arch/powerpc/cpu/ppc4xx/tlb.c - u-boot - Git at Google

 /*
  * (C) Copyright 2007
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>

 #if defined(CONFIG_440)

 #include <asm/ppc440.h>
 #include <asm/cache.h>
 #include <asm/io.h>
 #include <asm/mmu.h>

 typedef struct region {
 	u64 base;
 	u32 size;
 	u32 tlb_word2_i_value;
 } region_t;

 void remove_tlb(u32 vaddr, u32 size)
 {
 	int i;
 	u32 tlb_word0_value;
 	u32 tlb_vaddr;
 	u32 tlb_size = 0;

 	for (i=0; i<PPC4XX_TLB_SIZE; i++) {
 		tlb_word0_value = mftlb1(i);
 		tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
 		if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
 		    (tlb_vaddr >= vaddr)) {
 			/*
 			 * TLB is enabled and start address is lower or equal
 			 * than the area we are looking for. Now we only have
 			 * to check the size/end address for a match.
 			 */
 			switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
 			case TLB_WORD0_SIZE_1KB:
 				tlb_size = 1 << 10;
 				break;
 			case TLB_WORD0_SIZE_4KB:
 				tlb_size = 4 << 10;
 				break;
 			case TLB_WORD0_SIZE_16KB:
 				tlb_size = 16 << 10;
 				break;
 			case TLB_WORD0_SIZE_64KB:
 				tlb_size = 64 << 10;
 				break;
 			case TLB_WORD0_SIZE_256KB:
 				tlb_size = 256 << 10;
 				break;
 			case TLB_WORD0_SIZE_1MB:
 				tlb_size = 1 << 20;
 				break;
 			case TLB_WORD0_SIZE_16MB:
 				tlb_size = 16 << 20;
 				break;
 			case TLB_WORD0_SIZE_256MB:
 				tlb_size = 256 << 20;
 				break;
 			}

 			/*
 			 * Now check the end-address if it's in the range
 			 */
 			if ((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1))
 				/*
 				 * Found a TLB in the range.
 				 * Disable it by writing 0 to tlb0 word.
 				 */
 				mttlb1(i, 0);
 		}
 	}

 	/* Execute an ISYNC instruction so that the new TLB entry takes effect */
 	asm("isync");
 }

 /*
  * Change the I attribute (cache inhibited) of a TLB or multiple TLB's.
  * This function is used to either turn cache on or off in a specific
  * memory area.
  */
 void change_tlb(u32 vaddr, u32 size, u32 tlb_word2_i_value)
 {
 	int i;
 	u32 tlb_word0_value;
 	u32 tlb_word2_value;
 	u32 tlb_vaddr;
 	u32 tlb_size = 0;

 	for (i=0; i<PPC4XX_TLB_SIZE; i++) {
 		tlb_word0_value = mftlb1(i);
 		tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
 		if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
 		    (tlb_vaddr >= vaddr)) {
 			/*
 			 * TLB is enabled and start address is lower or equal
 			 * than the area we are looking for. Now we only have
 			 * to check the size/end address for a match.
 			 */
 			switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
 			case TLB_WORD0_SIZE_1KB:
 				tlb_size = 1 << 10;
 				break;
 			case TLB_WORD0_SIZE_4KB:
 				tlb_size = 4 << 10;
 				break;
 			case TLB_WORD0_SIZE_16KB:
 				tlb_size = 16 << 10;
 				break;
 			case TLB_WORD0_SIZE_64KB:
 				tlb_size = 64 << 10;
 				break;
 			case TLB_WORD0_SIZE_256KB:
 				tlb_size = 256 << 10;
 				break;
 			case TLB_WORD0_SIZE_1MB:
 				tlb_size = 1 << 20;
 				break;
 			case TLB_WORD0_SIZE_16MB:
 				tlb_size = 16 << 20;
 				break;
 			case TLB_WORD0_SIZE_256MB:
 				tlb_size = 256 << 20;
 				break;
 			}

