| /* | |
| **===================================================================== | |
| ** | |
| ** Copyright (C) 2000, 2001, 2002, 2003 | |
| ** The LEOX team <team@leox.org>, http://www.leox.org | |
| ** | |
| ** LEOX.org is about the development of free hardware and software resources | |
| ** for system on chip. | |
| ** | |
| ** Description: U-Boot port on the LEOX's ELPT860 CPU board | |
| ** ~~~~~~~~~~~ | |
| ** | |
| **===================================================================== | |
| ** | |
| ** This program is free software; you can redistribute it and/or | |
| ** modify it under the terms of the GNU General Public License as | |
| ** published by the Free Software Foundation; either version 2 of | |
| ** the License, or (at your option) any later version. | |
| ** | |
| ** This program is distributed in the hope that it will be useful, | |
| ** but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| ** GNU General Public License for more details. | |
| ** | |
| ** You should have received a copy of the GNU General Public License | |
| ** along with this program; if not, write to the Free Software | |
| ** Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| ** MA 02111-1307 USA | |
| ** | |
| **===================================================================== | |
| */ | |
| /* | |
| ** Note 1: In this file, you have to provide the following variable: | |
| ** ------ | |
| ** flash_info_t flash_info[CFG_MAX_FLASH_BANKS] | |
| ** 'flash_info_t' structure is defined into 'include/flash.h' | |
| ** and defined as extern into 'common/cmd_flash.c' | |
| ** | |
| ** Note 2: In this file, you have to provide the following functions: | |
| ** ------ | |
| ** unsigned long flash_init(void) | |
| ** called from 'board_init_r()' into 'common/board.c' | |
| ** | |
| ** void flash_print_info(flash_info_t *info) | |
| ** called from 'do_flinfo()' into 'common/cmd_flash.c' | |
| ** | |
| ** int flash_erase(flash_info_t *info, | |
| ** int s_first, | |
| ** int s_last) | |
| ** called from 'do_flerase()' & 'flash_sect_erase()' into 'common/cmd_flash.c' | |
| ** | |
| ** int write_buff (flash_info_t *info, | |
| ** uchar *src, | |
| ** ulong addr, | |
| ** ulong cnt) | |
| ** called from 'flash_write()' into 'common/cmd_flash.c' | |
| */ | |
| #include <common.h> | |
| #include <mpc8xx.h> | |
| #ifndef CFG_ENV_ADDR | |
| # define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET) | |
| #endif | |
| flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ | |
| /*----------------------------------------------------------------------- | |
| * Internal Functions | |
| */ | |
| static void flash_get_offsets (ulong base, flash_info_t *info); | |
| static ulong flash_get_size (volatile unsigned char *addr, flash_info_t *info); | |
| static int write_word (flash_info_t *info, ulong dest, ulong data); | |
| static int write_byte (flash_info_t *info, ulong dest, uchar data); | |
| /*----------------------------------------------------------------------- | |
| */ | |
| unsigned long | |
| flash_init (void) | |
| { | |
| volatile immap_t *immap = (immap_t *)CFG_IMMR; | |
| volatile memctl8xx_t *memctl = &immap->im_memctl; | |
| unsigned long size_b0; | |
| int i; | |
| /* Init: no FLASHes known */ | |
| for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) | |
| { | |
| flash_info[i].flash_id = FLASH_UNKNOWN; | |
| } | |
| /* Static FLASH Bank configuration here - FIXME XXX */ | |
| size_b0 = flash_get_size ((volatile unsigned char *)FLASH_BASE0_PRELIM, | |
| &flash_info[0]); | |
| if ( flash_info[0].flash_id == FLASH_UNKNOWN ) | |
| { | |
| printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", | |
| size_b0, size_b0<<20); | |
| } | |
| /* Remap FLASH according to real size */ | |
| memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK); | |
| memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_PS_8 | BR_V; | |
| /* Re-do sizing to get full correct info */ | |
| size_b0 = flash_get_size ((volatile unsigned char *)CFG_FLASH_BASE, | |
| &flash_info[0]); | |
| flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]); | |
| #if CFG_MONITOR_BASE >= CFG_FLASH_BASE | |
| /* monitor protection ON by default */ | |
| flash_protect (FLAG_PROTECT_SET, | |
| CFG_MONITOR_BASE, | |
| CFG_MONITOR_BASE + monitor_flash_len-1, | |
| &flash_info[0]); | |
| #endif | |
| #ifdef CFG_ENV_IS_IN_FLASH | |
| /* ENV protection ON by default */ | |
| flash_protect(FLAG_PROTECT_SET, | |
| CFG_ENV_ADDR, | |
| CFG_ENV_ADDR + CFG_ENV_SIZE-1, | |
| &flash_info[0]); | |
| #endif | |
| flash_info[0].size = size_b0; | |
| return (size_b0); | |
| } | |
| /*----------------------------------------------------------------------- | |
| */ | |
| static void | |
| flash_get_offsets (ulong base, | |
| flash_info_t *info) | |
| { | |
| int i; | |
| #define SECTOR_64KB 0x00010000 | |
| /* set up sector start adress table */ | |
| for (i = 0; i < info->sector_count; i++) | |
| { | |
| info->start[i] = base + (i * SECTOR_64KB); | |
| } | |
| } | |
| /*----------------------------------------------------------------------- | |
| */ | |
| void | |
| flash_print_info (flash_info_t *info) | |
| { | |
| int i; | |
| if ( info->flash_id == FLASH_UNKNOWN ) | |
| { | |
| printf ("missing or unknown FLASH type\n"); | |
| return; | |
| } | |
| switch ( info->flash_id & FLASH_VENDMASK ) | |
| { | |
| case FLASH_MAN_AMD: printf ("AMD "); break; | |
| case FLASH_MAN_FUJ: printf ("FUJITSU "); break; | |
| case FLASH_MAN_STM: printf ("STM (Thomson) "); break; | |
| default: printf ("Unknown Vendor "); break; | |
| } | |
| switch ( info->flash_id & FLASH_TYPEMASK ) | |
| { | |
| case FLASH_AM040: printf ("AM29F040 (4 Mbits)\n"); | |
| break; | |
| default: printf ("Unknown Chip Type\n"); | |
| break; | |
| } | |
| printf (" Size: %ld KB in %d Sectors\n", | |
| info->size >> 10, info->sector_count); | |
| printf (" Sector Start Addresses:"); | |
| for (i=0; i<info->sector_count; ++i) | |
| { | |
| if ((i % 5) == 0) | |
| printf ("\n "); | |
| printf (" %08lX%s", | |
| info->start[i], | |
| info->protect[i] ? " (RO)" : " " | |
| ); | |
| } | |
| printf ("\n"); | |
| return; | |
| } | |
| /*----------------------------------------------------------------------- | |
| */ | |
| /*----------------------------------------------------------------------- | |
| */ | |
| /* | |
| * The following code cannot be run from FLASH! | |
| */ | |
| static ulong | |
| flash_get_size (volatile unsigned char *addr, | |
| flash_info_t *info) | |
| { | |
| short i; | |
| uchar value; | |
| ulong base = (ulong)addr; | |
| /* Write auto select command: read Manufacturer ID */ | |
| addr[0x0555] = 0xAA; | |
| addr[0x02AA] = 0x55; | |
| addr[0x0555] = 0x90; | |
| value = addr[0]; | |
| switch ( value ) | |
| { | |
| /* case AMD_MANUFACT: */ | |
| case 0x01: | |
| info->flash_id = FLASH_MAN_AMD; | |
| break; | |
| /* case FUJ_MANUFACT: */ | |
| case 0x04: | |
| info->flash_id = FLASH_MAN_FUJ; | |
| break; | |
| /* case STM_MANUFACT: */ | |
| case 0x20: | |
| info->flash_id = FLASH_MAN_STM; | |
| break; | |
| default: | |
| info->flash_id = FLASH_UNKNOWN; | |
| info->sector_count = 0; | |
| info->size = 0; | |
| return (0); /* no or unknown flash */ | |
| } | |
| value = addr[1]; /* device ID */ | |
| switch ( value ) | |
| { | |
| case STM_ID_F040B: | |
| case AMD_ID_F040B: | |
| info->flash_id += FLASH_AM040; /* 4 Mbits = 512k * 8 */ | |
| info->sector_count = 8; | |
| info->size = 0x00080000; | |
| break; | |
| default: | |
| info->flash_id = FLASH_UNKNOWN; | |
| return (0); /* => no or unknown flash */ | |
| } | |
