arch/powerpc/include/asm/fsl_liodn.h - u-boot - Git at Google

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2009-2011 Freescale Semiconductor, Inc.
  */

 #ifndef _FSL_LIODN_H_
 #define _FSL_LIODN_H_

 #include <asm/types.h>
 #include <fsl_qbman.h>

 struct srio_liodn_id_table {
 	u32 id[2];
 	unsigned long reg_offset[2];
 	u8 num_ids;
 	u8 portid;
 };
 #define SET_SRIO_LIODN_1(port, idA) \
 	{ .id = { idA }, .num_ids = 1, .portid = port, \
 	  .reg_offset[0] = offsetof(ccsr_gur_t, rio##port##liodnr) \
 		+ CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \
 	}

 #define SET_SRIO_LIODN_2(port, idA, idB) \
 	{ .id = { idA, idB }, .num_ids = 2, .portid = port, \
 	  .reg_offset[0] = offsetof(ccsr_gur_t, rio##port##liodnr) \
 		+ CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \
 	  .reg_offset[1] = offsetof(ccsr_gur_t, rio##port##maintliodnr) \
 		+ CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \
 	}

 #define SET_SRIO_LIODN_BASE(port, id_a) \
 	{ .id = { id_a }, .num_ids = 1, .portid = port, \
 	  .reg_offset[0] = offsetof(struct ccsr_rio, liodn) \
 		+ (port - 1) * 0x200 \
 		+ CONFIG_SYS_FSL_SRIO_ADDR, \
 	}

 struct liodn_id_table {
 	const char * compat;
 	u32 id[2];
 	u8 num_ids;
 	phys_addr_t compat_offset;
 	unsigned long reg_offset;
 };

 struct fman_liodn_id_table {
 	/* Freescale FMan Device Tree binding was updated for FMan.
 	 * We need to support both new and old compatibles in order not to
 	 * break backward compatibility.
 	 */
 	const char *compat[2];
 	u32 id[2];
 	u8 num_ids;
 	phys_addr_t compat_offset;
 	unsigned long reg_offset;
 };

 extern u32 get_ppid_liodn(int ppid_tbl_idx, int ppid);
 extern void set_liodns(void);
 extern void fdt_fixup_liodn(void *blob);

 #define SET_LIODN_BASE_1(idA) \
 	{ .id = { idA }, .num_ids = 1, }

 #define SET_LIODN_BASE_2(idA, idB) \
 	{ .id = { idA, idB }, .num_ids = 2 }

 #define SET_FMAN_LIODN_ENTRY(name1, name2, idA, off, compatoff)\
 	{ .compat[0] = name1, \
 	  .compat[1] = name2, \
 	  .id = { idA }, .num_ids = 1, \
 	  .reg_offset = off + CONFIG_SYS_CCSRBAR, \
 	  .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
 	}

 #define SET_LIODN_ENTRY_1(name, idA, off, compatoff) \
 	{ .compat = name, \
 	  .id = { idA }, .num_ids = 1, \
 	  .reg_offset = off + CONFIG_SYS_CCSRBAR, \
 	  .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
 	}

 #define SET_LIODN_ENTRY_2(name, idA, idB, off, compatoff) \
 	{ .compat = name, \
 	  .id = { idA, idB }, .num_ids = 2, \
 	  .reg_offset = off + CONFIG_SYS_CCSRBAR, \
 	  .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
 	}

 #define SET_GUTS_LIODN(compat, liodn, name, compatoff) \
 	SET_LIODN_ENTRY_1(compat, liodn, \
 		offsetof(ccsr_gur_t, name) + CONFIG_SYS_MPC85xx_GUTS_OFFSET, \
 		compatoff)

 #define SET_USB_LIODN(usbNum, compat, liodn) \
 	SET_GUTS_LIODN(compat, liodn, usb##usbNum##liodnr,\
 		CONFIG_SYS_MPC85xx_USB##usbNum##_OFFSET)

 #define SET_SATA_LIODN(sataNum, liodn) \
 	SET_GUTS_LIODN("fsl,pq-sata-v2", liodn, sata##sataNum##liodnr,\
 		CONFIG_SYS_MPC85xx_SATA##sataNum##_OFFSET)

