|  | /* | 
|  | *	Copyright 1994, 1995, 2000 Neil Russell. | 
|  | *	(See License) | 
|  | *	Copyright 2000, 2001 DENX Software Engineering, Wolfgang Denk, wd@denx.de | 
|  | */ | 
|  |  | 
|  | #include <common.h> | 
|  | #include <command.h> | 
|  | #include <net.h> | 
|  | #include "tftp.h" | 
|  | #include "bootp.h" | 
|  |  | 
|  | #if defined(CONFIG_CMD_NET) | 
|  |  | 
|  | #define WELL_KNOWN_PORT	69		/* Well known TFTP port #		*/ | 
|  | #define TIMEOUT		5000UL		/* Millisecs to timeout for lost pkt */ | 
|  | #ifndef	CONFIG_NET_RETRY_COUNT | 
|  | # define TIMEOUT_COUNT	10		/* # of timeouts before giving up  */ | 
|  | #else | 
|  | # define TIMEOUT_COUNT  (CONFIG_NET_RETRY_COUNT * 2) | 
|  | #endif | 
|  | /* (for checking the image size)	*/ | 
|  | #define HASHES_PER_LINE	65		/* Number of "loading" hashes per line	*/ | 
|  |  | 
|  | /* | 
|  | *	TFTP operations. | 
|  | */ | 
|  | #define TFTP_RRQ	1 | 
|  | #define TFTP_WRQ	2 | 
|  | #define TFTP_DATA	3 | 
|  | #define TFTP_ACK	4 | 
|  | #define TFTP_ERROR	5 | 
|  | #define TFTP_OACK	6 | 
|  |  | 
|  | static ulong TftpTimeoutMSecs = TIMEOUT; | 
|  | static int TftpTimeoutCountMax = TIMEOUT_COUNT; | 
|  |  | 
|  | /* | 
|  | * These globals govern the timeout behavior when attempting a connection to a | 
|  | * TFTP server. TftpRRQTimeoutMSecs specifies the number of milliseconds to | 
|  | * wait for the server to respond to initial connection. Second global, | 
|  | * TftpRRQTimeoutCountMax, gives the number of such connection retries. | 
|  | * TftpRRQTimeoutCountMax must be non-negative and TftpRRQTimeoutMSecs must be | 
|  | * positive. The globals are meant to be set (and restored) by code needing | 
|  | * non-standard timeout behavior when initiating a TFTP transfer. | 
|  | */ | 
|  | ulong TftpRRQTimeoutMSecs = TIMEOUT; | 
|  | int TftpRRQTimeoutCountMax = TIMEOUT_COUNT; | 
|  |  | 
|  | static IPaddr_t TftpServerIP; | 
|  | static int	TftpServerPort;		/* The UDP port at their end		*/ | 
|  | static int	TftpOurPort;		/* The UDP port at our end		*/ | 
|  | static int	TftpTimeoutCount; | 
|  | static ulong	TftpBlock;		/* packet sequence number		*/ | 
|  | static ulong	TftpLastBlock;		/* last packet sequence number received */ | 
|  | static ulong	TftpBlockWrap;		/* count of sequence number wraparounds */ | 
|  | static ulong	TftpBlockWrapOffset;	/* memory offset due to wrapping	*/ | 
|  | static int	TftpState; | 
|  | #ifdef CONFIG_TFTP_TSIZE | 
|  | static int	TftpTsize;		/* The file size reported by the server */ | 
|  | static short	TftpNumchars;		/* The number of hashes we printed      */ | 
|  | #endif | 
|  |  | 
|  | #define STATE_RRQ	1 | 
|  | #define STATE_DATA	2 | 
|  | #define STATE_TOO_LARGE	3 | 