| /* set up sector start adress table */ | |
| for (i = 0; i < info->sector_count; i++) | |
| { | |
| info->start[i] = base + (i * 0x00010000); | |
| } | |
| /* check for protected sectors */ | |
| for (i = 0; i < info->sector_count; i++) | |
| { | |
| /* read sector protection at sector address, (A7 .. A0) = 0x02 */ | |
| /* D0 = 1 if protected */ | |
| addr = (volatile unsigned char *)(info->start[i]); | |
| info->protect[i] = addr[2] & 1; | |
| } | |
| /* | |
| * Prevent writes to uninitialized FLASH. | |
| */ | |
| if ( info->flash_id != FLASH_UNKNOWN ) | |
| { | |
| addr = (volatile unsigned char *)info->start[0]; | |
| *addr = 0xF0; /* reset bank */ | |
| } | |
| return (info->size); | |
| } | |
| /*----------------------------------------------------------------------- | |
| */ | |
| int | |
| flash_erase (flash_info_t *info, | |
| int s_first, | |
| int s_last) | |
| { | |
| volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]); | |
| int flag, prot, sect, l_sect; | |
| ulong start, now, last; | |
| if ( (s_first < 0) || (s_first > s_last) ) | |
| { | |
| if ( info->flash_id == FLASH_UNKNOWN ) | |
| { | |
| printf ("- missing\n"); | |
| } | |
| else | |
| { | |
| printf ("- no sectors to erase\n"); | |
| } | |
| return ( 1 ); | |
| } | |
| if ( (info->flash_id == FLASH_UNKNOWN) || | |
| (info->flash_id > FLASH_AMD_COMP) ) | |
| { | |
| printf ("Can't erase unknown flash type %08lx - aborted\n", | |
| info->flash_id); | |
| return ( 1 ); | |
| } | |
| prot = 0; | |
| for (sect=s_first; sect<=s_last; ++sect) | |
| { | |
| if ( info->protect[sect] ) | |
| { | |
| prot++; | |
| } | |
| } | |
| if ( prot ) | |
| { | |
| printf ("- Warning: %d protected sectors will not be erased!\n", prot); | |
| } | |
| else | |
| { | |
| printf ("\n"); | |
| } | |
| l_sect = -1; | |
| /* Disable interrupts which might cause a timeout here */ | |
| flag = disable_interrupts(); | |
| addr[0x0555] = 0xAA; | |
| addr[0x02AA] = 0x55; | |
| addr[0x0555] = 0x80; | |
| addr[0x0555] = 0xAA; | |
| addr[0x02AA] = 0x55; | |
| /* Start erase on unprotected sectors */ | |
| for (sect = s_first; sect<=s_last; sect++) | |
| { | |
| if (info->protect[sect] == 0) /* not protected */ | |
| { | |
| addr = (volatile unsigned char *)(info->start[sect]); | |
| addr[0] = 0x30; | |
| l_sect = sect; | |
| } | |
| } | |
| /* re-enable interrupts if necessary */ | |
| if ( flag ) | |
| enable_interrupts(); | |
| /* wait at least 80us - let's wait 1 ms */ | |
| udelay (1000); | |
| /* | |
| * We wait for the last triggered sector | |
| */ | |
| if ( l_sect < 0 ) | |
| goto DONE; | |
| start = get_timer (0); | |
| last = start; | |
| addr = (volatile unsigned char *)(info->start[l_sect]); | |
| while ( (addr[0] & 0x80) != 0x80 ) | |
| { | |
| if ( (now = get_timer(start)) > CFG_FLASH_ERASE_TOUT ) | |
| { | |
| printf ("Timeout\n"); | |
| return ( 1 ); | |
| } | |
| /* show that we're waiting */ | |
| if ( (now - last) > 1000 ) /* every second */ | |
| { | |
| putc ('.'); | |
| last = now; | |
| } | |
| } | |
| DONE: | |
| /* reset to read mode */ | |
| addr = (volatile unsigned char *)info->start[0]; | |
| addr[0] = 0xF0; /* reset bank */ | |
| printf (" done\n"); | |
| return ( 0 ); | |
| } | |
| /*----------------------------------------------------------------------- | |
| * Copy memory to flash, returns: | |
| * 0 - OK | |
| * 1 - write timeout | |
| * 2 - Flash not erased | |
| */ | |
| int | |
| write_buff (flash_info_t *info, | |
| uchar *src, | |
| ulong addr, | |
| ulong cnt) | |
| { | |
| ulong cp, wp, data; | |
| uchar bdata; | |
| int i, l, rc; | |
| if ( (info->flash_id & FLASH_TYPEMASK) == FLASH_AM040 ) | |
| { | |
| /* Width of the data bus: 8 bits */ | |
| wp = addr; | |
| while ( cnt ) | |
| { | |
| bdata = *src++; | |
| if ( (rc = write_byte(info, wp, bdata)) != 0 ) | |
