| /* LEON2 header file. LEON2 is a SOC processor. |
| * |
| * (C) Copyright 2008 |
| * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| * |
| */ |
| |
| #ifndef __LEON2_H__ |
| #define __LEON2_H__ |
| |
| #ifdef CONFIG_LEON2 |
| |
| /* LEON 2 I/O register definitions */ |
| #define LEON2_PREGS 0x80000000 |
| #define LEON2_MCFG1 0x00 |
| #define LEON2_MCFG2 0x04 |
| #define LEON2_ECTRL 0x08 |
| #define LEON2_FADDR 0x0C |
| #define LEON2_MSTAT 0x10 |
| #define LEON2_CCTRL 0x14 |
| #define LEON2_PWDOWN 0x18 |
| #define LEON2_WPROT1 0x1C |
| #define LEON2_WPROT2 0x20 |
| #define LEON2_LCONF 0x24 |
| #define LEON2_TCNT0 0x40 |
| #define LEON2_TRLD0 0x44 |
| #define LEON2_TCTRL0 0x48 |
| #define LEON2_TCNT1 0x50 |
| #define LEON2_TRLD1 0x54 |
| #define LEON2_TCTRL1 0x58 |
| #define LEON2_SCNT 0x60 |
| #define LEON2_SRLD 0x64 |
| #define LEON2_UART0 0x70 |
| #define LEON2_UDATA0 0x70 |
| #define LEON2_USTAT0 0x74 |
| #define LEON2_UCTRL0 0x78 |
| #define LEON2_USCAL0 0x7C |
| #define LEON2_UART1 0x80 |
| #define LEON2_UDATA1 0x80 |
| #define LEON2_USTAT1 0x84 |
| #define LEON2_UCTRL1 0x88 |
| #define LEON2_USCAL1 0x8C |
| #define LEON2_IMASK 0x90 |
| #define LEON2_IPEND 0x94 |
| #define LEON2_IFORCE 0x98 |
| #define LEON2_ICLEAR 0x9C |
| #define LEON2_IOREG 0xA0 |
| #define LEON2_IODIR 0xA4 |
| #define LEON2_IOICONF 0xA8 |
| #define LEON2_IPEND2 0xB0 |
| #define LEON2_IMASK2 0xB4 |
| #define LEON2_ISTAT2 0xB8 |
| #define LEON2_ICLEAR2 0xBC |
| |
| #ifndef __ASSEMBLER__ |
| /* |
| * Structure for LEON memory mapped registers. |
| * |
| * Source: Section 6.1 - On-chip registers |
| * |
| * NOTE: There is only one of these structures per CPU, its base address |
| * is 0x80000000, and the variable LEON_REG is placed there by the |
| * linkcmds file. |
| */ |
| typedef struct { |
| volatile unsigned int Memory_Config_1; |
| volatile unsigned int Memory_Config_2; |
| volatile unsigned int Edac_Control; |
| volatile unsigned int Failed_Address; |
| volatile unsigned int Memory_Status; |
| volatile unsigned int Cache_Control; |
| volatile unsigned int Power_Down; |
| volatile unsigned int Write_Protection_1; |
| volatile unsigned int Write_Protection_2; |
| volatile unsigned int Leon_Configuration; |
| volatile unsigned int dummy2; |
| volatile unsigned int dummy3; |
| volatile unsigned int dummy4; |
| volatile unsigned int dummy5; |
| volatile unsigned int dummy6; |
| volatile unsigned int dummy7; |
| volatile unsigned int Timer_Counter_1; |
| volatile unsigned int Timer_Reload_1; |
| volatile unsigned int Timer_Control_1; |
| volatile unsigned int Watchdog; |
| volatile unsigned int Timer_Counter_2; |
| volatile unsigned int Timer_Reload_2; |