 #define SET_PCI_LIODN(compat, pciNum, liodn) \
 	SET_GUTS_LIODN(compat, liodn, pex##pciNum##liodnr,\
 		CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET)

 #define SET_PCI_LIODN_BASE(compat, pciNum, liodn) \
 	SET_LIODN_ENTRY_1(compat, liodn,\
 		offsetof(ccsr_pcix_t, liodn_base) + CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET,\
 		CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET)

 /* reg nodes for DMA start @ 0x300 */
 #define SET_DMA_LIODN(dmaNum, compat, liodn) \
 	SET_GUTS_LIODN(compat, liodn, dma##dmaNum##liodnr,\
 		CONFIG_SYS_MPC85xx_DMA##dmaNum##_OFFSET + 0x300)

 #define SET_SDHC_LIODN(sdhcNum, liodn) \
 	SET_GUTS_LIODN("fsl,esdhc", liodn, sdmmc##sdhcNum##liodnr,\
 		CONFIG_SYS_MPC85xx_ESDHC_OFFSET)

 #define SET_QE_LIODN(liodn) \
 	SET_GUTS_LIODN("fsl,qe", liodn, qeliodnr,\
 		CONFIG_SYS_MPC85xx_QE_OFFSET)

 #define SET_TDM_LIODN(liodn) \
 	SET_GUTS_LIODN("fsl,tdm1.0", liodn, tdmliodnr,\
 		CONFIG_SYS_MPC85xx_TDM_OFFSET)

 #define SET_QMAN_LIODN(liodn) \
 	SET_LIODN_ENTRY_1("fsl,qman", liodn, \
 		offsetof(struct ccsr_qman, liodnr) + \
 		CONFIG_SYS_FSL_QMAN_OFFSET, \
 		CONFIG_SYS_FSL_QMAN_OFFSET)

 #define SET_BMAN_LIODN(liodn) \
 	SET_LIODN_ENTRY_1("fsl,bman", liodn, \
 		offsetof(struct ccsr_bman, liodnr) + \
 		CONFIG_SYS_FSL_BMAN_OFFSET, \
 		CONFIG_SYS_FSL_BMAN_OFFSET)

 #define SET_PME_LIODN(liodn) \
 	SET_LIODN_ENTRY_1("fsl,pme", liodn, offsetof(ccsr_pme_t, liodnr) + \
 		CONFIG_SYS_FSL_CORENET_PME_OFFSET, \
 		CONFIG_SYS_FSL_CORENET_PME_OFFSET)

 #define SET_PMAN_LIODN(num, liodn) \
 	SET_LIODN_ENTRY_2("fsl,pman", liodn, 0, \
 		offsetof(struct ccsr_pman, ppa1) + \
 		CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET, \
 		CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET)

 /* -1 from portID due to how immap has the registers */
 #define FM_PPID_RX_PORT_OFFSET(fmNum, portID) \
 	CONFIG_SYS_FSL_FM##fmNum##_OFFSET + \
 	offsetof(struct ccsr_fman, fm_bmi_common.fmbm_ppid[portID - 1])

 #ifdef CONFIG_SYS_FMAN_V3
 /* enetNum is 0, 1, 2... so we + 8 for 1g to get to HW Port ID */
 #define SET_FMAN_RX_1G_LIODN(fmNum, enetNum, liodn) \
 	SET_FMAN_LIODN_ENTRY("fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx", \
 		liodn, FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 8), \
 		CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_1G_OFFSET)

 /* enetNum is 0, 1, 2... so we + 16 for 10g to get to HW Port ID */
 #define SET_FMAN_RX_10G_LIODN(fmNum, enetNum, liodn) \
 	SET_FMAN_LIODN_ENTRY("fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx", \
 		liodn, FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 16), \
 		CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_10G_OFFSET)

