| /* | |
| * (C) Copyright 2000 | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| /* | |
| * board/config.h - configuration options, board specific | |
| */ | |
| #ifndef __CONFIG_H | |
| #define __CONFIG_H | |
| /* | |
| * High Level Configuration Options | |
| * (easy to change) | |
| */ | |
| #define CONFIG_MPC860 1 /* This is a MPC860T CPU */ | |
| #define CONFIG_HERMES 1 /* ...on a HERMES-PRO board */ | |
| #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ | |
| #undef CONFIG_8xx_CONS_SMC2 | |
| #undef CONFIG_8xx_CONS_NONE | |
| #define CONFIG_BAUDRATE 9600 | |
| #if 0 | |
| #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ | |
| #else | |
| #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ | |
| #endif | |
| #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ | |
| #define CONFIG_BOARD_TYPES 1 /* support board types */ | |
| #define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ | |
| #undef CONFIG_BOOTARGS | |
| #define CONFIG_BOOTCOMMAND \ | |
| "bootp; " \ | |
| "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ | |
| "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ | |
| "bootm" | |
| #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
| #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ | |
| #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
| #define CONFIG_COMMANDS CONFIG_CMD_DFL | |
| #define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT | |
| /*----------------------------------------------------------------------*/ | |
| /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ | |
| #include <cmd_confdefs.h> | |
| /*----------------------------------------------------------------------*/ | |
| /* | |
| * Miscellaneous configurable options | |
| */ | |
| #define CFG_LONGHELP /* undef to save memory */ | |
| #define CFG_PROMPT "=> " /* Monitor Command Prompt */ | |
| #if (CONFIG_COMMANDS & CFG_CMD_KGDB) | |
| #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| #else | |
| #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ | |
| #endif | |
| #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ | |
| #define CFG_MAXARGS 16 /* max number of command args */ | |
| #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ | |
| #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ | |
| #define CFG_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */ | |
| #define CFG_LOAD_ADDR 0x00100000 /* default load address */ | |
| #define CFG_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ | |
| #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ | |
| #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } | |
| #define CFG_ALLOC_DPRAM 1 /* use allocation routines */ | |
| /* | |
| * Low Level Configuration Settings | |
| * (address mappings, register initial values, etc.) | |
| * You should know what you are doing if you make changes here. | |
| */ | |
| /*----------------------------------------------------------------------- | |
| * Internal Memory Mapped Register | |
| */ | |
| #define CFG_IMMR 0xFF000000 /* Non-Standard value! */ | |
| /*----------------------------------------------------------------------- | |
| * Definitions for initial stack pointer and data area (in DPRAM) | |
| */ | |
| #define CFG_INIT_RAM_ADDR CFG_IMMR | |
| #define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ | |
| #define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ | |
| #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) | |
| #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET | |
| /*----------------------------------------------------------------------- | |
| * Start addresses for the final memory configuration | |
| * (Set up by the startup code) | |
| * Please note that CFG_SDRAM_BASE _must_ start at 0 | |
| */ | |
| #define CFG_SDRAM_BASE 0x00000000 | |
| #define CFG_FLASH_BASE 0xFE000000 | |
| #ifdef DEBUG | |
| #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ | |
| #else | |
| #define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ | |
| #endif | |
| #define CFG_MONITOR_BASE CFG_FLASH_BASE | |
| #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ | |
| /* | |
| * For booting Linux, the board info and command line data | |
| * have to be in the first 8 MB of memory, since this is | |
| * the maximum mapped by the Linux kernel during initialization. | |
| */ | |
| #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ | |
| /*----------------------------------------------------------------------- | |
| * FLASH organization | |
| */ | |
| #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ | |
| #define CFG_MAX_FLASH_SECT 124 /* max number of sectors on one chip */ | |
| #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ | |
| #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ | |
| #define CFG_ENV_IS_IN_FLASH 1 | |
| #define CFG_ENV_OFFSET 0x4000 /* Offset of Environment Sector */ | |
| #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ | |
| /*----------------------------------------------------------------------- | |
| * Cache Configuration | |
| */ | |
| #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ | |
| #if (CONFIG_COMMANDS & CFG_CMD_KGDB) | |
| #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ | |
| #endif | |
| /*----------------------------------------------------------------------- | |
| * SYPCR - System Protection Control 11-9 | |
| * SYPCR can only be written once after reset! | |
| *----------------------------------------------------------------------- | |
| * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze | |
| * +0x0004 | |
| */ | |
| #if defined(CONFIG_WATCHDOG) | |
| #define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ | |
| SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) | |
| #else | |
| #define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) | |
| #endif | |
| /*----------------------------------------------------------------------- | |
| * SIUMCR - SIU Module Configuration 11-6 | |