|  | #define STATE_BAD_MAGIC	4 | 
|  | #define STATE_OACK	5 | 
|  |  | 
|  | #define TFTP_BLOCK_SIZE		512		    /* default TFTP block size	*/ | 
|  | #define TFTP_SEQUENCE_SIZE	((ulong)(1<<16))    /* sequence number is 16 bit */ | 
|  |  | 
|  | #define DEFAULT_NAME_LEN	(8 + 4 + 1) | 
|  | static char default_filename[DEFAULT_NAME_LEN]; | 
|  |  | 
|  | #ifndef CONFIG_TFTP_FILE_NAME_MAX_LEN | 
|  | #define MAX_LEN 128 | 
|  | #else | 
|  | #define MAX_LEN CONFIG_TFTP_FILE_NAME_MAX_LEN | 
|  | #endif | 
|  |  | 
|  | static char tftp_filename[MAX_LEN]; | 
|  |  | 
|  | #ifdef CONFIG_SYS_DIRECT_FLASH_TFTP | 
|  | extern flash_info_t flash_info[]; | 
|  | #endif | 
|  |  | 
|  | /* 512 is poor choice for ethernet, MTU is typically 1500. | 
|  | * Minus eth.hdrs thats 1468.  Can get 2x better throughput with | 
|  | * almost-MTU block sizes.  At least try... fall back to 512 if need be. | 
|  | * (but those using CONFIG_IP_DEFRAG may want to set a larger block in cfg file) | 
|  | */ | 
|  | #ifdef CONFIG_TFTP_BLOCKSIZE | 
|  | #define TFTP_MTU_BLOCKSIZE CONFIG_TFTP_BLOCKSIZE | 
|  | #else | 
|  | #define TFTP_MTU_BLOCKSIZE 1468 | 
|  | #endif | 
|  |  | 
|  | static unsigned short TftpBlkSize=TFTP_BLOCK_SIZE; | 
|  | static unsigned short TftpBlkSizeOption=TFTP_MTU_BLOCKSIZE; | 
|  |  | 
|  | #ifdef CONFIG_MCAST_TFTP | 
|  | #include <malloc.h> | 
|  | #define MTFTP_BITMAPSIZE	0x1000 | 
|  | static unsigned *Bitmap; | 
|  | static int PrevBitmapHole,Mapsize=MTFTP_BITMAPSIZE; | 
|  | static uchar ProhibitMcast=0, MasterClient=0; | 
|  | static uchar Multicast=0; | 
|  | extern IPaddr_t Mcast_addr; | 
|  | static int Mcast_port; | 
|  | static ulong TftpEndingBlock; /* can get 'last' block before done..*/ | 
|  |  | 
|  | static void parse_multicast_oack(char *pkt,int len); | 
|  |  | 
|  | static void | 
|  | mcast_cleanup(void) | 
|  | { | 
|  | if (Mcast_addr) eth_mcast_join(Mcast_addr, 0); | 
|  | if (Bitmap) free(Bitmap); | 
|  | Bitmap=NULL; | 
|  | Mcast_addr = Multicast = Mcast_port = 0; | 
|  | TftpEndingBlock = -1; | 
|  | } | 
|  |  | 
|  | #endif	/* CONFIG_MCAST_TFTP */ | 
|  |  | 
|  | static __inline__ void | 
|  | store_block (unsigned block, uchar * src, unsigned len) | 
|  | { | 
|  | ulong offset = block * TftpBlkSize + TftpBlockWrapOffset; | 
|  | ulong newsize = offset + len; | 
|  | #ifdef CONFIG_SYS_DIRECT_FLASH_TFTP | 
|  | int i, rc = 0; | 
|  |  | 
|  | for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; i++) { | 
|  | /* start address in flash? */ | 
|  | if (flash_info[i].flash_id == FLASH_UNKNOWN) | 
|  | continue; | 
|  | if (load_addr + offset >= flash_info[i].start[0]) { | 
|  | rc = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (rc) { /* Flash is destination for this packet */ | 