| volatile unsigned int Timer_Control_2; |
| volatile unsigned int dummy8; |
| volatile unsigned int Scaler_Counter; |
| volatile unsigned int Scaler_Reload; |
| volatile unsigned int dummy9; |
| volatile unsigned int dummy10; |
| volatile unsigned int UART_Channel_1; |
| volatile unsigned int UART_Status_1; |
| volatile unsigned int UART_Control_1; |
| volatile unsigned int UART_Scaler_1; |
| volatile unsigned int UART_Channel_2; |
| volatile unsigned int UART_Status_2; |
| volatile unsigned int UART_Control_2; |
| volatile unsigned int UART_Scaler_2; |
| volatile unsigned int Interrupt_Mask; |
| volatile unsigned int Interrupt_Pending; |
| volatile unsigned int Interrupt_Force; |
| volatile unsigned int Interrupt_Clear; |
| volatile unsigned int PIO_Data; |
| volatile unsigned int PIO_Direction; |
| volatile unsigned int PIO_Interrupt; |
| } LEON2_regs; |
| |
| typedef struct { |
| volatile unsigned int UART_Channel; |
| volatile unsigned int UART_Status; |
| volatile unsigned int UART_Control; |
| volatile unsigned int UART_Scaler; |
| } LEON2_Uart_regs; |
| |
| #endif |
| |
| /* |
| * The following constants are intended to be used ONLY in assembly |
| * language files. |
| * |
| * NOTE: The intended style of usage is to load the address of LEON REGS |
| * into a register and then use these as displacements from |
| * that register. |
| */ |
| #define LEON_REG_MEMCFG1_OFFSET 0x00 |
| #define LEON_REG_MEMCFG2_OFFSET 0x04 |
| #define LEON_REG_EDACCTRL_OFFSET 0x08 |
| #define LEON_REG_FAILADDR_OFFSET 0x0C |
| #define LEON_REG_MEMSTATUS_OFFSET 0x10 |
| #define LEON_REG_CACHECTRL_OFFSET 0x14 |
| #define LEON_REG_POWERDOWN_OFFSET 0x18 |
| #define LEON_REG_WRITEPROT1_OFFSET 0x1C |
| #define LEON_REG_WRITEPROT2_OFFSET 0x20 |
| #define LEON_REG_LEONCONF_OFFSET 0x24 |
| #define LEON_REG_UNIMPLEMENTED_2_OFFSET 0x28 |
| #define LEON_REG_UNIMPLEMENTED_3_OFFSET 0x2C |
| #define LEON_REG_UNIMPLEMENTED_4_OFFSET 0x30 |
| #define LEON_REG_UNIMPLEMENTED_5_OFFSET 0x34 |
| #define LEON_REG_UNIMPLEMENTED_6_OFFSET 0x38 |
| #define LEON_REG_UNIMPLEMENTED_7_OFFSET 0x3C |
| #define LEON_REG_TIMERCNT1_OFFSET 0x40 |
| #define LEON_REG_TIMERLOAD1_OFFSET 0x44 |
| #define LEON_REG_TIMERCTRL1_OFFSET 0x48 |
| #define LEON_REG_WDOG_OFFSET 0x4C |
| #define LEON_REG_TIMERCNT2_OFFSET 0x50 |
| #define LEON_REG_TIMERLOAD2_OFFSET 0x54 |
| #define LEON_REG_TIMERCTRL2_OFFSET 0x58 |
| #define LEON_REG_UNIMPLEMENTED_8_OFFSET 0x5C |
| #define LEON_REG_SCALERCNT_OFFSET 0x60 |
| #define LEON_REG_SCALER_LOAD_OFFSET 0x64 |
| #define LEON_REG_UNIMPLEMENTED_9_OFFSET 0x68 |
| #define LEON_REG_UNIMPLEMENTED_10_OFFSET 0x6C |
| #define LEON_REG_UARTDATA1_OFFSET 0x70 |