| *----------------------------------------------------------------------- | |
| * +0x0000 => 0x000000C0 | |
| */ | |
| #define CFG_SIUMCR 0 | |
| /*----------------------------------------------------------------------- | |
| * TBSCR - Time Base Status and Control 11-26 | |
| *----------------------------------------------------------------------- | |
| * Clear Reference Interrupt Status, Timebase freezing enabled | |
| * +0x0200 => 0x00C2 | |
| */ | |
| #define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) | |
| /*----------------------------------------------------------------------- | |
| * PISCR - Periodic Interrupt Status and Control 11-31 | |
| *----------------------------------------------------------------------- | |
| * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled | |
| * +0x0240 => 0x0082 | |
| */ | |
| #define CFG_PISCR (PISCR_PS | PISCR_PITF) | |
| /*----------------------------------------------------------------------- | |
| * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 | |
| *----------------------------------------------------------------------- | |
| * Reset PLL lock status sticky bit, timer expired status bit and timer | |
| * interrupt status bit, set PLL multiplication factor ! | |
| */ | |
| /* +0x0286 => 0x00B0D0C0 */ | |
| #define CFG_PLPRCR \ | |
| ( (11 << PLPRCR_MF_SHIFT) | \ | |
| PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | \ | |
| /*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL | \ | |
| PLPRCR_CSR | PLPRCR_LOLRE /*|PLPRCR_FIOPD*/ \ | |
| ) | |
| /*----------------------------------------------------------------------- | |
| * SCCR - System Clock and reset Control Register 15-27 | |
| *----------------------------------------------------------------------- | |
| * Set clock output, timebase and RTC source and divider, | |
| * power management and some other internal clocks | |
| */ | |
| #define SCCR_MASK SCCR_EBDF11 | |
| /* +0x0282 => 0x03800000 */ | |
| #define CFG_SCCR (SCCR_COM00 | SCCR_TBS | \ | |
| SCCR_RTDIV | SCCR_RTSEL | \ | |
| /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \ | |
| SCCR_EBDF00 | SCCR_DFSYNC00 | \ | |
| SCCR_DFBRG00 | SCCR_DFNL000 | \ | |
| SCCR_DFNH000) | |
| /*----------------------------------------------------------------------- | |
| * RTCSC - Real-Time Clock Status and Control Register 11-27 | |
| *----------------------------------------------------------------------- | |
| */ | |
| /* +0x0220 => 0x00C3 */ | |
| #define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) | |
| /*----------------------------------------------------------------------- | |
| * RCCR - RISC Controller Configuration Register 19-4 | |
| *----------------------------------------------------------------------- | |
| */ | |
| /* +0x09C4 => TIMEP=1 */ | |
| #define CFG_RCCR 0x0100 | |
| /*----------------------------------------------------------------------- | |
| * RMDS - RISC Microcode Development Support Control Register | |
| *----------------------------------------------------------------------- | |
| */ | |
| #define CFG_RMDS 0 | |
| /*----------------------------------------------------------------------- | |
| * | |
| *----------------------------------------------------------------------- | |
| * | |
| */ | |
| #define CFG_DER 0 | |
| /* | |
| * Init Memory Controller: | |
| * | |
| * BR0 and OR0 (FLASH) | |
| */ | |
| #define FLASH_BASE0_PRELIM 0xFE000000 /* FLASH bank #0 */ | |
| /* used to re-map FLASH | |
| * restrict access enough to keep SRAM working (if any) | |
| * but not too much to meddle with FLASH accesses | |
| */ | |
| /* allow for max 4 MB of Flash */ | |
| #define CFG_REMAP_OR_AM 0xFFC00000 /* OR addr mask */ | |
| #define CFG_PRELIM_OR_AM 0xFFC00000 /* OR addr mask */ | |
| /* FLASH timing: ACS = 11, TRLX = 1, CSNT = 1, SCY = 5, EHTR = 0 */ | |
| #define CFG_OR_TIMING_FLASH ( OR_CSNT_SAM | /*OR_ACS_DIV4 |*/ OR_BI | \ | |
| OR_SCY_5_CLK | OR_TRLX) | |
| #define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) | |
| #define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) | |
| /* 8 bit, bank valid */ | |
| #define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) | |
| /* | |
| * BR1/OR1 - SDRAM | |
| * | |
| * Multiplexed addresses, GPL5 output to GPL5_A (don't care) | |
| */ | |
| #define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM bank */ | |
| #define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */ | |
| #define SDRAM_TIMING 0x00000A00 /* SDRAM-Timing */ | |
| #define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB SDRAM */ | |
| #define CFG_OR1_PRELIM (SDRAM_PRELIM_OR_AM | SDRAM_TIMING ) | |
| #define CFG_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) | |
| /* | |
| * BR2/OR2 - HPRO2: PEB2256 @ 0xE0000000, 8 Bit wide | |
| */ | |
| #define HPRO2_BASE 0xE0000000 | |
| #define HPRO2_OR_AM 0xFFFF8000 | |
| #define HPRO2_TIMING 0x00000934 | |
| #define CFG_OR2 (HPRO2_OR_AM | HPRO2_TIMING) | |
| #define CFG_BR2 ((HPRO2_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) | |
| /* | |
| * BR3/OR3: not used | |
| * BR4/OR4: not used | |
| * BR5/OR5: not used | |
| * BR6/OR6: not used | |
| * BR7/OR7: not used | |
| */ | |
| /* | |
| * MAMR settings for SDRAM | |
| */ | |
| /* periodic timer for refresh */ | |
| #define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */ | |
| /* 8 column SDRAM */ | |
| #define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ | |
| MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ | |
| MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) | |
| /* 9 column SDRAM */ | |
| #define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ | |
| MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ | |
| MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) | |
| /* | |
| * Internal Definitions | |
| * | |
| * Boot Flags | |
| */ | |
| #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ | |
| #define BOOTFLAG_WARM 0x02 /* Software reboot */ | |
| #endif /* __CONFIG_H */ |