 /* enetNum is 0, 1, 2... so we + 8 for type-2 10g to get to HW Port ID */
 #define SET_FMAN_RX_10G_TYPE2_LIODN(fmNum, enetNum, liodn) \
 	SET_FMAN_LIODN_ENTRY("fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx", \
 		liodn, FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 8), \
 		CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_1G_OFFSET)
 #else
 /* enetNum is 0, 1, 2... so we + 8 for 1g to get to HW Port ID */
 #define SET_FMAN_RX_1G_LIODN(fmNum, enetNum, liodn) \
 	SET_FMAN_LIODN_ENTRY("fsl,fman-v2-port-rx", "fsl,fman-port-1g-rx", \
 		liodn, FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 8), \
 		CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_1G_OFFSET)

 /* enetNum is 0, 1, 2... so we + 16 for 10g to get to HW Port ID */
 #define SET_FMAN_RX_10G_LIODN(fmNum, enetNum, liodn) \
 	SET_FMAN_LIODN_ENTRY("fsl,fman-v2-port-rx", "fsl,fman-port-10g-rx", \
 		liodn, FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 16), \
 		CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_10G_OFFSET)
 #endif
 /*
  * handle both old and new versioned SEC properties:
  * "fsl,secX.Y" became "fsl,sec-vX.Y" during development
  */
 #define SET_SEC_JR_LIODN_ENTRY(jrNum, liodnA, liodnB) \
 	SET_LIODN_ENTRY_2("fsl,sec4.0-job-ring", liodnA, liodnB,\
 		offsetof(ccsr_sec_t, jrliodnr[jrNum].ls) + \
 		CONFIG_SYS_FSL_SEC_OFFSET, \
 		CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrNum), \
 	SET_LIODN_ENTRY_2("fsl,sec-v4.0-job-ring", liodnA, liodnB,\
 		offsetof(ccsr_sec_t, jrliodnr[jrNum].ls) + \
 		CONFIG_SYS_FSL_SEC_OFFSET, \
 		CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrNum)

 /* This is a bit evil since we treat rtic param as both a string & hex value */
 #define SET_SEC_RTIC_LIODN_ENTRY(rtic, liodnA) \
 	SET_LIODN_ENTRY_1("fsl,sec4.0-rtic-memory", \
 		liodnA,	\
 		offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \
 		CONFIG_SYS_FSL_SEC_OFFSET, \
 		CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa)), \
 	SET_LIODN_ENTRY_1("fsl,sec-v4.0-rtic-memory", \
 		liodnA,	\
 		offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \
 		CONFIG_SYS_FSL_SEC_OFFSET, \
 		CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa))

 #define SET_SEC_DECO_LIODN_ENTRY(num, liodnA, liodnB) \
 	SET_LIODN_ENTRY_2(NULL, liodnA, liodnB, \
 		offsetof(ccsr_sec_t, decoliodnr[num].ls) + \
 		CONFIG_SYS_FSL_SEC_OFFSET, 0)

 #define SET_RAID_ENGINE_JQ_LIODN_ENTRY(jqNum, rNum, liodnA) \
 	SET_LIODN_ENTRY_1("fsl,raideng-v1.0-job-ring", \
 	liodnA, \
 	offsetof(struct ccsr_raide, jq[jqNum].ring[rNum].cfg1) + \
 	CONFIG_SYS_FSL_RAID_ENGINE_OFFSET, \
 	offsetof(struct ccsr_raide, jq[jqNum].ring[rNum].cfg0) + \
 	CONFIG_SYS_FSL_RAID_ENGINE_OFFSET)

 #define SET_RMAN_LIODN(ibNum, liodn) \
 	SET_LIODN_ENTRY_1("fsl,rman-inbound-block", liodn, \
 		offsetof(struct ccsr_rman, mmitdr) + \
 		CONFIG_SYS_FSL_CORENET_RMAN_OFFSET, \
 		CONFIG_SYS_FSL_CORENET_RMAN_OFFSET + ibNum * 0x1000)

 extern struct liodn_id_table liodn_tbl[], liodn_bases[], sec_liodn_tbl[];
 extern struct liodn_id_table raide_liodn_tbl[];
 extern struct fman_liodn_id_table fman1_liodn_tbl[], fman2_liodn_tbl[];
 #ifdef CONFIG_SYS_SRIO
 extern struct srio_liodn_id_table srio_liodn_tbl[];
 extern int srio_liodn_tbl_sz;
 #endif
 extern struct liodn_id_table rman_liodn_tbl[];
 extern int liodn_tbl_sz, sec_liodn_tbl_sz, raide_liodn_tbl_sz;
 extern int fman1_liodn_tbl_sz, fman2_liodn_tbl_sz;
 extern int rman_liodn_tbl_sz;

