|  | /* | 
|  | * Copyright (C) 2004-2006 Atmel Corporation | 
|  | * | 
|  | * See file CREDITS for list of people who contributed to this | 
|  | * project. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation; either version 2 of | 
|  | * the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
|  | * MA 02111-1307 USA | 
|  | */ | 
|  | #include <common.h> | 
|  |  | 
|  | #include <part.h> | 
|  | #include <mmc.h> | 
|  |  | 
|  | #include <asm/io.h> | 
|  | #include <asm/errno.h> | 
|  | #include <asm/byteorder.h> | 
|  | #include <asm/arch/clk.h> | 
|  | #include <asm/arch/memory-map.h> | 
|  |  | 
|  | #include "atmel_mci.h" | 
|  |  | 
|  | #ifdef DEBUG | 
|  | #define pr_debug(fmt, args...) printf(fmt, ##args) | 
|  | #else | 
|  | #define pr_debug(...) do { } while(0) | 
|  | #endif | 
|  |  | 
|  | #ifndef CFG_MMC_CLK_OD | 
|  | #define CFG_MMC_CLK_OD		150000 | 
|  | #endif | 
|  |  | 
|  | #ifndef CFG_MMC_CLK_PP | 
|  | #define CFG_MMC_CLK_PP		5000000 | 
|  | #endif | 
|  |  | 
|  | #ifndef CFG_MMC_OP_COND | 
|  | #define CFG_MMC_OP_COND		0x00100000 | 
|  | #endif | 
|  |  | 
|  | #define MMC_DEFAULT_BLKLEN	512 | 
|  | #define MMC_DEFAULT_RCA		1 | 
|  |  | 
|  | static unsigned int mmc_rca; | 
|  | static int mmc_card_is_sd; | 
|  | static block_dev_desc_t mmc_blkdev; | 
|  |  | 
|  | block_dev_desc_t *mmc_get_dev(int dev) | 
|  | { | 
|  | return &mmc_blkdev; | 
|  | } | 
|  |  | 
|  | static void mci_set_mode(unsigned long hz, unsigned long blklen) | 
|  | { | 
|  | unsigned long bus_hz; | 
|  | unsigned long clkdiv; | 
|  |  | 
|  | bus_hz = get_mci_clk_rate(); | 
|  | clkdiv = (bus_hz / hz) / 2 - 1; | 
|  |  | 
|  | pr_debug("mmc: setting clock %lu Hz, block size %lu\n", | 
|  | hz, blklen); | 
|  |  | 
|  | if (clkdiv & ~255UL) { | 
|  | clkdiv = 255; | 
|  | printf("mmc: clock %lu too low; setting CLKDIV to 255\n", | 
|  | hz); | 
|  | } | 
|  |  | 
|  | blklen &= 0xfffc; | 
|  | mmci_writel(MR, (MMCI_BF(CLKDIV, clkdiv) | 
|  | | MMCI_BF(BLKLEN, blklen) | 
|  | | MMCI_BIT(RDPROOF) | 
|  | | MMCI_BIT(WRPROOF))); | 
|  | } | 
|  |  | 
|  | #define RESP_NO_CRC	1 | 
|  | #define R1		MMCI_BF(RSPTYP, 1) | 
|  | #define R2		MMCI_BF(RSPTYP, 2) | 
|  | #define R3		(R1 | RESP_NO_CRC) | 
|  | #define R6		R1 | 
|  | #define NID		MMCI_BF(MAXLAT, 0) | 
|  | #define NCR		MMCI_BF(MAXLAT, 1) | 
|  | #define TRCMD_START	MMCI_BF(TRCMD, 1) | 
|  | #define TRDIR_READ	MMCI_BF(TRDIR, 1) | 
|  | #define TRTYP_BLOCK	MMCI_BF(TRTYP, 0) | 
|  | #define INIT_CMD	MMCI_BF(SPCMD, 1) | 
|  | #define OPEN_DRAIN	MMCI_BF(OPDCMD, 1) | 
|  |  | 
|  | #define ERROR_FLAGS	(MMCI_BIT(DTOE)			\ | 
|  | | MMCI_BIT(RDIRE)		\ | 
|  | | MMCI_BIT(RENDE)		\ | 
|  | | MMCI_BIT(RINDE)		\ | 
|  | | MMCI_BIT(RTOE)) | 