|  | rc = flash_write ((char *)src, (ulong)(load_addr+offset), len); | 
|  | if (rc) { | 
|  | flash_perror (rc); | 
|  | NetState = NETLOOP_FAIL; | 
|  | return; | 
|  | } | 
|  | } | 
|  | else | 
|  | #endif /* CONFIG_SYS_DIRECT_FLASH_TFTP */ | 
|  | { | 
|  | (void)memcpy((void *)(load_addr + offset), src, len); | 
|  | } | 
|  | #ifdef CONFIG_MCAST_TFTP | 
|  | if (Multicast) | 
|  | ext2_set_bit(block, Bitmap); | 
|  | #endif | 
|  |  | 
|  | if (NetBootFileXferSize < newsize) | 
|  | NetBootFileXferSize = newsize; | 
|  | } | 
|  |  | 
|  | static void TftpSend (void); | 
|  | static void TftpTimeout (void); | 
|  |  | 
|  | /**********************************************************************/ | 
|  |  | 
|  | static void | 
|  | TftpSend (void) | 
|  | { | 
|  | volatile uchar *	pkt; | 
|  | volatile uchar *	xp; | 
|  | int			len = 0; | 
|  | volatile ushort *s; | 
|  |  | 
|  | #ifdef CONFIG_MCAST_TFTP | 
|  | /* Multicast TFTP.. non-MasterClients do not ACK data. */ | 
|  | if (Multicast | 
|  | && (TftpState == STATE_DATA) | 
|  | && (MasterClient == 0)) | 
|  | return; | 
|  | #endif | 
|  | /* | 
|  | *	We will always be sending some sort of packet, so | 
|  | *	cobble together the packet headers now. | 
|  | */ | 
|  | pkt = NetTxPacket + NetEthHdrSize() + IP_HDR_SIZE; | 
|  |  | 
|  | switch (TftpState) { | 
|  |  | 
|  | case STATE_RRQ: | 
|  | xp = pkt; | 
|  | s = (ushort *)pkt; | 
|  | *s++ = htons(TFTP_RRQ); | 
|  | pkt = (uchar *)s; | 
|  | strcpy ((char *)pkt, tftp_filename); | 
|  | pkt += strlen(tftp_filename) + 1; | 
|  | strcpy ((char *)pkt, "octet"); | 
|  | pkt += 5 /*strlen("octet")*/ + 1; | 
|  | strcpy ((char *)pkt, "timeout"); | 
|  | pkt += 7 /*strlen("timeout")*/ + 1; | 
|  | sprintf((char *)pkt, "%lu", TIMEOUT / 1000); | 
|  | debug("send option \"timeout %s\"\n", (char *)pkt); | 
|  | pkt += strlen((char *)pkt) + 1; | 
|  | #ifdef CONFIG_TFTP_TSIZE | 
|  | memcpy((char *)pkt, "tsize\0000\0", 8); | 
|  | pkt += 8; | 
|  | #endif | 
|  | /* try for more effic. blk size */ | 
|  | pkt += sprintf((char *)pkt,"blksize%c%d%c", | 
|  | 0,TftpBlkSizeOption,0); | 
|  | #ifdef CONFIG_MCAST_TFTP | 
|  | /* Check all preconditions before even trying the option */ | 
|  | if (!ProhibitMcast | 
|  | && (Bitmap=malloc(Mapsize)) | 
|  | && eth_get_dev()->mcast) { | 
|  | free(Bitmap); | 
|  | Bitmap=NULL; | 
|  | pkt += sprintf((char *)pkt,"multicast%c%c",0,0); | 
|  | } | 
|  | #endif /* CONFIG_MCAST_TFTP */ | 
|  | len = pkt - xp; | 
|  | break; | 
|  |  | 
|  | case STATE_OACK: | 
|  | #ifdef CONFIG_MCAST_TFTP | 
|  | /* My turn!  Start at where I need blocks I missed.*/ | 
|  | if (Multicast) | 
