| /* | |
| * (C) Copyright 2000 | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| /* | |
| * Yoo. Jonghoon, IPone, yooth@ipone.co.kr | |
| * U-Boot port on RPXlite board | |
| * | |
| * Some of flash control words are modified. (from 2x16bit device | |
| * to 4x8bit device) | |
| * RPXLite board I tested has only 4 AM29LV800BB devices. Other devices | |
| * are not tested. | |
| * | |
| * (?) Does an RPXLite board which | |
| * does not use AM29LV800 flash memory exist ? | |
| * I don't know... | |
| */ | |
| #include <common.h> | |
| #include <mpc8xx.h> | |
| flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ | |
| /*----------------------------------------------------------------------- | |
| * Functions | |
| */ | |
| static ulong flash_get_size (vu_long *addr, flash_info_t *info); | |
| static int write_word (flash_info_t *info, ulong dest, ulong data); | |
| static void flash_get_offsets (ulong base, flash_info_t *info); | |
| /*----------------------------------------------------------------------- | |
| */ | |
| unsigned long flash_init (void) | |
| { | |
| /* volatile immap_t *immap = (immap_t *)CFG_IMMR; */ | |
| /* volatile memctl8xx_t *memctl = &immap->im_memctl; */ | |
| unsigned long size_b0 ; | |
| int i; | |
| /* Init: no FLASHes known */ | |
| for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) { | |
| flash_info[i].flash_id = FLASH_UNKNOWN; | |
| } | |
| /* Static FLASH Bank configuration here - FIXME XXX */ | |
| /* | |
| size_b0 = flash_get_size((vu_long *)FLASH_BASE_DEBUG, &flash_info[0]); | |
| if (flash_info[0].flash_id == FLASH_UNKNOWN) { | |
| printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", | |
| size_b0, size_b0<<20); | |
| } | |
| */ | |
| /* Remap FLASH according to real size */ | |
| /*%%% | |
| memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000); | |
| memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; | |
| %%%*/ | |
| /* Re-do sizing to get full correct info */ | |
| size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]); | |
| flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]); | |
| #if CFG_MONITOR_BASE >= CFG_FLASH_BASE | |
| /* monitor protection ON by default */ | |
| flash_protect(FLAG_PROTECT_SET, | |
| CFG_MONITOR_BASE, | |
| CFG_MONITOR_BASE+monitor_flash_len-1, | |
| &flash_info[0]); | |
| #endif | |
| flash_info[0].size = size_b0; | |
| return (size_b0); | |
| } | |
| /*----------------------------------------------------------------------- | |
| */ | |
| static void flash_get_offsets (ulong base, flash_info_t *info) | |
| { | |
| int i; | |
| /* set up sector start address table */ | |
| if (info->flash_id & FLASH_BTYPE) { | |
| /* set sector offsets for bottom boot block type */ | |
| info->start[0] = base + 0x00000000; | |
| info->start[1] = base + 0x00010000; | |
| info->start[2] = base + 0x00018000; | |
| info->start[3] = base + 0x00020000; | |
| for (i = 4; i < info->sector_count; i++) { | |
| info->start[i] = base + ((i-3) * 0x00040000) ; | |
| } | |
| } else { | |
| /* set sector offsets for top boot block type */ | |
| i = info->sector_count - 1; | |
| info->start[i--] = base + info->size - 0x00010000; | |
| info->start[i--] = base + info->size - 0x00018000; | |
| info->start[i--] = base + info->size - 0x00020000; | |
| for (; i >= 0; i--) { | |
| info->start[i] = base + i * 0x00040000; | |
| } | |
| } | |
| } | |
| /*----------------------------------------------------------------------- | |
| */ | |