|  |  | 
|  | static int | 
|  | mmc_cmd(unsigned long cmd, unsigned long arg, | 
|  | void *resp, unsigned long flags) | 
|  | { | 
|  | unsigned long *response = resp; | 
|  | int i, response_words = 0; | 
|  | unsigned long error_flags; | 
|  | u32 status; | 
|  |  | 
|  | pr_debug("mmc: CMD%lu 0x%lx (flags 0x%lx)\n", | 
|  | cmd, arg, flags); | 
|  |  | 
|  | error_flags = ERROR_FLAGS; | 
|  | if (!(flags & RESP_NO_CRC)) | 
|  | error_flags |= MMCI_BIT(RCRCE); | 
|  |  | 
|  | flags &= ~MMCI_BF(CMDNB, ~0UL); | 
|  |  | 
|  | if (MMCI_BFEXT(RSPTYP, flags) == MMCI_RSPTYP_48_BIT_RESP) | 
|  | response_words = 1; | 
|  | else if (MMCI_BFEXT(RSPTYP, flags) == MMCI_RSPTYP_136_BIT_RESP) | 
|  | response_words = 4; | 
|  |  | 
|  | mmci_writel(ARGR, arg); | 
|  | mmci_writel(CMDR, cmd | flags); | 
|  | do { | 
|  | udelay(40); | 
|  | status = mmci_readl(SR); | 
|  | } while (!(status & MMCI_BIT(CMDRDY))); | 
|  |  | 
|  | pr_debug("mmc: status 0x%08lx\n", status); | 
|  |  | 
|  | if (status & error_flags) { | 
|  | printf("mmc: command %lu failed (status: 0x%08lx)\n", | 
|  | cmd, status); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (response_words) | 
|  | pr_debug("mmc: response:"); | 
|  |  | 
|  | for (i = 0; i < response_words; i++) { | 
|  | response[i] = mmci_readl(RSPR); | 
|  | pr_debug(" %08lx", response[i]); | 
|  | } | 
|  | pr_debug("\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mmc_acmd(unsigned long cmd, unsigned long arg, | 
|  | void *resp, unsigned long flags) | 
|  | { | 
|  | unsigned long aresp[4]; | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * Seems like the APP_CMD part of an ACMD has 64 cycles max | 
|  | * latency even though the ACMD part doesn't. This isn't | 
|  | * entirely clear in the SD Card spec, but some cards refuse | 
|  | * to work if we attempt to use 5 cycles max latency here... | 
|  | */ | 
|  | ret = mmc_cmd(MMC_CMD_APP_CMD, 0, aresp, | 
|  | R1 | NCR | (flags & OPEN_DRAIN)); | 
|  | if (ret) | 
|  | return ret; | 
|  | if ((aresp[0] & (R1_ILLEGAL_COMMAND | R1_APP_CMD)) != R1_APP_CMD) | 
|  | return -ENODEV; | 
|  |  | 
|  | ret = mmc_cmd(cmd, arg, resp, flags); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static unsigned long | 
|  | mmc_bread(int dev, unsigned long start, lbaint_t blkcnt, | 
|  | void *buffer) | 
|  | { | 
|  | int ret, i = 0; | 
|  | unsigned long resp[4]; | 
|  | unsigned long card_status, data; | 
|  | unsigned long wordcount; | 
|  | u32 *p = buffer; | 
|  | u32 status; | 
|  |  | 
|  | if (blkcnt == 0) | 
|  | return 0; | 
|  |  | 
|  | pr_debug("mmc_bread: dev %d, start %lx, blkcnt %lx\n", | 
|  | dev, start, blkcnt); | 
|  |  | 
|  | /* Put the device into Transfer state */ | 