 			/*
 			 * Now check the end-address if it's in the range
 			 */
 			if (((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1)) ||
 			    ((tlb_vaddr < (vaddr + size - 1)) &&
 			     ((tlb_vaddr + tlb_size - 1) > (vaddr + size - 1)))) {
 				/*
 				 * Found a TLB in the range.
 				 * Change cache attribute in tlb2 word.
 				 */
 				tlb_word2_value =
 					TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
 					TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
 					TLB_WORD2_W_DISABLE | tlb_word2_i_value |
 					TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
 					TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
 					TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
 					TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
 					TLB_WORD2_SR_ENABLE;

 				/*
 				 * Now either flush or invalidate the dcache
 				 */
 				if (tlb_word2_i_value)
 					flush_dcache();
 				else
 					invalidate_dcache();

 				mttlb3(i, tlb_word2_value);
 				asm("iccci 0,0");
 			}
 		}
 	}

 	/* Execute an ISYNC instruction so that the new TLB entry takes effect */
 	asm("isync");
 }

 static int add_tlb_entry(u64 phys_addr,
 			 u32 virt_addr,
 			 u32 tlb_word0_size_value,
 			 u32 tlb_word2_i_value)
 {
 	int i;
 	unsigned long tlb_word0_value;
 	unsigned long tlb_word1_value;
 	unsigned long tlb_word2_value;

 	/* First, find the index of a TLB entry not being used */
 	for (i=0; i<PPC4XX_TLB_SIZE; i++) {
 		tlb_word0_value = mftlb1(i);
 		if ((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_DISABLE)
 			break;
 	}
 	if (i >= PPC4XX_TLB_SIZE)
 		return -1;

 	/* Second, create the TLB entry */
 	tlb_word0_value = TLB_WORD0_EPN_ENCODE(virt_addr) | TLB_WORD0_V_ENABLE |
 		TLB_WORD0_TS_0 | tlb_word0_size_value;
 	tlb_word1_value = TLB_WORD1_RPN_ENCODE((u32)phys_addr) |
 		TLB_WORD1_ERPN_ENCODE(phys_addr >> 32);
 	tlb_word2_value = TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
 		TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
 		TLB_WORD2_W_DISABLE | tlb_word2_i_value |
 		TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
 		TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
 		TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
 		TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
 		TLB_WORD2_SR_ENABLE;

 	/* Wait for all memory accesses to complete */
 	sync();

 	/* Third, add the TLB entries */
 	mttlb1(i, tlb_word0_value);
 	mttlb2(i, tlb_word1_value);
 	mttlb3(i, tlb_word2_value);

 	/* Execute an ISYNC instruction so that the new TLB entry takes effect */
 	asm("isync");

 	return 0;
 }

 static void program_tlb_addr(u64 phys_addr,
 			     u32 virt_addr,
 			     u32 mem_size,
 			     u32 tlb_word2_i_value)
 {
 	int rc;
 	int tlb_i;