| void flash_print_info (flash_info_t *info) | |
| { | |
| int i; | |
| if (info->flash_id == FLASH_UNKNOWN) { | |
| printf ("missing or unknown FLASH type\n"); | |
| return; | |
| } | |
| switch (info->flash_id & FLASH_VENDMASK) { | |
| case FLASH_MAN_AMD: printf ("AMD "); break; | |
| case FLASH_MAN_FUJ: printf ("FUJITSU "); break; | |
| default: printf ("Unknown Vendor "); break; | |
| } | |
| switch (info->flash_id & FLASH_TYPEMASK) { | |
| case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); | |
| break; | |
| case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); | |
| break; | |
| case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); | |
| break; | |
| case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); | |
| break; | |
| case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); | |
| break; | |
| case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); | |
| break; | |
| case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); | |
| break; | |
| case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); | |
| break; | |
| default: printf ("Unknown Chip Type\n"); | |
| break; | |
| } | |
| printf (" Size: %ld MB in %d Sectors\n", | |
| info->size >> 20, info->sector_count); | |
| printf (" Sector Start Addresses:"); | |
| for (i=0; i<info->sector_count; ++i) { | |
| if ((i % 5) == 0) | |
| printf ("\n "); | |
| printf (" %08lX%s", | |
| info->start[i], | |
| info->protect[i] ? " (RO)" : " " | |
| ); | |
| } | |
| printf ("\n"); | |
| return; | |
| } | |
| /*----------------------------------------------------------------------- | |
| */ | |
| /*----------------------------------------------------------------------- | |
| */ | |
| /* | |
| * The following code cannot be run from FLASH! | |
| */ | |
| static ulong flash_get_size (vu_long *addr, flash_info_t *info) | |
| { | |
| short i; | |
| ulong value; | |
| ulong base = (ulong)addr; | |
| /* Write auto select command: read Manufacturer ID */ | |
| addr[0xAAA] = 0x00AA00AA ; | |
| addr[0x555] = 0x00550055 ; | |
| addr[0xAAA] = 0x00900090 ; | |
| value = addr[0] ; | |
| switch (value & 0x00FF00FF) { | |
| case AMD_MANUFACT: | |
| info->flash_id = FLASH_MAN_AMD; | |
| break; | |
| case FUJ_MANUFACT: | |
| info->flash_id = FLASH_MAN_FUJ; | |
| break; | |
| default: | |
| info->flash_id = FLASH_UNKNOWN; | |
| info->sector_count = 0; | |
| info->size = 0; | |
| return (0); /* no or unknown flash */ | |
| } | |
| value = addr[2] ; /* device ID */ | |
| switch (value & 0x00FF00FF) { | |
| case (AMD_ID_LV400T & 0x00FF00FF): | |
| info->flash_id += FLASH_AM400T; | |
| info->sector_count = 11; | |
| info->size = 0x00100000; | |
| break; /* => 1 MB */ | |
| case (AMD_ID_LV400B & 0x00FF00FF): | |
| info->flash_id += FLASH_AM400B; | |
| info->sector_count = 11; | |
| info->size = 0x00100000; | |
| break; /* => 1 MB */ | |
| case (AMD_ID_LV800T & 0x00FF00FF): | |
| info->flash_id += FLASH_AM800T; | |
| info->sector_count = 19; | |
| info->size = 0x00200000; | |
| break; /* => 2 MB */ | |
| case (AMD_ID_LV800B & 0x00FF00FF): | |
| info->flash_id += FLASH_AM800B; | |
| info->sector_count = 19; | |
| info->size = 0x00400000; /*%%% Size doubled by yooth */ | |
| break; /* => 4 MB */ | |
| case (AMD_ID_LV160T & 0x00FF00FF): | |
| info->flash_id += FLASH_AM160T; | |
| info->sector_count = 35; | |
| info->size = 0x00400000; | |
| break; /* => 4 MB */ | |
| case (AMD_ID_LV160B & 0x00FF00FF): | |
| info->flash_id += FLASH_AM160B; | |
| info->sector_count = 35; | |