|  | ret = mmc_cmd(MMC_CMD_SELECT_CARD, mmc_rca << 16, resp, R1 | NCR); | 
|  | if (ret) goto out; | 
|  |  | 
|  | /* Set block length */ | 
|  | ret = mmc_cmd(MMC_CMD_SET_BLOCKLEN, mmc_blkdev.blksz, resp, R1 | NCR); | 
|  | if (ret) goto out; | 
|  |  | 
|  | pr_debug("MCI_DTOR = %08lx\n", mmci_readl(DTOR)); | 
|  |  | 
|  | for (i = 0; i < blkcnt; i++, start++) { | 
|  | ret = mmc_cmd(MMC_CMD_READ_SINGLE_BLOCK, | 
|  | start * mmc_blkdev.blksz, resp, | 
|  | (R1 | NCR | TRCMD_START | TRDIR_READ | 
|  | | TRTYP_BLOCK)); | 
|  | if (ret) goto out; | 
|  |  | 
|  | ret = -EIO; | 
|  | wordcount = 0; | 
|  | do { | 
|  | do { | 
|  | status = mmci_readl(SR); | 
|  | if (status & (ERROR_FLAGS | MMCI_BIT(OVRE))) | 
|  | goto read_error; | 
|  | } while (!(status & MMCI_BIT(RXRDY))); | 
|  |  | 
|  | if (status & MMCI_BIT(RXRDY)) { | 
|  | data = mmci_readl(RDR); | 
|  | /* pr_debug("%x\n", data); */ | 
|  | *p++ = data; | 
|  | wordcount++; | 
|  | } | 
|  | } while(wordcount < (mmc_blkdev.blksz / 4)); | 
|  |  | 
|  | pr_debug("mmc: read %u words, waiting for BLKE\n", wordcount); | 
|  |  | 
|  | do { | 
|  | status = mmci_readl(SR); | 
|  | } while (!(status & MMCI_BIT(BLKE))); | 
|  |  | 
|  | putc('.'); | 
|  | } | 
|  |  | 
|  | out: | 
|  | /* Put the device back into Standby state */ | 
|  | mmc_cmd(MMC_CMD_SELECT_CARD, 0, resp, NCR); | 
|  | return i; | 
|  |  | 
|  | read_error: | 
|  | mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR); | 
|  | printf("mmc: bread failed, status = %08x, card status = %08x\n", | 
|  | status, card_status); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | static void mmc_parse_cid(struct mmc_cid *cid, unsigned long *resp) | 
|  | { | 
|  | cid->mid = resp[0] >> 24; | 
|  | cid->oid = (resp[0] >> 8) & 0xffff; | 
|  | cid->pnm[0] = resp[0]; | 
|  | cid->pnm[1] = resp[1] >> 24; | 
|  | cid->pnm[2] = resp[1] >> 16; | 
|  | cid->pnm[3] = resp[1] >> 8; | 
|  | cid->pnm[4] = resp[1]; | 
|  | cid->pnm[5] = resp[2] >> 24; | 
|  | cid->pnm[6] = 0; | 
|  | cid->prv = resp[2] >> 16; | 
|  | cid->psn = (resp[2] << 16) | (resp[3] >> 16); | 
|  | cid->mdt = resp[3] >> 8; | 
|  | } | 
|  |  | 
|  | static void sd_parse_cid(struct mmc_cid *cid, unsigned long *resp) | 
|  | { | 
|  | cid->mid = resp[0] >> 24; | 
|  | cid->oid = (resp[0] >> 8) & 0xffff; | 
|  | cid->pnm[0] = resp[0]; | 
|  | cid->pnm[1] = resp[1] >> 24; | 
|  | cid->pnm[2] = resp[1] >> 16; | 
|  | cid->pnm[3] = resp[1] >> 8; | 
|  | cid->pnm[4] = resp[1]; | 
|  | cid->pnm[5] = 0; | 
|  | cid->pnm[6] = 0; | 
|  | cid->prv = resp[2] >> 24; | 
|  | cid->psn = (resp[2] << 8) | (resp[3] >> 24); | 
|  | cid->mdt = (resp[3] >> 8) & 0x0fff; | 
|  | } | 
|  |  | 
|  | static void mmc_dump_cid(const struct mmc_cid *cid) | 
