| /* | |
| *(C) Copyright 2005-2008 Netstal Maschinen AG | |
| * Niklaus Giger (Niklaus.Giger@netstal.com) | |
| * | |
| * This source code is free software; you can redistribute it | |
| * and/or modify it in source code form under the terms of the GNU | |
| * General Public License as published by the Free Software | |
| * Foundation; either version 2 of the License, or (at your option) | |
| * any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA | |
| */ | |
| #include <common.h> | |
| #include <ppc4xx.h> | |
| #include <asm/processor.h> | |
| #include "nm.h" | |
| #if defined(DEBUG) | |
| void show_sdram_registers(void) | |
| { | |
| u32 value; | |
| printf("SDRAM Controller Registers --\n"); | |
| mfsdram(mem_mcopt1, value); | |
| printf(" SDRAM0_CFG : 0x%08x\n", value); | |
| mfsdram(mem_status, value); | |
| printf(" SDRAM0_STATUS: 0x%08x\n", value); | |
| mfsdram(mem_mb0cf, value); | |
| printf(" SDRAM0_B0CR : 0x%08x\n", value); | |
| mfsdram(mem_mb1cf, value); | |
| printf(" SDRAM0_B1CR : 0x%08x\n", value); | |
| mfsdram(mem_sdtr1, value); | |
| printf(" SDRAM0_TR : 0x%08x\n", value); | |
| mfsdram(mem_rtr, value); | |
| printf(" SDRAM0_RTR : 0x%08x\n", value); | |
| } | |
| #endif | |
| long int init_ppc405_sdram(unsigned int dram_size) | |
| { | |
| #ifdef DEBUG | |
| printf(__FUNCTION__); | |
| #endif | |
| /* disable memory controller */ | |
| mtsdram(mem_mcopt1, 0x00000000); | |
| udelay (500); | |
| /* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */ | |
| mtsdram(mem_besra, 0xffffffff); | |
| /* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */ | |
| mtsdram(mem_besrb, 0xffffffff); | |
| /* Clear SDRAM0_ECCCFG (disable ECC) */ | |
| mtsdram(mem_ecccf, 0x00000000); | |
| /* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */ | |
| mtsdram(mem_eccerr, 0xffffffff); | |
| /* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2 | |
| */ | |
| mtsdram(mem_sdtr1, 0x008a4015); | |
| /* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1 | |
| * and refresh timer | |
| */ | |
| switch (dram_size >> 20) { | |
| case 32: | |
| mtsdram(mem_mb0cf, 0x00062001); | |
| mtsdram(mem_rtr, 0x07F00000); | |
| break; | |
| case 64: | |
| mtsdram(mem_mb0cf, 0x00084001); | |
| mtsdram(mem_rtr, 0x04100000); | |
| break; | |
| case 128: | |
| mtsdram(mem_mb0cf, 0x000A4001); | |
| mtsdram(mem_rtr, 0x04100000); | |
| break; | |
| default: | |
| printf("Invalid memory size of %d MB given\n", dram_size >> 20); | |
| } | |
| /* Power management idle timer set to the default. */ | |
| mtsdram(mem_pmit, 0x07c00000); | |
| udelay (500); | |
| /* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) TODO */ | |
| mtsdram(mem_mcopt1, 0x90800000); | |
| #ifdef DEBUG | |
| printf("%s: done\n", __FUNCTION__); | |
| #endif | |
| return dram_size; | |
| } |