| /* | 
 |  * Copyright (C) 2007 Freescale Semiconductor, Inc. | 
 |  * | 
 |  * Author: Scott Wood <scottwood@freescale.com> | 
 |  *         Dave Liu <daveliu@freescale.com> | 
 |  * | 
 |  * See file CREDITS for list of people who contributed to this | 
 |  * project. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation; either version 2 of | 
 |  * the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
 |  * MA 02111-1307 USA | 
 |  */ | 
 |  | 
 | #include <common.h> | 
 | #include <i2c.h> | 
 | #if defined(CONFIG_OF_LIBFDT) | 
 | #include <libfdt.h> | 
 | #endif | 
 | #include <pci.h> | 
 | #include <mpc83xx.h> | 
 |  | 
 | DECLARE_GLOBAL_DATA_PTR; | 
 |  | 
 | int board_early_init_f(void) | 
 | { | 
 | 	volatile immap_t *im = (immap_t *)CFG_IMMR; | 
 |  | 
 | 	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) | 
 | 		gd->flags |= GD_FLG_SILENT; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static u8 read_board_info(void) | 
 | { | 
 | 	u8 val8; | 
 | 	i2c_set_bus_num(0); | 
 |  | 
 | 	if (i2c_read(CFG_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0) | 
 | 		return val8; | 
 | 	else | 
 | 		return 0; | 
 | } | 
 |  | 
 | int checkboard(void) | 
 | { | 
 | 	static const char * const rev_str[] = { | 
 | 		"0.0", | 
 | 		"0.1", | 
 | 		"1.0", | 
 | 		"1.1", | 
 | 		"<unknown>", | 
 | 	}; | 
 | 	u8 info; | 
 | 	int i; | 
 |  | 
 | 	info = read_board_info(); | 
 | 	i = (!info) ? 4: info & 0x03; | 
 |  | 
 | 	printf("Board: Freescale MPC8315ERDB Rev %s\n", rev_str[i]); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct pci_region pci_regions[] = { | 
 | 	{ | 
 | 		bus_start: CFG_PCI_MEM_BASE, | 
 | 		phys_start: CFG_PCI_MEM_PHYS, | 
 | 		size: CFG_PCI_MEM_SIZE, | 
 | 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH | 
 | 	}, | 
 | 	{ | 
 | 		bus_start: CFG_PCI_MMIO_BASE, | 
 | 		phys_start: CFG_PCI_MMIO_PHYS, | 
 | 		size: CFG_PCI_MMIO_SIZE, | 
 | 		flags: PCI_REGION_MEM | 
 | 	}, | 
 | 	{ | 
 | 		bus_start: CFG_PCI_IO_BASE, | 
 | 		phys_start: CFG_PCI_IO_PHYS, | 
 | 		size: CFG_PCI_IO_SIZE, | 
 | 		flags: PCI_REGION_IO | 
 | 	} | 
 | }; | 
 |  | 
 | void pci_init_board(void) | 
 | { | 
 | 	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; | 
 | 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; | 
 | 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw; | 
 | 	struct pci_region *reg[] = { pci_regions }; | 
 | 	int warmboot; | 
 |  | 
 | 	/* Enable all 3 PCI_CLK_OUTPUTs. */ | 
 | 	clk->occr |= 0xe0000000; | 
 |  | 
 | 	/* | 
 | 	 * Configure PCI Local Access Windows | 
 | 	 */ | 
 | 	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; | 
 | 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; | 
 |  | 
 | 	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; | 
 | 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; | 
 |  | 
 | 	warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM; | 
 | 	warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF; | 
 |  | 
 | 	mpc83xx_pci_init(1, reg, warmboot); | 
 | } | 
 |  | 
 | #if defined(CONFIG_OF_BOARD_SETUP) | 
 | void ft_board_setup(void *blob, bd_t *bd) | 
 | { | 
 | 	ft_cpu_setup(blob, bd); | 
 | #ifdef CONFIG_PCI | 
 | 	ft_pci_setup(blob, bd); | 
 | #endif | 
 | } | 
 | #endif |