| /* | |
| * (C) Copyright 2006-2007 | |
| * Stefan Roese, DENX Software Engineering, sr@denx.de. | |
| * | |
| * (C) Copyright 2006 | |
| * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com | |
| * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| /************************************************************************ | |
| * sequoia.h - configuration for Sequoia & Rainier boards | |
| ***********************************************************************/ | |
| #ifndef __CONFIG_H | |
| #define __CONFIG_H | |
| /*----------------------------------------------------------------------- | |
| * High Level Configuration Options | |
| *----------------------------------------------------------------------*/ | |
| /* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */ | |
| #ifndef CONFIG_RAINIER | |
| #define CONFIG_440EPX 1 /* Specific PPC440EPx */ | |
| #else | |
| #define CONFIG_440GRX 1 /* Specific PPC440GRx */ | |
| #endif | |
| #define CONFIG_440 1 /* ... PPC440 family */ | |
| #define CONFIG_4xx 1 /* ... PPC4xx family */ | |
| /* Detect Sequoia PLL input clock automatically via CPLD bit */ | |
| #define CONFIG_SYS_CLK_FREQ ((in8(CFG_BCSR_BASE + 3) & 0x80) ? \ | |
| 33333333 : 33000000) | |
| #if 0 | |
| /* | |
| * 44x dcache supported is working now on sequoia, but we don't enable | |
| * it yet since it needs further testing | |
| */ | |
| #define CONFIG_4xx_DCACHE /* enable dcache */ | |
| #endif | |
| #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ | |
| #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ | |
| /*----------------------------------------------------------------------- | |
| * Base addresses -- Note these are effective addresses where the | |
| * actual resources get mapped (not physical addresses) | |
| *----------------------------------------------------------------------*/ | |
| #define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ | |
| #define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ | |
| #define CFG_TLB_FOR_BOOT_FLASH 0x0003 | |
| #define CFG_BOOT_BASE_ADDR 0xf0000000 | |
| #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ | |
| #define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ | |
| #define CFG_MONITOR_BASE TEXT_BASE | |
| #define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */ | |
| #define CFG_OCM_BASE 0xe0010000 /* ocm */ | |
| #define CFG_OCM_DATA_ADDR CFG_OCM_BASE | |
| #define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ | |
| #define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ | |
| #define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 | |
| #define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 | |
| #define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 | |
| /* Don't change either of these */ | |
| #define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ | |
| #define CFG_USB2D0_BASE 0xe0000100 | |
| #define CFG_USB_DEVICE 0xe0000000 | |
| #define CFG_USB_HOST 0xe0000400 | |
| #define CFG_BCSR_BASE 0xc0000000 | |
| /*----------------------------------------------------------------------- | |
| * Initial RAM & stack pointer | |
| *----------------------------------------------------------------------*/ | |
| /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ | |
| #define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ | |
| #define CFG_INIT_RAM_END (4 << 10) | |
| #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ | |
| #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) | |
| #define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR | |
| /*----------------------------------------------------------------------- | |
| * Serial Port | |
| *----------------------------------------------------------------------*/ | |
| #define CFG_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ | |
| #define CONFIG_BAUDRATE 115200 | |
| #define CONFIG_SERIAL_MULTI 1 | |
| /* define this if you want console on UART1 */ | |
| #undef CONFIG_UART1_CONSOLE | |
| #define CFG_BAUDRATE_TABLE \ | |
| {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
| /*----------------------------------------------------------------------- | |
| * Environment | |
| *----------------------------------------------------------------------*/ | |
| #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) | |
| #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ | |
| #else | |
| #define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ | |
| #define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */ | |
| #endif | |
| /*----------------------------------------------------------------------- | |
| * FLASH related | |
| *----------------------------------------------------------------------*/ | |
| #define CFG_FLASH_CFI /* The flash is CFI compatible */ | |
| #define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ | |
| #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } | |
| #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ | |
| #define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ | |
| #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ | |
| #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ | |
| #define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ | |
| #define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ | |
| #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ | |
| #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ | |
| #ifdef CFG_ENV_IS_IN_FLASH | |
| #define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ | |
| #define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) | |
| #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ | |
| /* Address and size of Redundant Environment Sector */ | |
| #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) | |
| #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) | |
| #endif | |
| /* | |
| * IPL (Initial Program Loader, integrated inside CPU) | |
| * Will load first 4k from NAND (SPL) into cache and execute it from there. | |
| * | |
| * SPL (Secondary Program Loader) | |
| * Will load special U-Boot version (NUB) from NAND and execute it. This SPL | |
| * has to fit into 4kByte. It sets up the CPU and configures the SDRAM | |
| * controller and the NAND controller so that the special U-Boot image can be | |
| * loaded from NAND to SDRAM. | |
| * | |
| * NUB (NAND U-Boot) | |
| * This NAND U-Boot (NUB) is a special U-Boot version which can be started | |
| * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. | |
| * | |
| * On 440EPx the SPL is copied to SDRAM before the NAND controller is | |
| * set up. While still running from cache, I experienced problems accessing | |
| * the NAND controller. sr - 2006-08-25 | |
| */ | |
| #define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ | |
| #define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ | |
| #define CFG_NAND_BOOT_SPL_DST (CFG_OCM_BASE + (12 << 10)) /* Copy SPL here */ | |
| #define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ | |
| #define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */ | |
| #define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST) | |
| /* | |
| * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) | |
| */ | |
| #define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ | |
| #define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ | |
| /* | |
| * Now the NAND chip has to be defined (no autodetection used!) | |
| */ | |
| #define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ | |
| #define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ | |
| #define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ | |
| #define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ | |
| #undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ | |
| #define CFG_NAND_ECCSIZE 256 | |
| #define CFG_NAND_ECCBYTES 3 | |
| #define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) | |
| #define CFG_NAND_OOBSIZE 16 | |
| #define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) | |
| #define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} | |
| #ifdef CFG_ENV_IS_IN_NAND | |
| /* | |
| * For NAND booting the environment is embedded in the U-Boot image. Please take | |
| * look at the file board/amcc/sequoia/u-boot-nand.lds for details. | |
| */ | |
| #define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE | |
| #define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE) | |
| #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) | |
| #endif | |
| /*----------------------------------------------------------------------- | |
| * DDR SDRAM | |
| *----------------------------------------------------------------------*/ | |
| #define CFG_MBYTES_SDRAM (256) /* 256MB */ | |
| #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) | |
| #define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ | |
| #endif | |
| /*----------------------------------------------------------------------- | |
| * I2C | |
| *----------------------------------------------------------------------*/ | |
| #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ | |
| #undef CONFIG_SOFT_I2C /* I2C bit-banged */ | |
| #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ | |
| #define CFG_I2C_SLAVE 0x7F | |
| #define CFG_I2C_MULTI_EEPROMS | |
| #define CFG_I2C_EEPROM_ADDR (0xa8>>1) | |
| #define CFG_I2C_EEPROM_ADDR_LEN 1 | |
| #define CFG_EEPROM_PAGE_WRITE_ENABLE | |
| #define CFG_EEPROM_PAGE_WRITE_BITS 3 | |
| #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 | |
| /* I2C SYSMON (LM75, AD7414 is almost compatible) */ | |
| #define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ | |
| #define CONFIG_DTT_AD7414 1 /* use AD7414 */ | |
| #define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ | |
| #define CFG_DTT_MAX_TEMP 70 | |
| #define CFG_DTT_LOW_TEMP -30 | |
| #define CFG_DTT_HYSTERESIS 3 | |
| #define CONFIG_PREBOOT "echo;" \ | |
| "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ | |
| "echo" | |
| #undef CONFIG_BOOTARGS | |
| /* Setup some board specific values for the default environment variables */ | |
| #ifndef CONFIG_RAINIER | |
| #define CONFIG_HOSTNAME sequoia | |
| #define CFG_BOOTFILE "bootfile=/tftpboot/sequoia/uImage\0" | |
| #define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0" | |