 	tlb_i = tlb_word2_i_value;
 	while (mem_size != 0) {
 		rc = 0;
 		/* Add the TLB entries in to map the region. */
 		if (((phys_addr & TLB_256MB_ALIGN_MASK) == phys_addr) &&
 		    (mem_size >= TLB_256MB_SIZE)) {
 			/* Add a 256MB TLB entry */
 			if ((rc = add_tlb_entry(phys_addr, virt_addr,
 						TLB_WORD0_SIZE_256MB, tlb_i)) == 0) {
 				mem_size -= TLB_256MB_SIZE;
 				phys_addr += TLB_256MB_SIZE;
 				virt_addr += TLB_256MB_SIZE;
 			}
 		} else if (((phys_addr & TLB_16MB_ALIGN_MASK) == phys_addr) &&
 			   (mem_size >= TLB_16MB_SIZE)) {
 			/* Add a 16MB TLB entry */
 			if ((rc = add_tlb_entry(phys_addr, virt_addr,
 						TLB_WORD0_SIZE_16MB, tlb_i)) == 0) {
 				mem_size -= TLB_16MB_SIZE;
 				phys_addr += TLB_16MB_SIZE;
 				virt_addr += TLB_16MB_SIZE;
 			}
 		} else if (((phys_addr & TLB_1MB_ALIGN_MASK) == phys_addr) &&
 			   (mem_size >= TLB_1MB_SIZE)) {
 			/* Add a 1MB TLB entry */
 			if ((rc = add_tlb_entry(phys_addr, virt_addr,
 						TLB_WORD0_SIZE_1MB, tlb_i)) == 0) {
 				mem_size -= TLB_1MB_SIZE;
 				phys_addr += TLB_1MB_SIZE;
 				virt_addr += TLB_1MB_SIZE;
 			}
 		} else if (((phys_addr & TLB_256KB_ALIGN_MASK) == phys_addr) &&
 			   (mem_size >= TLB_256KB_SIZE)) {
 			/* Add a 256KB TLB entry */
 			if ((rc = add_tlb_entry(phys_addr, virt_addr,
 						TLB_WORD0_SIZE_256KB, tlb_i)) == 0) {
 				mem_size -= TLB_256KB_SIZE;
 				phys_addr += TLB_256KB_SIZE;
 				virt_addr += TLB_256KB_SIZE;
 			}
 		} else if (((phys_addr & TLB_64KB_ALIGN_MASK) == phys_addr) &&
 			   (mem_size >= TLB_64KB_SIZE)) {
 			/* Add a 64KB TLB entry */
 			if ((rc = add_tlb_entry(phys_addr, virt_addr,
 						TLB_WORD0_SIZE_64KB, tlb_i)) == 0) {
 				mem_size -= TLB_64KB_SIZE;
 				phys_addr += TLB_64KB_SIZE;
 				virt_addr += TLB_64KB_SIZE;
 			}
 		} else if (((phys_addr & TLB_16KB_ALIGN_MASK) == phys_addr) &&
 			   (mem_size >= TLB_16KB_SIZE)) {
 			/* Add a 16KB TLB entry */
 			if ((rc = add_tlb_entry(phys_addr, virt_addr,
 						TLB_WORD0_SIZE_16KB, tlb_i)) == 0) {
 				mem_size -= TLB_16KB_SIZE;
 				phys_addr += TLB_16KB_SIZE;
 				virt_addr += TLB_16KB_SIZE;
 			}
 		} else if (((phys_addr & TLB_4KB_ALIGN_MASK) == phys_addr) &&
 			   (mem_size >= TLB_4KB_SIZE)) {
 			/* Add a 4KB TLB entry */
 			if ((rc = add_tlb_entry(phys_addr, virt_addr,
 						TLB_WORD0_SIZE_4KB, tlb_i)) == 0) {
 				mem_size -= TLB_4KB_SIZE;
 				phys_addr += TLB_4KB_SIZE;
 				virt_addr += TLB_4KB_SIZE;
 			}
 		} else if (((phys_addr & TLB_1KB_ALIGN_MASK) == phys_addr) &&
 			   (mem_size >= TLB_1KB_SIZE)) {
 			/* Add a 1KB TLB entry */
 			if ((rc = add_tlb_entry(phys_addr, virt_addr,
 						TLB_WORD0_SIZE_1KB, tlb_i)) == 0) {
 				mem_size -= TLB_1KB_SIZE;
 				phys_addr += TLB_1KB_SIZE;
 				virt_addr += TLB_1KB_SIZE;
 			}
 		} else {
 			printf("ERROR: no TLB size exists for the base address 0x%llx.\n",
 				phys_addr);
 		}

 		if (rc != 0)
 			printf("ERROR: no TLB entries available for the base addr 0x%llx.\n",
 				phys_addr);
 	}

 	return;
 }

 /*
  * Program one (or multiple) TLB entries for one memory region
  *
  * Common usage for boards with SDRAM DIMM modules to dynamically
  * configure the TLB's for the SDRAM
  */
 void program_tlb(u64 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value)
 {
 	region_t region_array;

 	region_array.base = phys_addr;
 	region_array.size = size;
 	region_array.tlb_word2_i_value = tlb_word2_i_value;	/* en-/disable cache */

 	/* Call the routine to add in the tlb entries for the memory regions */
 	program_tlb_addr(region_array.base, virt_addr, region_array.size,
 			 region_array.tlb_word2_i_value);

 	return;
 }

 #endif /* CONFIG_440 */
	/*
	* (C) Copyright 2007
	* Stefan Roese, DENX Software Engineering, sr@denx.de.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>

	#if defined(CONFIG_440)