| info->size = 0x00400000; | |
| break; /* => 4 MB */ | |
| #if 0 /* enable when device IDs are available */ | |
| case AMD_ID_LV320T: | |
| info->flash_id += FLASH_AM320T; | |
| info->sector_count = 67; | |
| info->size = 0x00800000; | |
| break; /* => 8 MB */ | |
| case AMD_ID_LV320B: | |
| info->flash_id += FLASH_AM320B; | |
| info->sector_count = 67; | |
| info->size = 0x00800000; | |
| break; /* => 8 MB */ | |
| #endif | |
| default: | |
| info->flash_id = FLASH_UNKNOWN; | |
| return (0); /* => no or unknown flash */ | |
| } | |
| /*%%% sector start address modified */ | |
| /* set up sector start address table */ | |
| if (info->flash_id & FLASH_BTYPE) { | |
| /* set sector offsets for bottom boot block type */ | |
| info->start[0] = base + 0x00000000; | |
| info->start[1] = base + 0x00010000; | |
| info->start[2] = base + 0x00018000; | |
| info->start[3] = base + 0x00020000; | |
| for (i = 4; i < info->sector_count; i++) { | |
| info->start[i] = base + ((i-3) * 0x00040000) ; | |
| } | |
| } else { | |
| /* set sector offsets for top boot block type */ | |
| i = info->sector_count - 1; | |
| info->start[i--] = base + info->size - 0x00010000; | |
| info->start[i--] = base + info->size - 0x00018000; | |
| info->start[i--] = base + info->size - 0x00020000; | |
| for (; i >= 0; i--) { | |
| info->start[i] = base + i * 0x00040000; | |
| } | |
| } | |
| /* check for protected sectors */ | |
| for (i = 0; i < info->sector_count; i++) { | |
| /* read sector protection at sector address, (A7 .. A0) = 0x02 */ | |
| /* D0 = 1 if protected */ | |
| addr = (volatile unsigned long *)(info->start[i]); | |
| info->protect[i] = addr[4] & 1 ; | |
| } | |
| /* | |
| * Prevent writes to uninitialized FLASH. | |
| */ | |
| if (info->flash_id != FLASH_UNKNOWN) { | |
| addr = (volatile unsigned long *)info->start[0]; | |
| *addr = 0xF0F0F0F0; /* reset bank */ | |
| } | |
| return (info->size); | |
| } | |
| /*----------------------------------------------------------------------- | |
| */ | |
| int flash_erase (flash_info_t *info, int s_first, int s_last) | |
| { | |
| vu_long *addr = (vu_long*)(info->start[0]); | |
| int flag, prot, sect, l_sect; | |
| ulong start, now, last; | |
| if ((s_first < 0) || (s_first > s_last)) { | |
| if (info->flash_id == FLASH_UNKNOWN) { | |
| printf ("- missing\n"); | |
| } else { | |
| printf ("- no sectors to erase\n"); | |
| } | |
| return 1; | |
| } | |
| if ((info->flash_id == FLASH_UNKNOWN) || | |
| (info->flash_id > FLASH_AMD_COMP)) { | |
| printf ("Can't erase unknown flash type %08lx - aborted\n", | |
| info->flash_id); | |
| return 1; | |
| } | |
| prot = 0; | |
| for (sect=s_first; sect<=s_last; ++sect) { | |
| if (info->protect[sect]) { | |
| prot++; | |
| } | |
| } | |
| if (prot) { | |
| printf ("- Warning: %d protected sectors will not be erased!\n", | |
| prot); | |
| } else { | |
| printf ("\n"); | |
| } | |
| l_sect = -1; | |
| /* Disable interrupts which might cause a timeout here */ | |
| flag = disable_interrupts(); | |
| addr[0xAAA] = 0xAAAAAAAA; | |
| addr[0x555] = 0x55555555; | |
| addr[0xAAA] = 0x80808080; | |
| addr[0xAAA] = 0xAAAAAAAA; | |
| addr[0x555] = 0x55555555; | |
| /* Start erase on unprotected sectors */ | |
| for (sect = s_first; sect<=s_last; sect++) { | |
| if (info->protect[sect] == 0) { /* not protected */ | |
| addr = (vu_long *)(info->start[sect]) ; | |
| addr[0] = 0x30303030 ; | |
| l_sect = sect; | |
| } | |
| } | |
| /* re-enable interrupts if necessary */ | |