|  | TftpBlock=ext2_find_next_zero_bit(Bitmap,(Mapsize*8),0); | 
|  | /*..falling..*/ | 
|  | #endif | 
|  | case STATE_DATA: | 
|  | xp = pkt; | 
|  | s = (ushort *)pkt; | 
|  | *s++ = htons(TFTP_ACK); | 
|  | *s++ = htons(TftpBlock); | 
|  | pkt = (uchar *)s; | 
|  | len = pkt - xp; | 
|  | break; | 
|  |  | 
|  | case STATE_TOO_LARGE: | 
|  | xp = pkt; | 
|  | s = (ushort *)pkt; | 
|  | *s++ = htons(TFTP_ERROR); | 
|  | *s++ = htons(3); | 
|  | pkt = (uchar *)s; | 
|  | strcpy ((char *)pkt, "File too large"); | 
|  | pkt += 14 /*strlen("File too large")*/ + 1; | 
|  | len = pkt - xp; | 
|  | break; | 
|  |  | 
|  | case STATE_BAD_MAGIC: | 
|  | xp = pkt; | 
|  | s = (ushort *)pkt; | 
|  | *s++ = htons(TFTP_ERROR); | 
|  | *s++ = htons(2); | 
|  | pkt = (uchar *)s; | 
|  | strcpy ((char *)pkt, "File has bad magic"); | 
|  | pkt += 18 /*strlen("File has bad magic")*/ + 1; | 
|  | len = pkt - xp; | 
|  | break; | 
|  | } | 
|  |  | 
|  | NetSendUDPPacket(NetServerEther, TftpServerIP, TftpServerPort, TftpOurPort, len); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len) | 
|  | { | 
|  | ushort proto; | 
|  | ushort *s; | 
|  | int i; | 
|  |  | 
|  | if (dest != TftpOurPort) { | 
|  | #ifdef CONFIG_MCAST_TFTP | 
|  | if (Multicast | 
|  | && (!Mcast_port || (dest != Mcast_port))) | 
|  | #endif | 
|  | return; | 
|  | } | 
|  | if (TftpState != STATE_RRQ && src != TftpServerPort) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (len < 2) { | 
|  | return; | 
|  | } | 
|  | len -= 2; | 
|  | /* warning: don't use increment (++) in ntohs() macros!! */ | 
|  | s = (ushort *)pkt; | 
|  | proto = *s++; | 
|  | pkt = (uchar *)s; | 
|  | switch (ntohs(proto)) { | 
|  |  | 
|  | case TFTP_RRQ: | 
|  | case TFTP_WRQ: | 
|  | case TFTP_ACK: | 
|  | break; | 
|  | default: | 
|  | break; | 
|  |  | 
|  | case TFTP_OACK: | 
|  | debug("Got OACK: %s %s\n", | 
|  | pkt, | 
|  | pkt + strlen((char *)pkt) + 1); | 
|  | TftpState = STATE_OACK; | 
|  | TftpServerPort = src; | 
|  | /* | 
|  | * Check for 'blksize' option. | 
|  | * Careful: "i" is signed, "len" is unsigned, thus | 
|  | * something like "len-8" may give a *huge* number | 
|  | */ | 
|  | for (i=0; i+8<len; i++) { | 
|  | if (strcmp ((char*)pkt+i,"blksize") == 0) { | 
|  | TftpBlkSize = (unsigned short) | 
|  | simple_strtoul((char*)pkt+i+8,NULL,10); | 
|  | debug("Blocksize ack: %s, %d\n", | 
|  | (char*)pkt+i+8,TftpBlkSize); | 
|  | } | 
|  | #ifdef CONFIG_TFTP_TSIZE | 
|  | if (strcmp ((char*)pkt+i,"tsize") == 0) { | 
|  | TftpTsize = simple_strtoul((char*)pkt+i+6,NULL,10); | 
|  | debug("size = %s, %d\n", | 
|  | (char*)pkt+i+6, TftpTsize); | 
|  | } | 
|  | #endif | 
|  | } | 
|  | #ifdef CONFIG_MCAST_TFTP | 
|  | parse_multicast_oack((char *)pkt,len-1); | 