| #else | |
| #define CONFIG_HOSTNAME rainier | |
| #define CFG_BOOTFILE "bootfile=/tftpboot/rainier/uImage\0" | |
| #define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0" | |
| #endif | |
| #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| CFG_BOOTFILE \ | |
| CFG_ROOTPATH \ | |
| "netdev=eth0\0" \ | |
| "nfsargs=setenv bootargs root=/dev/nfs rw " \ | |
| "nfsroot=${serverip}:${rootpath}\0" \ | |
| "ramargs=setenv bootargs root=/dev/ram rw\0" \ | |
| "addip=setenv bootargs ${bootargs} " \ | |
| "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ | |
| ":${hostname}:${netdev}:off panic=1\0" \ | |
| "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ | |
| "flash_nfs=run nfsargs addip addtty;" \ | |
| "bootm ${kernel_addr}\0" \ | |
| "flash_self=run ramargs addip addtty;" \ | |
| "bootm ${kernel_addr} ${ramdisk_addr}\0" \ | |
| "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ | |
| "bootm\0" \ | |
| "kernel_addr=FC000000\0" \ | |
| "ramdisk_addr=FC180000\0" \ | |
| "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \ | |
| "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \ | |
| "cp.b 200000 FFFA0000 60000\0" \ | |
| "upd=run load;run update\0" \ | |
| "" | |
| #define CONFIG_BOOTCOMMAND "run flash_self" | |
| #if 0 | |
| #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ | |
| #else | |
| #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ | |
| #endif | |
| #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
| #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ | |
| #define CONFIG_M88E1111_PHY 1 | |
| #define CONFIG_IBM_EMAC4_V4 1 | |
| #define CONFIG_MII 1 /* MII PHY management */ | |
| #define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ | |
| #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ | |
| #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ | |
| #define CONFIG_HAS_ETH0 | |
| #define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ | |
| #define CONFIG_NET_MULTI 1 | |
| #define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ | |
| #define CONFIG_PHY1_ADDR 1 | |
| /* USB */ | |
| #ifdef CONFIG_440EPX | |
| #define CONFIG_USB_OHCI_NEW | |
| #define CONFIG_USB_STORAGE | |
| #define CFG_OHCI_BE_CONTROLLER | |
| #undef CFG_USB_OHCI_BOARD_INIT | |
| #define CFG_USB_OHCI_CPU_INIT 1 | |
| #define CFG_USB_OHCI_REGS_BASE CFG_USB_HOST | |
| #define CFG_USB_OHCI_SLOT_NAME "ppc440" | |
| #define CFG_USB_OHCI_MAX_ROOT_PORTS 15 | |
| /* Comment this out to enable USB 1.1 device */ | |
| #define USB_2_0_DEVICE | |
| #endif /* CONFIG_440EPX */ | |
| /* Partitions */ | |
| #define CONFIG_MAC_PARTITION | |
| #define CONFIG_DOS_PARTITION | |
| #define CONFIG_ISO_PARTITION | |
| /* | |
| * BOOTP options | |
| */ | |
| #define CONFIG_BOOTP_BOOTFILESIZE | |
| #define CONFIG_BOOTP_BOOTPATH | |
| #define CONFIG_BOOTP_GATEWAY | |
| #define CONFIG_BOOTP_HOSTNAME | |
| #define CONFIG_BOOTP_SUBNETMASK | |
| /* | |
| * Command line configuration. | |
| */ | |
| #include <config_cmd_default.h> | |
| #define CONFIG_CMD_ASKENV | |
| #define CONFIG_CMD_DHCP | |
| #define CONFIG_CMD_DTT | |
| #define CONFIG_CMD_DIAG | |
| #define CONFIG_CMD_EEPROM | |
| #define CONFIG_CMD_ELF | |
| #define CONFIG_CMD_FAT | |
| #define CONFIG_CMD_I2C | |
| #define CONFIG_CMD_IRQ | |
| #define CONFIG_CMD_MII | |
| #define CONFIG_CMD_NAND | |
| #define CONFIG_CMD_NET | |
| #define CONFIG_CMD_NFS | |
| #define CONFIG_CMD_PCI | |
| #define CONFIG_CMD_PING | |
| #define CONFIG_CMD_REGINFO | |
| #define CONFIG_CMD_SDRAM | |
| #ifdef CONFIG_440EPX | |
| #define CONFIG_CMD_USB | |
| #endif | |
| #ifndef CONFIG_RAINIER | |
| #define CFG_POST_FPU_ON CFG_POST_FPU | |
| #else | |
| #define CFG_POST_FPU_ON 0 | |
| #endif | |
| /* POST support */ | |
| #define CONFIG_POST (CFG_POST_MEMORY | \ | |
| CFG_POST_CPU | \ | |
| CFG_POST_UART | \ | |
| CFG_POST_I2C | \ | |
| CFG_POST_CACHE | \ | |
| CFG_POST_FPU_ON | \ | |
| CFG_POST_ETHER | \ | |
| CFG_POST_SPR) | |
| #define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) | |
| #define CONFIG_LOGBUFFER | |
| #define CFG_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */ | |
| #define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ | |
| #define CONFIG_SUPPORT_VFAT | |
| /*----------------------------------------------------------------------- | |
| * Miscellaneous configurable options | |
| *----------------------------------------------------------------------*/ | |
| #define CFG_LONGHELP /* undef to save memory */ | |
| #define CFG_PROMPT "=> " /* Monitor Command Prompt */ | |
| #if defined(CONFIG_CMD_KGDB) | |
| #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| #else | |
| #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ | |
| #endif | |
| #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ | |
| #define CFG_MAXARGS 16 /* max number of command args */ | |
| #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ | |
| #define CFG_MEMTEST_START 0x0400000 /* memtest works on */ | |
| #define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ | |
| #define CFG_LOAD_ADDR 0x100000 /* default load address */ | |
