blob: a34a9a84c8f211f39bd9d776d83e6b390eaf7d83 [file] [log] [blame] [edit]
/*
* Copyright (C) 2013 Gateworks Corporation
*
* Author: Tim Harvey <tharvey@gateworks.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/errno.h>
#include <common.h>
#include <i2c.h>
#include <linux/ctype.h>
#include "gsc.h"
#define MINMAX(n, percent) ((n)*(100-percent)/100), ((n)*(100+percent)/100)
/*
* The Gateworks System Controller will fail to ACK a master transaction if
* it is busy, which can occur during its 1HZ timer tick while reading ADC's.
* When this does occur, it will never be busy long enough to fail more than
* 2 back-to-back transfers. Thus we wrap i2c_read and i2c_write with
* 3 retries.
*/
int gsc_i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
{
int retry = 3;
int n = 0;
int ret;
while (n++ < retry) {
ret = i2c_read(chip, addr, alen, buf, len);
if (!ret)
break;
debug("%s: 0x%02x 0x%02x retry%d: %d\n", __func__, chip, addr,
n, ret);
if (ret != -ENODEV)
break;
mdelay(10);
}
return ret;
}
int gsc_i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
{
int retry = 3;
int n = 0;
int ret;
while (n++ < retry) {
ret = i2c_write(chip, addr, alen, buf, len);
if (!ret)
break;
debug("%s: 0x%02x 0x%02x retry%d: %d\n", __func__, chip, addr,
n, ret);
if (ret != -ENODEV)
break;
mdelay(10);
}
mdelay(100);
return ret;
}
#ifdef CONFIG_CMD_GSC
static void read_hwmon(const char *name, uint reg, uint size, uint low,
uint high)
{
unsigned char buf[3];
uint ui;
printf("%-8s:", name);
memset(buf, 0, sizeof(buf));
if (gsc_i2c_read(GSC_HWMON_ADDR, reg, 1, buf, size)) {
puts("fRD\n");
} else {
ui = buf[0] | (buf[1]<<8) | (buf[2]<<16);
if (ui == 0xffffff)
printf("invalid");
else if (ui < low)
printf("%d Failed - Low", ui);
else if (ui > high)
printf("%d Failed - High", ui);
else
printf("%d", ui);
}
puts("\n");
}
int do_gsc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
const char *model = getenv("model");
i2c_set_bus_num(0);
read_hwmon("Temp", GSC_HWMON_TEMP, 2, 0, 9000);
read_hwmon("VIN", GSC_HWMON_VIN, 3, 8000, 60000);
read_hwmon("VBATT", GSC_HWMON_VBATT, 3, 1800, 3500);
read_hwmon("VDD_3P3", GSC_HWMON_VDD_3P3, 3, MINMAX(3300, 10));
read_hwmon("VDD_HIGH", GSC_HWMON_VDD_HIGH, 3, MINMAX(3000, 10));
read_hwmon("VDD_DDR", GSC_HWMON_VDD_DDR, 3, MINMAX(1500, 10));
read_hwmon("VDD_5P0", GSC_HWMON_VDD_5P0, 3, MINMAX(5000, 10));
read_hwmon("VDD_2P5", GSC_HWMON_VDD_2P5, 3, MINMAX(2500, 10));
read_hwmon("VDD_1P8", GSC_HWMON_VDD_1P8, 3, MINMAX(1800, 10));
switch (model[3]) {
case '1': /* GW51xx */
read_hwmon("VDD_CORE", GSC_HWMON_VDD_CORE, 3, MINMAX(1175, 10));
read_hwmon("VDD_SOC", GSC_HWMON_VDD_SOC, 3, MINMAX(1175, 10));
break;
case '2': /* GW52xx */
case '3': /* GW53xx */
read_hwmon("VDD_CORE", GSC_HWMON_VDD_CORE, 3, MINMAX(1175, 10));
read_hwmon("VDD_SOC", GSC_HWMON_VDD_SOC, 3, MINMAX(1175, 10));
read_hwmon("VDD_1P0", GSC_HWMON_VDD_1P0, 3, MINMAX(1000, 10));
break;
case '4': /* GW54xx */
read_hwmon("VDD_CORE", GSC_HWMON_VDD_CORE, 3, MINMAX(1375, 10));
read_hwmon("VDD_SOC", GSC_HWMON_VDD_SOC, 3, MINMAX(1375, 10));
read_hwmon("VDD_1P0", GSC_HWMON_VDD_1P0, 3, MINMAX(1000, 10));
break;
case '5': /* GW55xx */
read_hwmon("VDD_CORE", GSC_HWMON_VDD_CORE, 3, MINMAX(1175, 10));
read_hwmon("VDD_SOC", GSC_HWMON_VDD_SOC, 3, MINMAX(1175, 10));
break;
}
return 0;
}
U_BOOT_CMD(gsc, 1, 1, do_gsc,
"GSC test",
""
);
#endif /* CONFIG_CMD_GSC */