Merge branch 'master' of git://git.denx.de/u-boot-arm * 'master' of git://git.denx.de/u-boot-arm: drivers/rtc: add Marvell Integrated RTC Armada100: Add Board Support for Marvell GuruPlug-Display Armada100: MFP macro naming correction arm: auto gen asm-offsets.h for mb86r0x spear: fix build errors for spear3xx/spear600 platforms cosmetic: arm: lib/board.c: Coding Style cleanup ARM: versatile: fix board support SMDKV310: Enable device tree support SMDKV310: MMC_SPL: Fix building when using "make O=" arm: a320: enable tagged list support arm: a320: fix multiline comment style ARMv7: u8500_href: Add missing header to fix compiler warning Removed unused define, CONFIG_ARMV7. avr32: add grasshopper (ICnova AP7000) board AT91/SPI: fix atmel_dataflash_spi.c to allow building without warnings MAKEALL: remove AT91 boards that are in boards.cfg AT91: Makes AT91SAM9263-EK build correctly against u-boot-atmel/master AT91: Makes AT91SAM9263 SoC build correctly against u-boot-atmel/master AT91: Board fix for AT91SAM9261-EK AT91: SoC fix at91sam9261_matrix.h AT91: Makes AT91SAM9RL-EK build correctly against u-boot-atmel/master AT91: Makes AT91SAM9RL SoC build correctly against u-boot-atmel/master AT91: change common at91sam9261 files to compile with new scheme AT91: fix mistake in at91sam9260_devices.c(spi1_hw_init) a/a/c/arm920t/at91/reset.c: drop obsolete CONFIG_AT91RM9200_USART README: fix arm920t/at91 path net/eth.c: drop obsolete at91rm9200 support README.at91-soc: remove AT91(RM9200) joining notice a/a/c/arm920t/cpu.c: remove CONFIG_AT91_LEGACY warning MAKEALL: remove obsolete at91rm9200 soc ARM: remove obsolete at91rm9200 omap4: clock init support for omap4460 omap4: support TPS programming omap: reuse omap3 gpio support in omap4 omap4: sdram init changes for omap4460 omap4: add omap4460 revision detection mkimage: Add OMAP boot image support omap: add MMC and FAT support to SPL omap: add basic SPL support armv7: start.S: fixes and enhancements for SPL omap4: automatic sdram detection omap4: calculate EMIF register values omap4: add sdram init support omap4: add clock support omap4: add OMAP4430 revision check omap4: cleanup pin mux data omap4: utility function to identify the context of hw init DA8xx: fix LPSC constants DA8xx: switch an enum to defines for consistency DA8xx: add MMC/SD controller addresses DaVinci EMAC: declare function for all DA8xx CPUs DA8xx: add generic GPIO driver DaVinci: rename gpio_defs.h to gpio.h omap3evm: eth: Include functions only when necessary omap3evm: Update ethernet reset sequence for Rev.G board omap3evm: eth: split function setup_net_chip omap3: Include array definition only when it is used omap730p2: fix build breaks omap2420h4: fix build breaks omap1610inn: fix build breaks omap1510inn: fix build breaks omap5912osk: fix build breaks omap1610h2: fix build breaks
diff --git a/arch/powerpc/cpu/mpc512x/diu.c b/arch/powerpc/cpu/mpc512x/diu.c index 9dc1e48..b7db249 100644 --- a/arch/powerpc/cpu/mpc512x/diu.c +++ b/arch/powerpc/cpu/mpc512x/diu.c
@@ -56,5 +56,5 @@ unsigned int pixel_format = 0x88883316; debug("mpc5121_diu_init\n"); - return fsl_diu_init(xres, pixel_format, 0); + return fsl_diu_init(xres, yres, pixel_format, 0); }
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c index 3011bb80..358a432 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
@@ -83,5 +83,5 @@ printf("DIU: Switching to %s monitor @ %ux%u\n", name, xres, yres); out_8(&pixis->brdcfg0, temp); - return fsl_diu_init(xres, pixel_format, gamma_fix); + return fsl_diu_init(xres, yres, pixel_format, gamma_fix); }
diff --git a/board/freescale/p1022ds/diu.c b/board/freescale/p1022ds/diu.c index 7d1f6aa..cef81ce 100644 --- a/board/freescale/p1022ds/diu.c +++ b/board/freescale/p1022ds/diu.c
@@ -139,7 +139,7 @@ clrsetbits_be32(&gur->pmuxcr, PMUXCR_ELBCDIU_MASK, PMUXCR_ELBCDIU_DIU); pmuxcr = in_be32(&gur->pmuxcr); - return fsl_diu_init(xres, pixel_format, 0); + return fsl_diu_init(xres, yres, pixel_format, 0); } /*
diff --git a/drivers/video/fsl_diu_fb.c b/drivers/video/fsl_diu_fb.c index 0709849..e1d6c26 100644 --- a/drivers/video/fsl_diu_fb.c +++ b/drivers/video/fsl_diu_fb.c