| #define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ | |
| #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ | |
| #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ | |
| #define CONFIG_LOOPW 1 /* enable loopw command */ | |
| #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ | |
| #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ | |
| #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ | |
| /*----------------------------------------------------------------------- | |
| * PCI stuff | |
| *----------------------------------------------------------------------*/ | |
| /* General PCI */ | |
| #define CONFIG_PCI /* include pci support */ | |
| #define CONFIG_PCI_PNP /* do pci plug-and-play */ | |
| #define CFG_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */ | |
| #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ | |
| /* Board-specific PCI */ | |
| #define CFG_PCI_TARGET_INIT | |
| #define CFG_PCI_MASTER_INIT | |
| #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ | |
| #define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ | |
| /* | |
| * For booting Linux, the board info and command line data | |
| * have to be in the first 8 MB of memory, since this is | |
| * the maximum mapped by the Linux kernel during initialization. | |
| */ | |
| #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ | |
| /*----------------------------------------------------------------------- | |
| * External Bus Controller (EBC) Setup | |
| *----------------------------------------------------------------------*/ | |
| /* | |
| * On Sequoia CS0 and CS3 are switched when configuring for NAND booting | |
| */ | |
| #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) | |
| #define CFG_NAND_CS 3 /* NAND chip connected to CSx */ | |
| /* Memory Bank 0 (NOR-FLASH) initialization */ | |
| #define CFG_EBC_PB0AP 0x03017200 | |
| #define CFG_EBC_PB0CR (CFG_FLASH_BASE | 0xda000) | |
| /* Memory Bank 3 (NAND-FLASH) initialization */ | |
| #define CFG_EBC_PB3AP 0x018003c0 | |
| #define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000) | |
| #else | |
| #define CFG_NAND_CS 0 /* NAND chip connected to CSx */ | |
| /* Memory Bank 3 (NOR-FLASH) initialization */ | |
| #define CFG_EBC_PB3AP 0x03017200 | |
| #define CFG_EBC_PB3CR (CFG_FLASH_BASE | 0xda000) | |
| /* Memory Bank 0 (NAND-FLASH) initialization */ | |
| #define CFG_EBC_PB0AP 0x018003c0 | |
| #define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1c000) | |
| #endif | |
| /* Memory Bank 2 (CPLD) initialization */ | |
| #define CFG_EBC_PB2AP 0x24814580 | |
| #define CFG_EBC_PB2CR (CFG_BCSR_BASE | 0x38000) | |
| #define CFG_BCSR5_PCI66EN 0x80 | |
| /*----------------------------------------------------------------------- | |
| * NAND FLASH | |
| *----------------------------------------------------------------------*/ | |
| #define CFG_MAX_NAND_DEVICE 1 | |
| #define NAND_MAX_CHIPS 1 | |
| #define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS) | |
| #define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ | |
| /*----------------------------------------------------------------------- | |
| * PPC440 GPIO Configuration | |
| */ | |
| /* test-only: take GPIO init from pcs440ep ???? in config file */ | |
| #define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ | |
| { \ | |
| /* GPIO Core 0 */ \ | |
| {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ | |
| {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO14 */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO15 */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO16 GMCTxD(4) */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO17 GMCTxD(5) */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO18 GMCTxD(6) */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO19 GMCTxD(7) */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO23 SCPD0 */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO24 GMCTxD(2) */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO25 GMCTxD(3) */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \ | |
| {GPIO0_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO28 USB2D_TXVALID */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ | |
| {GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ | |
| }, \ | |
| { \ | |
| /* GPIO Core 1 */ \ | |
| {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \ | |
| {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \ | |
| {GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \ | |
| {GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \ | |
| {GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \ | |
| {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ | |
| } \ | |
| } | |
| /* | |
| * Internal Definitions | |
| * | |
| * Boot Flags | |
| */ | |
| #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ | |
| #define BOOTFLAG_WARM 0x02 /* Software reboot */ | |
| #if defined(CONFIG_CMD_KGDB) | |
| #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
| #endif | |
| /* pass open firmware flat tree */ | |
| #define CONFIG_OF_LIBFDT 1 | |
| #define CONFIG_OF_BOARD_SETUP 1 | |
| #endif /* __CONFIG_H */ |