| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * SchulerControl GmbH, SC_SPS_1 module setup |
| * |
| * Copyright (C) 2012 Marek Vasut <marex@denx.de> |
| * on behalf of DENX Software Engineering GmbH |
| */ |
| |
| #include <common.h> |
| #include <config.h> |
| #include <asm/io.h> |
| #include <asm/arch/iomux-mx28.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/sys_proto.h> |
| |
| #define MUX_CONFIG_LED (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) |
| #define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP) |
| #define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP) |
| #define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL) |
| #define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL) |
| |
| const iomux_cfg_t iomux_setup[] = { |
| /* -- Strick 3 -- */ |
| |
| /* FEC Ethernet */ |
| MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET, |
| |
| MX28_PAD_ENET0_TX_CLK__GPIO_4_5, /* ENET INT */ |
| |
| MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET, |
| MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET, |
| |
| /* -- Strick 4 -- */ |
| |
| /* EMI */ |
| MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI, |
| |
| MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI, |
| |
| MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI, |
| |
| MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI, |
| |
| MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI, |
| |
| /* -- Strick 5 -- */ |
| |
| /* MMC0 */ |
| MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0, |
| MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0, |
| MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0, |
| MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0, |
| MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0, |
| MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | |
| (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), |
| MX28_PAD_SSP0_SCK__SSP0_SCK | |
| (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), |
| |
| /* SPI2 (for flash) */ |
| MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2, |
| MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2, |
| MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2, |
| MX28_PAD_SSP2_SS0__SSP2_D3 | |
| (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP), |
| |
| /* -- Strick 6 -- */ |
| |
| /* I2C */ |
| MX28_PAD_I2C0_SCL__I2C0_SCL, |
| MX28_PAD_I2C0_SDA__I2C0_SDA, |
| |
| /* AUART0 */ |
| MX28_PAD_AUART0_TX__AUART0_TX, |
| MX28_PAD_AUART0_RX__AUART0_RX, |
| |
| /* MEGA interface */ |
| |
| /* Debug UART */ |
| MX28_PAD_PWM0__DUART_RX, |
| MX28_PAD_PWM1__DUART_TX, |
| |
| /* LED */ |
| MX28_PAD_GPMI_D00__GPIO_0_0 | MUX_CONFIG_LED, |
| MX28_PAD_GPMI_D03__GPIO_0_3 | MUX_CONFIG_LED, |
| MX28_PAD_GPMI_D06__GPIO_0_6 | MUX_CONFIG_LED, |
| }; |
| |
| void board_init_ll(const uint32_t arg, const uint32_t *resptr) |
| { |
| mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup)); |
| } |
| |
| void mxs_adjust_memory_params(uint32_t *dram_vals) |
| { |
| dram_vals[0x74 >> 2] = 0x0f02010a; |
| } |