| /* | 
 |  * (C) Copyright 2011 | 
 |  * Heiko Schocher, DENX Software Engineering, hs@denx.de. | 
 |  * | 
 |  * Based on: | 
 |  * (C) Copyright 2009 | 
 |  * Stefano Babic, DENX Software Engineering, sbabic@denx.de. | 
 |  * | 
 |  * (C) Copyright 2008 | 
 |  * Marvell Semiconductor <www.marvell.com> | 
 |  * Written-by: Prafulla Wadaskar <prafulla@marvell.com> | 
 |  * | 
 |  * See file CREDITS for list of people who contributed to this | 
 |  * project. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation; either version 2 of | 
 |  * the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
 |  * MA 02111-1307 USA | 
 |  */ | 
 |  | 
 | /* Required to obtain the getline prototype from stdio.h */ | 
 | #define _GNU_SOURCE | 
 |  | 
 | #include "mkimage.h" | 
 | #include <image.h> | 
 | #include "ublimage.h" | 
 |  | 
 | /* | 
 |  * Supported commands for configuration file | 
 |  */ | 
 | static table_entry_t ublimage_cmds[] = { | 
 | 	{CMD_BOOT_MODE,	"MODE",		"UBL special modes", }, | 
 | 	{CMD_ENTRY,	"ENTRY",	"Entry point addr for bootloader", }, | 
 | 	{CMD_PAGE,	"PAGES", | 
 | 		"number of pages (size of bootloader)", }, | 
 | 	{CMD_ST_BLOCK,	"START_BLOCK", | 
 | 		"block number where bootloader is present", }, | 
 | 	{CMD_ST_PAGE,	"START_PAGE", | 
 | 		"page number where bootloader is present", }, | 
 | 	{CMD_LD_ADDR,	"LD_ADDR", | 
 | 		"load addr", }, | 
 | 	{-1,		"",		"", }, | 
 | }; | 
 |  | 
 | /* | 
 |  * Supported Boot options for configuration file | 
 |  * this is needed to set the correct flash offset | 
 |  */ | 
 | static table_entry_t ublimage_bootops[] = { | 
 | 	{UBL_MAGIC_SAFE,	"safe",	"Safe boot mode",	}, | 
 | 	{-1,			"",	"Invalid",		}, | 
 | }; | 
 |  | 
 | static struct ubl_header ublimage_header; | 
 |  | 
 | static uint32_t get_cfg_value(char *token, char *name,  int linenr) | 
 | { | 
 | 	char *endptr; | 
 | 	uint32_t value; | 
 |  | 
 | 	errno = 0; | 
 | 	value = strtoul(token, &endptr, 16); | 
 | 	if (errno || (token == endptr)) { | 
 | 		fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n", | 
 | 			name,  linenr, token); | 
 | 		exit(EXIT_FAILURE); | 
 | 	} | 
 | 	return value; | 
 | } | 
 |  | 
 | static void print_hdr(struct ubl_header *ubl_hdr) | 
 | { | 
 | 	printf("Image Type : Davinci UBL Boot Image\n"); | 
 | 	printf("UBL magic  : %08x\n", ubl_hdr->magic); | 
 | 	printf("Entry Point: %08x\n", ubl_hdr->entry); | 
 | 	printf("nr of pages: %08x\n", ubl_hdr->pages); | 
 | 	printf("start block: %08x\n", ubl_hdr->block); | 
 | 	printf("start page : %08x\n", ubl_hdr->page); | 
 | } | 
 |  | 
 | static void parse_cfg_cmd(struct ubl_header *ublhdr, int32_t cmd, char *token, | 
 | 				char *name, int lineno, int fld, int dcd_len) | 
 | { | 
 | 	static int cmd_ver_first = ~0; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case CMD_BOOT_MODE: | 
 | 		ublhdr->magic = get_table_entry_id(ublimage_bootops, | 
 | 					"ublimage special boot mode", token); | 
 | 		if (ublhdr->magic == -1) { | 
 | 			fprintf(stderr, "Error: %s[%d] -Invalid boot mode" | 
 | 				"(%s)\n", name, lineno, token); | 
 | 			exit(EXIT_FAILURE); | 
 | 		} | 
 | 		ublhdr->magic += UBL_MAGIC_BASE; | 
 | 		if (unlikely(cmd_ver_first != 1)) | 
 | 			cmd_ver_first = 0; | 
 | 		break; | 
 | 	case CMD_ENTRY: | 
 | 		ublhdr->entry = get_cfg_value(token, name, lineno); | 
 | 		break; | 
 | 	case CMD_PAGE: | 
 | 		ublhdr->pages = get_cfg_value(token, name, lineno); | 
 | 		break; | 
 | 	case CMD_ST_BLOCK: | 
 | 		ublhdr->block = get_cfg_value(token, name, lineno); | 
 | 		break; | 
 | 	case CMD_ST_PAGE: | 
 | 		ublhdr->page = get_cfg_value(token, name, lineno); | 
 | 		break; | 
 | 	case CMD_LD_ADDR: | 
 | 		ublhdr->pll_m = get_cfg_value(token, name, lineno); | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | static void parse_cfg_fld(struct ubl_header *ublhdr, int32_t *cmd, | 
 | 		char *token, char *name, int lineno, int fld, int *dcd_len) | 
 | { | 
 |  | 
 | 	switch (fld) { | 
 | 	case CFG_COMMAND: | 
 | 		*cmd = get_table_entry_id(ublimage_cmds, | 
 | 			"ublimage commands", token); | 
 | 		if (*cmd < 0) { | 
 | 			fprintf(stderr, "Error: %s[%d] - Invalid command" | 
