| /* |
| * (C) Copyright 2008 - 2009 |
| * Windriver, <www.windriver.com> |
| * Tom Rix <Tom.Rix@windriver.com> |
| * |
| * Copyright 2011 Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
| * |
| * Copyright 2014 Linaro, Ltd. |
| * Rob Herring <robh@kernel.org> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <config.h> |
| #include <common.h> |
| #include <errno.h> |
| #include <malloc.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb/composite.h> |
| #include <linux/compiler.h> |
| #include <version.h> |
| #include <g_dnl.h> |
| #include <asm/arch/cpu.h> |
| #ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV |
| #include <fb_mmc.h> |
| #include <fb_storage.h> |
| #include <fb_fastboot.h> |
| #include <emmc_partitions.h> |
| #endif |
| #ifdef CONFIG_FASTBOOT_FLASH_NAND_DEV |
| #include <fb_nand.h> |
| #endif |
| #include <partition_table.h> |
| #include <android_image.h> |
| #include <image.h> |
| #ifdef CONFIG_AML_ANTIROLLBACK |
| #include <anti-rollback.h> |
| #endif |
| #include <zircon.h> |
| #include <zircon/hw/gpt.h> |
| #include <zircon_boot/zircon_boot.h> |
| |
| #include <efi_loader.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define FASTBOOT_VERSION "0.4" |
| |
| #define FASTBOOT_INTERFACE_CLASS 0xff |
| #define FASTBOOT_INTERFACE_SUB_CLASS 0x42 |
| #define FASTBOOT_INTERFACE_PROTOCOL 0x03 |
| |
| #define ENDPOINT_MAXIMUM_PACKET_SIZE_2_0 (0x0200) |
| |
| #ifdef CONFIG_DEVICE_PRODUCT |
| #define DEVICE_PRODUCT CONFIG_DEVICE_PRODUCT |
| #endif |
| |
| #define FB_ERR(fmt ...) printf("[ERR]%sL%d:", __func__, __LINE__),printf(fmt) |
| #define FB_MSG(fmt ...) printf("[MSG]"fmt) |
| #define FB_WRN(fmt ...) printf("[WRN]"fmt) |
| #define FB_DBG(...) |
| #define FB_HERE() printf("f(%s)L%d\n", __func__, __LINE__) |
| |
| extern void f_dwc_otg_pullup(int is_on); |
| |
| #ifdef CONFIG_BOOTLOADER_CONTROL_BLOCK |
| extern int is_partition_logical(const char *parition_name); |
| #endif |
| |
| /* The 64 defined bytes plus \0 */ |
| |
| #define EP_BUFFER_SIZE 4096 |
| |
| struct f_fastboot { |
| struct usb_function usb_function; |
| |
| /* IN/OUT EP's and corresponding requests */ |
| struct usb_ep *in_ep, *out_ep; |
| struct usb_request *in_req, *out_req; |
| }; |
| |
| static inline struct f_fastboot *func_to_fastboot(struct usb_function *f) |
| { |
| return container_of(f, struct f_fastboot, usb_function); |
| } |
| |
| static struct f_fastboot *fastboot_func; |
| static unsigned int download_size; |
| static unsigned int download_bytes; |
| |
| |
| static struct usb_endpoint_descriptor ep_in = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = ENDPOINT_MAXIMUM_PACKET_SIZE_2_0, |
| .bInterval = 0x00, |
| }; |
| |
| static struct usb_endpoint_descriptor ep_out = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = ENDPOINT_MAXIMUM_PACKET_SIZE_2_0, |
| .bInterval = 0x00, |
| }; |
| |
| static struct usb_interface_descriptor interface_desc = { |
| .bLength = USB_DT_INTERFACE_SIZE, |
| .bDescriptorType = USB_DT_INTERFACE, |
| .bInterfaceNumber = 0x00, |
| .bAlternateSetting = 0x00, |
| .bNumEndpoints = 0x02, |
| .bInterfaceClass = FASTBOOT_INTERFACE_CLASS, |
| .bInterfaceSubClass = FASTBOOT_INTERFACE_SUB_CLASS, |
| .bInterfaceProtocol = FASTBOOT_INTERFACE_PROTOCOL, |
| }; |
| |
| static struct usb_descriptor_header *fb_runtime_descs[] = { |
| (struct usb_descriptor_header *)&interface_desc, |
| (struct usb_descriptor_header *)&ep_in, |
| (struct usb_descriptor_header *)&ep_out, |
| NULL, |
| }; |
| |
| /* |
| * static strings, in UTF-8 |
| */ |
| static const char fastboot_name[] = "Android Fastboot"; |
| |
| static struct usb_string fastboot_string_defs[] = { |
| [0].s = fastboot_name, |
| { } /* end of list */ |
| }; |
| |
| static struct usb_gadget_strings stringtab_fastboot = { |
| .language = 0x0409, /* en-us */ |
| .strings = fastboot_string_defs, |
| }; |
| |
| static struct usb_gadget_strings *fastboot_strings[] = { |
| &stringtab_fastboot, |
| NULL, |
| }; |
| |
| #define DRAM_UBOOT_RESERVE 0x01000000 |
| unsigned int ddr_size_usable(unsigned int addr_start) |
| { |
| unsigned int ddr_size=0; |
| unsigned int free_size = 0; |
| int i; |
| |
| for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) |
| ddr_size += gd->bd->bi_dram[i].size; |
| |
| free_size = (ddr_size - DRAM_UBOOT_RESERVE - addr_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_MEM_TOP_HIDE); |
| #if defined CONFIG_FASTBOOT_MAX_DOWN_SIZE |
| if (free_size > CONFIG_FASTBOOT_MAX_DOWN_SIZE) |
| free_size = CONFIG_FASTBOOT_MAX_DOWN_SIZE; |
| #endif |
| return free_size; |
| } |
| |
| static void rx_handler_command(struct usb_ep *ep, struct usb_request *req); |
| |
| static char response_str[RESPONSE_LEN + 1]; |
| |
| void fastboot_fail(const char *s) |
| { |
| strncpy(response_str, "FAIL", 5); |
| if (s)strncat(response_str, s, RESPONSE_LEN - 4 - 1) ; |
| } |
| |
| void fastboot_okay(const char *s) |
| { |
| strncpy(response_str, "OKAY", 5); |
| if (s)strncat(response_str, s, RESPONSE_LEN - 4 - 1) ; |
| } |
| |
| void fastboot_busy(const char* s) |
| { |
| strncpy(response_str, "INFO", 4 + 1);//add terminated 0 |
| if (s)strncat(response_str, s, RESPONSE_LEN - 4 - 1) ; |
| } |
| int fastboot_is_busy(void) |
| { |
| return !strncmp("INFO", response_str, strlen("INFO")); |
| } |
| |
| //cb for bulk in_req->complete |
| static void fastboot_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| int status = req->status; |
| |
| if ( fastboot_is_busy() && fastboot_func) { |
| struct usb_ep* out_ep = fastboot_func->out_ep; |
| struct usb_request* out_req = fastboot_func->out_req; |
| rx_handler_command(out_ep, out_req); |
| return; |
| } |
| if (!status) |
| return; |
| printf("status: %d ep '%s' trans: %d\n", status, ep->name, req->actual); |
| } |
| |
| static int fastboot_bind(struct usb_configuration *c, struct usb_function *f) |
| { |
| int id; |
| struct usb_gadget *gadget = c->cdev->gadget; |
| struct f_fastboot *f_fb = func_to_fastboot(f); |
| |
| /* DYNAMIC interface numbers assignments */ |
| id = usb_interface_id(c, f); |