|  | if ((Multicast) && (!MasterClient)) | 
|  | TftpState = STATE_DATA;	/* passive.. */ | 
|  | else | 
|  | #endif | 
|  | TftpSend (); /* Send ACK */ | 
|  | break; | 
|  | case TFTP_DATA: | 
|  | if (len < 2) | 
|  | return; | 
|  | len -= 2; | 
|  | TftpBlock = ntohs(*(ushort *)pkt); | 
|  |  | 
|  | /* | 
|  | * RFC1350 specifies that the first data packet will | 
|  | * have sequence number 1. If we receive a sequence | 
|  | * number of 0 this means that there was a wrap | 
|  | * around of the (16 bit) counter. | 
|  | */ | 
|  | if (TftpBlock == 0) { | 
|  | TftpBlockWrap++; | 
|  | TftpBlockWrapOffset += TftpBlkSize * TFTP_SEQUENCE_SIZE; | 
|  | printf ("\n\t %lu MB received\n\t ", TftpBlockWrapOffset>>20); | 
|  | } | 
|  | #ifdef CONFIG_TFTP_TSIZE | 
|  | else if (TftpTsize) { | 
|  | while (TftpNumchars < NetBootFileXferSize * 50 / TftpTsize) { | 
|  | putc('#'); | 
|  | TftpNumchars++; | 
|  | } | 
|  | } | 
|  | #endif | 
|  | else { | 
|  | if (((TftpBlock - 1) % 10) == 0) { | 
|  | putc ('#'); | 
|  | } else if ((TftpBlock % (10 * HASHES_PER_LINE)) == 0) { | 
|  | puts ("\n\t "); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (TftpState == STATE_RRQ) | 
|  | debug("Server did not acknowledge timeout option!\n"); | 
|  |  | 
|  | if (TftpState == STATE_RRQ || TftpState == STATE_OACK) { | 
|  | /* first block received */ | 
|  | TftpState = STATE_DATA; | 
|  | TftpServerPort = src; | 
|  | TftpLastBlock = 0; | 
|  | TftpBlockWrap = 0; | 
|  | TftpBlockWrapOffset = 0; | 
|  |  | 
|  | #ifdef CONFIG_MCAST_TFTP | 
|  | if (Multicast) { /* start!=1 common if mcast */ | 
|  | TftpLastBlock = TftpBlock - 1; | 
|  | } else | 
|  | #endif | 
|  | if (TftpBlock != 1) {	/* Assertion */ | 
|  | printf ("\nTFTP error: " | 
|  | "First block is not block 1 (%ld)\n" | 
|  | "Starting again\n\n", | 
|  | TftpBlock); | 
|  | NetStartAgain (); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (TftpBlock == TftpLastBlock) { | 
|  | /* | 
|  | *	Same block again; ignore it. | 
|  | */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | TftpLastBlock = TftpBlock; | 
|  | TftpTimeoutMSecs = TIMEOUT; | 
|  | TftpTimeoutCountMax = TIMEOUT_COUNT; | 
|  | NetSetTimeout (TftpTimeoutMSecs, TftpTimeout); | 
|  |  | 
|  | store_block (TftpBlock - 1, pkt + 2, len); | 
|  |  | 
|  | /* | 
|  | *	Acknoledge the block just received, which will prompt | 
|  | *	the server for the next one. | 
|  | */ | 
|  | #ifdef CONFIG_MCAST_TFTP | 
|  | /* if I am the MasterClient, actively calculate what my next | 
|  | * needed block is; else I'm passive; not ACKING | 
|  | */ | 
|  | if (Multicast) { | 
|  | if (len < TftpBlkSize)  { | 
|  | TftpEndingBlock = TftpBlock; | 
|  | } else if (MasterClient) { | 
