| /* | |
| * (C) Copyright 2005 | |
| * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de> | |
| * | |
| * Based On | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #include <common.h> | |
| #include "cfm_flash.h" | |
| #define PHYS_FLASH_1 CFG_FLASH_BASE | |
| #define FLASH_BANK_SIZE 0x200000 | |
| flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; | |
| void flash_print_info (flash_info_t * info) | |
| { | |
| int i; | |
| switch (info->flash_id & FLASH_VENDMASK) { | |
| case (AMD_MANUFACT & FLASH_VENDMASK): | |
| printf ("AMD: "); | |
| switch (info->flash_id & FLASH_TYPEMASK) { | |
| case (AMD_ID_LV160B & FLASH_TYPEMASK): | |
| printf ("AM29LV160B (16Bit)\n"); | |
| break; | |
| default: | |
| printf ("Unknown Chip Type\n"); | |
| break; | |
| } | |
| break; | |
| case FREESCALE_MANUFACT & FLASH_VENDMASK: | |
| cfm_flash_print_info (info); | |
| break; | |
| default: | |
| printf ("Unknown Vendor "); | |
| break; | |
| } | |
| puts (" Size: "); | |
| if ((info->size >> 20) > 0) | |
| { | |
| printf ("%ld MiB",info->size >> 20); | |
| } | |
| else | |
| { | |
| printf ("%ld KiB",info->size >> 10); | |
| } | |
| printf (" in %d Sectors\n", info->sector_count); | |
| printf (" Sector Start Addresses:"); | |
| for (i = 0; i < info->sector_count; i++) { | |
| if ((i % 4) == 0) { | |
| printf ("\n "); | |
| } | |
| printf ("%02d: %08lX%s ", i,info->start[i], | |
| info->protect[i] ? " P" : " "); | |
| } | |
| printf ("\n\n"); | |
| } | |
| unsigned long flash_init (void) | |
| { | |
| int i, j; | |
| ulong size = 0; | |
| for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { | |
| ulong flashbase = 0; | |
| switch (i) | |
| { | |
| case 1: | |
| flash_info[i].flash_id = | |
| (AMD_MANUFACT & FLASH_VENDMASK) | | |
| (AMD_ID_LV160B & FLASH_TYPEMASK); | |
| flash_info[i].size = FLASH_BANK_SIZE; | |
| flash_info[i].sector_count = CFG_MAX_FLASH_SECT; | |
| memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); | |
| flashbase = PHYS_FLASH_1; | |
| for (j = 0; j < flash_info[i].sector_count; j++) { | |
| if (j == 0) { | |
| /* 1st is 16 KiB */ | |
| flash_info[i].start[j] = flashbase; | |
| } | |
| if ((j >= 1) && (j <= 2)) { | |
| /* 2nd and 3rd are 8 KiB */ | |
| flash_info[i].start[j] = | |
| flashbase + 0x4000 + 0x2000 * (j - 1); | |
| } | |
| if (j == 3) { | |
| /* 4th is 32 KiB */ | |
| flash_info[i].start[j] = flashbase + 0x8000; | |
| } | |
| if ((j >= 4) && (j <= 34)) { | |
| /* rest is 256 KiB */ | |
| flash_info[i].start[j] = | |
| flashbase + 0x10000 + 0x10000 * (j - 4); | |
| } | |
| } | |
| break; | |
| case 0: | |
| cfm_flash_init (&flash_info[i]); | |
| break; | |
| default: | |
| panic ("configured to many flash banks!\n"); | |
| } | |
| size += flash_info[i].size; | |
| } | |
| flash_protect (FLAG_PROTECT_SET, | |
| CFG_FLASH_BASE, | |
| CFG_FLASH_BASE + 0xffff, &flash_info[0]); | |
| return size; | |
| } | |
| #define CMD_READ_ARRAY 0x00F0 | |
| #define CMD_UNLOCK1 0x00AA | |
| #define CMD_UNLOCK2 0x0055 | |
| #define CMD_ERASE_SETUP 0x0080 | |