	#include <asm/ppc440.h>
	#include <asm/cache.h>
	#include <asm/io.h>
	#include <asm/mmu.h>

	typedef struct region {
	u64 base;
	u32 size;
	u32 tlb_word2_i_value;
	} region_t;

	void remove_tlb(u32 vaddr, u32 size)
	{
	int i;
	u32 tlb_word0_value;
	u32 tlb_vaddr;
	u32 tlb_size = 0;

	for (i=0; i<PPC4XX_TLB_SIZE; i++) {
	tlb_word0_value = mftlb1(i);
	tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
	if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
	(tlb_vaddr >= vaddr)) {
	/*
	* TLB is enabled and start address is lower or equal
	* than the area we are looking for. Now we only have
	* to check the size/end address for a match.
	*/
	switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
	case TLB_WORD0_SIZE_1KB:
	tlb_size = 1 << 10;
	break;
	case TLB_WORD0_SIZE_4KB:
	tlb_size = 4 << 10;
	break;
	case TLB_WORD0_SIZE_16KB:
	tlb_size = 16 << 10;
	break;
	case TLB_WORD0_SIZE_64KB:
	tlb_size = 64 << 10;
	break;
	case TLB_WORD0_SIZE_256KB:
	tlb_size = 256 << 10;
	break;
	case TLB_WORD0_SIZE_1MB:
	tlb_size = 1 << 20;
	break;
	case TLB_WORD0_SIZE_16MB:
	tlb_size = 16 << 20;
	break;
	case TLB_WORD0_SIZE_256MB:
	tlb_size = 256 << 20;
	break;
	}

	/*
	* Now check the end-address if it's in the range
	*/
	if ((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1))
	/*
	* Found a TLB in the range.
	* Disable it by writing 0 to tlb0 word.
	*/
	mttlb1(i, 0);
	}
	}

	/* Execute an ISYNC instruction so that the new TLB entry takes effect */
	asm("isync");
	}

	/*
	* Change the I attribute (cache inhibited) of a TLB or multiple TLB's.
	* This function is used to either turn cache on or off in a specific
	* memory area.
	*/
	void change_tlb(u32 vaddr, u32 size, u32 tlb_word2_i_value)
	{
	int i;
	u32 tlb_word0_value;
	u32 tlb_word2_value;
	u32 tlb_vaddr;
	u32 tlb_size = 0;

	for (i=0; i<PPC4XX_TLB_SIZE; i++) {
	tlb_word0_value = mftlb1(i);
	tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
	if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
	(tlb_vaddr >= vaddr)) {
	/*
	* TLB is enabled and start address is lower or equal
	* than the area we are looking for. Now we only have
	* to check the size/end address for a match.
	*/
	switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
	case TLB_WORD0_SIZE_1KB:
	tlb_size = 1 << 10;
	break;
	case TLB_WORD0_SIZE_4KB:
	tlb_size = 4 << 10;
	break;
	case TLB_WORD0_SIZE_16KB:
	tlb_size = 16 << 10;
	break;
	case TLB_WORD0_SIZE_64KB:
	tlb_size = 64 << 10;
	break;
	case TLB_WORD0_SIZE_256KB:
	tlb_size = 256 << 10;
	break;
	case TLB_WORD0_SIZE_1MB:
	tlb_size = 1 << 20;
	break;
	case TLB_WORD0_SIZE_16MB:
	tlb_size = 16 << 20;
	break;
	case TLB_WORD0_SIZE_256MB:
	tlb_size = 256 << 20;
	break;
	}

	/*
	* Now check the end-address if it's in the range
	*/
	if (((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1)) \|\|
	((tlb_vaddr < (vaddr + size - 1)) &&
	((tlb_vaddr + tlb_size - 1) > (vaddr + size - 1)))) {
	/*
	* Found a TLB in the range.
	* Change cache attribute in tlb2 word.
	*/
	tlb_word2_value =
	TLB_WORD2_U0_DISABLE \| TLB_WORD2_U1_DISABLE \|
	TLB_WORD2_U2_DISABLE \| TLB_WORD2_U3_DISABLE \|
	TLB_WORD2_W_DISABLE \| tlb_word2_i_value \|
	TLB_WORD2_M_DISABLE \| TLB_WORD2_G_DISABLE \|
	TLB_WORD2_E_DISABLE \| TLB_WORD2_UX_ENABLE \|
	TLB_WORD2_UW_ENABLE \| TLB_WORD2_UR_ENABLE \|
	TLB_WORD2_SX_ENABLE \| TLB_WORD2_SW_ENABLE \|
	TLB_WORD2_SR_ENABLE;