|  | TftpBlock = PrevBitmapHole = | 
|  | ext2_find_next_zero_bit( | 
|  | Bitmap, | 
|  | (Mapsize*8), | 
|  | PrevBitmapHole); | 
|  | if (TftpBlock > ((Mapsize*8) - 1)) { | 
|  | printf ("tftpfile too big\n"); | 
|  | /* try to double it and retry */ | 
|  | Mapsize<<=1; | 
|  | mcast_cleanup(); | 
|  | NetStartAgain (); | 
|  | return; | 
|  | } | 
|  | TftpLastBlock = TftpBlock; | 
|  | } | 
|  | } | 
|  | #endif | 
|  | TftpSend (); | 
|  |  | 
|  | #ifdef CONFIG_MCAST_TFTP | 
|  | if (Multicast) { | 
|  | if (MasterClient && (TftpBlock >= TftpEndingBlock)) { | 
|  | puts ("\nMulticast tftp done\n"); | 
|  | mcast_cleanup(); | 
|  | NetState = NETLOOP_SUCCESS; | 
|  | } | 
|  | } | 
|  | else | 
|  | #endif | 
|  | if (len < TftpBlkSize) { | 
|  | /* | 
|  | *	We received the whole thing.  Try to | 
|  | *	run it. | 
|  | */ | 
|  | #ifdef CONFIG_TFTP_TSIZE | 
|  | /* Print out the hash marks for the last packet received */ | 
|  | while (TftpTsize && TftpNumchars < 49) { | 
|  | putc('#'); | 
|  | TftpNumchars++; | 
|  | } | 
|  | #endif | 
|  | puts ("\ndone\n"); | 
|  | NetState = NETLOOP_SUCCESS; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case TFTP_ERROR: | 
|  | printf ("\nTFTP error: '%s' (%d)\n", | 
|  | pkt + 2, ntohs(*(ushort *)pkt)); | 
|  | puts ("Starting again\n\n"); | 
|  | #ifdef CONFIG_MCAST_TFTP | 
|  | mcast_cleanup(); | 
|  | #endif | 
|  | NetStartAgain (); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | TftpTimeout (void) | 
|  | { | 
|  | if (++TftpTimeoutCount > TftpTimeoutCountMax) { | 
|  | puts ("\nRetry count exceeded; starting again\n"); | 
|  | #ifdef CONFIG_MCAST_TFTP | 
|  | mcast_cleanup(); | 
|  | #endif | 
|  | NetStartAgain (); | 
|  | } else { | 
|  | puts ("T "); | 
|  | NetSetTimeout (TftpTimeoutMSecs, TftpTimeout); | 
|  | TftpSend (); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | void | 
|  | TftpStart (void) | 
|  | { | 
|  | char *ep;             /* Environment pointer */ | 
|  |  | 
|  | /* Allow the user to choose tftpblocksize */ | 
|  | if ((ep = getenv("tftpblocksize")) != NULL) | 
|  | TftpBlkSizeOption = simple_strtol(ep, NULL, 10); | 
|  | debug("tftp block size is %i\n", TftpBlkSizeOption); | 
|  |  | 
|  | TftpServerIP = NetServerIP; | 
|  | if (BootFile[0] == '\0') { | 
|  | sprintf(default_filename, "%02lX%02lX%02lX%02lX.img", | 
|  | NetOurIP & 0xFF, | 
|  | (NetOurIP >>  8) & 0xFF, | 
|  | (NetOurIP >> 16) & 0xFF, | 
|  | (NetOurIP >> 24) & 0xFF	); | 
|  |  | 
|  | strncpy(tftp_filename, default_filename, MAX_LEN); | 
|  | tftp_filename[MAX_LEN-1] = 0; | 
|  |  | 
|  | printf ("*** Warning: no boot file name; using '%s'\n", | 
|  | tftp_filename); | 
|  | } else { | 