|  | { | 
|  | printf("Manufacturer ID:       %02lX\n", cid->mid); | 
|  | printf("OEM/Application ID:    %04lX\n", cid->oid); | 
|  | printf("Product name:          %s\n", cid->pnm); | 
|  | printf("Product Revision:      %lu.%lu\n", | 
|  | cid->prv >> 4, cid->prv & 0x0f); | 
|  | printf("Product Serial Number: %lu\n", cid->psn); | 
|  | printf("Manufacturing Date:    %02lu/%02lu\n", | 
|  | cid->mdt >> 4, cid->mdt & 0x0f); | 
|  | } | 
|  |  | 
|  | static void mmc_dump_csd(const struct mmc_csd *csd) | 
|  | { | 
|  | unsigned long *csd_raw = (unsigned long *)csd; | 
|  | printf("CSD data: %08lx %08lx %08lx %08lx\n", | 
|  | csd_raw[0], csd_raw[1], csd_raw[2], csd_raw[3]); | 
|  | printf("CSD structure version:   1.%u\n", csd->csd_structure); | 
|  | printf("MMC System Spec version: %u\n", csd->spec_vers); | 
|  | printf("Card command classes:    %03x\n", csd->ccc); | 
|  | printf("Read block length:       %u\n", 1 << csd->read_bl_len); | 
|  | if (csd->read_bl_partial) | 
|  | puts("Supports partial reads\n"); | 
|  | else | 
|  | puts("Does not support partial reads\n"); | 
|  | printf("Write block length:      %u\n", 1 << csd->write_bl_len); | 
|  | if (csd->write_bl_partial) | 
|  | puts("Supports partial writes\n"); | 
|  | else | 
|  | puts("Does not support partial writes\n"); | 
|  | if (csd->wp_grp_enable) | 
|  | printf("Supports group WP:      %u\n", csd->wp_grp_size + 1); | 
|  | else | 
|  | puts("Does not support group WP\n"); | 
|  | printf("Card capacity:		%u bytes\n", | 
|  | (csd->c_size + 1) * (1 << (csd->c_size_mult + 2)) * | 
|  | (1 << csd->read_bl_len)); | 
|  | printf("File format:            %u/%u\n", | 
|  | csd->file_format_grp, csd->file_format); | 
|  | puts("Write protection:        "); | 
|  | if (csd->perm_write_protect) | 
|  | puts(" permanent"); | 
|  | if (csd->tmp_write_protect) | 
|  | puts(" temporary"); | 
|  | putc('\n'); | 
|  | } | 
|  |  | 
|  | static int mmc_idle_cards(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | /* Reset and initialize all cards */ | 
|  | ret = mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, NULL, 0); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* Keep the bus idle for 74 clock cycles */ | 
|  | return mmc_cmd(0, 0, NULL, INIT_CMD); | 
|  | } | 
|  |  | 
|  | static int sd_init_card(struct mmc_cid *cid, int verbose) | 
|  | { | 
|  | unsigned long resp[4]; | 
|  | int i, ret = 0; | 
|  |  | 
|  | mmc_idle_cards(); | 
|  | for (i = 0; i < 1000; i++) { | 
|  | ret = mmc_acmd(MMC_ACMD_SD_SEND_OP_COND, CFG_MMC_OP_COND, | 
|  | resp, R3 | NID); | 
|  | if (ret || (resp[0] & 0x80000000)) | 
|  | break; | 
|  | ret = -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, resp, R2 | NID); | 