| if (id < 0) |
| return id; |
| interface_desc.bInterfaceNumber = id; |
| |
| id = usb_string_id(c->cdev); |
| if (id < 0) |
| return id; |
| fastboot_string_defs[0].id = id; |
| interface_desc.iInterface = id; |
| |
| f_fb->in_ep = usb_ep_autoconfig(gadget, &ep_in); |
| if (!f_fb->in_ep) |
| return -ENODEV; |
| f_fb->in_ep->driver_data = c->cdev; |
| |
| f_fb->out_ep = usb_ep_autoconfig(gadget, &ep_out); |
| if (!f_fb->out_ep) |
| return -ENODEV; |
| f_fb->out_ep->driver_data = c->cdev; |
| |
| return 0; |
| } |
| |
| static void fastboot_unbind(struct usb_configuration *c, struct usb_function *f) |
| { |
| memset(fastboot_func, 0, sizeof(*fastboot_func)); |
| } |
| |
| static void fastboot_disable(struct usb_function *f) |
| { |
| struct f_fastboot *f_fb = func_to_fastboot(f); |
| |
| usb_ep_disable(f_fb->out_ep); |
| usb_ep_disable(f_fb->in_ep); |
| |
| if (f_fb->out_req) { |
| free(f_fb->out_req->buf); |
| usb_ep_free_request(f_fb->out_ep, f_fb->out_req); |
| f_fb->out_req = NULL; |
| } |
| if (f_fb->in_req) { |
| free(f_fb->in_req->buf); |
| usb_ep_free_request(f_fb->in_ep, f_fb->in_req); |
| f_fb->in_req = NULL; |
| } |
| } |
| |
| static struct usb_request *fastboot_start_ep(struct usb_ep *ep) |
| { |
| struct usb_request *req; |
| |
| req = usb_ep_alloc_request(ep, 0); |
| if (!req) |
| return NULL; |
| |
| req->length = EP_BUFFER_SIZE; |
| req->buf = memalign(CONFIG_SYS_CACHELINE_SIZE, EP_BUFFER_SIZE); |
| if (!req->buf) { |
| usb_ep_free_request(ep, req); |
| return NULL; |
| } |
| |
| memset(req->buf, 0, req->length); |
| return req; |
| } |
| |
| static int fastboot_set_alt(struct usb_function *f, |
| unsigned interface, unsigned alt) |
| { |
| int ret; |
| struct f_fastboot *f_fb = func_to_fastboot(f); |
| |
| debug("%s: func: %s intf: %d alt: %d\n", |
| __func__, f->name, interface, alt); |
| |
| /* make sure we don't enable the ep twice */ |
| ret = usb_ep_enable(f_fb->out_ep, &ep_out); |
| if (ret) { |
| puts("failed to enable out ep\n"); |
| return ret; |
| } |
| |
| f_fb->out_req = fastboot_start_ep(f_fb->out_ep); |
| if (!f_fb->out_req) { |
| puts("failed to alloc out req\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| f_fb->out_req->complete = rx_handler_command; |
| |
| ret = usb_ep_enable(f_fb->in_ep, &ep_in); |
| if (ret) { |
| puts("failed to enable in ep\n"); |
| goto err; |
| } |
| |
| f_fb->in_req = fastboot_start_ep(f_fb->in_ep); |
| if (!f_fb->in_req) { |
| puts("failed alloc req in\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| f_fb->in_req->complete = fastboot_complete; |
| |
| ret = usb_ep_queue(f_fb->out_ep, f_fb->out_req, 0); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| fastboot_disable(f); |
| return ret; |
| } |
| |
| static int fastboot_setup(struct usb_function *f, |
| const struct usb_ctrlrequest *ctrl) |
| { |
| int value = -EOPNOTSUPP; |
| struct f_fastboot *f_fb = func_to_fastboot(f); |
| |
| /* composite driver infrastructure handles everything; interface |
| * activation uses set_alt(). |
| */ |
| if (((ctrl->bRequestType & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) |
| && (ctrl->bRequest == USB_REQ_CLEAR_FEATURE) |
| && (ctrl->wValue== USB_ENDPOINT_HALT)) { |
| switch (ctrl->wIndex & 0xfe) { |
| case USB_DIR_OUT: |
| value = ctrl->wLength; |
| usb_ep_clear_halt(f_fb->out_ep); |
| break; |
| |
| case USB_DIR_IN: |
| value = ctrl->wLength; |
| usb_ep_clear_halt(f_fb->in_ep); |
| break; |
| default: |
| printf("unknown usb_ctrlrequest\n"); |
| break; |
| } |
| } |
| |
| return value; |
| } |
| |
| static int fastboot_add(struct usb_configuration *c) |
| { |
| struct f_fastboot *f_fb; |
| int status; |
| |
| if (fastboot_func == NULL) { |
| f_fb = memalign(CONFIG_SYS_CACHELINE_SIZE, sizeof(*f_fb)); |
| if (!f_fb) |
| return -ENOMEM; |
| |
| fastboot_func = f_fb; |
| memset(f_fb, 0, sizeof(*f_fb)); |
| } else { |
| f_fb = fastboot_func; |
| } |
| |
| f_fb->usb_function.name = "f_fastboot"; |
| f_fb->usb_function.hs_descriptors = fb_runtime_descs; |
| f_fb->usb_function.bind = fastboot_bind; |
| f_fb->usb_function.unbind = fastboot_unbind; |
| f_fb->usb_function.set_alt = fastboot_set_alt; |
| f_fb->usb_function.disable = fastboot_disable; |
| f_fb->usb_function.strings = fastboot_strings; |
| f_fb->usb_function.setup = fastboot_setup; |
| |
| status = usb_add_function(c, &f_fb->usb_function); |
| if (status) { |
| free(f_fb); |
| fastboot_func = NULL; |
| } |
| |
| return status; |
| } |
| DECLARE_GADGET_BIND_CALLBACK(usb_dnl_fastboot, fastboot_add); |
| |
| static int fastboot_tx_write(const char *buffer, unsigned int buffer_size) |
| { |
| struct usb_request *in_req = fastboot_func->in_req; |
| int ret; |
| |
| memcpy(in_req->buf, buffer, buffer_size); |
| in_req->length = buffer_size; |
| ret = usb_ep_queue(fastboot_func->in_ep, in_req, 0); |
| if (ret) |
| printf("Error %d on queue\n", ret); |
| return 0; |
| } |
| |
| static int fastboot_tx_write_str(const char *buffer) |
| { |
| return fastboot_tx_write(buffer, strlen(buffer)); |
| } |
| |
| static void compl_do_reboot(struct usb_ep *ep, struct usb_request *req) |
| { |
| run_command("reboot", 0); |
| } |
| |
| static void compl_do_reboot_bootloader(struct usb_ep *ep, struct usb_request *req) |
| { |
| if (dynamic_partition) |
| run_command("reboot bootloader", 0); |
| else |
| run_command("reboot fastboot", 0); |
| } |
| |
| static void compl_do_reboot_recovery(struct usb_ep *ep, |
| struct usb_request *req) |
| { |
| run_command("reboot recovery", 0); |
| } |
| |
| static int strcmp_l1(const char *s1, const char *s2) |
| { |
| if (!s1 || !s2) { |
| return -1; |
| } |
| return strncmp(s1, s2, strlen(s1)); |
| } |
| |
| enum fastboot_locked_access { |
| NONE = 0, |
| WRITE = 1 << 0, |
| ERASE = 1 << 1, |
| }; |
| |
| struct partition_info_t { |
| const char *name; |
| const char *alias; // Partition alias or NULL for none. |
| uint8_t access; // Fastboot access level when locked. |
| }; |
| |
| static const struct partition_info_t partition_info[] = { |
| // clang-format off |