|  | char *p = strchr (BootFile, ':'); | 
|  |  | 
|  | if (p == NULL) { | 
|  | strncpy(tftp_filename, BootFile, MAX_LEN); | 
|  | tftp_filename[MAX_LEN-1] = 0; | 
|  | } else { | 
|  | TftpServerIP = string_to_ip (BootFile); | 
|  | strncpy(tftp_filename, p + 1, MAX_LEN); | 
|  | tftp_filename[MAX_LEN-1] = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_NET_MULTI) | 
|  | printf ("Using %s device\n", eth_get_name()); | 
|  | #endif | 
|  | printf("TFTP from server %pI4" | 
|  | "; our IP address is %pI4", &TftpServerIP, &NetOurIP); | 
|  |  | 
|  | /* Check if we need to send across this subnet */ | 
|  | if (NetOurGatewayIP && NetOurSubnetMask) { | 
|  | IPaddr_t OurNet	= NetOurIP    & NetOurSubnetMask; | 
|  | IPaddr_t ServerNet	= TftpServerIP & NetOurSubnetMask; | 
|  |  | 
|  | if (OurNet != ServerNet) | 
|  | printf("; sending through gateway %pI4", &NetOurGatewayIP); | 
|  | } | 
|  | putc ('\n'); | 
|  |  | 
|  | printf ("Filename '%s'.", tftp_filename); | 
|  |  | 
|  | if (NetBootFileSize) { | 
|  | printf (" Size is 0x%x Bytes = ", NetBootFileSize<<9); | 
|  | print_size (NetBootFileSize<<9, ""); | 
|  | } | 
|  |  | 
|  | putc ('\n'); | 
|  |  | 
|  | printf ("Load address: 0x%lx\n", load_addr); | 
|  |  | 
|  | puts ("Loading: *\b"); | 
|  |  | 
|  | TftpTimeoutMSecs = TftpRRQTimeoutMSecs; | 
|  | TftpTimeoutCountMax = TftpRRQTimeoutCountMax; | 
|  |  | 
|  | NetSetTimeout (TftpTimeoutMSecs, TftpTimeout); | 
|  | NetSetHandler (TftpHandler); | 
|  |  | 
|  | TftpServerPort = WELL_KNOWN_PORT; | 
|  | TftpTimeoutCount = 0; | 
|  | TftpState = STATE_RRQ; | 
|  | /* Use a pseudo-random port unless a specific port is set */ | 
|  | TftpOurPort = 1024 + (get_timer(0) % 3072); | 
|  |  | 
|  | #ifdef CONFIG_TFTP_PORT | 
|  | if ((ep = getenv("tftpdstp")) != NULL) { | 
|  | TftpServerPort = simple_strtol(ep, NULL, 10); | 
|  | } | 
|  | if ((ep = getenv("tftpsrcp")) != NULL) { | 
|  | TftpOurPort= simple_strtol(ep, NULL, 10); | 
|  | } | 
|  | #endif | 
|  | TftpBlock = 0; | 
|  |  | 
|  | /* zero out server ether in case the server ip has changed */ | 
|  | memset(NetServerEther, 0, 6); | 
|  | /* Revert TftpBlkSize to dflt */ | 
|  | TftpBlkSize = TFTP_BLOCK_SIZE; | 
|  | #ifdef CONFIG_MCAST_TFTP | 
|  | mcast_cleanup(); | 
|  | #endif | 
|  | #ifdef CONFIG_TFTP_TSIZE | 
|  | TftpTsize = 0; | 
|  | TftpNumchars = 0; | 
|  | #endif | 
|  |  | 
|  | TftpSend (); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_MCAST_TFTP | 
|  | /* Credits: atftp project. | 
|  | */ | 
|  |  | 
|  | /* pick up BcastAddr, Port, and whether I am [now] the master-client. * | 
|  | * Frame: | 
|  | *    +-------+-----------+---+-------~~-------+---+ | 
|  | *    |  opc  | multicast | 0 | addr, port, mc | 0 | | 