| { | |
| return (rc); | |
| } | |
| ++wp; | |
| --cnt; | |
| } | |
| return ( 0 ); | |
| } | |
| else | |
| { | |
| /* Width of the data bus: 32 bits */ | |
| wp = (addr & ~3); /* get lower word aligned address */ | |
| /* | |
| * handle unaligned start bytes | |
| */ | |
| if ( (l = addr - wp) != 0 ) | |
| { | |
| data = 0; | |
| for (i=0, cp=wp; i<l; ++i, ++cp) | |
| { | |
| data = (data << 8) | (*(uchar *)cp); | |
| } | |
| for (; i<4 && cnt>0; ++i) | |
| { | |
| data = (data << 8) | *src++; | |
| --cnt; | |
| ++cp; | |
| } | |
| for (; cnt==0 && i<4; ++i, ++cp) | |
| { | |
| data = (data << 8) | (*(uchar *)cp); | |
| } | |
| if ( (rc = write_word(info, wp, data)) != 0 ) | |
| { | |
| return (rc); | |
| } | |
| wp += 4; | |
| } | |
| /* | |
| * handle word aligned part | |
| */ | |
| while ( cnt >= 4 ) | |
| { | |
| data = 0; | |
| for (i=0; i<4; ++i) | |
| { | |
| data = (data << 8) | *src++; | |
| } | |
| if ( (rc = write_word(info, wp, data)) != 0 ) | |
| { | |
| return (rc); | |
| } | |
| wp += 4; | |
| cnt -= 4; | |
| } | |
| if ( cnt == 0 ) | |
| { | |
| return (0); | |
| } | |
| /* | |
| * handle unaligned tail bytes | |
| */ | |
| data = 0; | |
| for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) | |
| { | |
| data = (data << 8) | *src++; | |
| --cnt; | |
| } | |
| for (; i<4; ++i, ++cp) | |
| { | |
| data = (data << 8) | (*(uchar *)cp); | |
| } | |
| return (write_word(info, wp, data)); | |
| } | |
| } | |
| /*----------------------------------------------------------------------- | |
| * Write a word to Flash, returns: | |
| * 0 - OK | |
| * 1 - write timeout | |
| * 2 - Flash not erased | |
| */ | |
| static int | |
| write_word (flash_info_t *info, | |
| ulong dest, | |
| ulong data) | |
| { | |
| vu_long *addr = (vu_long*)(info->start[0]); | |
| ulong start; | |
| int flag; | |
| /* Check if Flash is (sufficiently) erased */ | |
| if ( (*((vu_long *)dest) & data) != data ) | |
| { | |
| return (2); | |
| } | |
| /* Disable interrupts which might cause a timeout here */ | |
| flag = disable_interrupts(); | |
| addr[0x0555] = 0x00AA00AA; | |
| addr[0x02AA] = 0x00550055; | |
| addr[0x0555] = 0x00A000A0; | |
| *((vu_long *)dest) = data; | |
| /* re-enable interrupts if necessary */ | |
| if ( flag ) | |
| enable_interrupts(); | |
| /* data polling for D7 */ | |
| start = get_timer (0); | |
| while ( (*((vu_long *)dest) & 0x00800080) != (data & 0x00800080) ) | |
| { | |
| if ( get_timer(start) > CFG_FLASH_WRITE_TOUT ) | |
| { | |
| return (1); | |
| } | |
| } | |
| return (0); | |
| } | |
| /*----------------------------------------------------------------------- | |
| * Write a byte to Flash, returns: | |
| * 0 - OK | |
| * 1 - write timeout | |
| * 2 - Flash not erased | |
| */ | |
| static int | |
| write_byte (flash_info_t *info, | |
| ulong dest, | |
| uchar data) | |
| { | |
| volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]); | |
| ulong start; | |
| int flag; | |
| /* Check if Flash is (sufficiently) erased */ | |
| if ( (*((volatile unsigned char *)dest) & data) != data ) | |
| { | |
| return (2); | |
| } | |
| /* Disable interrupts which might cause a timeout here */ | |
| flag = disable_interrupts(); | |
| addr[0x0555] = 0xAA; | |
| addr[0x02AA] = 0x55; | |
| addr[0x0555] = 0xA0; | |
| *((volatile unsigned char *)dest) = data; | |
| /* re-enable interrupts if necessary */ | |
| if ( flag ) | |
| enable_interrupts(); | |
| /* data polling for D7 */ | |
| start = get_timer (0); | |
| while ( (*((volatile unsigned char *)dest) & 0x80) != (data & 0x80) ) | |
| { | |
| if ( get_timer(start) > CFG_FLASH_WRITE_TOUT ) | |
| { | |
| return (1); | |
| } | |
| } | |
| return (0); | |
| } | |
| /*----------------------------------------------------------------------- | |
| */ |