| { GUID_BOOTLOADER_NAME, NULL, WRITE | ERASE }, |
| { GPT_ZIRCON_A_NAME, "boot_a", WRITE | ERASE }, |
| { GPT_ZIRCON_B_NAME, "boot_b", WRITE | ERASE }, |
| { GPT_ZIRCON_R_NAME, "boot_r", WRITE | ERASE }, |
| { GPT_VBMETA_A_NAME, NULL, WRITE | ERASE }, |
| { GPT_VBMETA_B_NAME, NULL, WRITE | ERASE }, |
| { GPT_VBMETA_R_NAME, NULL, WRITE | ERASE }, |
| // For Fuchsia the super partition doesn't use Android super format |
| // but is just the FVM. |
| { GPT_FVM_NAME, "super", WRITE | ERASE }, |
| { GPT_DURABLE_BOOT_NAME, "misc", ERASE }, |
| // Upstream code also aliases userdata -> data and dts -> dtb, but we |
| // don't need these at the moment. |
| // clang-format on |
| }; |
| |
| static uint8_t get_fastboot_lock_access(const char *part) |
| { |
| for (size_t i = 0; i < ARRAY_SIZE(partition_info); i++) { |
| if (strcmp(part, partition_info[i].name) == 0) { |
| return partition_info[i].access; |
| } |
| } |
| return NONE; |
| } |
| |
| // Returns the real partition name for the given alias. |
| // |
| // We sometimes want to support flashing tools that have different expectations |
| // around partition names. This maps all supported partition names and aliases |
| // into the actual partition name. |
| // |
| // Returns NULL if the partition does not exist either in the GPT or the |
| // known partition list. |
| static const char *get_real_part_name(char *part) |
| { |
| // If the partition exists in the GPT, it's the real name. |
| if (find_mmc_partition_by_name(part)) { |
| return part; |
| } |
| |
| // Otherwise, try to find it in the known partition list. |
| // |
| // If a partition exists in the list we always allow it without checking |
| // the GPT. This is to support virtual partitions e.g. "bootloader" |
| // which aren't actually in the GPT, but it's still up to the caller to |
| // handle the resulting partition properly. |
| for (size_t i = 0; i < ARRAY_SIZE(partition_info); i++) { |
| const struct partition_info_t *info = &partition_info[i]; |
| |
| if (strcmp(info->name, part) == 0) { |
| return part; |
| } |
| |
| if (info->alias && strcmp(part, info->alias) == 0) { |
| printf("Partition alias: %s -> %s\n", part, info->name); |
| return info->name; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| // Returns true if `c` is a valid slot character (a, b, r). |
| static bool is_slot_char(char c) |
| { |
| return c == 'a' || c == 'b' || c == 'r'; |
| } |
| |
| // Parses a partition name out of a fastboot command. |
| // |
| // On input `cmd` should be the command and partition name, e.g. "flash:foo". |
| // This string will be modified in-place, but the returned string may or may |
| // not point to this buffer. |
| // |
| // The returned string: |
| // * skips the leading command and colon |
| // * removes any partition double-slotting |
| // * calls `get_real_part_name()` to resolve aliases |
| // |
| // Double-slotted partitions (e.g. `zircon_a_a`) will drop the latter slot. This |
| // can happen when Fuchsia tooling explicitly provides a slot to fastboot via |
| // `fastboot flash <part>_a`, because fastboot itself will then query whether |
| // the partition is slotted and append another slot suffix if so. |
| // |
| // We may at some point want to fix fastboot to not append a suffix if the |
| // partition is already slotted, but working around it here is easier for now. |
| // |
| // On failure, this updates the fastboot TX buffer with a failure message and |
| // returns NULL. |
| static const char *parse_fb_cmd_partition(char *cmd) |
| { |
| strsep(&cmd, ":"); |
| if (cmd == NULL) { |
| fastboot_tx_write_str("FAILmissing partition name"); |
| return NULL; |
| } |
| |
| // Check for a double-slotted partition. In this case we want to drop |
| // the fastboot-appended suffix in favor of the suffix explicitly given |
| // by the user. |
| int part_len = strlen(cmd); |
| if (part_len > 4) { |
| char *suffix = &cmd[part_len - 4]; |
| if (suffix[0] == '_' && is_slot_char(suffix[1]) && |
| suffix[2] == '_' && is_slot_char(suffix[3])) { |
| printf("Partition slot fix: %s -> ", cmd); |
| suffix[2] = '\0'; |
| printf("%s\n", cmd); |
| } |
| } |
| |
| const char *part = get_real_part_name(cmd); |
| if (part == NULL) { |
| fastboot_tx_write_str("FAILunknown partition"); |
| return NULL; |
| } |
| |
| return part; |
| } |
| |
| static void cb_reboot(struct usb_ep *ep, struct usb_request *req) |
| { |
| char *cmd = req->buf; |
| if (!strcmp("reboot", cmd)) { |
| fastboot_func->in_req->complete = compl_do_reboot; |
| fastboot_tx_write_str("OKAY"); |
| } else if (!strcmp("reboot-bootloader", cmd)) { |
| fastboot_func->in_req->complete = compl_do_reboot_bootloader; |
| fastboot_tx_write_str("OKAY"); |
| } else if (!strcmp("reboot-recovery", cmd)) { |
| fastboot_func->in_req->complete = compl_do_reboot_recovery; |
| fastboot_tx_write_str("OKAY"); |
| } else if (!strcmp("reboot-fastboot", cmd)) { |
| // TODO(b/285184591) support userspace flashing for "super"? |
| fastboot_tx_write_str("FAILuserspace fastboot unsupported"); |
| } else { |
| fastboot_tx_write_str("FAILunknown reboot command"); |
| } |
| } |
| |
| void dump_lock_info(LockData_t* info) |
| { |
| printf("info->version_major = %d\n", info->version_major); |
| printf("info->version_minor = %d\n", info->version_minor); |
| printf("info->lock_state = %d\n", info->lock_state); |
| printf("info->lock_critical_state = %d\n", info->lock_critical_state); |
| printf("info->lock_bootloader = %d\n", info->lock_bootloader); |
| } |
| |
| |
| static int check_lock(void) |
| { |
| char *lock_s; |
| LockData_t* info; |
| |
| lock_s = getenv("lock"); |
| if (!lock_s) { |
| printf("lock state is NULL \n"); |
| lock_s = "10000000"; |
| setenv("lock", "10000000"); |
| run_command("defenv_reserv; saveenv;", 0); |
| } |
| FB_DBG("lock state: %s\n", lock_s); |
| |
| info = malloc(sizeof(struct LockData)); |
| if (info) { |
| memset(info,0,LOCK_DATA_SIZE); |
| info->version_major = (int)(lock_s[0] - '0'); |
| info->version_minor = (int)(lock_s[1] - '0'); |
| info->lock_state = (int)(lock_s[4] - '0'); |