| #define CMD_ERASE_CONFIRM 0x0030 | |
| #define CMD_PROGRAM 0x00A0 | |
| #define CMD_UNLOCK_BYPASS 0x0020 | |
| #define MEM_FLASH_ADDR1 (*(volatile u16 *)(info->start[0] + (0x00000555<<1))) | |
| #define MEM_FLASH_ADDR2 (*(volatile u16 *)(info->start[0] + (0x000002AA<<1))) | |
| #define BIT_ERASE_DONE 0x0080 | |
| #define BIT_RDY_MASK 0x0080 | |
| #define BIT_PROGRAM_ERROR 0x0020 | |
| #define BIT_TIMEOUT 0x80000000 /* our flag */ | |
| #define ERR_READY -1 | |
| int amd_flash_erase_sector(flash_info_t * info, int sector) | |
| { | |
| int state; | |
| ulong result; | |
| volatile u16 *addr = | |
| (volatile u16 *) (info->start[sector]); | |
| MEM_FLASH_ADDR1 = CMD_UNLOCK1; | |
| MEM_FLASH_ADDR2 = CMD_UNLOCK2; | |
| MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; | |
| MEM_FLASH_ADDR1 = CMD_UNLOCK1; | |
| MEM_FLASH_ADDR2 = CMD_UNLOCK2; | |
| *addr = CMD_ERASE_CONFIRM; | |
| /* wait until flash is ready */ | |
| state = 0; | |
| set_timer (0); | |
| do { | |
| result = *addr; | |
| /* check timeout */ | |
| if (get_timer (0) > CFG_FLASH_ERASE_TOUT) { | |
| MEM_FLASH_ADDR1 = CMD_READ_ARRAY; | |
| state = ERR_TIMOUT; | |
| } | |
| if (!state && (result & 0xFFFF) & BIT_ERASE_DONE) | |
| state = ERR_READY; | |
| } | |
| while (!state); | |
| if (state == ERR_READY) | |
| state = ERR_OK; | |
| MEM_FLASH_ADDR1 = CMD_READ_ARRAY; | |
| return state; | |
| } | |
| int flash_erase (flash_info_t * info, int s_first, int s_last) | |
| { | |
| int iflag, cflag; | |
| int sector; | |
| int rc; | |
| rc = ERR_OK; | |
| if (info->flash_id == FLASH_UNKNOWN) | |
| { | |
| rc = ERR_UNKNOWN_FLASH_TYPE; | |
| } /* (info->flash_id == FLASH_UNKNOWN) */ | |
| if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count) | |
| { | |
| rc = ERR_INVAL; | |
| } | |
| cflag = icache_status (); | |
| icache_disable (); | |
| iflag = disable_interrupts (); | |
| for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) { | |
| if (info->protect[sector]) | |
| { | |
| putc('P'); /* protected sector will not erase */ | |
| } | |
| else | |
| { | |
| /* erase on unprotected sector */ | |
| puts("E\b"); | |
| switch (info->flash_id & FLASH_VENDMASK) | |
| { | |
| case (AMD_MANUFACT & FLASH_VENDMASK): | |
| rc = amd_flash_erase_sector(info,sector); | |
| break; | |
| case (FREESCALE_MANUFACT & FLASH_VENDMASK): | |
| rc = cfm_flash_erase_sector(info,sector); | |
| break; | |
| default: | |
| return ERR_UNKNOWN_FLASH_VENDOR; | |
| } | |
| putc('.'); | |
| } | |
| } | |
| if (rc!=ERR_OK) | |
| { | |
| printf ("\n "); | |
| flash_perror (rc); | |
| } | |
| else | |
| { | |
| printf (" done\n"); | |
| } | |
| udelay (10000); /* allow flash to settle - wait 10 ms */ | |
| if (iflag) | |
| enable_interrupts (); | |
| if (cflag) | |
| icache_enable (); | |
| return rc; | |
| } | |
| volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data) | |
| { | |
| volatile u16 *addr; | |
| ulong result; | |
| int cflag, iflag; | |
| int state; | |
| /* | |
| * Check if Flash is (sufficiently) erased | |
| */ | |
| addr = (volatile u16 *) dest; | |