	/*
	* Now either flush or invalidate the dcache
	*/
	if (tlb_word2_i_value)
	flush_dcache();
	else
	invalidate_dcache();

	mttlb3(i, tlb_word2_value);
	asm("iccci 0,0");
	}
	}
	}

	/* Execute an ISYNC instruction so that the new TLB entry takes effect */
	asm("isync");
	}

	static int add_tlb_entry(u64 phys_addr,
	u32 virt_addr,
	u32 tlb_word0_size_value,
	u32 tlb_word2_i_value)
	{
	int i;
	unsigned long tlb_word0_value;
	unsigned long tlb_word1_value;
	unsigned long tlb_word2_value;

	/* First, find the index of a TLB entry not being used */
	for (i=0; i<PPC4XX_TLB_SIZE; i++) {
	tlb_word0_value = mftlb1(i);
	if ((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_DISABLE)
	break;
	}
	if (i >= PPC4XX_TLB_SIZE)
	return -1;

	/* Second, create the TLB entry */
	tlb_word0_value = TLB_WORD0_EPN_ENCODE(virt_addr) \| TLB_WORD0_V_ENABLE \|
	TLB_WORD0_TS_0 \| tlb_word0_size_value;
	tlb_word1_value = TLB_WORD1_RPN_ENCODE((u32)phys_addr) \|
	TLB_WORD1_ERPN_ENCODE(phys_addr >> 32);
	tlb_word2_value = TLB_WORD2_U0_DISABLE \| TLB_WORD2_U1_DISABLE \|
	TLB_WORD2_U2_DISABLE \| TLB_WORD2_U3_DISABLE \|
	TLB_WORD2_W_DISABLE \| tlb_word2_i_value \|
	TLB_WORD2_M_DISABLE \| TLB_WORD2_G_DISABLE \|
	TLB_WORD2_E_DISABLE \| TLB_WORD2_UX_ENABLE \|
	TLB_WORD2_UW_ENABLE \| TLB_WORD2_UR_ENABLE \|
	TLB_WORD2_SX_ENABLE \| TLB_WORD2_SW_ENABLE \|
	TLB_WORD2_SR_ENABLE;

	/* Wait for all memory accesses to complete */
	sync();

	/* Third, add the TLB entries */
	mttlb1(i, tlb_word0_value);
	mttlb2(i, tlb_word1_value);
	mttlb3(i, tlb_word2_value);

	/* Execute an ISYNC instruction so that the new TLB entry takes effect */
	asm("isync");

	return 0;
	}

	static void program_tlb_addr(u64 phys_addr,
	u32 virt_addr,
	u32 mem_size,
	u32 tlb_word2_i_value)
	{
	int rc;
	int tlb_i;