| info->lock_critical_state = (int)(lock_s[5] - '0'); |
| info->lock_bootloader = (int)(lock_s[6] - '0'); |
| |
| dump_lock_info(info); |
| } else |
| return 0; |
| |
| if ((info->lock_state == 1 ) || ( info->lock_critical_state == 1 )) { |
| free (info); |
| return 1; |
| } |
| else { |
| free (info); |
| return 0; |
| } |
| } |
| |
| static const char* getvar_list[] = { |
| "version-baseband", "version-bootloader", "version", "hw-revision", "max-download-size", |
| "serialno", "product", "off-mode-charge", "variant", "battery-soc-ok", |
| "battery-voltage", "partition-type:boot", "partition-size:boot", |
| "partition-type:system", "partition-size:system", "partition-type:vendor", "partition-size:vendor", |
| "partition-type:odm", "partition-size:odm", "partition-type:data", "partition-size:data", |
| "erase-block-size", "logical-block-size", "secure", "unlocked", |
| }; |
| |
| static const char* getvar_list_dynamic[] = { |
| "hw-revision", "battery-voltage", "is-userspace", "is-logical:data", |
| "is-logical:metadata", "is-logical:misc", "is-logical:super", "is-logical:boot", |
| "is-logical:system", "is-logical:vendor", "is-logical:product", "is-logical:odm", |
| "slot-count", "max-download-size", "serialno", "product", "unlocked", "has-slot:data", |
| "has-slot:metadata", "has-slot:misc", "has-slot:super", "has-slot:boot", |
| "has-slot:system", "has-slot:vendor", "has-slot:product", "has-slot:odm", |
| "secure", "super-partition-name", "version-baseband", "version-bootloader", |
| "partition-size:boot", "partition-size:metadata", "partition-size:misc", |
| "partition-size:super", "partition-size:data", "version", |
| }; |
| |
| static const char *getvar_list_ab[] = { |
| "current-slot", |
| "has-slot:" GPT_DURABLE_BOOT_NAME, |
| "has-slot:" GPT_FVM_NAME, |
| // `has-slot` queries the generic base name without any slot suffix. |
| "has-slot:vbmeta", |
| "has-slot:zircon", |
| "hw-revision", |
| "is-userspace", |
| "max-download-size", |
| "partition-size:" GPT_DURABLE_BOOT_NAME, |
| "partition-size:" GPT_FVM_NAME, |
| "partition-size:" GPT_VBMETA_A_NAME, |
| "partition-size:" GPT_VBMETA_B_NAME, |
| "partition-size:" GPT_VBMETA_R_NAME, |
| "partition-size:" GPT_ZIRCON_A_NAME, |
| "partition-size:" GPT_ZIRCON_B_NAME, |
| "partition-size:" GPT_ZIRCON_R_NAME, |
| "product", |
| "serialno", |
| "slot-count", |
| "slot-last-set-active", |
| "slot-retry-count:a", |
| "slot-retry-count:b", |
| "slot-successful:a", |
| "slot-successful:b", |
| "slot-suffixes", |
| "slot-unbootable:a", |
| "slot-unbootable:b", |
| "version", |
| "version-bootloader", |
| "vx-locked", |
| "vx-unlockable", |
| }; |
| |
| extern ZirconBootOps zb_ops; |
| |
| // Returns slot info for the given slot string "a" or "b", or NULL on failure. |
| // The returned struct is only valid until the next call to this function. |
| static AbrSlotInfo* get_slot_info(const char *suffix) |
| { |
| AbrSlotIndex slot_index; |
| if (strcmp(suffix, "a") == 0) { |
| slot_index = kAbrSlotIndexA; |
| } else if (strcmp(suffix, "b") == 0) { |
| slot_index = kAbrSlotIndexB; |
| } else { |
| return NULL; |
| } |
| |
| static AbrSlotInfo slot_info; |
| AbrOps ops = GetAbrOpsFromZirconBootOps(&zb_ops); |
| if (AbrGetSlotInfo(&ops, slot_index, &slot_info) != kAbrResultOk) { |
| return NULL; |
| } |
| |
| return &slot_info; |
| } |
| |
| static void cb_getvar(struct usb_ep *ep, struct usb_request *req) |
| { |
| char *cmd = req->buf; |
| char cmdBuf[RESPONSE_LEN]; |
| char* response = response_str; |
| char *s1; |
| size_t chars_left; |
| |
| strcpy(response, "OKAY"); |
| chars_left = sizeof(response_str) - strlen(response) - 1; |
| |
| memcpy(cmdBuf, cmd, strnlen(cmd, RESPONSE_LEN-1)+1); |
| cmd = cmdBuf; |
| strsep(&cmd, ":"); |
| FB_DBG("cb_getvar: %s\n", cmd); |
| if (!cmd) { |
| error("missing variable\n"); |
| fastboot_tx_write_str("FAILmissing var"); |
| return; |
| } |
| if (!strncmp(cmd, "all", 3)) { |
| static int cmdIndex = 0; |
| int getvar_num = 0; |
| if (has_boot_slot == 1 && strlen(getvar_list_ab[cmdIndex]) < 64) { |
| strcpy(cmd, getvar_list_ab[cmdIndex]); |
| getvar_num = (sizeof(getvar_list_ab) / sizeof(getvar_list_ab[0])); |
| } else if (dynamic_partition && strlen(getvar_list_dynamic[cmdIndex]) < 64) { |
| strcpy(cmd, getvar_list_dynamic[cmdIndex]);//only support no-arg cmd |
| getvar_num = (sizeof(getvar_list_dynamic) / sizeof(getvar_list_dynamic[0])); |
| } else if (strlen(getvar_list[cmdIndex]) < 64) { |
| strcpy(cmd, getvar_list[cmdIndex]);//only support no-arg cmd |
| getvar_num = (sizeof(getvar_list) / sizeof(getvar_list[0])); |
| } |
| FB_DBG("getvar_num: %d\n", getvar_num); |
| if (++cmdIndex > getvar_num) { |
| // Reset the index for the next `getvar all` and return |
| // the final empty OKAY response to end the transaction. |
| cmdIndex = 0; |
| fastboot_tx_write_str(response); |
| return; |
| } |
| fastboot_busy(NULL); |
| FB_DBG("all cmd:%s\n", cmd); |
| strncat(response, cmd, chars_left); |
| strncat(response, ": ", 2); |
| chars_left -= strlen(cmd) + 1; |
| } |
| |
| if (!strcmp_l1("version-baseband", cmd)) { |
| strncat(response, "N/A", chars_left); |
| } else if (!strcmp_l1("version-bootloader", cmd) || |
| !strcmp_l1("bootloader-version", cmd)) { |
| strncat(response, U_BOOT_VERSION, chars_left); |
| } else if (!strcmp_l1("hw-revision", cmd)) { |
| strncat(response, "vim3", chars_left); |
| } else if (!strcmp_l1("version", cmd)) { |
| strncat(response, FASTBOOT_VERSION, chars_left); |
| } else if (!strcmp_l1("off-mode-charge", cmd)) { |
| strncat(response, "0", chars_left); |
| } else if (!strcmp_l1("variant", cmd)) { |
| strncat(response, "US", chars_left); |
| } else if (!strcmp_l1("battery-soc-ok", cmd)) { |
| strncat(response, "yes", chars_left); |
| } else if (!strcmp_l1("battery-voltage", cmd)) { |
| strncat(response, "4", chars_left); |
| } else if (!strcmp_l1("is-userspace", cmd)) { |
| strncat(response, "no", chars_left); |
| } else if (!strcmp_l1("is-logical", cmd)) { |
| strsep(&cmd, ":"); |
| printf("partition is %s\n", cmd); |
