| /* |
| * (C) Copyright 2014 DENX Software Engineering |
| * Heiko Schocher <hs@denx.de> |
| * |
| * Based on: |
| * Copyright (C) 2013 Atmel Corporation |
| * Bo Shen <voice.shen@atmel.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/arch/at91_common.h> |
| #include <asm/arch/at91sam9_matrix.h> |
| #include <asm/arch/at91_pit.h> |
| #include <asm/arch/at91_pmc.h> |
| #include <asm/arch/at91_rstc.h> |
| #include <asm/arch/at91_wdt.h> |
| #include <asm/arch/clk.h> |
| #include <spl.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static void enable_ext_reset(void) |
| { |
| struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC; |
| |
| writel(AT91_RSTC_KEY | AT91_RSTC_MR_URSTEN, &rstc->mr); |
| } |
| |
| void lowlevel_clock_init(void) |
| { |
| struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; |
| |
| if (!(readl(&pmc->sr) & AT91_PMC_MOSCS)) { |
| /* Enable Main Oscillator */ |
| writel(AT91_PMC_MOSCS | (0x40 << 8), &pmc->mor); |
| |
| /* Wait until Main Oscillator is stable */ |
| while (!(readl(&pmc->sr) & AT91_PMC_MOSCS)) |
| ; |
| } |
| |
| /* After stabilization, switch to Main Oscillator */ |
| if ((readl(&pmc->mckr) & AT91_PMC_CSS) == AT91_PMC_CSS_SLOW) { |
| unsigned long tmp; |
| |
| tmp = readl(&pmc->mckr); |
| tmp &= ~AT91_PMC_CSS; |
| tmp |= AT91_PMC_CSS_MAIN; |
| writel(tmp, &pmc->mckr); |
| while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) |
| ; |
| |
| tmp &= ~AT91_PMC_PRES; |
| tmp |= AT91_PMC_PRES_1; |
| writel(tmp, &pmc->mckr); |
| while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) |
| ; |
| } |
| |
| return; |
| } |
| |
| void __weak matrix_init(void) |
| { |
| } |
| |
| void __weak at91_spl_board_init(void) |
| { |
| } |
| |
| void spl_board_init(void) |
| { |
| struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; |
| |
| lowlevel_clock_init(); |
| at91_disable_wdt(); |
| |
| /* |
| * At this stage the main oscillator is supposed to be enabled |
| * PCK = MCK = MOSC |
| */ |
| writel(0x00, &pmc->pllicpr); |
| |
| /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */ |
| at91_plla_init(CONFIG_SYS_AT91_PLLA); |
| |
| /* PCK = PLLA = 2 * MCK */ |
| at91_mck_init(CONFIG_SYS_MCKR); |
| |
| /* Switch MCK on PLLA output */ |
| at91_mck_init(CONFIG_SYS_MCKR_CSS); |
| |
| #if defined(CONFIG_SYS_AT91_PLLB) |
| /* Configure PLLB */ |
| at91_pllb_init(CONFIG_SYS_AT91_PLLB); |
| #endif |
| |
| /* Enable External Reset */ |
| enable_ext_reset(); |
| |
| /* Initialize matrix */ |
| matrix_init(); |
| |
| gd->arch.mck_rate_hz = CONFIG_SYS_MASTER_CLOCK; |
| /* |
| * init timer long enough for using in spl. |
| */ |
| timer_init(); |
| |
| /* enable clocks for all PIOs */ |
| at91_periph_clk_enable(ATMEL_ID_PIOA); |
| at91_periph_clk_enable(ATMEL_ID_PIOB); |
| at91_periph_clk_enable(ATMEL_ID_PIOC); |
| /* init console */ |
| at91_seriald_hw_init(); |
| preloader_console_init(); |
| |
| mem_init(); |
| |
| at91_spl_board_init(); |
| } |