 | 			"(%s)\n", name, lineno, token); | 
 | 			exit(EXIT_FAILURE); | 
 | 		} | 
 | 		break; | 
 | 	case CFG_REG_VALUE: | 
 | 		parse_cfg_cmd(ublhdr, *cmd, token, name, lineno, fld, *dcd_len); | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 | } | 
 | static uint32_t parse_cfg_file(struct ubl_header *ublhdr, char *name) | 
 | { | 
 | 	FILE *fd = NULL; | 
 | 	char *line = NULL; | 
 | 	char *token, *saveptr1, *saveptr2; | 
 | 	int lineno = 0; | 
 | 	int	i; | 
 | 	char *ptr = (char *)ublhdr; | 
 | 	int fld; | 
 | 	size_t len; | 
 | 	int dcd_len = 0; | 
 | 	int32_t cmd; | 
 | 	int ublhdrlen = sizeof(struct ubl_header); | 
 |  | 
 | 	fd = fopen(name, "r"); | 
 | 	if (fd == 0) { | 
 | 		fprintf(stderr, "Error: %s - Can't open DCD file\n", name); | 
 | 		exit(EXIT_FAILURE); | 
 | 	} | 
 |  | 
 | 	/* Fill header with 0xff */ | 
 | 	for (i = 0; i < ublhdrlen; i++) { | 
 | 		*ptr = 0xff; | 
 | 		ptr++; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Very simple parsing, line starting with # are comments | 
 | 	 * and are dropped | 
 | 	 */ | 
 | 	while ((getline(&line, &len, fd)) > 0) { | 
 | 		lineno++; | 
 |  | 
 | 		token = strtok_r(line, "\r\n", &saveptr1); | 
 | 		if (token == NULL) | 
 | 			continue; | 
 |  | 
 | 		/* Check inside the single line */ | 
 | 		for (fld = CFG_COMMAND, cmd = CMD_INVALID, | 
 | 				line = token; ; line = NULL, fld++) { | 
 | 			token = strtok_r(line, " \t", &saveptr2); | 
 | 			if (token == NULL) | 
 | 				break; | 
 |  | 
 | 			/* Drop all text starting with '#' as comments */ | 
 | 			if (token[0] == '#') | 
 | 				break; | 
 |  | 
 | 			parse_cfg_fld(ublhdr, &cmd, token, name, | 
 | 					lineno, fld, &dcd_len); | 
 | 		} | 
 | 	} | 
 | 	fclose(fd); | 
 |  | 
 | 	return dcd_len; | 
 | } | 
 |  | 
 | static int ublimage_check_image_types(uint8_t type) | 
 | { | 
 | 	if (type == IH_TYPE_UBLIMAGE) | 
 | 		return EXIT_SUCCESS; | 
 | 	else | 
 | 		return EXIT_FAILURE; | 
 | } | 
 |  | 
 | static int ublimage_verify_header(unsigned char *ptr, int image_size, | 
 | 			struct mkimage_params *params) | 
 | { | 
 | 	struct ubl_header *ubl_hdr = (struct ubl_header *)ptr; | 
 |  | 
 | 	if ((ubl_hdr->magic & 0xFFFFFF00) != UBL_MAGIC_BASE) | 
 | 		return -1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void ublimage_print_header(const void *ptr) | 
 | { | 
 | 	struct ubl_header *ubl_hdr = (struct ubl_header *) ptr; | 
 |  | 
 | 	print_hdr(ubl_hdr); | 
 | } | 
 |  | 
 | static void ublimage_set_header(void *ptr, struct stat *sbuf, int ifd, | 
 | 				struct mkimage_params *params) | 
 | { | 
 | 	struct ubl_header *ublhdr = (struct ubl_header *)ptr; | 
 |  | 
 | 	/* Parse configuration file */ | 
 | 	parse_cfg_file(ublhdr, params->imagename); | 
 | } | 
 |  | 
 | int ublimage_check_params(struct mkimage_params *params) | 
 | { | 
 | 	if (!params) | 
 | 		return CFG_INVALID; | 
 | 	if (!strlen(params->imagename)) { | 
 | 		fprintf(stderr, "Error: %s - Configuration file not" | 
 | 			"specified, it is needed for ublimage generation\n", | 
 | 			params->cmdname); | 
 | 		return CFG_INVALID; | 
 | 	} | 
 | 	/* | 
 | 	 * Check parameters: | 
 | 	 * XIP is not allowed and verify that incompatible | 
 | 	 * parameters are not sent at the same time | 
 | 	 * For example, if list is required a data image must not be provided | 
 | 	 */ | 
 | 	return	(params->dflag && (params->fflag || params->lflag)) || | 
 | 		(params->fflag && (params->dflag || params->lflag)) || | 
 | 		(params->lflag && (params->dflag || params->fflag)) || | 
 | 		(params->xflag) || !(strlen(params->imagename)); | 
 | } | 
 |  | 
 | /* | 
 |  * ublimage parameters | 
 |  */ | 
 | static struct image_type_params ublimage_params = { | 
 | 	.name		= "Davinci UBL boot support", | 
 | 	.header_size	= sizeof(struct ubl_header), | 
 | 	.hdr		= (void *)&ublimage_header, | 
 | 	.check_image_type = ublimage_check_image_types, | 
 | 	.verify_header	= ublimage_verify_header, | 
 | 	.print_header	= ublimage_print_header, | 
 | 	.set_header	= ublimage_set_header, | 
 | 	.check_params	= ublimage_check_params, | 
 | }; | 
 |  | 
 | void init_ubl_image_type(void) | 
 | { | 
 | 	mkimage_register(&ublimage_params); | 
 | } |