|  | if (ret) | 
|  | return ret; | 
|  | sd_parse_cid(cid, resp); | 
|  | if (verbose) | 
|  | mmc_dump_cid(cid); | 
|  |  | 
|  | /* Get RCA of the card that responded */ | 
|  | ret = mmc_cmd(MMC_CMD_SD_SEND_RELATIVE_ADDR, 0, resp, R6 | NCR); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | mmc_rca = resp[0] >> 16; | 
|  | if (verbose) | 
|  | printf("SD Card detected (RCA %u)\n", mmc_rca); | 
|  | mmc_card_is_sd = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mmc_init_card(struct mmc_cid *cid, int verbose) | 
|  | { | 
|  | unsigned long resp[4]; | 
|  | int i, ret = 0; | 
|  |  | 
|  | mmc_idle_cards(); | 
|  | for (i = 0; i < 1000; i++) { | 
|  | ret = mmc_cmd(MMC_CMD_SEND_OP_COND, CFG_MMC_OP_COND, resp, | 
|  | R3 | NID | OPEN_DRAIN); | 
|  | if (ret || (resp[0] & 0x80000000)) | 
|  | break; | 
|  | ret = -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* Get CID of all cards. FIXME: Support more than one card */ | 
|  | ret = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, resp, R2 | NID | OPEN_DRAIN); | 
|  | if (ret) | 
|  | return ret; | 
|  | mmc_parse_cid(cid, resp); | 
|  | if (verbose) | 
|  | mmc_dump_cid(cid); | 
|  |  | 
|  | /* Set Relative Address of the card that responded */ | 
|  | ret = mmc_cmd(MMC_CMD_SET_RELATIVE_ADDR, mmc_rca << 16, resp, | 
|  | R1 | NCR | OPEN_DRAIN); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void mci_set_data_timeout(struct mmc_csd *csd) | 
|  | { | 
|  | static const unsigned int dtomul_to_shift[] = { | 
|  | 0, 4, 7, 8, 10, 12, 16, 20, | 
|  | }; | 
|  | static const unsigned int taac_exp[] = { | 
|  | 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000, | 
|  | }; | 
|  | static const unsigned int taac_mant[] = { | 
|  | 0,  10, 12, 13, 15, 60, 25, 30, | 
|  | 35, 40, 45, 50, 55, 60, 70, 80, | 
|  | }; | 
|  | unsigned int timeout_ns, timeout_clks; | 
|  | unsigned int e, m; | 
|  | unsigned int dtocyc, dtomul; | 
|  | unsigned int shift; | 
|  | u32 dtor; | 
|  |  | 
|  | e = csd->taac & 0x07; | 
|  | m = (csd->taac >> 3) & 0x0f; | 
|  |  | 
|  | timeout_ns = (taac_exp[e] * taac_mant[m] + 9) / 10; | 
|  | timeout_clks = csd->nsac * 100; | 
|  |  | 
|  | timeout_clks += (((timeout_ns + 9) / 10) | 
|  | * ((CFG_MMC_CLK_PP + 99999) / 100000) + 9999) / 10000; | 
|  | if (!mmc_card_is_sd) | 
|  | timeout_clks *= 10; | 
|  | else | 
|  | timeout_clks *= 100; | 
|  |  | 
|  | dtocyc = timeout_clks; | 
|  | dtomul = 0; | 
|  | shift = 0; | 
|  | while (dtocyc > 15 && dtomul < 8) { | 
|  | dtomul++; | 
|  | shift = dtomul_to_shift[dtomul]; | 
|  | dtocyc = (timeout_clks + (1 << shift) - 1) >> shift; | 
|  | } | 
|  |  | 
|  | if (dtomul >= 8) { | 
|  | dtomul = 7; | 
|  | dtocyc = 15; | 