| if (!dynamic_partition) { |
| strncat(response, "no", chars_left); |
| } else { |
| #ifdef CONFIG_BOOTLOADER_CONTROL_BLOCK |
| if (is_partition_logical(cmd) == 0) { |
| error("%s is logic partition\n", cmd); |
| strncat(response, "yes", chars_left); |
| } else { |
| strncat(response, "no", chars_left); |
| } |
| #else |
| strncat(response, "no", chars_left); |
| #endif |
| } |
| } else if (!strcmp_l1("super-partition-name", cmd)) { |
| char *slot_name; |
| slot_name = getenv("slot-suffixes"); |
| if (has_boot_slot == 0) { |
| strncat(response, "super", chars_left); |
| } else { |
| printf("slot-suffixes: %s\n", slot_name); |
| if (strcmp(slot_name, "0") == 0) { |
| printf("active_slot is %s\n", "a"); |
| strncat(response, "super_a", chars_left); |
| } else if (strcmp(slot_name, "1") == 0) { |
| printf("active_slot is %s\n", "b"); |
| strncat(response, "super_b", chars_left); |
| } |
| } |
| } else if (!strcmp_l1("downloadsize", cmd) || |
| !strcmp_l1("max-download-size", cmd)) { |
| char str_num[12]; |
| |
| sprintf(str_num, "0x%08x", ddr_size_usable(CONFIG_USB_FASTBOOT_BUF_ADDR)); |
| strncat(response, str_num, chars_left); |
| } else if (!strcmp_l1("serialno", cmd)) { |
| // The reported serialno must be the same as what was registered |
| // in the USB descriptor iSerial field, since that's how |
| // fastboot discovers devices. |
| strncat(response, g_dnl_get_serialnumber(), chars_left); |
| } else if (!strcmp_l1("product", cmd)) { |
| #ifdef DEVICE_PRODUCT |
| s1 = DEVICE_PRODUCT; |
| FB_DBG("DEVICE_PRODUCT: %s\n", s1); |
| #else |
| s1 = getenv("device_product"); |
| FB_DBG("device_product: %s\n", s1); |
| #endif |
| strncat(response, s1, chars_left); |
| } else if (!strcmp_l1("slot-count", cmd)) { |
| strncat(response, "2", chars_left); |
| } else if (!strcmp_l1("slot-suffixes", cmd)) { |
| strncat(response, "a,b", chars_left); |
| } else if (!strcmp_l1("current-slot", cmd)) { |
| AbrOps ops = GetAbrOpsFromZirconBootOps(&zb_ops); |
| const char *slot = |
| AbrGetSlotSuffix(AbrGetBootSlot(&ops, false, NULL)); |
| if (slot) { |
| strncat(response, slot + 1, chars_left); |
| FB_DBG("current-slot: %s\n", slot); |
| } |
| } else if (!strcmp_l1("slot-last-set-active", cmd)) { |
| AbrOps ops = GetAbrOpsFromZirconBootOps(&zb_ops); |
| AbrSlotIndex slot_index; |
| if (AbrGetSlotLastMarkedActive(&ops, &slot_index) != |
| kAbrResultOk) { |
| fastboot_fail("Failed to fetch last active slot"); |
| } else { |
| const char *slot = AbrGetSlotSuffix(slot_index); |
| strncat(response, slot + 1, chars_left); |
| } |
| } else if (!strcmp_l1("has-slot:", cmd)) { |
| // Can't use `parse_fb_cmd_partition()` here because the |
| // given name is unslotted which might not exist, e.g |
| // "zircon" as opposed to "zircon_a". |
| strsep(&cmd, ":"); |
| if (!cmd) { |
| fastboot_tx_write_str("FAILmissing partition name"); |
| return; |
| } |
| |
| char slotted_part[36]; |
| snprintf(slotted_part, sizeof(slotted_part), "%s_a", cmd); |
| if (get_real_part_name(slotted_part)) { |
| // If <part>_a exists then <part> supports slots. |
| strncat(response, "yes", chars_left); |
| } else if (get_real_part_name(cmd)) { |
| // If only <part> exists it does not support slots. |
| strncat(response, "no", chars_left); |
| } else { |
| // If neither exists it's an unknown partition. |
| fastboot_tx_write_str("FAILunknown partition"); |
| return; |
| } |
| } else if (!strncmp("partition-size", cmd, strlen("partition-size"))) { |
| char str_num[20]; |
| struct partitions *pPartition; |
| uint64_t sz; |
| |
| const char *part = parse_fb_cmd_partition(cmd); |
| if (!part) { |
| return; |
| } |
| |
| if (!strncmp("mbr", part, strlen("mbr"))) { |
| strcpy(response, "FAILVariable not implemented"); |
| } else { |
| if (!strcmp("bootloader", part)) { |
| // boot0 and boot1 have the same size. |
| mmc_boot_size("boot0", &sz); |
| FB_DBG("size:%016llx\n", sz); |
| sprintf(str_num, "%016llx", sz); |
| } else { |
| pPartition = find_mmc_partition_by_name(part); |
| if (pPartition) { |
| FB_DBG("size:%016llx\n", pPartition->size); |
| if (strcmp(part, "data") == 0) { |
| FB_DBG("reserve 0x4000 for fde data\n"); |
| sz = pPartition->size - 0x4000; |
| FB_DBG("data size :%016llx\n", sz); |
| sprintf(str_num, "%016llx", sz); |
| } else { |
| sprintf(str_num, "%016llx", pPartition->size); |
| } |
| } else { |
| FB_DBG("find_mmc_partition_by_name fail\n"); |
| sprintf(str_num, "get fail"); |
| } |
| } |
| strncat(response, str_num, chars_left); |
| } |
| } else if (!strcmp_l1("partition-type:cache", cmd)) { |
| if (has_boot_slot == 0) { |
| strncat(response, "ext4", chars_left); |
| } |
| } else if (!strcmp_l1("partition-type:data", cmd)) { |
| strncat(response, "ext4", chars_left); |
| } else if (!strcmp_l1("partition-type:userdata", cmd)) { |
| strncat(response, "ext4", chars_left); |
| } else if (!strcmp_l1("partition-type:system", cmd)) { |
| strncat(response, "ext4", chars_left); |
| } else if (!strcmp_l1("partition-type:vendor", cmd)) { |
| strncat(response, "ext4", chars_left); |
| } else if (!strcmp_l1("partition-type:odm", cmd)) { |
| strncat(response, "ext4", chars_left); |
| } else if (!strcmp_l1("partition-type:tee", cmd)) { |
| strncat(response, "ext4", chars_left); |
| } else if (!strcmp_l1("partition-type:param", cmd)) { |
| strncat(response, "ext4", chars_left); |
| } else if (!strcmp_l1("partition-type:product", cmd)) { |
| strncat(response, "ext4", chars_left); |
| } else if (!strcmp_l1("partition-type:metadata", cmd)) { |
| strncat(response, "ext4", chars_left); |
| } else if (!strncmp("partition-type", cmd, strlen("partition-type"))) { |
| strncat(response, "raw", chars_left); |
| } else if (!strcmp_l1("erase-block-size", cmd) || |
| !strcmp_l1("logical-block-size", cmd)) { |
| strncat(response, "2000", chars_left); |
| } else if (!strcmp_l1("secure", cmd)) { |
| if (check_lock()) { |
| strncat(response, "yes", chars_left); |
| } else { |
| strncat(response, "no", chars_left); |
| } |
| } else if (!strcmp_l1("unlocked", cmd)) { |
| if (check_lock()) { |
