }; | |
| static int usb_max_eth_dev; /* number of highest available usb eth device */ | |
| static struct ueth_data usb_eth[USB_MAX_ETH_DEV]; | |
| /******************************************************************************* | |
| * tell if current ethernet device is a usb dongle | |
| */ | |
| int is_eth_dev_on_usb_host(void) | |
| { | |
| int i; | |
| struct eth_device *dev = eth_get_dev(); | |
| if (dev) { | |
| for (i = 0; i < usb_max_eth_dev; i++) | |
| if (&usb_eth[i].eth_dev == dev) | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Given a USB device, ask each driver if it can support it, and attach it | |
| * to the first driver that says 'yes' | |
| */ | |
| static void probe_valid_drivers(struct usb_device *dev) | |
| { | |
| struct eth_device *eth; | |
| int j; | |
| for (j = 0; prob_dev[j].probe && prob_dev[j].get_info; j++) { | |
| if (!prob_dev[j].probe(dev, 0, &usb_eth[usb_max_eth_dev])) | |
| continue; | |
| /* | |
| * ok, it is a supported eth device. Get info and fill it in | |
| */ | |
| eth = &usb_eth[usb_max_eth_dev].eth_dev; | |
| if (prob_dev[j].get_info(dev, | |
| &usb_eth[usb_max_eth_dev], | |
| eth)) { | |
| /* found proper driver */ | |
| /* register with networking stack */ | |
| usb_max_eth_dev++; | |
| /* | |
| * usb_max_eth_dev must be incremented prior to this | |
| * call since eth_current_changed (internally called) | |
| * relies on it | |
| */ | |
| eth_register(eth); | |
| if (eth_write_hwaddr(eth, "usbeth", | |
| usb_max_eth_dev - 1)) | |
| puts("Warning: failed to set MAC address\n"); | |
| break; | |
| } | |
| } | |
| } | |
| /******************************************************************************* | |
| * scan the usb and reports device info | |
| * to the user if mode = 1 | |
| * returns current device or -1 if no | |
| */ | |
| int usb_host_eth_scan(int mode) | |
| { | |
| int i, old_async; | |
| struct usb_device *dev; | |
| if (mode == 1) | |
| printf(" scanning usb for ethernet devices... "); | |
| old_async = usb_disable_asynch(1); /* asynch transfer not allowed */ | |
| /* unregister a previously detected device */ | |
| for (i = 0; i < usb_max_eth_dev; i++) | |
| eth_unregister(&usb_eth[i].eth_dev); | |
| memset(usb_eth, 0, sizeof(usb_eth)); | |
| for (i = 0; prob_dev[i].probe; i++) { | |
| if (prob_dev[i].before_probe) | |
| prob_dev[i].before_probe(); | |
| } | |
| usb_max_eth_dev = 0; | |
| for (i = 0; i < USB_MAX_DEVICE; i++) { | |
| dev = usb_get_dev_index(i); /* get device */ | |
| debug("i=%d\n", i); | |
| if (dev == NULL) | |
| break; /* no more devices available */ | |
| /* find valid usb_ether driver for this device, if any */ | |
| probe_valid_drivers(dev); | |
| /* check limit */ | |
| if (usb_max_eth_dev == USB_MAX_ETH_DEV) { | |
| printf("max USB Ethernet Device reached: %d stopping\n", | |
| usb_max_eth_dev); | |
| break; | |
| } | |
| } /* for */ | |
| usb_disable_asynch(old_async); /* restore asynch value */ | |
| printf("%d Ethernet Device(s) found\n", usb_max_eth_dev); | |
| if (usb_max_eth_dev > 0) | |
| return 0; | |
| return -1; | |
| } |