	tlb_i = tlb_word2_i_value;
	while (mem_size != 0) {
	rc = 0;
	/* Add the TLB entries in to map the region. */
	if (((phys_addr & TLB_256MB_ALIGN_MASK) == phys_addr) &&
	(mem_size >= TLB_256MB_SIZE)) {
	/* Add a 256MB TLB entry */
	if ((rc = add_tlb_entry(phys_addr, virt_addr,
	TLB_WORD0_SIZE_256MB, tlb_i)) == 0) {
	mem_size -= TLB_256MB_SIZE;
	phys_addr += TLB_256MB_SIZE;
	virt_addr += TLB_256MB_SIZE;
	}
	} else if (((phys_addr & TLB_16MB_ALIGN_MASK) == phys_addr) &&
	(mem_size >= TLB_16MB_SIZE)) {
	/* Add a 16MB TLB entry */
	if ((rc = add_tlb_entry(phys_addr, virt_addr,
	TLB_WORD0_SIZE_16MB, tlb_i)) == 0) {
	mem_size -= TLB_16MB_SIZE;
	phys_addr += TLB_16MB_SIZE;
	virt_addr += TLB_16MB_SIZE;
	}
	} else if (((phys_addr & TLB_1MB_ALIGN_MASK) == phys_addr) &&
	(mem_size >= TLB_1MB_SIZE)) {
	/* Add a 1MB TLB entry */
	if ((rc = add_tlb_entry(phys_addr, virt_addr,
	TLB_WORD0_SIZE_1MB, tlb_i)) == 0) {
	mem_size -= TLB_1MB_SIZE;
	phys_addr += TLB_1MB_SIZE;
	virt_addr += TLB_1MB_SIZE;
	}
	} else if (((phys_addr & TLB_256KB_ALIGN_MASK) == phys_addr) &&
	(mem_size >= TLB_256KB_SIZE)) {
	/* Add a 256KB TLB entry */
	if ((rc = add_tlb_entry(phys_addr, virt_addr,
	TLB_WORD0_SIZE_256KB, tlb_i)) == 0) {
	mem_size -= TLB_256KB_SIZE;
	phys_addr += TLB_256KB_SIZE;
	virt_addr += TLB_256KB_SIZE;
	}
	} else if (((phys_addr & TLB_64KB_ALIGN_MASK) == phys_addr) &&
	(mem_size >= TLB_64KB_SIZE)) {
	/* Add a 64KB TLB entry */
	if ((rc = add_tlb_entry(phys_addr, virt_addr,
	TLB_WORD0_SIZE_64KB, tlb_i)) == 0) {
	mem_size -= TLB_64KB_SIZE;
	phys_addr += TLB_64KB_SIZE;
	virt_addr += TLB_64KB_SIZE;
	}
	} else if (((phys_addr & TLB_16KB_ALIGN_MASK) == phys_addr) &&
	(mem_size >= TLB_16KB_SIZE)) {
	/* Add a 16KB TLB entry */
	if ((rc = add_tlb_entry(phys_addr, virt_addr,
	TLB_WORD0_SIZE_16KB, tlb_i)) == 0) {
	mem_size -= TLB_16KB_SIZE;
	phys_addr += TLB_16KB_SIZE;
	virt_addr += TLB_16KB_SIZE;
	}
	} else if (((phys_addr & TLB_4KB_ALIGN_MASK) == phys_addr) &&
	(mem_size >= TLB_4KB_SIZE)) {
	/* Add a 4KB TLB entry */
	if ((rc = add_tlb_entry(phys_addr, virt_addr,
	TLB_WORD0_SIZE_4KB, tlb_i)) == 0) {
	mem_size -= TLB_4KB_SIZE;
	phys_addr += TLB_4KB_SIZE;
	virt_addr += TLB_4KB_SIZE;
	}
	} else if (((phys_addr & TLB_1KB_ALIGN_MASK) == phys_addr) &&
	(mem_size >= TLB_1KB_SIZE)) {
	/* Add a 1KB TLB entry */
	if ((rc = add_tlb_entry(phys_addr, virt_addr,
	TLB_WORD0_SIZE_1KB, tlb_i)) == 0) {
	mem_size -= TLB_1KB_SIZE;
	phys_addr += TLB_1KB_SIZE;
	virt_addr += TLB_1KB_SIZE;
	}
	} else {
	printf("ERROR: no TLB size exists for the base address 0x%llx.\n",
	phys_addr);
	}

	if (rc != 0)
	printf("ERROR: no TLB entries available for the base addr 0x%llx.\n",
	phys_addr);
	}

	return;
	}

	/*
	* Program one (or multiple) TLB entries for one memory region
	*
	* Common usage for boards with SDRAM DIMM modules to dynamically
	* configure the TLB's for the SDRAM
	*/
	void program_tlb(u64 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value)
	{
	region_t region_array;

	region_array.base = phys_addr;
	region_array.size = size;
	region_array.tlb_word2_i_value = tlb_word2_i_value; /* en-/disable cache */

	/* Call the routine to add in the tlb entries for the memory regions */
	program_tlb_addr(region_array.base, virt_addr, region_array.size,
	region_array.tlb_word2_i_value);

	return;
	}

	#endif /* CONFIG_440 */