| strncat(response, "no", chars_left); |
| } else { |
| strncat(response, "yes", chars_left); |
| } |
| } else if (!strcmp_l1("slot-successful", cmd)) { |
| strsep(&cmd, ":"); |
| FB_DBG("cmd is %s\n", cmd); |
| |
| AbrSlotInfo *slot_info = get_slot_info(cmd); |
| if (slot_info == NULL) { |
| fastboot_fail("Invalid slot suffix"); |
| } else { |
| strncat(response, |
| slot_info->is_marked_successful ? "yes" : "no", |
| chars_left); |
| } |
| } else if (!strcmp_l1("slot-unbootable", cmd)) { |
| strsep(&cmd, ":"); |
| FB_DBG("cmd is %s\n", cmd); |
| |
| AbrSlotInfo *slot_info = get_slot_info(cmd); |
| if (slot_info == NULL) { |
| fastboot_fail("Invalid slot suffix"); |
| } else { |
| strncat(response, slot_info->is_bootable ? "no" : "yes", |
| chars_left); |
| } |
| } else if (!strcmp_l1("slot-retry-count", cmd)) { |
| strsep(&cmd, ":"); |
| FB_DBG("cmd is %s\n", cmd); |
| |
| AbrSlotInfo *slot_info = get_slot_info(cmd); |
| if (slot_info == NULL) { |
| fastboot_fail("Invalid slot suffix"); |
| } else { |
| char buf[4]; |
| sprintf(buf, "%d", slot_info->num_tries_remaining); |
| strncat(response, buf, chars_left); |
| } |
| } else if (!strcmp_l1("vx-locked", cmd)) { |
| // VIM3 is dev only. We don't consider any lock/unlock feature for now. |
| strncat(response, "yes", chars_left); |
| } else if (!strcmp_l1("bootloader-variant", cmd)) { |
| strncat(response, "dev", chars_left); |
| } else if (!strcmp_l1("vx-unlockable", cmd)) { |
| strncat(response, "no", chars_left); |
| } else { |
| error("unknown variable: %s\n", cmd); |
| strcpy(response, "FAILVariable not implemented"); |
| } |
| |
| fastboot_tx_write_str(response); |
| } |
| |
| static unsigned int rx_bytes_expected(void) |
| { |
| int rx_remain = download_size - download_bytes; |
| if (rx_remain < 0) |
| return 0; |
| if (rx_remain > EP_BUFFER_SIZE) |
| return EP_BUFFER_SIZE; |
| return rx_remain; |
| } |
| |
| #define BYTES_PER_DOT 0x20000 |
| static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req) |
| { |
| char response[RESPONSE_LEN]; |
| unsigned int transfer_size = download_size - download_bytes; |
| const unsigned char *buffer = req->buf; |
| unsigned int buffer_size = req->actual; |
| unsigned int pre_dot_num, now_dot_num; |
| |
| if (req->status != 0) { |
| printf("Bad status: %d\n", req->status); |
| return; |
| } |
| |
| if (buffer_size < transfer_size) |
| transfer_size = buffer_size; |
| |
| memcpy((void *)CONFIG_USB_FASTBOOT_BUF_ADDR + download_bytes, |
| buffer, transfer_size); |
| |
| pre_dot_num = download_bytes / BYTES_PER_DOT; |
| download_bytes += transfer_size; |
| now_dot_num = download_bytes / BYTES_PER_DOT; |
| |
| if (pre_dot_num != now_dot_num) { |
| putc('.'); |
| if (!(now_dot_num % 74)) |
| putc('\n'); |
| } |
| |
| /* Check if transfer is done */ |
| if (download_bytes >= download_size) { |
| /* |
| * Reset global transfer variable, keep download_bytes because |
| * it will be used in the next possible flashing command |
| */ |
| download_size = 0; |
| req->complete = rx_handler_command; |
| req->length = EP_BUFFER_SIZE; |
| |
| sprintf(response, "OKAY"); |
| fastboot_tx_write_str(response); |
| |
| printf("\ndownloading of %u bytes finished\n", download_bytes); |
| } else { |
| req->length = rx_bytes_expected(); |
| if (req->length < ep->maxpacket) |
| req->length = ep->maxpacket; |
| } |
| |
| req->actual = 0; |
| usb_ep_queue(ep, req, 0); |
| } |
| |
| static void cb_download(struct usb_ep *ep, struct usb_request *req) |
| { |
| char *cmd = req->buf; |
| char response[RESPONSE_LEN]; |
| |
| printf("cmd cb_download is %s\n", cmd); |
| |
| strsep(&cmd, ":"); |
| download_size = simple_strtoul(cmd, NULL, 16); |
| download_bytes = 0; |
| |
| printf("Starting download of %u bytes\n", download_size); |
| |
| if (0 == download_size) { |
| sprintf(response, "FAILdata invalid size"); |
| } else if (download_size > ddr_size_usable(CONFIG_USB_FASTBOOT_BUF_ADDR)) { |
| download_size = 0; |
| sprintf(response, "FAILdata too large"); |
| } else { |
| sprintf(response, "DATA%08x", download_size); |
| req->complete = rx_handler_dl_image; |
| req->length = rx_bytes_expected(); |
| if (req->length < ep->maxpacket) |
| req->length = ep->maxpacket; |
| } |
| fastboot_tx_write_str(response); |
| } |
| |
| typedef struct andr_img_hdr boot_img_hdr; |
| |
| static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| zircon_ram_boot(); |
| |
| /* This only happens if image is somehow faulty so we start over */ |
| printf("Failed to boot RAM image; rebooting\n"); |
| do_reset(NULL, 0, 0, NULL); |
| } |
| |
| static void cb_boot(struct usb_ep *ep, struct usb_request *req) |
| { |
| if (zircon_ram_load((const void *)CONFIG_USB_FASTBOOT_BUF_ADDR, |
| download_bytes) != 0) { |
| fastboot_tx_write_str("FAILFailed to verify boot image"); |
| return; |
| } |
| |
| fastboot_func->in_req->complete = do_bootm_on_complete; |
| fastboot_tx_write_str("OKAY"); |
| } |
| |
| static void do_exit_on_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| puts("Booting kernel..\n"); |
| run_command("run storeboot", 0); |
| |
| /* This only happens if image is somehow faulty so we start over */ |
| do_reset(NULL, 0, 0, NULL); |
| } |
| |
| |
| static void cb_continue(struct usb_ep *ep, struct usb_request *req) |
| { |
| fastboot_func->in_req->complete = do_exit_on_complete; |
| fastboot_tx_write_str("OKAY"); |
| } |
| |
| static void cb_flashing(struct usb_ep *ep, struct usb_request *req) |
| { |
| char *cmd; |
| char* response = response_str; |
| char* lock_s; |
| LockData_t* info; |
| size_t chars_left; |
| char lock_d[LOCK_DATA_SIZE]; |
| |
| lock_s = getenv("lock"); |
| if (!lock_s) { |
| printf("lock state is NULL \n"); |
| strcpy(lock_d, "10000000"); |
| lock_s = "10000000"; |
| setenv("lock", "10000000"); |
| run_command("defenv_reserv; saveenv;", 0); |
| } else { |
| printf("lock state: %s\n", lock_s); |
| if (strlen(lock_s) > 15) |
| strncpy(lock_d, lock_s, 15); |
| else |
| strncpy(lock_d, lock_s, strlen(lock_s)); |
| } |
| |
| info = malloc(sizeof(struct LockData)); |