|  | *    +-------+-----------+---+-------~~-------+---+ | 
|  | * The multicast addr/port becomes what I listen to, and if 'mc' is '1' then | 
|  | * I am the new master-client so must send ACKs to DataBlocks.  If I am not | 
|  | * master-client, I'm a passive client, gathering what DataBlocks I may and | 
|  | * making note of which ones I got in my bitmask. | 
|  | * In theory, I never go from master->passive.. | 
|  | * .. this comes in with pkt already pointing just past opc | 
|  | */ | 
|  | static void parse_multicast_oack(char *pkt, int len) | 
|  | { | 
|  | int i; | 
|  | IPaddr_t addr; | 
|  | char *mc_adr, *port,  *mc; | 
|  |  | 
|  | mc_adr=port=mc=NULL; | 
|  | /* march along looking for 'multicast\0', which has to start at least | 
|  | * 14 bytes back from the end. | 
|  | */ | 
|  | for (i=0;i<len-14;i++) | 
|  | if (strcmp (pkt+i,"multicast") == 0) | 
|  | break; | 
|  | if (i >= (len-14)) /* non-Multicast OACK, ign. */ | 
|  | return; | 
|  |  | 
|  | i+=10; /* strlen multicast */ | 
|  | mc_adr = pkt+i; | 
|  | for (;i<len;i++) { | 
|  | if (*(pkt+i) == ',') { | 
|  | *(pkt+i) = '\0'; | 
|  | if (port) { | 
|  | mc = pkt+i+1; | 
|  | break; | 
|  | } else { | 
|  | port = pkt+i+1; | 
|  | } | 
|  | } | 
|  | } | 
|  | if (!port || !mc_adr || !mc ) return; | 
|  | if (Multicast && MasterClient) { | 
|  | printf ("I got a OACK as master Client, WRONG!\n"); | 
|  | return; | 
|  | } | 
|  | /* ..I now accept packets destined for this MCAST addr, port */ | 
|  | if (!Multicast) { | 
|  | if (Bitmap) { | 
|  | printf ("Internal failure! no mcast.\n"); | 
|  | free(Bitmap); | 
|  | Bitmap=NULL; | 
|  | ProhibitMcast=1; | 
|  | return ; | 
|  | } | 
|  | /* I malloc instead of pre-declare; so that if the file ends | 
|  | * up being too big for this bitmap I can retry | 
|  | */ | 
|  | if (!(Bitmap = malloc (Mapsize))) { | 
|  | printf ("No Bitmap, no multicast. Sorry.\n"); | 
|  | ProhibitMcast=1; | 
|  | return; | 
|  | } | 
|  | memset (Bitmap,0,Mapsize); | 
|  | PrevBitmapHole = 0; | 
|  | Multicast = 1; | 
|  | } | 
|  | addr = string_to_ip(mc_adr); | 
|  | if (Mcast_addr != addr) { | 
|  | if (Mcast_addr) | 
|  | eth_mcast_join(Mcast_addr, 0); | 
|  | if (eth_mcast_join(Mcast_addr=addr, 1)) { | 
|  | printf ("Fail to set mcast, revert to TFTP\n"); | 
|  | ProhibitMcast=1; | 
|  | mcast_cleanup(); | 
|  | NetStartAgain(); | 
|  | } | 
|  | } | 
|  | MasterClient = (unsigned char)simple_strtoul((char *)mc,NULL,10); | 
|  | Mcast_port = (unsigned short)simple_strtoul(port,NULL,10); | 
|  | printf ("Multicast: %s:%d [%d]\n", mc_adr, Mcast_port, MasterClient); | 
|  | return; | 
|  | } | 
|  |  | 
|  | #endif /* Multicast TFTP */ | 
|  |  | 
|  | #endif |