 #endif
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* Copyright 2009-2011 Freescale Semiconductor, Inc.
	*/

	#ifndef _FSL_LIODN_H_
	#define _FSL_LIODN_H_

	#include <asm/types.h>
	#include <fsl_qbman.h>

	struct srio_liodn_id_table {
	u32 id[2];
	unsigned long reg_offset[2];
	u8 num_ids;
	u8 portid;
	};
	#define SET_SRIO_LIODN_1(port, idA) \
	{ .id = { idA }, .num_ids = 1, .portid = port, \
	.reg_offset[0] = offsetof(ccsr_gur_t, rio##port##liodnr) \
	+ CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \
	}

	#define SET_SRIO_LIODN_2(port, idA, idB) \
	{ .id = { idA, idB }, .num_ids = 2, .portid = port, \
	.reg_offset[0] = offsetof(ccsr_gur_t, rio##port##liodnr) \
	+ CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \
	.reg_offset[1] = offsetof(ccsr_gur_t, rio##port##maintliodnr) \
	+ CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \
	}

	#define SET_SRIO_LIODN_BASE(port, id_a) \
	{ .id = { id_a }, .num_ids = 1, .portid = port, \
	.reg_offset[0] = offsetof(struct ccsr_rio, liodn) \
	+ (port - 1) * 0x200 \
	+ CONFIG_SYS_FSL_SRIO_ADDR, \
	}

	struct liodn_id_table {
	const char * compat;
	u32 id[2];
	u8 num_ids;
	phys_addr_t compat_offset;
	unsigned long reg_offset;
	};

	struct fman_liodn_id_table {
	/* Freescale FMan Device Tree binding was updated for FMan.
	* We need to support both new and old compatibles in order not to
	* break backward compatibility.
	*/
	const char *compat[2];
	u32 id[2];
	u8 num_ids;
	phys_addr_t compat_offset;
	unsigned long reg_offset;
	};

	extern u32 get_ppid_liodn(int ppid_tbl_idx, int ppid);
	extern void set_liodns(void);
	extern void fdt_fixup_liodn(void *blob);

	#define SET_LIODN_BASE_1(idA) \
	{ .id = { idA }, .num_ids = 1, }

	#define SET_LIODN_BASE_2(idA, idB) \
	{ .id = { idA, idB }, .num_ids = 2 }

	#define SET_FMAN_LIODN_ENTRY(name1, name2, idA, off, compatoff)\
	{ .compat[0] = name1, \
	.compat[1] = name2, \
	.id = { idA }, .num_ids = 1, \
	.reg_offset = off + CONFIG_SYS_CCSRBAR, \
	.compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
	}

	#define SET_LIODN_ENTRY_1(name, idA, off, compatoff) \
	{ .compat = name, \
	.id = { idA }, .num_ids = 1, \
	.reg_offset = off + CONFIG_SYS_CCSRBAR, \
	.compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
	}

	#define SET_LIODN_ENTRY_2(name, idA, idB, off, compatoff) \
	{ .compat = name, \
	.id = { idA, idB }, .num_ids = 2, \
	.reg_offset = off + CONFIG_SYS_CCSRBAR, \
	.compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
	}

	#define SET_GUTS_LIODN(compat, liodn, name, compatoff) \
	SET_LIODN_ENTRY_1(compat, liodn, \
	offsetof(ccsr_gur_t, name) + CONFIG_SYS_MPC85xx_GUTS_OFFSET, \
	compatoff)

	#define SET_USB_LIODN(usbNum, compat, liodn) \
	SET_GUTS_LIODN(compat, liodn, usb##usbNum##liodnr,\
	CONFIG_SYS_MPC85xx_USB##usbNum##_OFFSET)

	#define SET_SATA_LIODN(sataNum, liodn) \
	SET_GUTS_LIODN("fsl,pq-sata-v2", liodn, sata##sataNum##liodnr,\
	CONFIG_SYS_MPC85xx_SATA##sataNum##_OFFSET)