| if (!info) { |
| error("malloc error\n"); |
| fastboot_tx_write_str("FAILmalloc error"); |
| return; |
| } |
| memset(info,0,LOCK_DATA_SIZE); |
| info->version_major = (int)(lock_d[0] - '0'); |
| info->version_minor = (int)(lock_d[1] - '0'); |
| info->lock_state = (int)(lock_d[4] - '0'); |
| info->lock_critical_state = (int)(lock_d[5] - '0'); |
| info->lock_bootloader = (int)(lock_d[6] - '0'); |
| dump_lock_info(info); |
| |
| strcpy(response, "OKAY"); |
| chars_left = sizeof(response_str) - strlen(response) - 1; |
| cmd = req->buf; |
| strsep(&cmd, " "); |
| printf("cb_flashing: %s\n", cmd); |
| if (!cmd) { |
| error("missing variable\n"); |
| fastboot_tx_write_str("FAILmissing var"); |
| free(info); |
| return; |
| } |
| |
| if (!strcmp_l1("unlock_critical", cmd)) { |
| info->lock_critical_state = 0; |
| } else if (!strcmp_l1("lock_critical", cmd)) { |
| info->lock_critical_state = 1; |
| } else if (!strcmp_l1("get_unlock_ability", cmd)) { |
| char str_num[8]; |
| sprintf(str_num, "%d", info->lock_state); |
| strncat(response, str_num, chars_left); |
| } else if (!strcmp_l1("get_unlock_bootloader_nonce", cmd)) { |
| char str_num[8]; |
| sprintf(str_num, "%d", info->lock_critical_state); |
| strncat(response, str_num, chars_left); |
| } else if (!strcmp_l1("unlock_bootloader", cmd)) { |
| strncat(response, "please run flashing unlock & flashing unlock_critical before write", chars_left); |
| } else if (!strcmp_l1("lock_bootloader", cmd)) { |
| info->lock_bootloader = 1; |
| } else if (!strcmp_l1("unlock", cmd)) { |
| if (info->lock_state == 1 ) { |
| char *avb_s; |
| avb_s = getenv("avb2"); |
| if (avb_s == NULL) { |
| run_command("get_avb_mode;", 0); |
| avb_s = getenv("avb2"); |
| } |
| printf("avb2: %s\n", avb_s); |
| if (strcmp(avb_s, "1") == 0) { |
| #ifdef CONFIG_AML_ANTIROLLBACK |
| if (avb_unlock()) { |
| printf("unlocking device. Erasing userdata partition!\n"); |
| run_command("store erase partition data", 0); |
| } else { |
| printf("unlock failed!\n"); |
| } |
| #else |
| printf("unlocking device. Erasing userdata partition!\n"); |
| run_command("store erase partition data", 0); |
| #endif |
| } |
| } |
| info->lock_state = 0; |
| } else if (!strcmp_l1("lock", cmd)) { |
| if (info->lock_state == 0 ) { |
| char *avb_s; |
| avb_s = getenv("avb2"); |
| if (avb_s == NULL) { |
| run_command("get_avb_mode;", 0); |
| avb_s = getenv("avb2"); |
| } |
| printf("avb2: %s\n", avb_s); |
| if (strcmp(avb_s, "1") == 0) { |
| #ifdef CONFIG_AML_ANTIROLLBACK |
| if (avb_lock()) { |
| printf("lock failed!\n"); |
| } else { |
| printf("locking device. Erasing userdata partition!\n"); |
| run_command("store erase partition data", 0); |
| } |
| #else |
| printf("locking device. Erasing userdata partition!\n"); |
| run_command("store erase partition data", 0); |
| #endif |
| } |
| } |
| info->lock_state = 1; |
| } else { |
| error("unknown variable: %s\n", cmd); |
| strcpy(response, "FAILVariable not implemented"); |
| } |
| |
| dump_lock_info(info); |
| sprintf(lock_d, "%d%d00%d%d%d0", info->version_major, info->version_minor, info->lock_state, info->lock_critical_state, info->lock_bootloader); |
| FB_DBG("lock_d state: %s\n", lock_d); |
| setenv("lock", lock_d); |
| run_command("defenv_reserv; saveenv;", 0); |
| FB_DBG("response: %s\n", response); |
| free(info); |
| fastboot_tx_write_str(response); |
| } |
| |
| #ifdef CONFIG_FASTBOOT_FLASH |
| static void cb_flash(struct usb_ep *ep, struct usb_request *req) |
| { |
| char *cmd = req->buf; |
| char* response = response_str; |
| |
| printf("cmd cb_flash is %s\n", cmd); |
| const char *part = parse_fb_cmd_partition(cmd); |
| if (!part) { |
| return; |
| } |
| |
| if (check_lock() && (get_fastboot_lock_access(part) & WRITE) == 0) { |
| error("Cannot flash %s while locked\n", part); |
| fastboot_tx_write_str("FAILlocked partition"); |
| return; |
| } |
| |
| #ifdef CONFIG_BOOTLOADER_CONTROL_BLOCK |
| if (dynamic_partition) { |
| if (is_partition_logical(part) == 0) { |
| error("%s is logic partition, can not write here.......\n", |
| part); |
| fastboot_tx_write_str("FAILlogic partition"); |
| return; |
| } |
| } |
| #endif |
| |
| //strcpy(response, "FAILno flash device defined"); |
| if (is_mainstorage_emmc()) { |
| #ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV |
| fb_mmc_flash_write(part, (void *)CONFIG_USB_FASTBOOT_BUF_ADDR, |
| download_bytes); |
| #endif |
| } else if (is_mainstorage_nand()) { |
| #ifdef CONFIG_FASTBOOT_FLASH_NAND_DEV |
| fb_nand_flash_write(part, (void *)CONFIG_USB_FASTBOOT_BUF_ADDR, |
| download_bytes); |
| #else |
| fastboot_fail("not support nftl\n"); |
| #endif |
| } else { |
| printf("error: no valid fastboot device\n"); |
| fastboot_fail("no vaild device\n"); |
| } |
| fastboot_tx_write_str(response); |
| } |
| #endif |
| |
| static void cb_set_active(struct usb_ep *ep, struct usb_request *req) |
| { |
| char *cmd = req->buf; |
| int ret = 0; |
| |
| printf("cmd cb_set_active is %s\n", cmd); |
| strsep(&cmd, ":"); |
| if (!cmd) { |
| error("missing slot name\n"); |
| fastboot_tx_write_str("FAILmissing slot name"); |
| return; |
| } |
| |
| AbrOps ops = GetAbrOpsFromZirconBootOps(&zb_ops); |
| AbrSlotIndex slot; |
| if (strcmp(cmd, "a") == 0) { |
| slot = kAbrSlotIndexA; |
| } else if (strcmp(cmd, "b") == 0) { |
| slot = kAbrSlotIndexB; |
| } else { |
| printf("Cannot set slot %s active.\n", cmd); |
| fastboot_tx_write_str("FAILunsupported slot"); |
| return; |
| } |
| |
| AbrResult abr_res = AbrMarkSlotActive(&ops, slot); |
| printf("abr_res = %d\n", ret); |
| if (abr_res == kAbrResultOk) |
| fastboot_tx_write_str("OKAY"); |
| else |
| fastboot_tx_write_str("FAILset slot error"); |
| } |
| |
| static void cb_flashall(struct usb_ep *ep, struct usb_request *req) |
| { |
| char* response = response_str; |
| char *cmd = req->buf; |
| |
| printf("cmd cb_flashall is %s\n", cmd); |
| |
| if (check_lock()) { |
| error("device is locked, can not run this cmd.Please flashing unlock & flashing unlock_critical\n"); |
| fastboot_tx_write_str("FAILlocked device"); |