| result = *addr; | |
| if ((result & data) != data) | |
| return ERR_NOT_ERASED; | |
| /* | |
| * Disable interrupts which might cause a timeout | |
| * here. Remember that our exception vectors are | |
| * at address 0 in the flash, and we don't want a | |
| * (ticker) exception to happen while the flash | |
| * chip is in programming mode. | |
| */ | |
| cflag = icache_status (); | |
| icache_disable (); | |
| iflag = disable_interrupts (); | |
| MEM_FLASH_ADDR1 = CMD_UNLOCK1; | |
| MEM_FLASH_ADDR2 = CMD_UNLOCK2; | |
| MEM_FLASH_ADDR1 = CMD_PROGRAM; | |
| *addr = data; | |
| /* arm simple, non interrupt dependent timer */ | |
| set_timer (0); | |
| /* wait until flash is ready */ | |
| state = 0; | |
| do { | |
| result = *addr; | |
| /* check timeout */ | |
| if (get_timer (0) > CFG_FLASH_ERASE_TOUT) { | |
| state = ERR_TIMOUT; | |
| } | |
| if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK))) | |
| state = ERR_READY; | |
| } while (!state); | |
| *addr = CMD_READ_ARRAY; | |
| if (state == ERR_READY) | |
| state = ERR_OK; | |
| if ((*addr != data) && (state != ERR_TIMOUT)) | |
| state = ERR_PROG_ERROR; | |
| if (iflag) | |
| enable_interrupts (); | |
| if (cflag) | |
| icache_enable (); | |
| return state; | |
| } | |
| int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) | |
| { | |
| int rc; | |
| ulong dest; | |
| u16 data; | |
| rc = ERR_OK; | |
| if (addr & 1) | |
| { | |
| debug ("Byte alignment not supported\n"); | |
| rc = ERR_ALIGN; | |
| } | |
| if (cnt & 1) | |
| { | |
| debug ("Byte transfer not supported\n"); | |
| rc = ERR_ALIGN; | |
| } | |
| dest = addr; | |
| while ((cnt>=2) && (rc == ERR_OK)) | |
| { | |
| data = *((volatile u16 *) src); | |
| rc=amd_write_word (info,dest,data); | |
| src +=2; | |
| dest +=2; | |
| cnt -=2; | |
| } | |
| return rc; | |
| } | |
| int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) | |
| { | |
| int rc; | |
| switch (info->flash_id & FLASH_VENDMASK) | |
| { | |
| case (AMD_MANUFACT & FLASH_VENDMASK): | |
| rc = amd_flash_write_buff(info,src,addr,cnt); | |
| break; | |
| case (FREESCALE_MANUFACT & FLASH_VENDMASK): | |
| rc = cfm_flash_write_buff(info,src,addr,cnt); | |
| break; | |
| default: | |
| rc = ERR_UNKNOWN_FLASH_VENDOR; | |
| } | |
| return rc; | |
| } | |
| int amd_flash_protect(flash_info_t * info,long sector,int prot) | |
| { | |
| int rc; | |
| rc= ERR_OK; | |
| if (prot) | |
| { | |
| info->protect[sector]=1; | |
| } | |
| else | |
| { | |
| info->protect[sector]=0; | |
| } | |
| return rc; | |
| } | |
| #ifdef CFG_FLASH_PROTECTION | |
| int flash_real_protect(flash_info_t * info,long sector,int prot) | |
| { | |
| int rc; | |
| switch (info->flash_id & FLASH_VENDMASK) | |
| { | |
| case (AMD_MANUFACT & FLASH_VENDMASK): | |
| rc = amd_flash_protect(info,sector,prot); | |
| break; | |
| case (FREESCALE_MANUFACT & FLASH_VENDMASK): | |
| rc = cfm_flash_protect(info,sector,prot); | |
| break; | |
| default: | |
| rc = ERR_UNKNOWN_FLASH_VENDOR; | |
| } | |
| return rc; | |
| } | |
| #endif |