	#define SET_PCI_LIODN(compat, pciNum, liodn) \
	SET_GUTS_LIODN(compat, liodn, pex##pciNum##liodnr,\
	CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET)

	#define SET_PCI_LIODN_BASE(compat, pciNum, liodn) \
	SET_LIODN_ENTRY_1(compat, liodn,\
	offsetof(ccsr_pcix_t, liodn_base) + CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET,\
	CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET)

	/* reg nodes for DMA start @ 0x300 */
	#define SET_DMA_LIODN(dmaNum, compat, liodn) \
	SET_GUTS_LIODN(compat, liodn, dma##dmaNum##liodnr,\
	CONFIG_SYS_MPC85xx_DMA##dmaNum##_OFFSET + 0x300)

	#define SET_SDHC_LIODN(sdhcNum, liodn) \
	SET_GUTS_LIODN("fsl,esdhc", liodn, sdmmc##sdhcNum##liodnr,\
	CONFIG_SYS_MPC85xx_ESDHC_OFFSET)

	#define SET_QE_LIODN(liodn) \
	SET_GUTS_LIODN("fsl,qe", liodn, qeliodnr,\
	CONFIG_SYS_MPC85xx_QE_OFFSET)

	#define SET_TDM_LIODN(liodn) \
	SET_GUTS_LIODN("fsl,tdm1.0", liodn, tdmliodnr,\
	CONFIG_SYS_MPC85xx_TDM_OFFSET)

	#define SET_QMAN_LIODN(liodn) \
	SET_LIODN_ENTRY_1("fsl,qman", liodn, \
	offsetof(struct ccsr_qman, liodnr) + \
	CONFIG_SYS_FSL_QMAN_OFFSET, \
	CONFIG_SYS_FSL_QMAN_OFFSET)

	#define SET_BMAN_LIODN(liodn) \
	SET_LIODN_ENTRY_1("fsl,bman", liodn, \
	offsetof(struct ccsr_bman, liodnr) + \
	CONFIG_SYS_FSL_BMAN_OFFSET, \
	CONFIG_SYS_FSL_BMAN_OFFSET)

	#define SET_PME_LIODN(liodn) \
	SET_LIODN_ENTRY_1("fsl,pme", liodn, offsetof(ccsr_pme_t, liodnr) + \
	CONFIG_SYS_FSL_CORENET_PME_OFFSET, \
	CONFIG_SYS_FSL_CORENET_PME_OFFSET)

	#define SET_PMAN_LIODN(num, liodn) \
	SET_LIODN_ENTRY_2("fsl,pman", liodn, 0, \
	offsetof(struct ccsr_pman, ppa1) + \
	CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET, \
	CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET)

	/* -1 from portID due to how immap has the registers */
	#define FM_PPID_RX_PORT_OFFSET(fmNum, portID) \
	CONFIG_SYS_FSL_FM##fmNum##_OFFSET + \
	offsetof(struct ccsr_fman, fm_bmi_common.fmbm_ppid[portID - 1])

	#ifdef CONFIG_SYS_FMAN_V3
	/* enetNum is 0, 1, 2... so we + 8 for 1g to get to HW Port ID */
	#define SET_FMAN_RX_1G_LIODN(fmNum, enetNum, liodn) \
	SET_FMAN_LIODN_ENTRY("fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx", \
	liodn, FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 8), \
	CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_1G_OFFSET)

	/* enetNum is 0, 1, 2... so we + 16 for 10g to get to HW Port ID */
	#define SET_FMAN_RX_10G_LIODN(fmNum, enetNum, liodn) \
	SET_FMAN_LIODN_ENTRY("fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx", \
	liodn, FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 16), \
	CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_10G_OFFSET)

	/* enetNum is 0, 1, 2... so we + 8 for type-2 10g to get to HW Port ID */
	#define SET_FMAN_RX_10G_TYPE2_LIODN(fmNum, enetNum, liodn) \
	SET_FMAN_LIODN_ENTRY("fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx", \
	liodn, FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 8), \
	CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_1G_OFFSET)
	#else
	/* enetNum is 0, 1, 2... so we + 8 for 1g to get to HW Port ID */
	#define SET_FMAN_RX_1G_LIODN(fmNum, enetNum, liodn) \
	SET_FMAN_LIODN_ENTRY("fsl,fman-v2-port-rx", "fsl,fman-port-1g-rx", \
	liodn, FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 8), \
	CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_1G_OFFSET)