| #define LEON_REG_UARTSTATUS1_OFFSET 0x74 |
| #define LEON_REG_UARTCTRL1_OFFSET 0x78 |
| #define LEON_REG_UARTSCALER1_OFFSET 0x7C |
| #define LEON_REG_UARTDATA2_OFFSET 0x80 |
| #define LEON_REG_UARTSTATUS2_OFFSET 0x84 |
| #define LEON_REG_UARTCTRL2_OFFSET 0x88 |
| #define LEON_REG_UARTSCALER2_OFFSET 0x8C |
| #define LEON_REG_IRQMASK_OFFSET 0x90 |
| #define LEON_REG_IRQPEND_OFFSET 0x94 |
| #define LEON_REG_IRQFORCE_OFFSET 0x98 |
| #define LEON_REG_IRQCLEAR_OFFSET 0x9C |
| #define LEON_REG_PIODATA_OFFSET 0xA0 |
| #define LEON_REG_PIODIR_OFFSET 0xA4 |
| #define LEON_REG_PIOIRQ_OFFSET 0xA8 |
| #define LEON_REG_SIM_RAM_SIZE_OFFSET 0xF4 |
| #define LEON_REG_SIM_ROM_SIZE_OFFSET 0xF8 |
| |
| /* |
| * Interrupt Sources |
| * |
| * The interrupt source numbers directly map to the trap type and to |
| * the bits used in the Interrupt Clear, Interrupt Force, Interrupt Mask, |
| * and the Interrupt Pending Registers. |
| */ |
| #define LEON_INTERRUPT_CORRECTABLE_MEMORY_ERROR 1 |
| #define LEON_INTERRUPT_UART_1_RX_TX 2 |
| #define LEON_INTERRUPT_UART_0_RX_TX 3 |
| #define LEON_INTERRUPT_EXTERNAL_0 4 |
| #define LEON_INTERRUPT_EXTERNAL_1 5 |
| #define LEON_INTERRUPT_EXTERNAL_2 6 |
| #define LEON_INTERRUPT_EXTERNAL_3 7 |
| #define LEON_INTERRUPT_TIMER1 8 |
| #define LEON_INTERRUPT_TIMER2 9 |
| #define LEON_INTERRUPT_EMPTY1 10 |
| #define LEON_INTERRUPT_EMPTY2 11 |
| #define LEON_INTERRUPT_OPEN_ETH 12 |
| #define LEON_INTERRUPT_EMPTY4 13 |
| #define LEON_INTERRUPT_EMPTY5 14 |
| #define LEON_INTERRUPT_EMPTY6 15 |
| |
| /* Timer Bits */ |
| #define LEON2_TIMER_CTRL_EN 0x1 /* Timer enable */ |
| #define LEON2_TIMER_CTRL_RS 0x2 /* Timer reStart */ |
| #define LEON2_TIMER_CTRL_LD 0x4 /* Timer reLoad */ |
| #define LEON2_TIMER1_IRQNO 8 /* Timer 1 IRQ number */ |
| #define LEON2_TIMER2_IRQNO 9 /* Timer 2 IRQ number */ |
| #define LEON2_TIMER1_IE (1<<LEON2_TIMER1_IRQNO) /* Timer 1 interrupt enable */ |
| #define LEON2_TIMER2_IE (1<<LEON2_TIMER2_IRQNO) /* Timer 2 interrupt enable */ |
| |
| /* UART bits */ |
| #define LEON2_UART_CTRL_RE 1 /* UART Receiver enable */ |
| #define LEON2_UART_CTRL_TE 2 /* UART Transmitter enable */ |
| #define LEON2_UART_CTRL_RI 4 /* UART Receiver Interrupt enable */ |
| #define LEON2_UART_CTRL_TI 8 /* UART Transmitter Interrupt enable */ |
| #define LEON2_UART_CTRL_DBG (1<<11) /* Debug Bit used by GRMON */ |
| |
| #define LEON2_UART_STAT_DR 1 /* UART Data Ready */ |
| #define LEON2_UART_STAT_TSE 2 /* UART Transmit Shift Reg empty */ |
| #define LEON2_UART_STAT_THE 4 /* UART Transmit Hold Reg empty */ |
| |
| #else |
| #error Include LEON2 header file only if LEON2 processor |
| #endif |
| |
| #endif |