| return; |
| } |
| |
| //strcpy(response, "FAILno flash device defined"); |
| if (is_mainstorage_emmc()) { |
| #ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV |
| fb_mmc_flash_write(cmd, (void *)CONFIG_USB_FASTBOOT_BUF_ADDR, |
| download_bytes); |
| #endif |
| } else if (is_mainstorage_nand()) { |
| #ifdef CONFIG_FASTBOOT_FLASH_NAND_DEV |
| fb_nand_flash_write(cmd, (void *)CONFIG_USB_FASTBOOT_BUF_ADDR, |
| download_bytes); |
| #else |
| fastboot_fail("not support nftl\n"); |
| #endif |
| } else { |
| printf("error: no valid fastboot device\n"); |
| fastboot_fail("no vaild device\n"); |
| } |
| fastboot_tx_write_str(response); |
| } |
| |
| static void cb_erase(struct usb_ep *ep, struct usb_request *req) |
| { |
| char* response = response_str; |
| char *cmd = req->buf; |
| |
| printf("cmd cb_erase is %s\n", cmd); |
| const char *part = parse_fb_cmd_partition(cmd); |
| if (!part) { |
| return; |
| } |
| |
| if (check_lock() && (get_fastboot_lock_access(part) & ERASE) == 0) { |
| error("Cannot erase %s while locked\n", part); |
| fastboot_tx_write_str("FAILlocked partition"); |
| return; |
| } |
| |
| //strcpy(response, "FAILno erase device defined"); |
| if (is_mainstorage_emmc()) { |
| #ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV |
| fb_mmc_erase_write(part, (void *)CONFIG_USB_FASTBOOT_BUF_ADDR); |
| #endif |
| } else if (is_mainstorage_nand()) { |
| #ifdef CONFIG_FASTBOOT_FLASH_NAND_DEV |
| fb_nand_erase(part, (void *)CONFIG_USB_FASTBOOT_BUF_ADDR); |
| #else |
| fastboot_fail("not support nftl\n"); |
| #endif |
| } else { |
| printf("error: no valid fastboot device\n"); |
| fastboot_fail("no vaild device\n"); |
| } |
| fastboot_tx_write_str(response); |
| } |
| |
| static void cb_devices(struct usb_ep *ep, struct usb_request *req) |
| { |
| char response[RESPONSE_LEN]; |
| char *cmd = req->buf; |
| |
| printf("cmd is %s\n", cmd); |
| |
| strcpy(response, "AMLOGIC"); |
| |
| fastboot_tx_write_str(response); |
| } |
| |
| static void cb_oem_cmd(struct usb_ep *ep, struct usb_request *req) |
| { |
| char response[RESPONSE_LEN/2 + 1]; |
| char* cmd = req->buf; |
| printf("oem cmd[%s]\n", cmd); |
| |
| memcpy(response, cmd, strnlen(cmd, RESPONSE_LEN/2)+1);//+1 to terminate str |
| cmd = response; |
| strsep(&cmd, " "); |
| FB_MSG("To run cmd[%s]\n", cmd); |
| run_command(cmd, 0); |
| |
| fastboot_okay(response); |
| fastboot_tx_write_str(response_str); |
| return ; |
| } |
| |
| static void cb_staged_bootloader_file(struct usb_ep *ep, |
| struct usb_request *req) |
| { |
| char *name = req->buf; |
| |
| // skip past "oem add-staged-bootloader-file" |
| if (!(strsep(&name, " ") && strsep(&name, " ") && name)) { |
| fastboot_fail("No file name given"); |
| fastboot_tx_write_str(response_str); |
| return; |
| } |
| |
| if (download_bytes == 0) { |
| fastboot_fail("Nothing staged"); |
| fastboot_tx_write_str(response_str); |
| return; |
| } |
| |
| if (AddBootloaderFiles(name, (const void *)CONFIG_USB_FASTBOOT_BUF_ADDR, |
| download_bytes) != ZBI_RESULT_OK) { |
| fastboot_fail("Failed to add ZBI file item"); |
| fastboot_tx_write_str(response_str); |
| return; |
| } |
| |
| fastboot_okay(""); |
| fastboot_tx_write_str(response_str); |
| } |
| |
| static void cb_run_staged_efi(struct usb_ep *ep, struct usb_request *req) |
| { |
| // TODO(313510811): Figure out security verification for the binary, i.e. |
| // using EFI secure boot. |
| if (efi_check_pe((void *)CONFIG_USB_FASTBOOT_BUF_ADDR, download_bytes, |
| NULL) != EFI_SUCCESS) { |
| fastboot_tx_write_str("FAILNo valid EFI image staged"); |
| return; |
| } |
| |
| char cmd[128]; |
| snprintf(cmd, sizeof(cmd), "bootefi 0x%x:0x%x ${dtb_mem_addr}", |
| CONFIG_USB_FASTBOOT_BUF_ADDR, download_bytes); |
| if (run_command(cmd, 0)) { |
| fastboot_tx_write_str("FAILFailed to run EFI binary"); |
| } else { |
| fastboot_tx_write_str("OKAY"); |
| } |
| } |
| |
| struct cmd_dispatch_info { |
| char *cmd; |
| void (*cb)(struct usb_ep *ep, struct usb_request *req); |
| }; |
| |
| static const struct cmd_dispatch_info cmd_dispatch_info[] = { |
| { |
| // Due to command prefix matching, this catches all the |
| // reboot* commands. |
| .cmd = "reboot", |
| .cb = cb_reboot, |
| }, |
| { |
| .cmd = "getvar:", |
| .cb = cb_getvar, |
| }, |
| { |
| .cmd = "download:", |
| .cb = cb_download, |
| }, |
| { |
| .cmd = "boot", |
| .cb = cb_boot, |
| }, |
| { |
| .cmd = "continue", |
| .cb = cb_continue, |
| }, |
| { |
| .cmd = "flashing", |
| .cb = cb_flashing, |
| }, |
| #ifdef CONFIG_FASTBOOT_FLASH |
| { |
| .cmd = "flash", |
| .cb = cb_flash, |
| }, |
| #endif |
| { |
| .cmd = "update", |
| .cb = cb_download, |
| }, |
| { |
| .cmd = "flashall", |
| .cb = cb_flashall, |
| }, |
| { |
| .cmd = "erase", |
| .cb = cb_erase, |
| }, |
| { |
| .cmd = "devices", |
| .cb = cb_devices, |
| }, |
| { |
| .cmd = "set_active", |
| .cb = cb_set_active, |
| }, |
| { |
| .cmd = "oem add-staged-bootloader-file", |
| .cb = cb_staged_bootloader_file, |
| }, |
| { |
| .cmd = "oem run-staged-efi", |
| .cb = cb_run_staged_efi, |
| }, |
| { |
| .cmd = "oem", |
| .cb = cb_oem_cmd, |
| } |
| }; |
| |
| //cb for out_req->complete |
| static void rx_handler_command(struct usb_ep *ep, struct usb_request *req) |
| { |
| char *cmdbuf = req->buf; |
| void (*func_cb)(struct usb_ep *ep, struct usb_request *req) = NULL; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(cmd_dispatch_info); i++) { |
| if (!strcmp_l1(cmd_dispatch_info[i].cmd, cmdbuf)) { |
| func_cb = cmd_dispatch_info[i].cb; |
| break; |
| } |
| } |
| |
| if (!func_cb) { |
| error("unknown command: %s\n", cmdbuf); |
| fastboot_tx_write_str("FAILunknown command"); |
| } else { |
| if (req->actual < req->length) { |
| u8 *buf = (u8 *)req->buf; |
| buf[req->actual] = 0; |
| func_cb(ep, req); |
| } else { |
| error("buffer overflow\n"); |
| fastboot_tx_write_str("FAILbuffer overflow"); |
| } |
| } |
| |
| if (req->status == 0 && !fastboot_is_busy()) { |
| *cmdbuf = '\0'; |
| req->actual = 0; |
| usb_ep_queue(ep, req, 0); |
| } |
| } |