| if (flag) | |
| enable_interrupts(); | |
| /* wait at least 80us - let's wait 1 ms */ | |
| udelay (1000); | |
| /* | |
| * We wait for the last triggered sector | |
| */ | |
| if (l_sect < 0) | |
| goto DONE; | |
| start = get_timer (0); | |
| last = start; | |
| addr = (vu_long *)(info->start[l_sect]); | |
| while ((addr[0] & 0x80808080) != 0x80808080) { | |
| if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { | |
| printf ("Timeout\n"); | |
| return 1; | |
| } | |
| /* show that we're waiting */ | |
| if ((now - last) > 1000) { /* every second */ | |
| putc ('.'); | |
| last = now; | |
| } | |
| } | |
| DONE: | |
| /* reset to read mode */ | |
| addr = (vu_long *)info->start[0]; | |
| addr[0] = 0xF0F0F0F0; /* reset bank */ | |
| printf (" done\n"); | |
| return 0; | |
| } | |
| /*----------------------------------------------------------------------- | |
| * Copy memory to flash, returns: | |
| * 0 - OK | |
| * 1 - write timeout | |
| * 2 - Flash not erased | |
| */ | |
| int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) | |
| { | |
| ulong cp, wp, data; | |
| int i, l, rc; | |
| wp = (addr & ~3); /* get lower word aligned address */ | |
| /* | |
| * handle unaligned start bytes | |
| */ | |
| if ((l = addr - wp) != 0) { | |
| data = 0; | |
| for (i=0, cp=wp; i<l; ++i, ++cp) { | |
| data = (data << 8) | (*(uchar *)cp); | |
| } | |
| for (; i<4 && cnt>0; ++i) { | |
| data = (data << 8) | *src++; | |
| --cnt; | |
| ++cp; | |
| } | |
| for (; cnt==0 && i<4; ++i, ++cp) { | |
| data = (data << 8) | (*(uchar *)cp); | |
| } | |
| if ((rc = write_word(info, wp, data)) != 0) { | |
| return (rc); | |
| } | |
| wp += 4; | |
| } | |
| /* | |
| * handle word aligned part | |
| */ | |
| while (cnt >= 4) { | |
| data = 0; | |
| for (i=0; i<4; ++i) { | |
| data = (data << 8) | *src++; | |
| } | |
| if ((rc = write_word(info, wp, data)) != 0) { | |
| return (rc); | |
| } | |
| wp += 4; | |
| cnt -= 4; | |
| } | |
| if (cnt == 0) { | |
| return (0); | |
| } | |
| /* | |
| * handle unaligned tail bytes | |
| */ | |
| data = 0; | |
| for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { | |
| data = (data << 8) | *src++; | |
| --cnt; | |
| } | |
| for (; i<4; ++i, ++cp) { | |
| data = (data << 8) | (*(uchar *)cp); | |
| } | |
| return (write_word(info, wp, data)); | |
| } | |
| /*----------------------------------------------------------------------- | |
| * Write a word to Flash, returns: | |
| * 0 - OK | |
| * 1 - write timeout | |
| * 2 - Flash not erased | |
| */ | |
| static int write_word (flash_info_t *info, ulong dest, ulong data) | |
| { | |
| vu_long *addr = (vu_long *)(info->start[0]); | |
| ulong start; | |
| int flag; | |
| /* Check if Flash is (sufficiently) erased */ | |
| if ((*((vu_long *)dest) & data) != data) { | |
| return (2); | |
| } | |
| /* Disable interrupts which might cause a timeout here */ | |
| flag = disable_interrupts(); | |
| addr[0xAAA] = 0xAAAAAAAA; | |
| addr[0x555] = 0x55555555; | |
| addr[0xAAA] = 0xA0A0A0A0; | |
| *((vu_long *)dest) = data; | |
| /* re-enable interrupts if necessary */ | |
| if (flag) | |
| enable_interrupts(); | |
| /* data polling for D7 */ | |
| start = get_timer (0); | |
| while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) { | |
| if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { | |
| return (1); | |
| } | |
| } | |
| return (0); | |
| } | |
| /*----------------------------------------------------------------------- | |
| */ |