|  | puts("Warning: Using maximum data timeout\n"); | 
|  | } | 
|  |  | 
|  | dtor = (MMCI_BF(DTOMUL, dtomul) | 
|  | | MMCI_BF(DTOCYC, dtocyc)); | 
|  | mmci_writel(DTOR, dtor); | 
|  |  | 
|  | printf("mmc: Using %u cycles data timeout (DTOR=0x%x)\n", | 
|  | dtocyc << shift, dtor); | 
|  | } | 
|  |  | 
|  | int mmc_init(int verbose) | 
|  | { | 
|  | struct mmc_cid cid; | 
|  | struct mmc_csd csd; | 
|  | unsigned int max_blksz; | 
|  | int ret; | 
|  |  | 
|  | /* Initialize controller */ | 
|  | mmci_writel(CR, MMCI_BIT(SWRST)); | 
|  | mmci_writel(CR, MMCI_BIT(MCIEN)); | 
|  | mmci_writel(DTOR, 0x5f); | 
|  | mmci_writel(IDR, ~0UL); | 
|  | mci_set_mode(CFG_MMC_CLK_OD, MMC_DEFAULT_BLKLEN); | 
|  |  | 
|  | mmc_card_is_sd = 0; | 
|  |  | 
|  | ret = sd_init_card(&cid, verbose); | 
|  | if (ret) { | 
|  | mmc_rca = MMC_DEFAULT_RCA; | 
|  | ret = mmc_init_card(&cid, verbose); | 
|  | } | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* Get CSD from the card */ | 
|  | ret = mmc_cmd(MMC_CMD_SEND_CSD, mmc_rca << 16, &csd, R2 | NCR); | 
|  | if (ret) | 
|  | return ret; | 
|  | if (verbose) | 
|  | mmc_dump_csd(&csd); | 
|  |  | 
|  | mci_set_data_timeout(&csd); | 
|  |  | 
|  | /* Initialize the blockdev structure */ | 
|  | mmc_blkdev.if_type = IF_TYPE_MMC; | 
|  | mmc_blkdev.part_type = PART_TYPE_DOS; | 
|  | mmc_blkdev.block_read = mmc_bread; | 
|  | sprintf((char *)mmc_blkdev.vendor, | 
|  | "Man %02x%04x Snr %08x", | 
|  | cid.mid, cid.oid, cid.psn); | 
|  | strncpy((char *)mmc_blkdev.product, cid.pnm, | 
|  | sizeof(mmc_blkdev.product)); | 
|  | sprintf((char *)mmc_blkdev.revision, "%x %x", | 
|  | cid.prv >> 4, cid.prv & 0x0f); | 
|  |  | 
|  | /* | 
|  | * If we can't use 512 byte blocks, refuse to deal with the | 
|  | * card. Tons of code elsewhere seems to depend on this. | 
|  | */ | 
|  | max_blksz = 1 << csd.read_bl_len; | 
|  | if (max_blksz < 512 || (max_blksz > 512 && !csd.read_bl_partial)) { | 
|  | printf("Card does not support 512 byte reads, aborting.\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  | mmc_blkdev.blksz = 512; | 
|  | mmc_blkdev.lba = (csd.c_size + 1) * (1 << (csd.c_size_mult + 2)); | 
|  |  | 
|  | mci_set_mode(CFG_MMC_CLK_PP, mmc_blkdev.blksz); | 
|  |  | 
|  | #if 0 | 
|  | if (fat_register_device(&mmc_blkdev, 1)) | 
|  | printf("Could not register MMC fat device\n"); | 
|  | #else | 
|  | init_part(&mmc_blkdev); | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int mmc_read(ulong src, uchar *dst, int size) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | int mmc_write(uchar *src, ulong dst, int size) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | int mmc2info(ulong addr) | 
|  | { | 
|  | return 0; | 
|  | } |