@@ -78,13 +78,9 @@ unsigned int flag; }; -#define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */ -#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */ -#define FB_VMODE_NONINTERLACED 0 /* non interlaced */ - /* This setting is used for the ifm pdm360ng with PRIMEVIEW PM070WL3 */ -static struct fb_videomode fsl_diu_mode_800 = { - .name = "800x600-60", +static struct fb_videomode fsl_diu_mode_800_480 = { + .name = "800x480-60", .refresh = 60, .xres = 800, .yres = 480, @@ -99,13 +95,30 @@ .vmode = FB_VMODE_NONINTERLACED }; +/* For the SHARP LQ084S3LG01, used on the P1022DS board */ +static struct fb_videomode fsl_diu_mode_800_600 = { + .name = "800x600-60", + .refresh = 60, + .xres = 800, + .yres = 600, + .pixclock = 25000, + .left_margin = 88, + .right_margin = 40, + .upper_margin = 23, + .lower_margin = 1, + .hsync_len = 128, + .vsync_len = 4, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED +}; + /* * These parameters give default parameters * for video output 1024x768, * FIXME - change timing to proper amounts * hsync 31.5kHz, vsync 60Hz */ -static struct fb_videomode fsl_diu_mode_1024 = { +static struct fb_videomode fsl_diu_mode_1024_768 = { .name = "1024x768-60", .refresh = 60, .xres = 1024, @@ -121,7 +134,7 @@ .vmode = FB_VMODE_NONINTERLACED }; -static struct fb_videomode fsl_diu_mode_1280 = { +static struct fb_videomode fsl_diu_mode_1280_1024 = { .name = "1280x1024-60", .refresh = 60, .xres = 1280, @@ -263,7 +276,7 @@ return ad; } -int fsl_diu_init(int xres, u32 pixel_format, int gamma_fix) +int fsl_diu_init(u16 xres, u16 yres, u32 pixel_format, int gamma_fix) { struct fb_videomode *fsl_diu_mode_db; struct diu_ad *ad; @@ -274,15 +287,23 @@ struct diu_addr gamma; struct diu_addr cursor; - switch (xres) { - case 800: - fsl_diu_mode_db = &fsl_diu_mode_800; +/* Convert the X,Y resolution pair into a single number */ +#define RESOLUTION(x, y) (((u32)(x) << 16) | (y)) + + switch (RESOLUTION(xres, yres)) { + case RESOLUTION(800, 480): + fsl_diu_mode_db = &fsl_diu_mode_800_480; break; - case 1280: - fsl_diu_mode_db = &fsl_diu_mode_1280; + case RESOLUTION(800, 600): + fsl_diu_mode_db = &fsl_diu_mode_800_600; + case RESOLUTION(1024, 768): + fsl_diu_mode_db = &fsl_diu_mode_1024_768; + case RESOLUTION(1280, 1024): + fsl_diu_mode_db = &fsl_diu_mode_1280_1024; break; default: - fsl_diu_mode_db = &fsl_diu_mode_1024; + printf("DIU: Unsupported resolution %ux%u\n", xres, yres); + return -1; } /* The AD struct for the dummy framebuffer and the FB itself */
diff --git a/drivers/video/mb862xx.c b/drivers/video/mb862xx.c index edf34aa..1a4ba82 100644 --- a/drivers/video/mb862xx.c +++ b/drivers/video/mb862xx.c
@@ -189,13 +189,22 @@ } #if defined(CONFIG_VIDEO_CORALP) +/* use CCF and MMR parameters for Coral-P Eval. Board as default */ +#ifndef CONFIG_SYS_MB862xx_CCF +#define CONFIG_SYS_MB862xx_CCF 0x00090000 +#endif +#ifndef CONFIG_SYS_MB862xx_MMR +#define CONFIG_SYS_MB862xx_MMR 0x11d7fa13 +#endif + unsigned int pci_video_init (void) { GraphicDevice *dev = &mb862xx; pci_dev_t devbusfn; + u16 device; if ((devbusfn = pci_find_devices (supported, 0)) < 0) { - puts ("PCI video controller not found!\n"); + puts("controller not present\n"); return 0; } @@ -212,10 +221,25 @@ dev->pciBase = dev->frameAdrs; - /* Setup clocks and memory mode for Coral-P Eval. Board */ - HOST_WR_REG (GC_CCF, 0x00090000); + puts("Coral-"); + + pci_read_config_word(devbusfn, PCI_DEVICE_ID, &device); + switch (device) { + case PCI_DEVICE_ID_CORAL_P: + puts("P\n"); + break; + case PCI_DEVICE_ID_CORAL_PA: + puts("PA\n"); + break; + default: + puts("Unknown\n"); + return 0; + } + + /* Setup clocks and memory mode for Coral-P(A) */ + HOST_WR_REG(GC_CCF, CONFIG_SYS_MB862xx_CCF); udelay (200); - HOST_WR_REG (GC_MMR, 0x11d7fa13); + HOST_WR_REG(GC_MMR, CONFIG_SYS_MB862xx_MMR); udelay (100); return dev->frameAdrs; } @@ -235,8 +259,6 @@ if (!pci_video_init ()) return 0; - puts ("CoralP\n"); - tmp = 0; videomode = 0x310; /* get video mode via environment */
diff --git a/drivers/video/mb86r0xgdc.c b/drivers/video/mb86r0xgdc.c index 3bdc1db..5425c9d 100644 --- a/drivers/video/mb86r0xgdc.c +++ b/drivers/video/mb86r0xgdc.c
@@ -77,8 +77,7 @@ } /* Fill memory with white */ - for (i = 0; i < var_mode.xres * var_mode.yres / 2; i++) - *videomem++ = 0xFFFFFFFF; + memset(videomem, 0xFF, var_mode.xres * var_mode.yres * 2); mb86r0x.winSizeX = var_mode.xres; mb86r0x.winSizeY = var_mode.yres;
diff --git a/include/fsl_diu_fb.h b/include/fsl_diu_fb.h index 4c89f4b..a58e7e2 100644 --- a/include/fsl_diu_fb.h +++ b/include/fsl_diu_fb.h
@@ -24,7 +24,7 @@ * MA 02111-1307 USA */ -int fsl_diu_init(int xres, u32 pixel_format, int gamma_fix); +int fsl_diu_init(u16 xres, u16 yres, u32 pixel_format, int gamma_fix); /* Prototypes for external board-specific functions */ int platform_diu_init(unsigned int xres, unsigned int yres, const char *port);