	/* enetNum is 0, 1, 2... so we + 16 for 10g to get to HW Port ID */
	#define SET_FMAN_RX_10G_LIODN(fmNum, enetNum, liodn) \
	SET_FMAN_LIODN_ENTRY("fsl,fman-v2-port-rx", "fsl,fman-port-10g-rx", \
	liodn, FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 16), \
	CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_10G_OFFSET)
	#endif
	/*
	* handle both old and new versioned SEC properties:
	* "fsl,secX.Y" became "fsl,sec-vX.Y" during development
	*/
	#define SET_SEC_JR_LIODN_ENTRY(jrNum, liodnA, liodnB) \
	SET_LIODN_ENTRY_2("fsl,sec4.0-job-ring", liodnA, liodnB,\
	offsetof(ccsr_sec_t, jrliodnr[jrNum].ls) + \
	CONFIG_SYS_FSL_SEC_OFFSET, \
	CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrNum), \
	SET_LIODN_ENTRY_2("fsl,sec-v4.0-job-ring", liodnA, liodnB,\
	offsetof(ccsr_sec_t, jrliodnr[jrNum].ls) + \
	CONFIG_SYS_FSL_SEC_OFFSET, \
	CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrNum)

	/* This is a bit evil since we treat rtic param as both a string & hex value */
	#define SET_SEC_RTIC_LIODN_ENTRY(rtic, liodnA) \
	SET_LIODN_ENTRY_1("fsl,sec4.0-rtic-memory", \
	liodnA, \
	offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \
	CONFIG_SYS_FSL_SEC_OFFSET, \
	CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa)), \
	SET_LIODN_ENTRY_1("fsl,sec-v4.0-rtic-memory", \
	liodnA, \
	offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \
	CONFIG_SYS_FSL_SEC_OFFSET, \
	CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa))

	#define SET_SEC_DECO_LIODN_ENTRY(num, liodnA, liodnB) \
	SET_LIODN_ENTRY_2(NULL, liodnA, liodnB, \
	offsetof(ccsr_sec_t, decoliodnr[num].ls) + \
	CONFIG_SYS_FSL_SEC_OFFSET, 0)

	#define SET_RAID_ENGINE_JQ_LIODN_ENTRY(jqNum, rNum, liodnA) \
	SET_LIODN_ENTRY_1("fsl,raideng-v1.0-job-ring", \
	liodnA, \
	offsetof(struct ccsr_raide, jq[jqNum].ring[rNum].cfg1) + \
	CONFIG_SYS_FSL_RAID_ENGINE_OFFSET, \
	offsetof(struct ccsr_raide, jq[jqNum].ring[rNum].cfg0) + \
	CONFIG_SYS_FSL_RAID_ENGINE_OFFSET)

	#define SET_RMAN_LIODN(ibNum, liodn) \
	SET_LIODN_ENTRY_1("fsl,rman-inbound-block", liodn, \
	offsetof(struct ccsr_rman, mmitdr) + \
	CONFIG_SYS_FSL_CORENET_RMAN_OFFSET, \
	CONFIG_SYS_FSL_CORENET_RMAN_OFFSET + ibNum * 0x1000)

	extern struct liodn_id_table liodn_tbl[], liodn_bases[], sec_liodn_tbl[];
	extern struct liodn_id_table raide_liodn_tbl[];
	extern struct fman_liodn_id_table fman1_liodn_tbl[], fman2_liodn_tbl[];
	#ifdef CONFIG_SYS_SRIO
	extern struct srio_liodn_id_table srio_liodn_tbl[];
	extern int srio_liodn_tbl_sz;
	#endif
	extern struct liodn_id_table rman_liodn_tbl[];
	extern int liodn_tbl_sz, sec_liodn_tbl_sz, raide_liodn_tbl_sz;
	extern int fman1_liodn_tbl_sz, fman2_liodn_tbl_sz;
	extern int rman_liodn_tbl_sz;

	#endif